chipset_enable.c

/*
 * This file is part of the flashrom project.
 *
 * Copyright (C) 2000 Silicon Integrated System Corporation
 * Copyright (C) 2005-2007 coresystems GmbH <stepan@coresystems.de>
 * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

/*
 * Contains the chipset specific flash enables.
 */

#define _LARGEFILE64_SOURCE

#include <stdio.h>
#include <pci/pci.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/mman.h>
#include <fcntl.h>
#include <unistd.h>
#include "flash.h"

unsigned long flashbase = 0;

/**
 * flashrom defaults to LPC flash devices. If a known SPI controller is found
 * and the SPI strappings are set, this will be overwritten by the probing code.
 *
 * Eventually, this will become an array when multiple flash support works.
 */

flashbus_t flashbus = BUS_TYPE_LPC;
void *spibar = NULL;

extern int ichspi_lock;

static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name)
{
	uint8_t tmp;

	/*
	 * ROM Write enable, 0xFFFC0000-0xFFFDFFFF and
	 * 0xFFFE0000-0xFFFFFFFF ROM select enable.
	 */
	tmp = pci_read_byte(dev, 0x47);
	tmp |= 0x46;
	pci_write_byte(dev, 0x47, tmp);

	return 0;
}

static int enable_flash_sis630(struct pci_dev *dev, const char *name)
{
	uint8_t b;

	/* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630. */
	b = pci_read_byte(dev, 0x40);
	pci_write_byte(dev, 0x40, b | 0xb);

	/* Flash write enable on SiS 540/630. */
	b = pci_read_byte(dev, 0x45);
	pci_write_byte(dev, 0x45, b | 0x40);

	/* The same thing on SiS 950 Super I/O side... */

	/* First probe for Super I/O on config port 0x2e. */
	OUTB(0x87, 0x2e);
	OUTB(0x01, 0x2e);
	OUTB(0x55, 0x2e);
	OUTB(0x55, 0x2e);

	if (INB(0x2f) != 0x87) {
		/* If that failed, try config port 0x4e. */
		OUTB(0x87, 0x4e);
		OUTB(0x01, 0x4e);
		OUTB(0x55, 0x4e);
		OUTB(0xaa, 0x4e);
		if (INB(0x4f) != 0x87) {
			printf("Can not access SiS 950\n");
			return -1;
		}
		OUTB(0x24, 0x4e);
		b = INB(0x4f) | 0xfc;
		OUTB(0x24, 0x4e);
		OUTB(b, 0x4f);
		OUTB(0x02, 0x4e);
		OUTB(0x02, 0x4f);
	}

	OUTB(0x24, 0x2e);
	printf("2f is %#x\n", INB(0x2f));
	b = INB(0x2f) | 0xfc;
	OUTB(0x24, 0x2e);
	OUTB(b, 0x2f);

	OUTB(0x02, 0x2e);
	OUTB(0x02, 0x2f);

	return 0;
}

/* Datasheet:
 *   - Name: 82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4)
 *   - URL: http://www.intel.com/design/intarch/datashts/290562.htm
 *   - PDF: http://www.intel.com/design/intarch/datashts/29056201.pdf
 *   - Order Number: 290562-001
 */
static int enable_flash_piix4(struct pci_dev *dev, const char *name)
{
	uint16_t old, new;
	uint16_t xbcs = 0x4e;	/* X-Bus Chip Select register. */

	old = pci_read_word(dev, xbcs);

	/* Set bit 9: 1-Meg Extended BIOS Enable (PCI master accesses to
	 *            FFF00000-FFF7FFFF are forwarded to ISA).
	 *            Note: This bit is reserved on PIIX/PIIX3/MPIIX.
	 * Set bit 7: Extended BIOS Enable (PCI master accesses to
	 *            FFF80000-FFFDFFFF are forwarded to ISA).
	 * Set bit 6: Lower BIOS Enable (PCI master, or ISA master accesses to
	 *            the lower 64-Kbyte BIOS block (E0000-EFFFF) at the top
	 *            of 1 Mbyte, or the aliases at the top of 4 Gbyte
	 *            (FFFE0000-FFFEFFFF) result in the generation of BIOSCS#.
	 * Note: Accesses to FFFF0000-FFFFFFFF are always forwarded to ISA.
	 * Set bit 2: BIOSCS# Write Enable (1=enable, 0=disable).
	 */
	if (dev->device_id == 0x122e || dev->device_id == 0x7000
	    || dev->device_id == 0x1234)
		new = old | 0x00c4; /* PIIX/PIIX3/MPIIX: Bit 9 is reserved. */
	else
		new = old | 0x02c4;

	if (new == old)
		return 0;

	pci_write_word(dev, xbcs, new);

	if (pci_read_word(dev, xbcs) != new) {
		printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name);
		return -1;
	}

	return 0;
}

/*
 * See ie. page 375 of "Intel I/O Controller Hub 7 (ICH7) Family Datasheet"
 * http://download.intel.com/design/chipsets/datashts/30701303.pdf
 */
static int enable_flash_ich(struct pci_dev *dev, const char *name,
			    int bios_cntl)
{
	uint8_t old, new;

