m29f400bt.c

/*
 * This file is part of the flashrom project.
 *
 * Copyright (C) 2000 Silicon Integrated System Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#include "flash.h"
#include "chipdrivers.h"

/* WARNING! 
   This chip uses the standard JEDEC Addresses in 16-bit mode as word
   addresses. In byte mode, 0xAAA has to be used instead of 0x555 and
   0x555 instead of 0x2AA. Do *not* blindly replace with standard JEDEC
   functions. */

/* chunksize is 1 */
int write_m29f400bt(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len)
{
	int i;
	chipaddr bios = flash->virtual_memory;
	chipaddr dst = flash->virtual_memory + start;

	for (i = 0; i < len; i++) {
		chip_writeb(0xAA, bios + 0xAAA);
		chip_writeb(0x55, bios + 0x555);
		chip_writeb(0xA0, bios + 0xAAA);

		/* transfer data from source to destination */
		chip_writeb(*src, dst);
		toggle_ready_jedec(dst);
#if 0
		/* We only want to print something in the error case. */
		msg_cerr("Value in the flash at address 0x%lx = %#x, want %#x\n",
		     (dst - bios), chip_readb(dst), *src);
#endif
		dst++;
		src++;
	}

	/* FIXME: Ignore errors for now. */
	return 0;
}

int probe_m29f400bt(struct flashchip *flash)
{
	chipaddr bios = flash->virtual_memory;
	uint8_t id1, id2;

	chip_writeb(0xAA, bios + 0xAAA);
	chip_writeb(0x55, bios + 0x555);
	chip_writeb(0x90, bios + 0xAAA);

	programmer_delay(10);

	id1 = chip_readb(bios);
	/* The data sheet says id2 is at (bios + 0x01) and id2 listed in
	 * flash.h does not match. It should be possible to use JEDEC probe.
	 */
	id2 = chip_readb(bios + 0x02);

	chip_writeb(0xAA, bios + 0xAAA);
	chip_writeb(0x55, bios + 0x555);
	chip_writeb(0xF0, bios + 0xAAA);

	programmer_delay(10);

	msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);

	if (id1 == flash->manufacture_id && id2 == flash->model_id)
		return 1;

	return 0;
}

int erase_m29f400bt(struct flashchip *flash)
{
	chipaddr bios = flash->virtual_memory;

	chip_writeb(0xAA, bios + 0xAAA);
	chip_writeb(0x55, bios + 0x555);
	chip_writeb(0x80, bios + 0xAAA);

	chip_writeb(0xAA, bios + 0xAAA);
	chip_writeb(0x55, bios + 0x555);
	chip_writeb(0x10, bios + 0xAAA);

	programmer_delay(10);
	toggle_ready_jedec(bios);

	/* FIXME: Check the status register for errors. */
	return 0;
}

int block_erase_m29f400bt(struct flashchip *flash, unsigned int start, unsigned int len)
{
	chipaddr bios = flash->virtual_memory;
	chipaddr dst = bios + start;

	chip_writeb(0xAA, bios + 0xAAA);
	chip_writeb(0x55, bios + 0x555);
	chip_writeb(0x80, bios + 0xAAA);

	chip_writeb(0xAA, bios + 0xAAA);
	chip_writeb(0x55, bios + 0x555);
	chip_writeb(0x30, dst);

	programmer_delay(10);
	toggle_ready_jedec(bios);

	/* FIXME: Check the status register for errors. */
	return 0;
}

int block_erase_chip_m29f400bt(struct flashchip *flash, unsigned int address, unsigned int blocklen)
{
	if ((address != 0) || (blocklen != flash->total_size * 1024)) {
		msg_cerr("%s called with incorrect arguments\n",
			__func__);
		return -1;
	}
	return erase_m29f400bt(flash);
}