Register Parallel/LPC/FWH programmers the same way SPI programmers are registered
All programmers are now calling programmer registration functions and
direct manipulations of buses_supported are not needed/possible anymore.
Note: Programmers without parallel/LPC/FWH chip support should not call
register_par_programmer().
Additional fixes:
Set max_rom_decode.parallel for drkaiser.
Remove abuse of programmer_map_flash_region in it85spi.
Annotate several FIXMEs in it85spi.
Corresponding to flashrom svn r1463.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
diff --git a/satamv.c b/satamv.c
index 5c15fc8..b5d964e 100644
--- a/satamv.c
+++ b/satamv.c
@@ -41,6 +41,17 @@
#define PCI_BAR2_CONTROL 0x00c08
#define GPIO_PORT_CONTROL 0x104f0
+static const struct par_programmer par_programmer_satamv = {
+ .chip_readb = satamv_chip_readb,
+ .chip_readw = fallback_chip_readw,
+ .chip_readl = fallback_chip_readl,
+ .chip_readn = fallback_chip_readn,
+ .chip_writeb = satamv_chip_writeb,
+ .chip_writew = fallback_chip_writew,
+ .chip_writel = fallback_chip_writel,
+ .chip_writen = fallback_chip_writen,
+};
+
static int satamv_shutdown(void *data)
{
physunmap(mv_bar, 0x20000);
@@ -137,11 +148,10 @@
mv_iobar = tmp & 0xffff;
msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar);
- buses_supported = BUS_PARALLEL;
-
/* 512 kByte with two 8-bit latches, and
* 4 MByte with additional 3-bit latch. */
max_rom_decode.parallel = 4 * 1024 * 1024;
+ register_par_programmer(&par_programmer_satamv, BUS_PARALLEL);
return 0;