	/*
	 * Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
	 * just treating it as 8 bit wide seems to work fine in practice.
	 */
	old = pci_read_byte(dev, bios_cntl);

	printf_debug("\nBIOS Lock Enable: %sabled, ",
		     (old & (1 << 1)) ? "en" : "dis");
	printf_debug("BIOS Write Enable: %sabled, ",
		     (old & (1 << 0)) ? "en" : "dis");
	printf_debug("BIOS_CNTL is 0x%x\n", old);

	new = old | 1;

	if (new == old)
		return 0;

	pci_write_byte(dev, bios_cntl, new);

	if (pci_read_byte(dev, bios_cntl) != new) {
		printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", bios_cntl, new, name);
		return -1;
	}

	return 0;
}

static int enable_flash_ich_4e(struct pci_dev *dev, const char *name)
{
	return enable_flash_ich(dev, name, 0x4e);
}

static int enable_flash_ich_dc(struct pci_dev *dev, const char *name)
{
	return enable_flash_ich(dev, name, 0xdc);
}

#define ICH_STRAP_RSVD 0x00
#define ICH_STRAP_SPI  0x01
#define ICH_STRAP_PCI  0x02
#define ICH_STRAP_LPC  0x03

static int enable_flash_vt8237s_spi(struct pci_dev *dev, const char *name)
{
	uint32_t mmio_base;

	mmio_base = (pci_read_long(dev, 0xbc)) << 8;
	printf_debug("MMIO base at = 0x%x\n", mmio_base);
	spibar = physmap("VT8237S MMIO registers", mmio_base, 0x70);

	printf_debug("0x6c: 0x%04x     (CLOCK/DEBUG)\n",
		     *(uint16_t *) (spibar + 0x6c));

	flashbus = BUS_TYPE_VIA_SPI;

	return 0;
}

static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name,
				   int ich_generation)
{
	int ret, i;
	uint8_t old, new, bbs, buc;
	uint16_t spibar_offset, tmp2;
	uint32_t tmp, gcs;
	void *rcrb;
	//TODO: These names are incorrect for EP80579. For that, the solution would look like the commented line
	//static const char *straps_names[] = {"SPI", "reserved", "reserved", "LPC" };
	static const char *straps_names[] = { "reserved", "SPI", "PCI", "LPC" };

	/* Enable Flash Writes */
	ret = enable_flash_ich_dc(dev, name);

	/* Get physical address of Root Complex Register Block */
	tmp = pci_read_long(dev, 0xf0) & 0xffffc000;
	printf_debug("\nRoot Complex Register Block address = 0x%x\n", tmp);

	/* Map RCBA to virtual memory */
	rcrb = physmap("ICH RCRB", tmp, 0x4000);

	gcs = *(volatile uint32_t *)(rcrb + 0x3410);
	printf_debug("GCS = 0x%x: ", gcs);
	printf_debug("BIOS Interface Lock-Down: %sabled, ",
		     (gcs & 0x1) ? "en" : "dis");
	bbs = (gcs >> 10) & 0x3;
	printf_debug("BOOT BIOS Straps: 0x%x (%s)\n", bbs, straps_names[bbs]);

	buc = *(volatile uint8_t *)(rcrb + 0x3414);
	printf_debug("Top Swap : %s\n",
		     (buc & 1) ? "enabled (A16 inverted)" : "not enabled");

	/* It seems the ICH7 does not support SPI and LPC chips at the same
	 * time. At least not with our current code. So we prevent searching
	 * on ICH7 when the southbridge is strapped to LPC
	 */

	if (ich_generation == 7 && bbs == ICH_STRAP_LPC) {
		/* No further SPI initialization required */
		return ret;
	}

	switch (ich_generation) {
	case 7:
		flashbus = BUS_TYPE_ICH7_SPI;
		spibar_offset = 0x3020;
		break;
	case 8:
		flashbus = BUS_TYPE_ICH9_SPI;
		spibar_offset = 0x3020;
		break;
	case 9:
	case 10:
	default:		/* Future version might behave the same */
		flashbus = BUS_TYPE_ICH9_SPI;
		spibar_offset = 0x3800;
		break;
	}

	/* SPIBAR is at RCRB+0x3020 for ICH[78] and RCRB+0x3800 for ICH9. */
	printf_debug("SPIBAR = 0x%x + 0x%04x\n", tmp, spibar_offset);

