blob: 6d7b030df05360c41c8e8cea6a7c4e6df563b884 [file] [log] [blame]
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +00001/*
2 * This file is part of the flashrom project.
3 *
4 * Copyright (C) 2010,2011 Carl-Daniel Hailfinger
5 * Written by Carl-Daniel Hailfinger for Angelbird Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; version 2 of the License.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000015 */
16
17/* Datasheets are not public (yet?) */
Andrew Morgana0743832011-07-25 22:07:05 +000018#if defined(__i386__) || defined(__x86_64__)
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000019
20#include <stdlib.h>
21#include "flash.h"
22#include "programmer.h"
Patrick Georgi32508eb2012-07-20 20:35:14 +000023#include "hwaccess.h"
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000024
Jacob Garberafc3ad62019-06-24 16:05:28 -060025static uint8_t *mv_bar;
26static uint16_t mv_iobar;
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000027
Thomas Heijligencc853d82021-05-04 15:32:17 +020028static const struct dev_entry satas_mv[] = {
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000029 /* 88SX6041 and 88SX6042 are the same according to the datasheet. */
30 {0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"},
31
Carl-Daniel Hailfinger1c6d2ff2012-08-27 00:44:42 +000032 {0},
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000033};
34
35#define NVRAM_PARAM 0x1045c
36#define FLASH_PARAM 0x1046c
37#define EXPANSION_ROM_BAR_CONTROL 0x00d2c
38#define PCI_BAR2_CONTROL 0x00c08
39#define GPIO_PORT_CONTROL 0x104f0
40
Carl-Daniel Hailfinger8a3c60c2011-12-18 15:01:24 +000041static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val,
42 chipaddr addr);
43static uint8_t satamv_chip_readb(const struct flashctx *flash,
44 const chipaddr addr);
Carl-Daniel Hailfingera5bcbce2014-07-19 22:03:29 +000045static const struct par_master par_master_satamv = {
Thomas Heijligen43040f22022-06-23 14:38:35 +020046 .chip_readb = satamv_chip_readb,
47 .chip_readw = fallback_chip_readw,
48 .chip_readl = fallback_chip_readl,
49 .chip_readn = fallback_chip_readn,
50 .chip_writeb = satamv_chip_writeb,
51 .chip_writew = fallback_chip_writew,
52 .chip_writel = fallback_chip_writel,
53 .chip_writen = fallback_chip_writen,
Carl-Daniel Hailfingereaacd2d2011-11-09 23:40:00 +000054};
55
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000056/*
57 * Random notes:
58 * FCE# Flash Chip Enable
59 * FWE# Flash Write Enable
60 * FOE# Flash Output Enable
61 * FALE[1:0] Flash Address Latch Enable
62 * FAD[7:0] Flash Multiplexed Address/Data Bus
63 * FA[2:0] Flash Address Low
64 *
65 * GPIO[15,2] GPIO Port Mode
66 * GPIO[4:3] Flash Size
67 *
68 * 0xd2c Expansion ROM BAR Control
69 * 0xc08 PCI BAR2 (Flash/NVRAM) Control
70 * 0x1046c Flash Parameters
71 */
Thomas Heijligencc853d82021-05-04 15:32:17 +020072static int satamv_init(void)
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000073{
Carl-Daniel Hailfingera2faddf2013-01-05 23:52:45 +000074 struct pci_dev *dev = NULL;
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000075 uintptr_t addr;
76 uint32_t tmp;
77
Carl-Daniel Hailfingerd6bb8282012-07-21 17:27:08 +000078 if (rget_io_perms())
79 return 1;
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000080
81 /* BAR0 has all internal registers memory mapped. */
Carl-Daniel Hailfingera2faddf2013-01-05 23:52:45 +000082 dev = pcidev_init(satas_mv, PCI_BASE_ADDRESS_0);
83 if (!dev)
84 return 1;
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000085
Carl-Daniel Hailfingera2faddf2013-01-05 23:52:45 +000086 addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0);
Niklas Söderlund89edf362013-08-23 23:29:23 +000087 if (!addr)
88 return 1;
89
Stefan Tauner7fb5aa02013-08-14 15:48:44 +000090 mv_bar = rphysmap("Marvell 88SX7042 registers", addr, 0x20000);
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000091 if (mv_bar == ERROR_PTR)
Stefan Tauner55619552013-01-04 22:24:58 +000092 return 1;
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +000093
94 tmp = pci_mmio_readl(mv_bar + FLASH_PARAM);
95 msg_pspew("Flash Parameters:\n");
96 msg_pspew("TurnOff=0x%01x\n", (tmp >> 0) & 0x7);
97 msg_pspew("Acc2First=0x%01x\n", (tmp >> 3) & 0xf);
98 msg_pspew("Acc2Next=0x%01x\n", (tmp >> 7) & 0xf);
99 msg_pspew("ALE2Wr=0x%01x\n", (tmp >> 11) & 0x7);
100 msg_pspew("WrLow=0x%01x\n", (tmp >> 14) & 0x7);
101 msg_pspew("WrHigh=0x%01x\n", (tmp >> 17) & 0x7);
102 msg_pspew("Reserved[21:20]=0x%01x\n", (tmp >> 20) & 0x3);
103 msg_pspew("TurnOffExt=0x%01x\n", (tmp >> 22) & 0x1);
104 msg_pspew("Acc2FirstExt=0x%01x\n", (tmp >> 23) & 0x1);
