Add programmer-specific delay functions
Add external programmer delay functions so external programmers can
handle the delay on their own if needed.
Corresponding to flashrom svn r578.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Urja Rannikko <urjaman@gmail.com>
diff --git a/m29f400bt.c b/m29f400bt.c
index 7d63d58..85f9dc0 100644
--- a/m29f400bt.c
+++ b/m29f400bt.c
@@ -26,7 +26,7 @@
chip_writeb(0x55, bios + 0x555);
chip_writeb(0xA0, bios + 0xAAA);
- usleep(200);
+ programmer_delay(200);
}
void write_page_m29f400bt(chipaddr bios, uint8_t *src,
@@ -42,7 +42,7 @@
/* transfer data from source to destination */
chip_writeb(*src, dst);
//chip_writeb(0xF0, bios);
- //usleep(5);
+ //programmer_delay(5);
toggle_ready_jedec(dst);
printf
("Value in the flash at address 0x%lx = %#x, want %#x\n",
@@ -61,7 +61,7 @@
chip_writeb(0x55, bios + 0x555);
chip_writeb(0x90, bios + 0xAAA);
- myusec_delay(10);
+ programmer_delay(10);
id1 = chip_readb(bios);
/* The data sheet says id2 is at (bios + 0x01) and id2 listed in
@@ -73,7 +73,7 @@
chip_writeb(0x55, bios + 0x555);
chip_writeb(0xF0, bios + 0xAAA);
- myusec_delay(10);
+ programmer_delay(10);
printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, id1, id2);
@@ -95,7 +95,7 @@
chip_writeb(0x55, bios + 0x555);
chip_writeb(0x10, bios + 0xAAA);
- myusec_delay(10);
+ programmer_delay(10);
toggle_ready_jedec(bios);
return 0;
@@ -113,7 +113,7 @@
//chip_writeb(0x10, bios + 0xAAA);
chip_writeb(0x30, dst);
- myusec_delay(10);
+ programmer_delay(10);
toggle_ready_jedec(bios);
return 0;