	/* Assign Virtual Address */
	spibar = rcrb + spibar_offset;

	switch (flashbus) {
	case BUS_TYPE_ICH7_SPI:
		printf_debug("0x00: 0x%04x     (SPIS)\n",
			     *(uint16_t *) (spibar + 0));
		printf_debug("0x02: 0x%04x     (SPIC)\n",
			     *(uint16_t *) (spibar + 2));
		printf_debug("0x04: 0x%08x (SPIA)\n",
			     *(uint32_t *) (spibar + 4));
		for (i = 0; i < 8; i++) {
			int offs;
			offs = 8 + (i * 8);
			printf_debug("0x%02x: 0x%08x (SPID%d)\n", offs,
				     *(uint32_t *) (spibar + offs), i);
			printf_debug("0x%02x: 0x%08x (SPID%d+4)\n", offs + 4,
				     *(uint32_t *) (spibar + offs + 4), i);
		}
		printf_debug("0x50: 0x%08x (BBAR)\n",
			     *(uint32_t *) (spibar + 0x50));
		printf_debug("0x54: 0x%04x     (PREOP)\n",
			     *(uint16_t *) (spibar + 0x54));
		printf_debug("0x56: 0x%04x     (OPTYPE)\n",
			     *(uint16_t *) (spibar + 0x56));
		printf_debug("0x58: 0x%08x (OPMENU)\n",
			     *(uint32_t *) (spibar + 0x58));
		printf_debug("0x5c: 0x%08x (OPMENU+4)\n",
			     *(uint32_t *) (spibar + 0x5c));
		for (i = 0; i < 4; i++) {
			int offs;
			offs = 0x60 + (i * 4);
			printf_debug("0x%02x: 0x%08x (PBR%d)\n", offs,
				     *(uint32_t *) (spibar + offs), i);
		}
		printf_debug("\n");
		if ((*(uint16_t *) spibar) & (1 << 15)) {
			printf("WARNING: SPI Configuration Lockdown activated.\n");
			ichspi_lock = 1;
		}
		ich_init_opcodes();
		break;
	case BUS_TYPE_ICH9_SPI:
		tmp2 = *(uint16_t *) (spibar + 4);
		printf_debug("0x04: 0x%04x (HSFS)\n", tmp2);
		printf_debug("FLOCKDN %i, ", (tmp2 >> 15 & 1));
		printf_debug("FDV %i, ", (tmp2 >> 14) & 1);
		printf_debug("FDOPSS %i, ", (tmp2 >> 13) & 1);
		printf_debug("SCIP %i, ", (tmp2 >> 5) & 1);
		printf_debug("BERASE %i, ", (tmp2 >> 3) & 3);
		printf_debug("AEL %i, ", (tmp2 >> 2) & 1);
		printf_debug("FCERR %i, ", (tmp2 >> 1) & 1);
		printf_debug("FDONE %i\n", (tmp2 >> 0) & 1);

		tmp = *(uint32_t *) (spibar + 0x50);
		printf_debug("0x50: 0x%08x (FRAP)\n", tmp);
		printf_debug("BMWAG %i, ", (tmp >> 24) & 0xff);
		printf_debug("BMRAG %i, ", (tmp >> 16) & 0xff);
		printf_debug("BRWA %i, ", (tmp >> 8) & 0xff);
		printf_debug("BRRA %i\n", (tmp >> 0) & 0xff);

		printf_debug("0x54: 0x%08x (FREG0)\n",
			     *(uint32_t *) (spibar + 0x54));
		printf_debug("0x58: 0x%08x (FREG1)\n",
			     *(uint32_t *) (spibar + 0x58));
		printf_debug("0x5C: 0x%08x (FREG2)\n",
			     *(uint32_t *) (spibar + 0x5C));
		printf_debug("0x60: 0x%08x (FREG3)\n",
			     *(uint32_t *) (spibar + 0x60));
		printf_debug("0x64: 0x%08x (FREG4)\n",
			     *(uint32_t *) (spibar + 0x64));
		printf_debug("0x74: 0x%08x (PR0)\n",
			     *(uint32_t *) (spibar + 0x74));
		printf_debug("0x78: 0x%08x (PR1)\n",
			     *(uint32_t *) (spibar + 0x78));
		printf_debug("0x7C: 0x%08x (PR2)\n",
			     *(uint32_t *) (spibar + 0x7C));
		printf_debug("0x80: 0x%08x (PR3)\n",
			     *(uint32_t *) (spibar + 0x80));
		printf_debug("0x84: 0x%08x (PR4)\n",
			     *(uint32_t *) (spibar + 0x84));
		printf_debug("0x90: 0x%08x (SSFS, SSFC)\n",
			     *(uint32_t *) (spibar + 0x90));
		printf_debug("0x94: 0x%04x     (PREOP)\n",
			     *(uint16_t *) (spibar + 0x94));
		printf_debug("0x96: 0x%04x     (OPTYPE)\n",
			     *(uint16_t *) (spibar + 0x96));
		printf_debug("0x98: 0x%08x (OPMENU)\n",
			     *(uint32_t *) (spibar + 0x98));
		printf_debug("0x9C: 0x%08x (OPMENU+4)\n",
			     *(uint32_t *) (spibar + 0x9C));
		printf_debug("0xA0: 0x%08x (BBAR)\n",
			     *(uint32_t *) (spibar + 0xA0));
		printf_debug("0xB0: 0x%08x (FDOC)\n",
			     *(uint32_t *) (spibar + 0xB0));
		if (tmp2 & (1 << 15)) {
			printf("WARNING: SPI Configuration Lockdown activated.\n");
			ichspi_lock = 1;
		}
		ich_init_opcodes();
		break;
	default:
		/* Nothing */
		break;
	}

