Various coding style fixes, constification, fixed typos

Also, s/0xFF80/0xFFC0/ in the Acorp 6A815EPD board-enable, as per
http://www.linuxbios.org/pipermail/linuxbios/2007-December/027750.html

Corresponding to flashrom svn r162 and coreboot v2 svn r2997.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/chipset_enable.c b/chipset_enable.c
index 87929f5..7eecf09 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -34,12 +34,14 @@
 #include <unistd.h>
 #include "flash.h"
 
-static int enable_flash_ali_m1533(struct pci_dev *dev, char *name)
+static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name)
 {
 	uint8_t tmp;
 
-	/* ROM Write enable, 0xFFFC0000-0xFFFDFFFF and
-	   0xFFFE0000-0xFFFFFFFF ROM select enable. */
+	/*
+	 * ROM Write enable, 0xFFFC0000-0xFFFDFFFF and
+	 * 0xFFFE0000-0xFFFFFFFF ROM select enable.
+	 */
 	tmp = pci_read_byte(dev, 0x47);
 	tmp |= 0x46;
 	pci_write_byte(dev, 0x47, tmp);
@@ -47,24 +49,28 @@
 	return 0;
 }
 
-static int enable_flash_sis630(struct pci_dev *dev, char *name)
+static int enable_flash_sis630(struct pci_dev *dev, const char *name)
 {
-	char b;
+	uint8_t b;
 
-	/* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630 */
+	/* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630. */
 	b = pci_read_byte(dev, 0x40);
 	pci_write_byte(dev, 0x40, b | 0xb);
-	/* Flash write enable on SiS 540/630 */
+
+	/* Flash write enable on SiS 540/630. */
 	b = pci_read_byte(dev, 0x45);
 	pci_write_byte(dev, 0x45, b | 0x40);
 
-	/* The same thing on SiS 950 SuperIO side */
+	/* The same thing on SiS 950 Super I/O side... */
+
+	/* First probe for Super I/O on config port 0x2e. */
 	outb(0x87, 0x2e);
 	outb(0x01, 0x2e);
 	outb(0x55, 0x2e);
 	outb(0x55, 0x2e);
 
 	if (inb(0x2f) != 0x87) {
+		/* If that failed, try config port 0x4e. */
 		outb(0x87, 0x4e);
 		outb(0x01, 0x4e);
 		outb(0x55, 0x4e);
@@ -99,7 +105,7 @@
  *   - PDF: http://www.intel.com/design/intarch/datashts/29056201.pdf
  *   - Order Number: 290562-001
  */
-static int enable_flash_piix4(struct pci_dev *dev, char *name)
+static int enable_flash_piix4(struct pci_dev *dev, const char *name)
 {
 	uint16_t old, new;
 	uint16_t xbcs = 0x4e;	/* X-Bus Chip Select register. */
@@ -132,23 +138,19 @@
 	return 0;
 }
 
-static int enable_flash_ich(struct pci_dev *dev, char *name, int bios_cntl)
+/*
+ * See ie. page 375 of "Intel ICH7 External Design Specification"
+ * http://download.intel.com/design/chipsets/datashts/30701302.pdf
+ */
+static int enable_flash_ich(struct pci_dev *dev, const char *name,
+			    int bios_cntl)
 {
-	/* register 4e.b gets or'ed with one */
 	uint8_t old, new;
 
-	/* if it fails, it fails. There are so many variations of broken mobos
-	 * that it is hard to argue that we should quit at this point.
-	 */
-
-	/* Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
+	/*
+	 * Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but
 	 * just treating it as 8 bit wide seems to work fine in practice.
 	 */
-
-	/* see ie. page 375 of "Intel ICH7 External Design Specification"
-	 * http://download.intel.com/design/chipsets/datashts/30701302.pdf
-	 */
-
 	old = pci_read_byte(dev, bios_cntl);
 
 	new = old | 1;
@@ -166,17 +168,17 @@
 	return 0;
 }
 
-static int enable_flash_ich_4e(struct pci_dev *dev, char *name)
+static int enable_flash_ich_4e(struct pci_dev *dev, const char *name)
 {
 	return enable_flash_ich(dev, name, 0x4e);
 }
 
-static int enable_flash_ich_dc(struct pci_dev *dev, char *name)
+static int enable_flash_ich_dc(struct pci_dev *dev, const char *name)
 {
 	return enable_flash_ich(dev, name, 0xdc);
 }
 
-static int enable_flash_vt823x(struct pci_dev *dev, char *name)
+static int enable_flash_vt823x(struct pci_dev *dev, const char *name)
 {
 	uint8_t val;
 
@@ -194,7 +196,7 @@
 	return 0;
 }
 
-static int enable_flash_cs5530(struct pci_dev *dev, char *name)
+static int enable_flash_cs5530(struct pci_dev *dev, const char *name)
 {
 	uint8_t reg8;
 
