blob: bd2cc1054c9d23cdd43713193f39ca03bffdb9de [file] [log] [blame]
Ollie Lho184a4042005-11-26 21:55:36 +00001#
Uwe Hermannf78cff12009-06-12 14:05:25 +00002# This file is part of the flashrom project.
3#
4# Copyright (C) 2005 coresystems GmbH <stepan@coresystems.de>
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +00005# Copyright (C) 2009,2010,2012 Carl-Daniel Hailfinger
Uwe Hermannf78cff12009-06-12 14:05:25 +00006#
7# This program is free software; you can redistribute it and/or modify
8# it under the terms of the GNU General Public License as published by
9# the Free Software Foundation; version 2 of the License.
10#
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY; without even the implied warranty of
13# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14# GNU General Public License for more details.
15#
16# You should have received a copy of the GNU General Public License
17# along with this program; if not, write to the Free Software
18# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Ollie Lho184a4042005-11-26 21:55:36 +000019#
Ronald G. Minnich5e5f75e2002-01-29 18:21:41 +000020
Ollie Lho184a4042005-11-26 21:55:36 +000021PROGRAM = flashrom
Ronald G. Minnicheaab50b2003-09-12 22:41:53 +000022
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000023###############################################################################
24# Defaults for the toolchain.
25
26# If you want to cross-compile, just run e.g.
27# make CC=i586-pc-msdosdjgpp-gcc
28# You may have to specify STRIP/AR/RANLIB as well.
Carl-Daniel Hailfingerb7bce8a2012-08-14 21:36:11 +000029#
30# Note for anyone editing this Makefile: gnumake will happily ignore any
31# changes in this Makefile to variables set on the command line.
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +000032STRIP ?= strip
Christian Ruppertdb9d9f42009-05-14 14:17:07 +000033INSTALL = install
Paul Fox05dfbe62009-06-16 21:08:06 +000034DIFF = diff
Christian Ruppertdb9d9f42009-05-14 14:17:07 +000035PREFIX ?= /usr/local
Uwe Hermann56b2cb02009-05-21 15:59:58 +000036MANDIR ?= $(PREFIX)/share/man
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +000037CFLAGS ?= -Os -Wall -Wshadow
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +000038EXPORTDIR ?= .
Patrick Georgi97bc95c2011-03-08 07:17:44 +000039RANLIB ?= ranlib
Stefan Tauner3f73ffe2016-01-07 17:45:59 +000040PKG_CONFIG ?= pkg-config
41BUILD_DETAILS_FILE ?= build_details.txt
Stefan Taunerbe62d3f2015-01-10 09:32:44 +000042
Stefan Taunerfd0d4132012-09-25 21:24:55 +000043# The following parameter changes the default programmer that will be used if there is no -p/--programmer
44# argument given when running flashrom. The predefined setting does not enable any default so that every
45# user has to declare the programmer he wants to use on every run. The rationale for this to be not set
46# (to e.g. the internal programmer) is that forgetting to specify this when working with another programmer
47# easily puts the system attached to the default programmer at risk (e.g. you want to flash coreboot to another
48# system attached to an external programmer while the default programmer is set to the internal programmer, and
49# you forget to use the -p parameter. This would (try to) overwrite the existing firmware of the computer
50# running flashrom). Please do not enable this without thinking about the possible consequences. Possible
51# values are those specified in enum programmer in programmer.h (which depend on other CONFIG_* options
52# evaluated below, namely those that enable/disable the various programmers).
53# Compilation will fail for unspecified values.
54CONFIG_DEFAULT_PROGRAMMER ?= PROGRAMMER_INVALID
Stefan Tauner265fcac2014-06-02 00:12:23 +000055# The following adds a default parameter for the default programmer set above (only).
56CONFIG_DEFAULT_PROGRAMMER_ARGS ?= ''
57# Example: compiling with
58# make CONFIG_DEFAULT_PROGRAMMER=PROGRAMMER_SERPROG CONFIG_DEFAULT_PROGRAMMER_ARGS="dev=/dev/ttyUSB0:1500000"
59# would make executing './flashrom' (almost) equivialent to './flashrom -p serprog:dev=/dev/ttyUSB0:1500000'.
Christian Ruppertdb9d9f42009-05-14 14:17:07 +000060
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000061# If your compiler spits out excessive warnings, run make WARNERROR=no
62# You shouldn't have to change this flag.
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +000063WARNERROR ?= yes
64
65ifeq ($(WARNERROR), yes)
66CFLAGS += -Werror
67endif
68
Stefan Taunere37735a2015-01-26 22:03:35 +000069ifdef LIBS_BASE
Stefan Taunere37735a2015-01-26 22:03:35 +000070PKG_CONFIG_LIBDIR ?= $(LIBS_BASE)/lib/pkgconfig
Stefan Tauner45207062016-02-19 08:17:24 +000071override CPPFLAGS += -I$(LIBS_BASE)/include
72override LDFLAGS += -L$(LIBS_BASE)/lib -Wl,-rpath -Wl,$(LIBS_BASE)/lib
Stefan Taunere37735a2015-01-26 22:03:35 +000073endif
Stefan Taunerbe62d3f2015-01-10 09:32:44 +000074
Stefan Taunerbfb067b2016-01-07 18:13:07 +000075ifeq ($(CONFIG_STATIC),yes)
Stefan Tauner45207062016-02-19 08:17:24 +000076override PKG_CONFIG += --static
77override LDFLAGS += -static
Stefan Taunerbfb067b2016-01-07 18:13:07 +000078endif
79
Stefan Tauner1ca7c7f2016-01-14 23:05:55 +000080# Set LC_ALL=C to minimize influences of the locale.
81# However, this won't work for the majority of relevant commands because they use the $(shell) function and
82# GNU make does not relay variables exported within the makefile to their evironment.
83LC_ALL=C
84export LC_ALL
85
Stefan Tauner3f73ffe2016-01-07 17:45:59 +000086dummy_for_make_3_80:=$(shell printf "Build started on %s\n\n" "$$(date)" >$(BUILD_DETAILS_FILE))
Stefan Tauner1ca7c7f2016-01-14 23:05:55 +000087
88# Provide an easy way to execute a command, print its output to stdout and capture any error message on stderr
89# in the build details file together with the original stdout output.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +000090debug_shell = $(shell export LC_ALL=C ; { echo 'exec: export LC_ALL=C ; { $(1) ; }' >&2; { $(1) ; } | tee -a $(BUILD_DETAILS_FILE) ; echo >&2 ; } 2>>$(BUILD_DETAILS_FILE))
Stefan Tauner1ca7c7f2016-01-14 23:05:55 +000091
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000092###############################################################################
Stefan Tauner037cd842013-08-25 00:10:56 +000093# General OS-specific settings.
94# 1. Prepare for later by gathering information about host and target OS
95# 2. Set compiler flags and parameters according to OSes
96# 3. Likewise verify user-supplied CONFIG_* variables.
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000097
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +000098# HOST_OS is only used to work around local toolchain issues.
Stefan Tauner037cd842013-08-25 00:10:56 +000099HOST_OS ?= $(shell uname)
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000100ifeq ($(HOST_OS), MINGW32_NT-5.1)
101# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found".
102CC = gcc
103endif
104ifneq ($(HOST_OS), SunOS)
Adam Kaufman064b1f22007-02-06 19:47:50 +0000105STRIP_ARGS = -s
106endif
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000107
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000108# Determine the destination OS.