	old = pci_read_byte(dev, 0xdc);
	printf_debug("SPI Read Configuration: ");
	new = (old >> 2) & 0x3;
	switch (new) {
	case 0:
	case 1:
	case 2:
		printf_debug("prefetching %sabled, caching %sabled, ",
			     (new & 0x2) ? "en" : "dis",
			     (new & 0x1) ? "dis" : "en");
		break;
	default:
		printf_debug("invalid prefetching/caching settings, ");
		break;
	}

	return ret;
}

static int enable_flash_ich7(struct pci_dev *dev, const char *name)
{
	return enable_flash_ich_dc_spi(dev, name, 7);
}

static int enable_flash_ich8(struct pci_dev *dev, const char *name)
{
	return enable_flash_ich_dc_spi(dev, name, 8);
}

static int enable_flash_ich9(struct pci_dev *dev, const char *name)
{
	return enable_flash_ich_dc_spi(dev, name, 9);
}

static int enable_flash_ich10(struct pci_dev *dev, const char *name)
{
	return enable_flash_ich_dc_spi(dev, name, 10);
}

static int enable_flash_vt823x(struct pci_dev *dev, const char *name)
{
	uint8_t val;

	/* enable ROM decode range (1MB) FFC00000 - FFFFFFFF */
	pci_write_byte(dev, 0x41, 0x7f);

	/* ROM write enable */
	val = pci_read_byte(dev, 0x40);
	val |= 0x10;
	pci_write_byte(dev, 0x40, val);

	if (pci_read_byte(dev, 0x40) != val) {
		printf("\nWARNING: Failed to enable ROM Write on \"%s\"\n",
		       name);
		return -1;
	}

	return 0;
}

static int enable_flash_cs5530(struct pci_dev *dev, const char *name)
{
	uint8_t reg8;

#define DECODE_CONTROL_REG2		0x5b	/* F0 index 0x5b */
#define ROM_AT_LOGIC_CONTROL_REG	0x52	/* F0 index 0x52 */

#define LOWER_ROM_ADDRESS_RANGE		(1 << 0)
#define ROM_WRITE_ENABLE		(1 << 1)
#define UPPER_ROM_ADDRESS_RANGE		(1 << 2)
#define BIOS_ROM_POSITIVE_DECODE	(1 << 5)

	/* Decode 0x000E0000-0x000FFFFF (128 KB), not just 64 KB, and
	 * decode 0xFF000000-0xFFFFFFFF (16 MB), not just 256 KB.
	 * Make the configured ROM areas writable.
	 */
	reg8 = pci_read_byte(dev, ROM_AT_LOGIC_CONTROL_REG);
	reg8 |= LOWER_ROM_ADDRESS_RANGE;
	reg8 |= UPPER_ROM_ADDRESS_RANGE;
	reg8 |= ROM_WRITE_ENABLE;
	pci_write_byte(dev, ROM_AT_LOGIC_CONTROL_REG, reg8);

	/* Set positive decode on ROM. */
	reg8 = pci_read_byte(dev, DECODE_CONTROL_REG2);
	reg8 |= BIOS_ROM_POSITIVE_DECODE;
	pci_write_byte(dev, DECODE_CONTROL_REG2, reg8);