105 msg_pspew("Acc2NextExt=0x%01x\n", (tmp >> 24) & 0x1);
106 msg_pspew("ALE2WrExt=0x%01x\n", (tmp >> 25) & 0x1);
107 msg_pspew("WrLowExt=0x%01x\n", (tmp >> 26) & 0x1);
108 msg_pspew("WrHighExt=0x%01x\n", (tmp >> 27) & 0x1);
109 msg_pspew("Reserved[31:28]=0x%01x\n", (tmp >> 28) & 0xf);
110
111 tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_BAR_CONTROL);
112 msg_pspew("Expansion ROM BAR Control:\n");
113 msg_pspew("ExpROMSz=0x%01x\n", (tmp >> 19) & 0x7);
114
115 /* Enable BAR2 mapping to flash */
116 tmp = pci_mmio_readl(mv_bar + PCI_BAR2_CONTROL);
117 msg_pspew("PCI BAR2 (Flash/NVRAM) Control:\n");
118 msg_pspew("Bar2En=0x%01x\n", (tmp >> 0) & 0x1);
119 msg_pspew("BAR2TransAttr=0x%01x\n", (tmp >> 1) & 0x1f);
120 msg_pspew("BAR2Sz=0x%01x\n", (tmp >> 19) & 0x7);
121 tmp &= 0xffffffc0;
122 tmp |= 0x0000001f;
Carl-Daniel Hailfinger54ce73a2011-05-03 21:49:41 +0000123 pci_rmmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL);
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000124
125 /* Enable flash: GPIO Port Control Register 0x104f0 */
126 tmp = pci_mmio_readl(mv_bar + GPIO_PORT_CONTROL);
127 msg_pspew("GPIOPortMode=0x%01x\n", (tmp >> 0) & 0x3);
128 if (((tmp >> 0) & 0x3) != 0x2)
129 msg_pinfo("Warning! Either the straps are incorrect or you "
130 "have no flash or someone overwrote the strap "
131 "values!\n");
132 tmp &= 0xfffffffc;
133 tmp |= 0x2;
Carl-Daniel Hailfinger54ce73a2011-05-03 21:49:41 +0000134 pci_rmmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL);
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000135
136 /* Get I/O BAR location. */
Stefan Reinauer789ea5e2014-04-26 16:12:15 +0000137 addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_2);
Niklas Söderlund89edf362013-08-23 23:29:23 +0000138 if (!addr)
139 return 1;
140
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000141 /* Truncate to reachable range.
142 * FIXME: Check if the I/O BAR is actually reachable.
143 * This is an arch specific check.
144 */
Stefan Reinauer789ea5e2014-04-26 16:12:15 +0000145 mv_iobar = addr & 0xffff;
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000146 msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar);
147
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000148 /* 512 kByte with two 8-bit latches, and
149 * 4 MByte with additional 3-bit latch. */
150 max_rom_decode.parallel = 4 * 1024 * 1024;
Anastasia Klimchukc1f2a472021-08-27 15:47:46 +1000151 return register_par_master(&par_master_satamv, BUS_PARALLEL, NULL);
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000152}
153
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000154/* BAR2 (MEM) can map NVRAM and flash. We set it to flash in the init function.
155 * If BAR2 is disabled, it still can be accessed indirectly via BAR1 (I/O).
156 * This code only supports indirect accesses for now.
157 */
158
159/* Indirect access to via the I/O BAR1. */
160static void satamv_indirect_chip_writeb(uint8_t val, chipaddr addr)
161{
162 /* 0x80000000 selects BAR2 for remapping. */
163 OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar);
164 OUTB(val, mv_iobar + 0x80 + (addr & 0x3));
165}
166
167/* Indirect access to via the I/O BAR1. */
168static uint8_t satamv_indirect_chip_readb(const chipaddr addr)
169{
170 /* 0x80000000 selects BAR2 for remapping. */
171 OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar);
172 return INB(mv_iobar + 0x80 + (addr & 0x3));
173}
174
175/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */
Carl-Daniel Hailfinger8a3c60c2011-12-18 15:01:24 +0000176static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val,
177 chipaddr addr)
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000178{
179 satamv_indirect_chip_writeb(val, addr);
180}
181
182/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */
Carl-Daniel Hailfinger8a3c60c2011-12-18 15:01:24 +0000183static uint8_t satamv_chip_readb(const struct flashctx *flash,
184 const chipaddr addr)
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000185{
186 return satamv_indirect_chip_readb(addr);
187}
Andrew Morgana0743832011-07-25 22:07:05 +0000188
Thomas Heijligencc853d82021-05-04 15:32:17 +0200189const struct programmer_entry programmer_satamv = {
190 .name = "satamv",
191 .type = PCI,
192 .devs.dev = satas_mv,
193 .init = satamv_init,
194 .map_flash_region = fallback_map,
195 .unmap_flash_region = fallback_unmap,
196 .delay = internal_delay,
197};
198
Andrew Morgana0743832011-07-25 22:07:05 +0000199#else
200#error PCI port I/O access is not supported on this architecture yet.
201#endif