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000109# IMPORTANT: The following line must be placed before TARGET_OS is ever used
110# (of course), but should come after any lines setting CC because the line
111# below uses CC itself.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000112override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"'))
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000113
114ifeq ($(TARGET_OS), Darwin)
Stefan Tauner45207062016-02-19 08:17:24 +0000115override CPPFLAGS += -I/opt/local/include -I/usr/local/include
116override LDFLAGS += -L/opt/local/lib -L/usr/local/lib
Stefan Reinauerf79edb92009-01-26 01:23:31 +0000117endif
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000118
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000119ifeq ($(TARGET_OS), FreeBSD)
Stefan Tauner45207062016-02-19 08:17:24 +0000120override CPPFLAGS += -I/usr/local/include
121override LDFLAGS += -L/usr/local/lib
Andriy Gapon65c1b862008-05-22 13:22:45 +0000122endif
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000123
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000124ifeq ($(TARGET_OS), OpenBSD)
Stefan Tauner45207062016-02-19 08:17:24 +0000125override CPPFLAGS += -I/usr/local/include
126override LDFLAGS += -L/usr/local/lib
Carl-Daniel Hailfingerb63b0672010-07-02 17:12:50 +0000127endif
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000128
Stefan Taunerc65b8552013-09-12 15:48:39 +0000129ifeq ($(TARGET_OS), NetBSD)
Stefan Tauner45207062016-02-19 08:17:24 +0000130override CPPFLAGS += -I/usr/pkg/include
131override LDFLAGS += -L/usr/pkg/lib
Stefan Taunerc65b8552013-09-12 15:48:39 +0000132endif
133
134ifeq ($(TARGET_OS), DragonFlyBSD)
Stefan Tauner45207062016-02-19 08:17:24 +0000135override CPPFLAGS += -I/usr/local/include
136override LDFLAGS += -L/usr/local/lib
Stefan Taunerc65b8552013-09-12 15:48:39 +0000137endif
138
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000139ifeq ($(TARGET_OS), DOS)
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +0000140EXEC_SUFFIX := .exe
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000141# DJGPP has odd uint*_t definitions which cause lots of format string warnings.
Stefan Tauner45207062016-02-19 08:17:24 +0000142override CFLAGS += -Wno-format
Stefan Tauner449abe22013-09-11 23:34:57 +0000143LIBS += -lgetopt
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000144# Bus Pirate, Serprog and PonyProg are not supported under DOS (missing serial support).
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000145ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
146UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes
147else
148override CONFIG_BUSPIRATE_SPI = no
149endif
150ifeq ($(CONFIG_SERPROG), yes)
151UNSUPPORTED_FEATURES += CONFIG_SERPROG=yes
152else
153override CONFIG_SERPROG = no
154endif
Stefan Taunerd94d25d2012-07-28 03:17:15 +0000155ifeq ($(CONFIG_PONY_SPI), yes)
156UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes
157else
158override CONFIG_PONY_SPI = no
159endif
Urja Rannikko0870b022016-01-31 22:10:29 +0000160# Dediprog, USB-Blaster, PICkit2, CH341A and FT2232 are not supported under DOS (missing USB support).
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000161ifeq ($(CONFIG_DEDIPROG), yes)
162UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
163else
164override CONFIG_DEDIPROG = no
165endif
166ifeq ($(CONFIG_FT2232_SPI), yes)
167UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
168else
169override CONFIG_FT2232_SPI = no
170endif
James Lairdc60de0e2013-03-27 13:00:23 +0000171ifeq ($(CONFIG_USBBLASTER_SPI), yes)
172UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
173else
174override CONFIG_USBBLASTER_SPI = no
175endif
Justin Chevrier66e554b2015-02-08 21:58:10 +0000176ifeq ($(CONFIG_PICKIT2_SPI), yes)
177UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes
178else
179override CONFIG_PICKIT2_SPI = no
180endif
Urja Rannikko0870b022016-01-31 22:10:29 +0000181ifeq ($(CONFIG_CH341A_SPI), yes)
182UNSUPPORTED_FEATURES += CONFIG_CH341A_SPI=yes
183else
184override CONFIG_CH341A_SPI = no
185endif
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000186endif
Ollie Lho184a4042005-11-26 21:55:36 +0000187
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000188# FIXME: Should we check for Cygwin/MSVC as well?
189ifeq ($(TARGET_OS), MinGW)
190EXEC_SUFFIX := .exe
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000191# MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs().
Carl-Daniel Hailfingera8da2242012-08-15 23:06:32 +0000192FLASHROM_CFLAGS += -Dffs=__builtin_ffs
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000193# Some functions provided by Microsoft do not work as described in C99 specifications. This macro fixes that
Stefan Tauner23e10b82016-01-23 16:16:49 +0000194# for MinGW. See http://sourceforge.net/p/mingw-w64/wiki2/printf%20and%20scanf%20family/ */
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000195FLASHROM_CFLAGS += -D__USE_MINGW_ANSI_STDIO=1
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000196# For now we disable all PCI-based programmers on Windows/MinGW (no libpci).
197ifeq ($(CONFIG_INTERNAL), yes)
198UNSUPPORTED_FEATURES += CONFIG_INTERNAL=yes
199else
200override CONFIG_INTERNAL = no
201endif
202ifeq ($(CONFIG_RAYER_SPI), yes)
203UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
204else
205override CONFIG_RAYER_SPI = no
206endif
207ifeq ($(CONFIG_NIC3COM), yes)
208UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
209else
210override CONFIG_NIC3COM = no
211endif
212ifeq ($(CONFIG_GFXNVIDIA), yes)
213UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes
214else
215override CONFIG_GFXNVIDIA = no
216endif
217ifeq ($(CONFIG_SATASII), yes)
218UNSUPPORTED_FEATURES += CONFIG_SATASII=yes
219else
220override CONFIG_SATASII = no
221endif
222ifeq ($(CONFIG_ATAHPT), yes)
223UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
224else
225override CONFIG_ATAHPT = no
226endif
Jonathan Kollasch7f0f3fa2014-06-01 10:26:23 +0000227ifeq ($(CONFIG_ATAVIA), yes)
228UNSUPPORTED_FEATURES += CONFIG_ATAVIA=yes
229else
230override CONFIG_ATAVIA = no
231endif
Joseph C. Lehnerc2644a32016-01-16 23:45:25 +0000232ifeq ($(CONFIG_ATAPROMISE), yes)
233UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
234else
235override CONFIG_ATAPROMISE = no
236endif
Kyösti Mälkki72d42f82014-06-01 23:48:31 +0000237ifeq ($(CONFIG_IT8212), yes)
238UNSUPPORTED_FEATURES += CONFIG_IT8212=yes
239else
240override CONFIG_IT8212 = no
241endif
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000242ifeq ($(CONFIG_DRKAISER), yes)
243UNSUPPORTED_FEATURES += CONFIG_DRKAISER=yes
244else
245override CONFIG_DRKAISER = no
246endif
247ifeq ($(CONFIG_NICREALTEK), yes)
248UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
249else
250override CONFIG_NICREALTEK = no
251endif
252ifeq ($(CONFIG_NICNATSEMI), yes)
253UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
254else
255override CONFIG_NICNATSEMI = no
256endif
257ifeq ($(CONFIG_NICINTEL), yes)
258UNSUPPORTED_FEATURES += CONFIG_NICINTEL=yes
259else
260override CONFIG_NICINTEL = no
261endif
Ricardo Ribalda Delgado2a41f0a2014-07-28 20:35:21 +0000262ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
263UNSUPPORTED_FEATURES += CONFIG_NICINTEL_EEPROM=yes
264else
265override CONFIG_NICINTEL_EEPROM = no
266endif
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000267ifeq ($(CONFIG_NICINTEL_SPI), yes)
268UNSUPPORTED_FEATURES += CONFIG_NICINTEL_SPI=yes
269else
270override CONFIG_NICINTEL_SPI = no
271endif
272ifeq ($(CONFIG_OGP_SPI), yes)
273UNSUPPORTED_FEATURES += CONFIG_OGP_SPI=yes
274else
275override CONFIG_OGP_SPI = no
276endif
277ifeq ($(CONFIG_SATAMV), yes)
278UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
279else
280override CONFIG_SATAMV = no
281endif
282endif
283
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000284ifeq ($(TARGET_OS), libpayload)
Stefan Tauner8e19b042013-08-28 09:55:04 +0000285ifeq ($(MAKECMDGOALS),)
286.DEFAULT_GOAL := libflashrom.a
287$(info Setting default goal to libflashrom.a)
288endif
Carl-Daniel Hailfingera8da2242012-08-15 23:06:32 +0000289FLASHROM_CFLAGS += -DSTANDALONE
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000290ifeq ($(CONFIG_DUMMY), yes)
291UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes
292else
293override CONFIG_DUMMY = no
294endif
Stefan Taunere0168262016-02-21 11:18:24 +0000295# libpayload does not provide the romsize field in struct pci_dev that the atapromise code requires.