	return 0;
}

/**
 * Geode systems write protect the BIOS via RCONFs (cache settings similar
 * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22. Reading and
 * writing to MSRs, however requires instructions rdmsr/wrmsr, which are
 * ring0 privileged instructions so only the kernel can do the read/write.
 * This function, therefore, requires that the msr kernel module be loaded
 * to access these instructions from user space using device /dev/cpu/0/msr.
 *
 * This hard-coded location could have potential problems on SMP machines
 * since it assumes cpu0, but it is safe on the Geode which is not SMP.
 *
 * Geode systems also write protect the NOR flash chip itself via MSR_NORF_CTL.
 * To enable write to NOR Boot flash for the benefit of systems that have such
 * a setup, raise MSR 0x51400018 WE_CS3 (write enable Boot Flash Chip Select).
 *
 * This is probably not portable beyond Linux.
 */
static int enable_flash_cs5536(struct pci_dev *dev, const char *name)
{
#define MSR_RCONF_DEFAULT	0x1808
#define MSR_NORF_CTL		0x51400018

	int fd_msr;
	unsigned char buf[8];

	fd_msr = open("/dev/cpu/0/msr", O_RDWR);
	if (!fd_msr) {
		perror("open msr");
		return -1;
	}

	if (lseek64(fd_msr, (off64_t) MSR_RCONF_DEFAULT, SEEK_SET) == -1) {
		perror("lseek64");
		printf("Cannot operate on MSR. Did you run 'modprobe msr'?\n");
		close(fd_msr);
		return -1;
	}

	if (read(fd_msr, buf, 8) != 8) {
		perror("read msr");
		close(fd_msr);
		return -1;
	}

	if (buf[7] != 0x22) {
		buf[7] &= 0xfb;
		if (lseek64(fd_msr, (off64_t) MSR_RCONF_DEFAULT,
			    SEEK_SET) == -1) {
			perror("lseek64");
			close(fd_msr);
			return -1;
		}

		if (write(fd_msr, buf, 8) < 0) {
			perror("msr write");
			close(fd_msr);
			return -1;
		}
	}

	if (lseek64(fd_msr, (off64_t) MSR_NORF_CTL, SEEK_SET) == -1) {
		perror("lseek64");
		close(fd_msr);
		return -1;
	}

	if (read(fd_msr, buf, 8) != 8) {
		perror("read msr");
		close(fd_msr);
		return -1;
	}

	/* Raise WE_CS3 bit. */
	buf[0] |= 0x08;

	if (lseek64(fd_msr, (off64_t) MSR_NORF_CTL, SEEK_SET) == -1) {
		perror("lseek64");
		close(fd_msr);
		return -1;
	}
	if (write(fd_msr, buf, 8) < 0) {
		perror("msr write");
		close(fd_msr);
		return -1;
	}

	close(fd_msr);

#undef MSR_RCONF_DEFAULT
#undef MSR_NORF_CTL
	return 0;
}

static int enable_flash_sc1100(struct pci_dev *dev, const char *name)
{
	uint8_t new;

	pci_write_byte(dev, 0x52, 0xee);

	new = pci_read_byte(dev, 0x52);

	if (new != 0xee) {
		printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x52, new, name);
		return -1;
	}

	return 0;
}

static int enable_flash_sis5595(struct pci_dev *dev, const char *name)
{
	uint8_t new, newer;

	new = pci_read_byte(dev, 0x45);

	new &= (~0x20);		/* Clear bit 5. */
	new |= 0x4;		/* Set bit 2. */

	pci_write_byte(dev, 0x45, new);

	newer = pci_read_byte(dev, 0x45);
	if (newer != new) {
		printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name);
		printf("Stuck at 0x%x\n", newer);
		return -1;
	}

	/* Extended BIOS enable = 1, Lower BIOS Enable = 1 */
	new = pci_read_byte(dev, 0x40);
	new &= 0xFB;
	new |= 0x3;
	pci_write_byte(dev, 0x40, new);
	newer = pci_read_byte(dev, 0x40);
	if (newer != new) {
		printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
		printf("Stuck at 0x%x\n", newer);
		return -1;
	}
	return 0;
}

/* Works for AMD-8111, VIA VT82C586A/B, VIA VT82C686A/B. */
static int enable_flash_amd8111(struct pci_dev *dev, const char *name)
{
	uint8_t old, new;

	/* Enable decoding at 0xffb00000 to 0xffffffff. */
	old = pci_read_byte(dev, 0x43);
	new = old | 0xC0;
	if (new != old) {
		pci_write_byte(dev, 0x43, new);
		if (pci_read_byte(dev, 0x43) != new) {
			printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x43, new, name);
		}
	}

	/* Enable 'ROM write' bit. */
	old = pci_read_byte(dev, 0x40);
	new = old | 0x01;
	if (new == old)
		return 0;
	pci_write_byte(dev, 0x40, new);

	if (pci_read_byte(dev, 0x40) != new) {
		printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name);
		return -1;
	}

	return 0;
}

static int enable_flash_sb600(struct pci_dev *dev, const char *name)
{
	uint32_t tmp, low_bits, num;
	uint8_t reg;

	low_bits = tmp = pci_read_long(dev, 0xa0);
	low_bits &= ~0xffffc000; /* for mmap aligning requirements */
	low_bits &= 0xfffffff0;	/* remove low 4 bits */
	tmp &= 0xffffc000;
	printf_debug("SPI base address is at 0x%x\n", tmp + low_bits);

	sb600_spibar = physmap("SB600 SPI registers", tmp, 0x4000);
	sb600_spibar += low_bits;