@@ -224,7 +226,7 @@
 	return 0;
 }
 
-static int enable_flash_cs5536(struct pci_dev *dev, char *name)
+static int enable_flash_cs5536(struct pci_dev *dev, const char *name)
 {
 	int fd_msr;
 	unsigned char buf[8];
@@ -233,15 +235,15 @@
 	/* Geode systems write protect the BIOS via RCONFs (cache
 	 * settings similar to MTRRs). To unlock, change MSR 0x1808
 	 * top byte to 0x22. Reading and writing to msr, however
-	 * requires instrucitons rdmsr/wrmsr, which are ring0 privileged
+	 * requires instructions rdmsr/wrmsr, which are ring0 privileged
 	 * instructions so only the kernel can do the read/write.  This
 	 * function, therefore, requires that the msr kernel module be
 	 * loaded to access these instructions from user space using
 	 * device /dev/cpu/0/msr.  This hard-coded driver location
 	 * could have potential problems on SMP machines since it
-	 * assumes cpu0, but it is safe on the geode which is not SMP.
+	 * assumes cpu0, but it is safe on the Geode which is not SMP.
 	 *
-	 * This is probably not portable beyond linux.
+	 * This is probably not portable beyond Linux.
 	 */
 
 	fd_msr = open("/dev/cpu/0/msr", O_RDONLY);
@@ -272,7 +274,7 @@
 	return 0;
 }
 
-static int enable_flash_sc1100(struct pci_dev *dev, char *name)
+static int enable_flash_sc1100(struct pci_dev *dev, const char *name)
 {
 	uint8_t new;
 
@@ -288,16 +290,14 @@
 	return 0;
 }
 
-static int enable_flash_sis5595(struct pci_dev *dev, char *name)
+static int enable_flash_sis5595(struct pci_dev *dev, const char *name)
 {
 	uint8_t new, newer;
 
 	new = pci_read_byte(dev, 0x45);
 
-	/* clear bit 5 */
-	new &= (~0x20);
-	/* set bit 2 */
-	new |= 0x4;
+	new &= (~0x20);		/* Clear bit 5. */
+	new |= 0x4;		/* Set bit 2. */
 
 	pci_write_byte(dev, 0x45, new);
 
@@ -311,16 +311,11 @@
 	return 0;
 }
 
-static int enable_flash_amd8111(struct pci_dev *dev, char *name)
+static int enable_flash_amd8111(struct pci_dev *dev, const char *name)
 {
-	/* register 4e.b gets or'ed with one */
 	uint8_t old, new;
 
-	/* if it fails, it fails. There are so many variations of broken mobos
-	 * that it is hard to argue that we should quit at this point.
-	 */
-
-	/* enable decoding at 0xffb00000 to 0xffffffff */
+	/* Enable decoding at 0xffb00000 to 0xffffffff. */
 	old = pci_read_byte(dev, 0x43);
 	new = old | 0xC0;
 	if (new != old) {
@@ -344,17 +339,10 @@
 	return 0;
 }
 
-static int enable_flash_ck804(struct pci_dev *dev, char *name)
+static int enable_flash_ck804(struct pci_dev *dev, const char *name)
 {
-	/* register 4e.b gets or'ed with one */
 	uint8_t old, new;
 
-	/* if it fails, it fails. There are so many variations of broken mobos
-	 * that it is hard to argue that we should quit at this point.
-	 */
-
-	/* dump_pci_device(dev); */
-
 	old = pci_read_byte(dev, 0x88);
 	new = old | 0xc0;
 	if (new != old) {
@@ -378,14 +366,14 @@
 	return 0;
 }
 
-static int enable_flash_sb400(struct pci_dev *dev, char *name)
+/* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
+static int enable_flash_sb400(struct pci_dev *dev, const char *name)
 {
 	uint8_t tmp;
-
 	struct pci_filter f;
 	struct pci_dev *smbusdev;
 
-	/* then look for the smbus device */
+	/* Look for the SMBus device. */
 	pci_filter_init((struct pci_access *)0, &f);
 	f.vendor = 0x1002;
 	f.device = 0x4372;
@@ -397,21 +385,21 @@
 	}
 
 	if (!smbusdev) {
-		fprintf(stderr, "ERROR: SMBus device not found. aborting\n");
+		fprintf(stderr, "ERROR: SMBus device not found. Aborting.\n");
 		exit(1);
 	}
 
-	/* enable some smbus stuff */
+	/* Enable some SMBus stuff. */
 	tmp = pci_read_byte(smbusdev, 0x79);
 	tmp |= 0x01;
 	pci_write_byte(smbusdev, 0x79, tmp);
 
-	/* change southbridge */
+	/* Change southbridge. */
 	tmp = pci_read_byte(dev, 0x48);
 	tmp |= 0x21;
 	pci_write_byte(dev, 0x48, tmp);
 