296ifeq ($(CONFIG_ATAPROMISE), yes)
297UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
298else
299override CONFIG_ATAPROMISE = no
300endif
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000301# Bus Pirate, Serprog and PonyProg are not supported with libpayload (missing serial support).
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000302ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
303UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes
304else
305override CONFIG_BUSPIRATE_SPI = no
306endif
307ifeq ($(CONFIG_SERPROG), yes)
308UNSUPPORTED_FEATURES += CONFIG_SERPROG=yes
309else
310override CONFIG_SERPROG = no
311endif
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000312ifeq ($(CONFIG_PONY_SPI), yes)
313UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes
314else
315override CONFIG_PONY_SPI = no
316endif
Stefan Tauner0be072c2016-03-13 15:16:30 +0000317# Dediprog, USB-Blaster, PICkit2, CH341A and FT2232 are not supported with libpayload (missing libusb support).
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000318ifeq ($(CONFIG_DEDIPROG), yes)
319UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
320else
321override CONFIG_DEDIPROG = no
322endif
323ifeq ($(CONFIG_FT2232_SPI), yes)
324UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
325else
326override CONFIG_FT2232_SPI = no
327endif
James Lairdc60de0e2013-03-27 13:00:23 +0000328ifeq ($(CONFIG_USBBLASTER_SPI), yes)
329UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
330else
331override CONFIG_USBBLASTER_SPI = no
332endif
Justin Chevrier66e554b2015-02-08 21:58:10 +0000333ifeq ($(CONFIG_PICKIT2_SPI), yes)
334UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes
335else
336override CONFIG_PICKIT2_SPI = no
337endif
Urja Rannikko0870b022016-01-31 22:10:29 +0000338ifeq ($(CONFIG_CH341A_SPI), yes)
339UNSUPPORTED_FEATURES += CONFIG_CH341A_SPI=yes
340else
341override CONFIG_CH341A_SPI = no
342endif
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000343endif
344
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000345ifneq ($(TARGET_OS), Linux)
Carl-Daniel Hailfinger601f4cd2016-02-28 22:04:51 +0000346# Android is handled internally as separate OS, but it supports CONFIG_LINUX_SPI and CONFIG_MSTARDDC_SPI
347ifneq ($(TARGET_OS), Android)
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000348ifeq ($(CONFIG_LINUX_SPI), yes)
349UNSUPPORTED_FEATURES += CONFIG_LINUX_SPI=yes
350else
351override CONFIG_LINUX_SPI = no
352endif
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000353ifeq ($(CONFIG_MSTARDDC_SPI), yes)
354UNSUPPORTED_FEATURES += CONFIG_MSTARDDC_SPI=yes
355else
356override CONFIG_MSTARDDC_SPI = no
357endif
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000358endif
Carl-Daniel Hailfinger601f4cd2016-02-28 22:04:51 +0000359endif
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000360
Carl-Daniel Hailfinger16c0aec2016-02-20 21:43:56 +0000361ifeq ($(TARGET_OS), Android)
362# Android on x86 (currently) does not provide raw PCI port I/O operations
363ifeq ($(CONFIG_RAYER_SPI), yes)
364UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
365else
366override CONFIG_RAYER_SPI = no
367endif
368endif
369
Stefan Tauner037cd842013-08-25 00:10:56 +0000370###############################################################################
371# General architecture-specific settings.
372# Like above for the OS, below we verify user-supplied options depending on the target architecture.
373
Uwe Hermann44ffd582011-08-20 14:16:00 +0000374# Determine the destination processor architecture.
375# IMPORTANT: The following line must be placed before ARCH is ever used
376# (of course), but should come after any lines setting CC because the line
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000377# below uses CC itself.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000378override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"'))
Nico Huber095522c2017-12-01 18:33:02 +0000379override ENDIAN := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E endiantest.c 2>/dev/null | grep -v '^\#'))
Uwe Hermann44ffd582011-08-20 14:16:00 +0000380
Stefan Taunerfb2d77c2015-02-10 08:03:10 +0000381# PCI port I/O support is unimplemented on PPC/MIPS/SPARC and unavailable on ARM.
David Hendricksb286da72012-02-13 00:35:35 +0000382# Right now this means the drivers below only work on x86.
383ifneq ($(ARCH), x86)
Uwe Hermann21b10c62011-07-29 12:13:01 +0000384ifeq ($(CONFIG_NIC3COM), yes)
385UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
386else
387override CONFIG_NIC3COM = no
388endif
389ifeq ($(CONFIG_NICREALTEK), yes)
390UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
391else
392override CONFIG_NICREALTEK = no
393endif
394ifeq ($(CONFIG_NICNATSEMI), yes)
395UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
396else
397override CONFIG_NICNATSEMI = no
398endif
399ifeq ($(CONFIG_RAYER_SPI), yes)
400UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
401else
402override CONFIG_RAYER_SPI = no
403endif
404ifeq ($(CONFIG_ATAHPT), yes)
405UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
406else
407override CONFIG_ATAHPT = no
408endif
Carl-Daniel Hailfingerf636ffc2016-02-20 22:04:39 +0000409ifeq ($(CONFIG_ATAPROMISE), yes)
410UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
411else
412override CONFIG_ATAPROMISE = no
413endif
Uwe Hermann21b10c62011-07-29 12:13:01 +0000414ifeq ($(CONFIG_SATAMV), yes)
415UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
416else
417override CONFIG_SATAMV = no
418endif
419endif
420
Carl-Daniel Hailfinger8d0d53f2016-02-25 20:10:26 +0000421# Disable all drivers needing raw access (memory, PCI, port I/O) on
422# architectures with unknown raw access properties.
423# Right now those architectures are alpha hppa m68k sh s390
424ifneq ($(ARCH),$(filter $(ARCH),x86 mips ppc arm sparc))
425ifeq ($(CONFIG_INTERNAL), yes)
426UNSUPPORTED_FEATURES += CONFIG_INTERNAL=yes
427else
428override CONFIG_INTERNAL = no
429endif
430ifeq ($(CONFIG_RAYER_SPI), yes)
431UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
432else
433override CONFIG_RAYER_SPI = no
434endif
Carl-Daniel Hailfinger8d0d53f2016-02-25 20:10:26 +0000435ifeq ($(CONFIG_NIC3COM), yes)
436UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
437else
438override CONFIG_NIC3COM = no
439endif
440ifeq ($(CONFIG_GFXNVIDIA), yes)
441UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes
442else
443override CONFIG_GFXNVIDIA = no
444endif
445ifeq ($(CONFIG_SATASII), yes)
446UNSUPPORTED_FEATURES += CONFIG_SATASII=yes
447else
448override CONFIG_SATASII = no
449endif
450ifeq ($(CONFIG_ATAHPT), yes)
451UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
452else
453override CONFIG_ATAHPT = no
454endif
455ifeq ($(CONFIG_ATAVIA), yes)
456UNSUPPORTED_FEATURES += CONFIG_ATAVIA=yes
457else
458override CONFIG_ATAVIA = no
459endif
460ifeq ($(CONFIG_ATAPROMISE), yes)
461UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
462else
463override CONFIG_ATAPROMISE = no
464endif
Carl-Daniel Hailfinger8d0d53f2016-02-25 20:10:26 +0000465ifeq ($(CONFIG_DRKAISER), yes)
466UNSUPPORTED_FEATURES += CONFIG_DRKAISER=yes
467else
468override CONFIG_DRKAISER = no
469endif
470ifeq ($(CONFIG_NICREALTEK), yes)
471UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
472else
473override CONFIG_NICREALTEK = no
474endif
475ifeq ($(CONFIG_NICNATSEMI), yes)
476UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
477else
478override CONFIG_NICNATSEMI = no
479endif
480ifeq ($(CONFIG_NICINTEL), yes)
481UNSUPPORTED_FEATURES += CONFIG_NICINTEL=yes
482else
483override CONFIG_NICINTEL = no
484endif
485ifeq ($(CONFIG_NICINTEL_SPI), yes)
486UNSUPPORTED_FEATURES += CONFIG_NICINTEL_SPI=yes
487else
488override CONFIG_NICINTEL_SPI = no
489endif
490ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
491UNSUPPORTED_FEATURES += CONFIG_NICINTEL_EEPROM=yes
492else
493override CONFIG_NICINTEL_EEPROM = no
494endif
495ifeq ($(CONFIG_OGP_SPI), yes)
496UNSUPPORTED_FEATURES += CONFIG_OGP_SPI=yes
497else
498override CONFIG_OGP_SPI = no
499endif
500ifeq ($(CONFIG_SATAMV), yes)
501UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
502else
503override CONFIG_SATAMV = no
504endif
505ifeq ($(CONFIG_IT8212), yes)
506UNSUPPORTED_FEATURES += CONFIG_IT8212=yes
507else
508override CONFIG_IT8212 = no
509endif
510endif
511
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000512###############################################################################
513# Flash chip drivers and bus support infrastructure.