	/* Clear ROM protect 0-3. */
	for (reg = 0x50; reg < 0x60; reg += 4) {
		num = pci_read_long(dev, reg);
		num &= 0xfffffffc;
		pci_write_byte(dev, reg, num);
	}

	flashbus = BUS_TYPE_SB600_SPI;

	/* Enable SPI ROM in SB600 PM register. */
	OUTB(0x8f, 0xcd6);
	OUTB(0x0e, 0xcd7);

	return 0;
}

static int enable_flash_ck804(struct pci_dev *dev, const char *name)
{
	uint8_t old, new;

	old = pci_read_byte(dev, 0x88);
	new = old | 0xc0;
	if (new != old) {
		pci_write_byte(dev, 0x88, new);
		if (pci_read_byte(dev, 0x88) != new) {
			printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x88, new, name);
		}
	}

	old = pci_read_byte(dev, 0x6d);
	new = old | 0x01;
	if (new == old)
		return 0;
	pci_write_byte(dev, 0x6d, new);

	if (pci_read_byte(dev, 0x6d) != new) {
		printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
		return -1;
	}

	return 0;
}

/* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
static int enable_flash_sb400(struct pci_dev *dev, const char *name)
{
	uint8_t tmp;
	struct pci_filter f;
	struct pci_dev *smbusdev;

	/* Look for the SMBus device. */
	pci_filter_init((struct pci_access *)0, &f);
	f.vendor = 0x1002;
	f.device = 0x4372;

	for (smbusdev = pacc->devices; smbusdev; smbusdev = smbusdev->next) {
		if (pci_filter_match(&f, smbusdev))
			break;
	}

	if (!smbusdev) {
		fprintf(stderr, "ERROR: SMBus device not found. Aborting.\n");
		exit(1);
	}

	/* Enable some SMBus stuff. */
	tmp = pci_read_byte(smbusdev, 0x79);
	tmp |= 0x01;
	pci_write_byte(smbusdev, 0x79, tmp);

	/* Change southbridge. */
	tmp = pci_read_byte(dev, 0x48);
	tmp |= 0x21;
	pci_write_byte(dev, 0x48, tmp);

	/* Now become a bit silly. */
	tmp = INB(0xc6f);
	OUTB(tmp, 0xeb);
	OUTB(tmp, 0xeb);
	tmp |= 0x40;
	OUTB(tmp, 0xc6f);
	OUTB(tmp, 0xeb);
	OUTB(tmp, 0xeb);

	return 0;
}

static int enable_flash_mcp55(struct pci_dev *dev, const char *name)
{
	uint8_t old, new, byte;
	uint16_t word;

	/* Set the 0-16 MB enable bits. */
	byte = pci_read_byte(dev, 0x88);
	byte |= 0xff;		/* 256K */
	pci_write_byte(dev, 0x88, byte);
	byte = pci_read_byte(dev, 0x8c);
	byte |= 0xff;		/* 1M */
	pci_write_byte(dev, 0x8c, byte);
	word = pci_read_word(dev, 0x90);
	word |= 0x7fff;		/* 16M */
	pci_write_word(dev, 0x90, word);

	old = pci_read_byte(dev, 0x6d);
	new = old | 0x01;
	if (new == old)
		return 0;
	pci_write_byte(dev, 0x6d, new);

	if (pci_read_byte(dev, 0x6d) != new) {
		printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name);
		return -1;
	}

	return 0;
}

static int enable_flash_ht1000(struct pci_dev *dev, const char *name)
{
	uint8_t byte;

	/* Set the 4MB enable bit. */
	byte = pci_read_byte(dev, 0x41);
	byte |= 0x0e;
	pci_write_byte(dev, 0x41, byte);

	byte = pci_read_byte(dev, 0x43);
	byte |= (1 << 4);
	pci_write_byte(dev, 0x43, byte);

	return 0;
}

/**
 * Usually on the x86 architectures (and on other PC-like platforms like some
 * Alphas or Itanium) the system flash is mapped right below 4G. On the AMD
 * Elan SC520 only a small piece of the system flash is mapped there, but the
 * complete flash is mapped somewhere below 1G. The position can be determined
 * by the BOOTCS PAR register.
 */
static int get_flashbase_sc520(struct pci_dev *dev, const char *name)
{
	int i, bootcs_found = 0;
	uint32_t parx = 0;
	void *mmcr;