-	/* now become a bit silly. */
+	/* Now become a bit silly. */
 	tmp = inb(0xc6f);
 	outb(tmp, 0xeb);
 	outb(tmp, 0xeb);
@@ -423,19 +411,12 @@
 	return 0;
 }
 
-static int enable_flash_mcp55(struct pci_dev *dev, char *name)
+static int enable_flash_mcp55(struct pci_dev *dev, const char *name)
 {
-	/* register 4e.b gets or'ed with one */
-	unsigned char old, new, byte;
-	unsigned short word;
+	uint8_t old, new, byte;
+	uint16_t word;
 
-	/* if it fails, it fails. There are so many variations of broken mobos
-	 * that it is hard to argue that we should quit at this point.
-	 */
-
-	/* dump_pci_device(dev); */
-
-	/* Set the 0-16 MB enable bits */
+	/* Set the 0-16 MB enable bits. */
 	byte = pci_read_byte(dev, 0x88);
 	byte |= 0xff;		/* 256K */
 	pci_write_byte(dev, 0x88, byte);
@@ -462,7 +443,7 @@
 	return 0;
 }
 
-static int enable_flash_ht1000(struct pci_dev *dev, char *name)
+static int enable_flash_ht1000(struct pci_dev *dev, const char *name)
 {
 	uint8_t byte;
 
@@ -479,12 +460,12 @@
 }
 
 typedef struct penable {
-	unsigned short vendor, device;
-	char *name;
-	int (*doit) (struct pci_dev * dev, char *name);
+	uint16_t vendor, device;
+	const char *name;
+	int (*doit) (struct pci_dev *dev, const char *name);
 } FLASH_ENABLE;
 
-static FLASH_ENABLE enables[] = {
+static const FLASH_ENABLE enables[] = {
 	{0x1039, 0x0630, "SIS630", enable_flash_sis630},
 	{0x8086, 0x7110, "PIIX4/PIIX4E/PIIX4M", enable_flash_piix4},
 	{0x8086, 0x7198, "Intel 440MX", enable_flash_piix4},
@@ -517,17 +498,14 @@
 	{0x1022, 0x2080, "AMD GEODE CS5536", enable_flash_cs5536},
 	{0x1022, 0x7468, "AMD8111", enable_flash_amd8111},
 	{0x10B9, 0x1533, "ALi M1533", enable_flash_ali_m1533},
-	/* this fallthrough looks broken. */
 	{0x10de, 0x0050, "NVIDIA CK804", enable_flash_ck804},	/* LPC */
 	{0x10de, 0x0051, "NVIDIA CK804", enable_flash_ck804},	/* Pro */
 	{0x10de, 0x00d3, "NVIDIA CK804", enable_flash_ck804},	/* Slave, should not be here, to fix known bug for A01. */
-
 	{0x10de, 0x0260, "NVidia MCP51", enable_flash_ck804},
 	{0x10de, 0x0261, "NVidia MCP51", enable_flash_ck804},
 	{0x10de, 0x0262, "NVidia MCP51", enable_flash_ck804},
 	{0x10de, 0x0263, "NVidia MCP51", enable_flash_ck804},
-
-	{0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55},	/* Gigabyte m57sli-s4 */
+	{0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55},	/* M57SLI-S4 */
 	{0x10de, 0x0361, "NVIDIA MCP55", enable_flash_mcp55},	/* LPC */
 	{0x10de, 0x0362, "NVIDIA MCP55", enable_flash_mcp55},	/* LPC */
 	{0x10de, 0x0363, "NVIDIA MCP55", enable_flash_mcp55},	/* LPC */
@@ -535,19 +513,18 @@
 	{0x10de, 0x0365, "NVIDIA MCP55", enable_flash_mcp55},	/* LPC */
 	{0x10de, 0x0366, "NVIDIA MCP55", enable_flash_mcp55},	/* LPC */
 	{0x10de, 0x0367, "NVIDIA MCP55", enable_flash_mcp55},	/* Pro */
-
-	{0x1002, 0x4377, "ATI SB400", enable_flash_sb400},	/* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
-
+	{0x1002, 0x4377, "ATI SB400", enable_flash_sb400},
 	{0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000},
 };
 
 int chipset_flash_enable(void)
 {
 	struct pci_dev *dev = 0;
-	int ret = -2;		/* nothing! */
+	int ret = -2;		/* Nothing! */
 	int i;
 
-	/* now let's try to find the chipset we have ... */
+	/* Now let's try to find the chipset we have... */
+	/* TODO: Use ARRAY_SIZE. */
 	for (i = 0; i < sizeof(enables) / sizeof(enables[0]); i++) {
 		dev = pci_dev_find(enables[i].vendor, enables[i].device);
 		if (dev)