514
Stefan Tauner4404f732013-09-12 08:28:56 +0000515CHIP_OBJS = jedec.o stm50.o w39.o w29ee011.o \
Carl-Daniel Hailfingera8cf3622014-08-08 08:33:01 +0000516 sst28sf040.o 82802ab.o \
Stefan Tauner6ee37e22012-12-29 15:03:51 +0000517 sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o spi25_statusreg.o \
Boris Baykov50a56602016-06-11 18:28:59 +0200518 spi4ba.o opaque.o sfdp.o en29lv640b.o at45db.o
Sean Nelson5d134642009-12-24 16:54:21 +0000519
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000520###############################################################################
521# Library code.
Sean Nelson5d134642009-12-24 16:54:21 +0000522
Nico Huber305f4172013-06-14 11:55:26 +0200523LIB_OBJS = libflashrom.o layout.o flashrom.o udelay.o programmer.o helpers.o ich_descriptors.o
Sean Nelson5d134642009-12-24 16:54:21 +0000524
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000525###############################################################################
526# Frontend related stuff.
Ollie Lho184a4042005-11-26 21:55:36 +0000527
Stefan Tauner9b32de92014-08-08 23:52:33 +0000528CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o
Ollie Lho184a4042005-11-26 21:55:36 +0000529
Stefan Taunerfa25bc32017-10-04 03:47:26 +0200530# versioninfo.inc stores metadata required to build a packaged flashrom. It is generated by the export rule and
531# imported below. If versioninfo.inc is not found and the variables are not defined by the user, the info will
532# be obtained using util/getrevision.sh, which is the common case during development.
533-include versioninfo.inc
Stefan Tauner5bf6b852017-10-04 03:46:51 +0200534VERSION ?= $(shell ./util/getrevision.sh --revision)
Stefan Tauner96209122017-10-01 16:41:35 +0200535MAN_DATE ?= $(shell ./util/getrevision.sh --date $(PROGRAM).8.tmpl 2>/dev/null)
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +0000536
Stefan Tauner76347082016-11-27 17:45:49 +0100537SCMDEF := -D'FLASHROM_VERSION="$(VERSION)"'
Bernhard Walle201bde32008-01-21 15:24:22 +0000538
Stefan Tauner76347082016-11-27 17:45:49 +0100539# No spaces in release names unless set explicitly
540RELEASENAME ?= $(shell echo "$(VERSION)" | sed -e 's/ /_/')
541
542# Inform user of the version string
543$(info Replacing all version templates with $(VERSION).)
Stefan Taunerd5ff8452015-01-10 09:32:07 +0000544
Stefan Tauner96209122017-10-01 16:41:35 +0200545# If a VCS is found then try to install hooks.
546$(shell ./util/getrevision.sh -c 2>/dev/null && ./util/git-hooks/install.sh)
547
Stefan Tauner037cd842013-08-25 00:10:56 +0000548###############################################################################
549# Default settings of CONFIG_* variables.
550
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000551# Always enable internal/onboard support for now.
552CONFIG_INTERNAL ?= yes
553
Stefan Tauner52b6e9d2013-04-01 00:46:05 +0000554# Always enable serprog for now.
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000555CONFIG_SERPROG ?= yes
556
Carl-Daniel Hailfingere7fdd6e2010-07-21 10:26:01 +0000557# RayeR SPIPGM hardware support
558CONFIG_RAYER_SPI ?= yes
559
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000560# PonyProg2000 SPI hardware support
561CONFIG_PONY_SPI ?= yes
562
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000563# Always enable 3Com NICs for now.
564CONFIG_NIC3COM ?= yes
565
Carl-Daniel Hailfingerbf3af292010-07-29 14:41:46 +0000566# Enable NVIDIA graphics cards. Note: write and erase do not work properly.
567CONFIG_GFXNVIDIA ?= yes
Uwe Hermann2bc98f62009-09-30 18:29:55 +0000568
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000569# Always enable SiI SATA controllers for now.
570CONFIG_SATASII ?= yes
571
Uwe Hermannddd5c9e2010-02-21 21:17:00 +0000572# Highpoint (HPT) ATA/RAID controller support.
573# IMPORTANT: This code is not yet working!
574CONFIG_ATAHPT ?= no
575
Jonathan Kollasch7f0f3fa2014-06-01 10:26:23 +0000576# VIA VT6421A LPC memory support
577CONFIG_ATAVIA ?= yes
578
Joseph C. Lehnerc2644a32016-01-16 23:45:25 +0000579# Promise ATA controller support.
580CONFIG_ATAPROMISE ?= no
581
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000582# Always enable FT2232 SPI dongles for now.
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000583CONFIG_FT2232_SPI ?= yes
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000584
James Lairdc60de0e2013-03-27 13:00:23 +0000585# Always enable Altera USB-Blaster dongles for now.
586CONFIG_USBBLASTER_SPI ?= yes
587
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000588# MSTAR DDC support needs more tests/reviews/cleanups.
589CONFIG_MSTARDDC_SPI ?= no
590
Justin Chevrier66e554b2015-02-08 21:58:10 +0000591# Always enable PICkit2 SPI dongles for now.
592CONFIG_PICKIT2_SPI ?= yes
593
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000594# Always enable dummy tracing for now.
595CONFIG_DUMMY ?= yes
596
597# Always enable Dr. Kaiser for now.
598CONFIG_DRKAISER ?= yes
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000599
Joerg Fischer5665ef32010-05-21 21:54:07 +0000600# Always enable Realtek NICs for now.
601CONFIG_NICREALTEK ?= yes
602
Andrew Morganc29c2e72010-06-07 22:37:54 +0000603# Disable National Semiconductor NICs until support is complete and tested.
604CONFIG_NICNATSEMI ?= no
605
Carl-Daniel Hailfingerb713d2e2011-05-08 00:24:18 +0000606# Always enable Intel NICs for now.
607CONFIG_NICINTEL ?= yes
608
Idwer Vollering004f4b72010-09-03 18:21:21 +0000609# Always enable SPI on Intel NICs for now.
610CONFIG_NICINTEL_SPI ?= yes
611
Ricardo Ribalda Delgado2a41f0a2014-07-28 20:35:21 +0000612# Always enable EEPROM on Intel NICs for now.
613CONFIG_NICINTEL_EEPROM ?= yes
614
Mark Marshall90021f22010-12-03 14:48:11 +0000615# Always enable SPI on OGP cards for now.
616CONFIG_OGP_SPI ?= yes
617
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000618# Always enable Bus Pirate SPI for now.
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000619CONFIG_BUSPIRATE_SPI ?= yes
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000620
Simon Glassae616512016-01-23 23:27:58 +0000621# Always enable Dediprog SF100 for now.
622CONFIG_DEDIPROG ?= yes
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000623
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000624# Always enable Marvell SATA controllers for now.
625CONFIG_SATAMV ?= yes
626
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000627# Enable Linux spidev interface by default. We disable it on non-Linux targets.
628CONFIG_LINUX_SPI ?= yes
629
Kyösti Mälkki72d42f82014-06-01 23:48:31 +0000630# Always enable ITE IT8212F PATA controllers for now.