	/* 1. Map MMCR */
	mmcr = physmap("Elan SC520 MMCR", 0xfffef000, getpagesize());

	/* 2. Scan PAR0 (0x88) - PAR15 (0xc4) for
	 *    BOOTCS region (PARx[31:29] = 100b)e
	 */
	for (i = 0x88; i <= 0xc4; i += 4) {
		parx = *(volatile uint32_t *)(mmcr + i);
		if ((parx >> 29) == 4) {
			bootcs_found = 1;
			break; /* BOOTCS found */
		}
	}

	/* 3. PARx[25] = 1b --> flashbase[29:16] = PARx[13:0]
	 *    PARx[25] = 0b --> flashbase[29:12] = PARx[17:0]
	 */
	if (bootcs_found) {
		if (parx & (1 << 25)) {
			parx &= (1 << 14) - 1; /* Mask [13:0] */
			flashbase = parx << 16;
		} else {
			parx &= (1 << 18) - 1; /* Mask [17:0] */
			flashbase = parx << 12;
		}
	} else {
		printf("AMD Elan SC520 detected, but no BOOTCS. Assuming flash at 4G\n");
	}

	/* 4. Clean up */
	munmap (mmcr, getpagesize());
	return 0;
}

typedef struct penable {
	uint16_t vendor, device;
	const char *name;
	int (*doit) (struct pci_dev *dev, const char *name);
} FLASH_ENABLE;