631CONFIG_IT8212 ?= yes
632
Urja Rannikko0870b022016-01-31 22:10:29 +0000633# Winchiphead CH341A
634CONFIG_CH341A_SPI ?= yes
635
Carl-Daniel Hailfinger6161ff12009-11-16 21:22:24 +0000636# Disable wiki printing by default. It is only useful if you have wiki access.
Uwe Hermann2db77a02010-06-04 17:07:39 +0000637CONFIG_PRINT_WIKI ?= no
Carl-Daniel Hailfinger9c8476b2009-09-16 12:19:03 +0000638
Stefan Taunerf3503372016-02-26 23:51:21 +0000639# Disable all features if CONFIG_NOTHING=yes is given unless CONFIG_EVERYTHING was also set
640ifeq ($(CONFIG_NOTHING), yes)
641 ifeq ($(CONFIG_EVERYTHING), yes)
642 $(error Setting CONFIG_NOTHING=yes and CONFIG_EVERYTHING=yes does not make sense)
643 endif
644 $(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\
645 $(if $(filter yes, $($(var))),\
646 $(eval $(var)=no)))
647endif
648
Patrick Georgiced7ab62015-01-19 19:52:34 +0000649# Enable all features if CONFIG_EVERYTHING=yes is given
650ifeq ($(CONFIG_EVERYTHING), yes)
651$(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\
652 $(if $(filter no, $($(var))),\
653 $(eval $(var)=yes)))
654endif
655
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +0000656# Disable feature groups
657ifeq ($(CONFIG_ENABLE_LIBUSB0_PROGRAMMERS), no)
658override CONFIG_PICKIT2_SPI = no
659endif
660ifeq ($(CONFIG_ENABLE_LIBUSB1_PROGRAMMERS), no)
661override CONFIG_CH341A_SPI = no
662override CONFIG_DEDIPROG = no
663endif
664ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no)
Stefan Tauner0be072c2016-03-13 15:16:30 +0000665override CONFIG_INTERNAL = no
666override CONFIG_NIC3COM = no
667override CONFIG_GFXNVIDIA = no
668override CONFIG_SATASII = no
669override CONFIG_ATAHPT = no
670override CONFIG_ATAVIA = no
671override CONFIG_ATAPROMISE = no
672override CONFIG_IT8212 = no
673override CONFIG_DRKAISER = no
674override CONFIG_NICREALTEK = no
675override CONFIG_NICNATSEMI = no
676override CONFIG_NICINTEL = no
677override CONFIG_NICINTEL_SPI = no
678override CONFIG_NICINTEL_EEPROM = no
679override CONFIG_OGP_SPI = no
680override CONFIG_SATAMV = no
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +0000681endif
682
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000683# Bitbanging SPI infrastructure, default off unless needed.
684ifeq ($(CONFIG_RAYER_SPI), yes)
685override CONFIG_BITBANG_SPI = yes
686else
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000687ifeq ($(CONFIG_PONY_SPI), yes)
688override CONFIG_BITBANG_SPI = yes
689else
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000690ifeq ($(CONFIG_INTERNAL), yes)
691override CONFIG_BITBANG_SPI = yes
692else
693ifeq ($(CONFIG_NICINTEL_SPI), yes)
694override CONFIG_BITBANG_SPI = yes
695else
Mark Marshall90021f22010-12-03 14:48:11 +0000696ifeq ($(CONFIG_OGP_SPI), yes)
697override CONFIG_BITBANG_SPI = yes
698else
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000699CONFIG_BITBANG_SPI ?= no
700endif
701endif
702endif
Mark Marshall90021f22010-12-03 14:48:11 +0000703endif
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000704endif
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000705
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000706###############################################################################
Sean Nelson4c6d3a42013-09-11 23:35:03 +0000707# Handle CONFIG_* variables that depend on others set (and verified) above.
708
709# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled.
710ifeq ($(TARGET_OS), libpayload)
711ifeq ($(CONFIG_INTERNAL), yes)
712ifeq ($(CONFIG_INTERNAL_DMI), no)
713UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no
714else
715override CONFIG_INTERNAL_DMI = yes
716endif
717endif
718endif
719
720# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode.
721CONFIG_INTERNAL_DMI ?= yes
722
723###############################################################################
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000724# Programmer drivers and programmer support infrastructure.
Stefan Tauner037cd842013-08-25 00:10:56 +0000725# Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below.
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000726
Stefan Taunerfd0d4132012-09-25 21:24:55 +0000727FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER=$(CONFIG_DEFAULT_PROGRAMMER)'
Stefan Tauner265fcac2014-06-02 00:12:23 +0000728FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_ARGS="$(CONFIG_DEFAULT_PROGRAMMER_ARGS)"'
Stefan Taunerfd0d4132012-09-25 21:24:55 +0000729
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000730ifeq ($(CONFIG_INTERNAL), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000731FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
Sean Nelson4c6d3a42013-09-11 23:35:03 +0000732PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000733ifeq ($(ARCH), x86)
Rudolf Marek70e14592013-07-25 22:58:56 +0000734PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o
Nico Huber305f4172013-06-14 11:55:26 +0200735PROGRAMMER_OBJS += ichspi.o dmi.o
Sean Nelson4c6d3a42013-09-11 23:35:03 +0000736ifeq ($(CONFIG_INTERNAL_DMI), yes)
737FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1'
738endif
Carl-Daniel Hailfinger91199a12011-07-07 06:59:18 +0000739else
740endif
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000741NEED_LIBPCI += CONFIG_INTERNAL
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000742endif
743
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000744ifeq ($(CONFIG_SERPROG), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000745FEATURE_CFLAGS += -D'CONFIG_SERPROG=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000746PROGRAMMER_OBJS += serprog.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000747NEED_SERIAL += CONFIG_SERPROG
748NEED_POSIX_SOCKETS += CONFIG_SERPROG
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000749endif
750
Carl-Daniel Hailfingere7fdd6e2010-07-21 10:26:01 +0000751ifeq ($(CONFIG_RAYER_SPI), yes)
752FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1'
753PROGRAMMER_OBJS += rayer_spi.o
Carl-Daniel Hailfinger16c0aec2016-02-20 21:43:56 +0000754NEED_RAW_ACCESS += CONFIG_RAYER_SPI
Carl-Daniel Hailfingere7fdd6e2010-07-21 10:26:01 +0000755endif
756
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000757ifeq ($(CONFIG_PONY_SPI), yes)
758FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1'
759PROGRAMMER_OBJS += pony_spi.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000760NEED_SERIAL += CONFIG_PONY_SPI
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000761endif
762
Carl-Daniel Hailfinger547872b2009-09-28 13:15:16 +0000763ifeq ($(CONFIG_BITBANG_SPI), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000764FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000765PROGRAMMER_OBJS += bitbang_spi.o
Carl-Daniel Hailfinger547872b2009-09-28 13:15:16 +0000766endif
767
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000768ifeq ($(CONFIG_NIC3COM), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000769FEATURE_CFLAGS += -D'CONFIG_NIC3COM=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000770PROGRAMMER_OBJS += nic3com.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000771NEED_LIBPCI += CONFIG_NIC3COM
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000772endif
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000773
Uwe Hermann2bc98f62009-09-30 18:29:55 +0000774ifeq ($(CONFIG_GFXNVIDIA), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000775FEATURE_CFLAGS += -D'CONFIG_GFXNVIDIA=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000776PROGRAMMER_OBJS += gfxnvidia.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000777NEED_LIBPCI += CONFIG_GFXNVIDIA
Uwe Hermann2bc98f62009-09-30 18:29:55 +0000778endif
779
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000780ifeq ($(CONFIG_SATASII), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000781FEATURE_CFLAGS += -D'CONFIG_SATASII=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000782PROGRAMMER_OBJS += satasii.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000783NEED_LIBPCI += CONFIG_SATASII
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000784endif
785
Uwe Hermannddd5c9e2010-02-21 21:17:00 +0000786ifeq ($(CONFIG_ATAHPT), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000787FEATURE_CFLAGS += -D'CONFIG_ATAHPT=1'
Uwe Hermannddd5c9e2010-02-21 21:17:00 +0000788PROGRAMMER_OBJS += atahpt.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000789NEED_LIBPCI += CONFIG_ATAHPT
Uwe Hermannddd5c9e2010-02-21 21:17:00 +0000790endif
791
Jonathan Kollasch7f0f3fa2014-06-01 10:26:23 +0000792ifeq ($(CONFIG_ATAVIA), yes)
793FEATURE_CFLAGS += -D'CONFIG_ATAVIA=1'
794PROGRAMMER_OBJS += atavia.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000795NEED_LIBPCI += CONFIG_ATAVIA
Jonathan Kollasch7f0f3fa2014-06-01 10:26:23 +0000796endif
797
Joseph C. Lehnerc2644a32016-01-16 23:45:25 +0000798ifeq ($(CONFIG_ATAPROMISE), yes)
799FEATURE_CFLAGS += -D'CONFIG_ATAPROMISE=1'
800PROGRAMMER_OBJS += atapromise.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000801NEED_LIBPCI += CONFIG_ATAPROMISE
Joseph C. Lehnerc2644a32016-01-16 23:45:25 +0000802endif
803
Kyösti Mälkki72d42f82014-06-01 23:48:31 +0000804ifeq ($(CONFIG_IT8212), yes)
805FEATURE_CFLAGS += -D'CONFIG_IT8212=1'
806PROGRAMMER_OBJS += it8212.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000807NEED_LIBPCI += CONFIG_IT8212
Kyösti Mälkki72d42f82014-06-01 23:48:31 +0000808endif
809
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000810ifeq ($(CONFIG_FT2232_SPI), yes)
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000811# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000812FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'")
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000813NEED_LIBFTDI += CONFIG_FT2232_SPI
James Lairdc60de0e2013-03-27 13:00:23 +0000814PROGRAMMER_OBJS += ft2232_spi.o
815endif
816
817ifeq ($(CONFIG_USBBLASTER_SPI), yes)
818# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000819FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_USBBLASTER_SPI=1'")
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000820NEED_LIBFTDI += CONFIG_USBBLASTER_SPI
James Lairdc60de0e2013-03-27 13:00:23 +0000821PROGRAMMER_OBJS += usbblaster_spi.o
822endif
823
Justin Chevrier66e554b2015-02-08 21:58:10 +0000824ifeq ($(CONFIG_PICKIT2_SPI), yes)
825FEATURE_CFLAGS += -D'CONFIG_PICKIT2_SPI=1'
826PROGRAMMER_OBJS += pickit2_spi.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000827NEED_LIBUSB0 += CONFIG_PICKIT2_SPI
Justin Chevrier66e554b2015-02-08 21:58:10 +0000828endif
829
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000830ifneq ($(NEED_LIBFTDI), )
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000831FTDILIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libftdi1 || $(PKG_CONFIG) --libs libftdi || printf "%s" "-lftdi -lusb")
832FEATURE_CFLAGS += $(call debug_shell,grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'")
833FTDI_INCLUDES := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --cflags-only-I libftdi1)
Alexandru Gagniuc3d06abe2015-12-25 22:42:45 +0000834FEATURE_CFLAGS += $(FTDI_INCLUDES)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000835FEATURE_LIBS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)")
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000836# We can't set NEED_LIBUSB0 here because that would transform libftdi auto-enabling
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000837# into a hard requirement for libusb, defeating the purpose of auto-enabling.
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000838endif
839
840ifeq ($(CONFIG_DUMMY), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000841FEATURE_CFLAGS += -D'CONFIG_DUMMY=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000842PROGRAMMER_OBJS += dummyflasher.o
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000843endif
844
845ifeq ($(CONFIG_DRKAISER), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000846FEATURE_CFLAGS += -D'CONFIG_DRKAISER=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000847PROGRAMMER_OBJS += drkaiser.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000848NEED_LIBPCI += CONFIG_DRKAISER
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000849endif
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000850
Joerg Fischer5665ef32010-05-21 21:54:07 +0000851ifeq ($(CONFIG_NICREALTEK), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000852FEATURE_CFLAGS += -D'CONFIG_NICREALTEK=1'
Joerg Fischer5665ef32010-05-21 21:54:07 +0000853PROGRAMMER_OBJS += nicrealtek.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000854NEED_LIBPCI += CONFIG_NICREALTEK
Joerg Fischer5665ef32010-05-21 21:54:07 +0000855endif
856
Andrew Morganc29c2e72010-06-07 22:37:54 +0000857ifeq ($(CONFIG_NICNATSEMI), yes)
858FEATURE_CFLAGS += -D'CONFIG_NICNATSEMI=1'
859PROGRAMMER_OBJS += nicnatsemi.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000860NEED_LIBPCI += CONFIG_NICNATSEMI
Andrew Morganc29c2e72010-06-07 22:37:54 +0000861endif
862
Carl-Daniel Hailfingerb713d2e2011-05-08 00:24:18 +0000863ifeq ($(CONFIG_NICINTEL), yes)
864FEATURE_CFLAGS += -D'CONFIG_NICINTEL=1'
865PROGRAMMER_OBJS += nicintel.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000866NEED_LIBPCI += CONFIG_NICINTEL
Carl-Daniel Hailfingerb713d2e2011-05-08 00:24:18 +0000867endif
868
Idwer Vollering004f4b72010-09-03 18:21:21 +0000869ifeq ($(CONFIG_NICINTEL_SPI), yes)
870FEATURE_CFLAGS += -D'CONFIG_NICINTEL_SPI=1'
871PROGRAMMER_OBJS += nicintel_spi.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000872NEED_LIBPCI += CONFIG_NICINTEL_SPI
Idwer Vollering004f4b72010-09-03 18:21:21 +0000873endif
874
Ricardo Ribalda Delgado2a41f0a2014-07-28 20:35:21 +0000875ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
876FEATURE_CFLAGS += -D'CONFIG_NICINTEL_EEPROM=1'
877PROGRAMMER_OBJS += nicintel_eeprom.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000878NEED_LIBPCI += CONFIG_NICINTEL_EEPROM
Ricardo Ribalda Delgado2a41f0a2014-07-28 20:35:21 +0000879endif
880
Mark Marshall90021f22010-12-03 14:48:11 +0000881ifeq ($(CONFIG_OGP_SPI), yes)
882FEATURE_CFLAGS += -D'CONFIG_OGP_SPI=1'
883PROGRAMMER_OBJS += ogp_spi.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000884NEED_LIBPCI += CONFIG_OGP_SPI
Mark Marshall90021f22010-12-03 14:48:11 +0000885endif
886
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000887ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
888FEATURE_CFLAGS += -D'CONFIG_BUSPIRATE_SPI=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000889PROGRAMMER_OBJS += buspirate_spi.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000890NEED_SERIAL += CONFIG_BUSPIRATE_SPI
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000891endif
892
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000893ifeq ($(CONFIG_DEDIPROG), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000894FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1'
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000895PROGRAMMER_OBJS += dediprog.o
Nico Huberd99a2bd2016-02-18 21:42:49 +0000896NEED_LIBUSB1 += CONFIG_DEDIPROG
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000897endif
898
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000899ifeq ($(CONFIG_SATAMV), yes)
900FEATURE_CFLAGS += -D'CONFIG_SATAMV=1'
901PROGRAMMER_OBJS += satamv.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000902NEED_LIBPCI += CONFIG_SATAMV
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000903endif
904
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000905ifeq ($(CONFIG_LINUX_SPI), yes)
Stefan Tauner8868db32012-03-13 00:18:19 +0000906# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000907FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_SPI_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_SPI=1'")
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000908PROGRAMMER_OBJS += linux_spi.o
909endif
910
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000911ifeq ($(CONFIG_MSTARDDC_SPI), yes)
912# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000913FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'")
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000914NEED_LINUX_I2C += CONFIG_MSTARDDC_SPI
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000915PROGRAMMER_OBJS += mstarddc_spi.o
916endif
917
Urja Rannikko0870b022016-01-31 22:10:29 +0000918ifeq ($(CONFIG_CH341A_SPI), yes)
919FEATURE_CFLAGS += -D'CONFIG_CH341A_SPI=1'
920PROGRAMMER_OBJS += ch341a_spi.o
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000921NEED_LIBUSB1 += CONFIG_CH341A_SPI
Urja Rannikko0870b022016-01-31 22:10:29 +0000922endif
923
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000924ifneq ($(NEED_SERIAL), )
Urja Rannikko615ba182017-06-15 15:28:27 +0300925LIB_OBJS += serial.o custom_baud.o
Carl-Daniel Hailfinger5bdf2982010-06-14 12:42:05 +0000926endif
927
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000928ifneq ($(NEED_POSIX_SOCKETS), )
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000929ifeq ($(TARGET_OS), SunOS)
Stefan Taunerfc3ecc22016-03-13 12:57:03 +0000930LIBS += -lsocket -lnsl
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000931endif
Carl-Daniel Hailfingere51ea102009-11-23 19:20:11 +0000932endif
933
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000934ifneq ($(NEED_LIBPCI), )
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000935CHECK_LIBPCI = yes
Carl-Daniel Hailfinger16c0aec2016-02-20 21:43:56 +0000936# This is a dirty hack, but it saves us from checking all PCI drivers and all platforms manually.