static const FLASH_ENABLE enables[] = {
	{0x1039, 0x0630, "SiS630",		enable_flash_sis630},
	{0x8086, 0x122e, "Intel PIIX",		enable_flash_piix4},
	{0x8086, 0x1234, "Intel MPIIX",		enable_flash_piix4},
	{0x8086, 0x7000, "Intel PIIX3",		enable_flash_piix4},
	{0x8086, 0x7110, "Intel PIIX4/4E/4M",	enable_flash_piix4},
	{0x8086, 0x7198, "Intel 440MX",		enable_flash_piix4},
	{0x8086, 0x2410, "Intel ICH",		enable_flash_ich_4e},
	{0x8086, 0x2420, "Intel ICH0",		enable_flash_ich_4e},
	{0x8086, 0x2440, "Intel ICH2",		enable_flash_ich_4e},
	{0x8086, 0x244c, "Intel ICH2-M",	enable_flash_ich_4e},
	{0x8086, 0x2480, "Intel ICH3-S",	enable_flash_ich_4e},
	{0x8086, 0x248c, "Intel ICH3-M",	enable_flash_ich_4e},
	{0x8086, 0x24c0, "Intel ICH4/ICH4-L",	enable_flash_ich_4e},
	{0x8086, 0x24cc, "Intel ICH4-M",	enable_flash_ich_4e},
	{0x8086, 0x24d0, "Intel ICH5/ICH5R",	enable_flash_ich_4e},
	{0x8086, 0x25a1, "Intel 6300ESB",	enable_flash_ich_4e},
	{0x8086, 0x2670, "Intel 631xESB/632xESB/3100",    enable_flash_ich_dc},
	{0x8086, 0x2640, "Intel ICH6/ICH6R",	enable_flash_ich_dc},
	{0x8086, 0x2641, "Intel ICH6-M",	enable_flash_ich_dc},
	{0x8086, 0x5031, "Intel EP80579",	enable_flash_ich7},
	{0x8086, 0x27b0, "Intel ICH7DH",	enable_flash_ich7},
	{0x8086, 0x27b8, "Intel ICH7/ICH7R",	enable_flash_ich7},
	{0x8086, 0x27b9, "Intel ICH7M",		enable_flash_ich7},
	{0x8086, 0x27bd, "Intel ICH7MDH",	enable_flash_ich7},
	{0x8086, 0x2810, "Intel ICH8/ICH8R",	enable_flash_ich8},
	{0x8086, 0x2811, "Intel ICH8M-E",	enable_flash_ich8},
	{0x8086, 0x2812, "Intel ICH8DH",	enable_flash_ich8},
	{0x8086, 0x2814, "Intel ICH8DO",	enable_flash_ich8},
	{0x8086, 0x2815, "Intel ICH8M",		enable_flash_ich8},
	{0x8086, 0x2912, "Intel ICH9DH",	enable_flash_ich9},
	{0x8086, 0x2914, "Intel ICH9DO",	enable_flash_ich9},
	{0x8086, 0x2916, "Intel ICH9R",		enable_flash_ich9},
	{0x8086, 0x2917, "Intel ICH9M-E",	enable_flash_ich9},
	{0x8086, 0x2918, "Intel ICH9",		enable_flash_ich9},
	{0x8086, 0x2919, "Intel ICH9M",		enable_flash_ich9},
	{0x8086, 0x3a14, "Intel ICH10DO",	enable_flash_ich10},
	{0x8086, 0x3a16, "Intel ICH10R",	enable_flash_ich10},
	{0x8086, 0x3a18, "Intel ICH10",		enable_flash_ich10},
	{0x8086, 0x3a1a, "Intel ICH10D",	enable_flash_ich10},
	{0x1106, 0x8231, "VIA VT8231",		enable_flash_vt823x},
	{0x1106, 0x3177, "VIA VT8235",		enable_flash_vt823x},
	{0x1106, 0x3227, "VIA VT8237",		enable_flash_vt823x},
	{0x1106, 0x3372, "VIA VT8237S",		enable_flash_vt8237s_spi},
	{0x1106, 0x8324, "VIA CX700",		enable_flash_vt823x},
	{0x1106, 0x0586, "VIA VT82C586A/B",	enable_flash_amd8111},
	{0x1106, 0x0686, "VIA VT82C686A/B",	enable_flash_amd8111},
	{0x1078, 0x0100, "AMD CS5530(A)",	enable_flash_cs5530},
	{0x100b, 0x0510, "AMD SC1100",		enable_flash_sc1100},
	{0x1039, 0x0008, "SiS5595",		enable_flash_sis5595},
	{0x1022, 0x2080, "AMD CS5536",		enable_flash_cs5536},
	{0x1022, 0x7468, "AMD8111",		enable_flash_amd8111},
	{0x1002, 0x438D, "ATI(AMD) SB600",	enable_flash_sb600},
	{0x1002, 0x439d, "ATI(AMD) SB700",	enable_flash_sb600},
	{0x10B9, 0x1533, "ALi M1533",		enable_flash_ali_m1533},
	{0x10de, 0x0050, "NVIDIA CK804",	enable_flash_ck804}, /* LPC */
	{0x10de, 0x0051, "NVIDIA CK804",	enable_flash_ck804}, /* Pro */
	/* Slave, should not be here, to fix known bug for A01. */
	{0x10de, 0x00d3, "NVIDIA CK804",	enable_flash_ck804},
	{0x10de, 0x0260, "NVIDIA MCP51",	enable_flash_ck804},
	{0x10de, 0x0261, "NVIDIA MCP51",	enable_flash_ck804},
	{0x10de, 0x0262, "NVIDIA MCP51",	enable_flash_ck804},
	{0x10de, 0x0263, "NVIDIA MCP51",	enable_flash_ck804},
	{0x10de, 0x0360, "NVIDIA MCP55",	enable_flash_mcp55}, /* M57SLI*/
	{0x10de, 0x0361, "NVIDIA MCP55",	enable_flash_mcp55}, /* LPC */
	{0x10de, 0x0362, "NVIDIA MCP55",	enable_flash_mcp55}, /* LPC */
	{0x10de, 0x0363, "NVIDIA MCP55",	enable_flash_mcp55}, /* LPC */
	{0x10de, 0x0364, "NVIDIA MCP55",	enable_flash_mcp55}, /* LPC */
	{0x10de, 0x0365, "NVIDIA MCP55",	enable_flash_mcp55}, /* LPC */
	{0x10de, 0x0366, "NVIDIA MCP55",	enable_flash_mcp55}, /* LPC */
	{0x10de, 0x0367, "NVIDIA MCP55",	enable_flash_mcp55}, /* Pro */
	{0x10de, 0x0548, "NVIDIA MCP67",	enable_flash_mcp55},
	{0x1002, 0x4377, "ATI SB400",		enable_flash_sb400},
	{0x1166, 0x0205, "Broadcom HT-1000",	enable_flash_ht1000},
	{0x1022, 0x3000, "AMD Elan SC520",	get_flashbase_sc520},
	{0x1022, 0x7440, "AMD AMD-768",         enable_flash_amd8111},
};

void print_supported_chipsets(void)
{
	int i;

	printf("\nSupported chipsets:\n\n");

	for (i = 0; i < ARRAY_SIZE(enables); i++)
		printf("%s (%04x:%04x)\n", enables[i].name,
		       enables[i].vendor, enables[i].device);
}

int chipset_flash_enable(void)
{
	struct pci_dev *dev = 0;
	int ret = -2;		/* Nothing! */
	int i;

	/* Now let's try to find the chipset we have... */
	for (i = 0; i < ARRAY_SIZE(enables); i++) {
		dev = pci_dev_find(enables[i].vendor, enables[i].device);
		if (dev)
			break;
	}

	if (dev) {
		printf("Found chipset \"%s\", enabling flash write... ",
		       enables[i].name);

		ret = enables[i].doit(dev, enables[i].name);
		if (ret)
			printf("FAILED!\n");
		else
			printf("OK.\n");
	}

	return ret;
}