937# libpci may need raw memory, MSR or PCI port I/O on some platforms.
938# Individual drivers might have the same needs as well.
939NEED_RAW_ACCESS += $(NEED_LIBPCI)
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000940FEATURE_CFLAGS += -D'NEED_PCI=1'
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000941FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'")
Stefan Tauner56734502015-02-08 21:58:04 +0000942
Carl-Daniel Hailfinger16c0aec2016-02-20 21:43:56 +0000943PROGRAMMER_OBJS += pcidev.o
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000944ifeq ($(TARGET_OS), NetBSD)
Carl-Daniel Hailfinger460b2822010-06-04 23:24:57 +0000945# The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci.
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000946PCILIBS += -lpciutils -lpci
Carl-Daniel Hailfinger16c0aec2016-02-20 21:43:56 +0000947else
948PCILIBS += -lpci
949endif
950endif
951
952ifneq ($(NEED_RAW_ACCESS), )
953# Raw memory, MSR or PCI port I/O access.
954FEATURE_CFLAGS += -D'NEED_RAW_ACCESS=1'
955PROGRAMMER_OBJS += physmap.o hwaccess.o
956
957ifeq ($(TARGET_OS), NetBSD)
Carl-Daniel Hailfinger460b2822010-06-04 23:24:57 +0000958# For (i386|x86_64)_iopl(2).
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000959PCILIBS += -l$(shell uname -p)
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000960else
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000961ifeq ($(TARGET_OS), OpenBSD)
Carl-Daniel Hailfingerb63b0672010-07-02 17:12:50 +0000962# For (i386|amd64)_iopl(2).
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000963PCILIBS += -l$(shell uname -m)
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000964else
965ifeq ($(TARGET_OS), Darwin)
966# DirectHW framework can be found in the DirectHW library.
Stefan Taunere34e3e82013-01-01 00:06:51 +0000967PCILIBS += -framework IOKit -framework DirectHW
Carl-Daniel Hailfingerb63b0672010-07-02 17:12:50 +0000968endif
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000969endif
Jonathan A. Kollasch3646c8f2010-01-08 21:18:08 +0000970endif
Carl-Daniel Hailfinger16c0aec2016-02-20 21:43:56 +0000971
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000972endif
973
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000974ifneq ($(NEED_LIBUSB0), )
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000975CHECK_LIBUSB0 = yes
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000976FEATURE_CFLAGS += -D'NEED_LIBUSB0=1'
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000977USBLIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libusb || printf "%s" "-lusb")
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000978endif
979
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +0000980ifneq ($(NEED_LIBUSB1), )
Stefan Taunere49edbb2016-01-31 22:10:14 +0000981CHECK_LIBUSB1 = yes
982FEATURE_CFLAGS += -D'NEED_LIBUSB1=1'
983# FreeBSD and DragonflyBSD use a reimplementation of libusb-1.0 that is simply called libusb
984ifeq ($(TARGET_OS),$(filter $(TARGET_OS),FreeBSD DragonFlyBSD))
985USB1LIBS += -lusb
986else
987ifeq ($(TARGET_OS),NetBSD)
Stefan Tauner45207062016-02-19 08:17:24 +0000988override CPPFLAGS += -I/usr/pkg/include/libusb-1.0
Stefan Taunere49edbb2016-01-31 22:10:14 +0000989USB1LIBS += -lusb-1.0
990else
Stefan Tauner45207062016-02-19 08:17:24 +0000991USB1LIBS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --libs libusb-1.0 || printf "%s" "-lusb-1.0")
992override CPPFLAGS += $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)"; $(PKG_CONFIG) --cflags-only-I libusb-1.0 || printf "%s" "-I/usr/include/libusb-1.0")
Stefan Taunere49edbb2016-01-31 22:10:14 +0000993endif
994endif
995endif
996
Carl-Daniel Hailfinger9c8476b2009-09-16 12:19:03 +0000997ifeq ($(CONFIG_PRINT_WIKI), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000998FEATURE_CFLAGS += -D'CONFIG_PRINT_WIKI=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000999CLI_OBJS += print_wiki.o
Carl-Daniel Hailfinger9c8476b2009-09-16 12:19:03 +00001000endif
1001
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001002FEATURE_CFLAGS += $(call debug_shell,grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'")
Carl-Daniel Hailfinger132e2ec2010-03-27 16:36:40 +00001003
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +00001004# We could use PULLED_IN_LIBS, but that would be ugly.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001005FEATURE_LIBS += $(call debug_shell,grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz")
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +00001006
Nico Huber8624e8c2012-11-05 21:46:33 +01001007FEATURE_CFLAGS += $(call debug_shell,grep -q "CLOCK_GETTIME := yes" .features && printf "%s" "-D'HAVE_CLOCK_GETTIME=1'")
1008FEATURE_LIBS += $(call debug_shell,grep -q "CLOCK_GETTIME := yes" .features && printf "%s" "-lrt")
1009
Patrick Georgi97bc95c2011-03-08 07:17:44 +00001010LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS)
Stefan Taunerd94d25d2012-07-28 03:17:15 +00001011OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS)
Sean Nelson5d134642009-12-24 16:54:21 +00001012
Joerg Mayera93d9dc2013-08-29 00:38:19 +00001013all: hwlibs features $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +00001014ifeq ($(ARCH), x86)
1015 @+$(MAKE) -C util/ich_descriptors_tool/ TARGET_OS=$(TARGET_OS) EXEC_SUFFIX=$(EXEC_SUFFIX)
1016endif
1017
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +00001018$(PROGRAM)$(EXEC_SUFFIX): $(OBJS)
Stefan Taunere49edbb2016-01-31 22:10:14 +00001019 $(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJS) $(LIBS) $(PCILIBS) $(FEATURE_LIBS) $(USBLIBS) $(USB1LIBS)
Ronald G. Minnich5e5f75e2002-01-29 18:21:41 +00001020
Patrick Georgi97bc95c2011-03-08 07:17:44 +00001021libflashrom.a: $(LIBFLASHROM_OBJS)
1022 $(AR) rcs $@ $^
1023 $(RANLIB) $@
1024
Carl-Daniel Hailfinger8ef7dce2009-07-10 20:19:48 +00001025# TAROPTIONS reduces information leakage from the packager's system.
1026# If other tar programs support command line arguments for setting uid/gid of
1027# stored files, they can be handled here as well.
1028TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root")
Carl-Daniel Hailfingerb18ecbc2009-06-19 14:20:34 +00001029
Paul Fox05dfbe62009-06-16 21:08:06 +00001030%.o: %.c .features
Stefan Tauner76347082016-11-27 17:45:49 +01001031 $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SCMDEF) -o $@ -c $<
Clark Rawlins02016f72008-02-14 23:22:20 +00001032
Carl-Daniel Hailfingera0020df2010-05-30 22:35:14 +00001033# Make sure to add all names of generated binaries here.
1034# This includes all frontends and libflashrom.
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +00001035# We don't use EXEC_SUFFIX here because we want to clean everything.
Ronald G. Minnich5e5f75e2002-01-29 18:21:41 +00001036clean:
Stefan Tauner4c723152016-01-14 22:47:55 +00001037 rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE)
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +00001038 @+$(MAKE) -C util/ich_descriptors_tool/ clean
Ronald G. Minnicheaab50b2003-09-12 22:41:53 +00001039
Ollie Lho184a4042005-11-26 21:55:36 +00001040distclean: clean
Stefan Reinauere2f01582010-06-07 11:08:07 +00001041 rm -f .features .libdeps
Christian Ruppertdb9d9f42009-05-14 14:17:07 +00001042
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +00001043strip: $(PROGRAM)$(EXEC_SUFFIX)
1044 $(STRIP) $(STRIP_ARGS) $(PROGRAM)$(EXEC_SUFFIX)
Ronald G. Minnicheaab50b2003-09-12 22:41:53 +00001045
Stefan Tauner56787082011-08-18 02:27:19 +00001046# to define test programs we use verbatim variables, which get exported
1047# to environment variables and are referenced with $$<varname> later
1048
1049define COMPILER_TEST
1050int main(int argc, char **argv)
1051{
1052 (void) argc;
1053 (void) argv;
1054 return 0;
1055}
1056endef
1057export COMPILER_TEST
1058
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +00001059compiler: featuresavailable
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001060 @printf "Checking for a C compiler... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001061 @echo "$$COMPILER_TEST" > .test.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001062 @printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001063 @{ { { { { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >&2 && \
1064 echo "found." || { echo "not found."; \
1065 rm -f .test.c .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +00001066 @rm -f .test.c .test$(EXEC_SUFFIX)
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +00001067 @printf "Target arch is "
Carl-Daniel Hailfinger91199a12011-07-07 06:59:18 +00001068 @# FreeBSD wc will output extraneous whitespace.
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +00001069 @echo $(ARCH)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \
Carl-Daniel Hailfinger91199a12011-07-07 06:59:18 +00001070 ( echo "unknown. Aborting."; exit 1)
1071 @printf "%s\n" '$(ARCH)'
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +00001072 @printf "Target OS is "
1073 @# FreeBSD wc will output extraneous whitespace.
1074 @echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \
1075 ( echo "unknown. Aborting."; exit 1)
1076 @printf "%s\n" '$(TARGET_OS)'
Stefan Taunerd6c17f62013-09-12 14:04:31 +00001077ifeq ($(TARGET_OS), libpayload)
1078 @$(CC) --version 2>&1 | grep -q coreboot || \
1079 ( echo "Warning: It seems you are not using coreboot's reference compiler."; \
1080 echo "This might work but usually does not, please beware." )
1081endif
Carl-Daniel Hailfinger4cb7a962009-06-16 09:31:51 +00001082
Stefan Tauner56787082011-08-18 02:27:19 +00001083define LIBPCI_TEST
1084/* Avoid a failing test due to libpci header symbol shadowing breakage */
1085#define index shadow_workaround_index
Stefan Tauner8d21ff12015-01-10 09:33:06 +00001086#if !defined __NetBSD__
Stefan Tauner56787082011-08-18 02:27:19 +00001087#include <pci/pci.h>
Stefan Taunerc65b8552013-09-12 15:48:39 +00001088#else
1089#include <pciutils/pci.h>
1090#endif
Stefan Tauner56787082011-08-18 02:27:19 +00001091struct pci_access *pacc;
1092int main(int argc, char **argv)
1093{
1094 (void) argc;
1095 (void) argv;
1096 pacc = pci_alloc();
1097 return 0;
1098}
1099endef
1100export LIBPCI_TEST
1101
Stefan Tauner56734502015-02-08 21:58:04 +00001102define PCI_GET_DEV_TEST
1103/* Avoid a failing test due to libpci header symbol shadowing breakage */
1104#define index shadow_workaround_index
1105#if !defined __NetBSD__
1106#include <pci/pci.h>
1107#else
1108#include <pciutils/pci.h>
1109#endif
1110struct pci_access *pacc;
1111struct pci_dev *dev = {0};
1112int main(int argc, char **argv)
1113{
1114 (void) argc;
1115 (void) argv;
1116 pacc = pci_alloc();
1117 dev = pci_get_dev(pacc, dev->domain, dev->bus, dev->dev, 1);
1118 return 0;
1119}
1120endef
1121export PCI_GET_DEV_TEST
1122
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001123define LIBUSB0_TEST
Stefan Tauner0cbd8c22015-01-26 22:06:04 +00001124#include "platform.h"
1125#if IS_WINDOWS
1126#include <lusb0_usb.h>
1127#else
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001128#include <usb.h>
Stefan Tauner0cbd8c22015-01-26 22:06:04 +00001129#endif
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001130int main(int argc, char **argv)
1131{
1132 (void) argc;
1133 (void) argv;
1134 usb_init();
1135 return 0;
1136}
1137endef
1138export LIBUSB0_TEST
1139
Stefan Taunere49edbb2016-01-31 22:10:14 +00001140define LIBUSB1_TEST
1141#include <stddef.h>
1142#include <libusb.h>
1143int main(int argc, char **argv)
1144{
1145 (void)argc;
1146 (void)argv;
1147 libusb_init(NULL);
1148 return 0;
1149}
1150endef
1151export LIBUSB1_TEST
1152
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001153hwlibs: compiler
1154 @printf "" > .libdeps
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +00001155ifeq ($(CHECK_LIBPCI), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001156 @printf "Checking for libpci headers... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001157 @echo "$$LIBPCI_TEST" > .test.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001158 @printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001159 @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
1160 echo "found." || { echo "not found."; echo; \
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001161 echo "The following features require libpci: $(NEED_LIBPCI)."; \
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +00001162 echo "Please install libpci headers or disable all features"; \
1163 echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +00001164 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001165 rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
1166 @printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56734502015-02-08 21:58:04 +00001167 @echo "$$PCI_GET_DEV_TEST" > .test.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001168 @printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001169 @ { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
Stefan Tauner56734502015-02-08 21:58:04 +00001170 ( echo "new version (including PCI domain parameter)."; echo "OLD_PCI_GET_DEV := no" >> .libdeps ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001171 ( echo "old version (without PCI domain parameter)."; echo "OLD_PCI_GET_DEV := yes" >> .libdeps ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
1172 @printf "Checking if libpci is present and sufficient... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001173 @printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS)" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001174 @{ { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) 2>>$(BUILD_DETAILS_FILE) >&2 && \
1175 echo "yes." || { echo "no."; \
1176 printf "Checking if libz+libpci are present and sufficient..." ; \
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001177 { printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz" >>$(BUILD_DETAILS_FILE) ; \
1178 $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001179 echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo; \
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001180 echo "The following features require libpci: $(NEED_LIBPCI)."; \
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +00001181 echo "Please install libpci (package pciutils) and/or libz or disable all features"; \
1182 echo "mentioned above by specifying make CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no"; \
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +00001183 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001184 rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +00001185 @rm -f .test.c .test.o .test$(EXEC_SUFFIX)
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001186endif
1187ifeq ($(CHECK_LIBUSB0), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001188 @printf "Checking for libusb-0.1/libusb-compat headers... " | tee -a $(BUILD_DETAILS_FILE)
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001189 @echo "$$LIBUSB0_TEST" > .test.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001190 @printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001191 @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
1192 echo "found." || { echo "not found."; echo; \
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001193 echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +00001194 echo "Please install libusb-0.1 headers or libusb-compat headers or disable all features"; \
1195 echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no"; \
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001196 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001197 rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
1198 @printf "Checking if libusb-0.1 is usable... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001199 @printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS)" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001200 @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >&2 && \
1201 echo "yes." || { echo "no."; \
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001202 echo "The following features require libusb-0.1/libusb-compat: $(NEED_LIBUSB0)."; \
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +00001203 echo "Please install libusb-0.1 or libusb-compat or disable all features"; \
1204 echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no"; \
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001205 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001206 rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +00001207 @rm -f .test.c .test.o .test$(EXEC_SUFFIX)
Carl-Daniel Hailfinger8a59ff02009-12-24 03:33:11 +00001208endif
Stefan Taunere49edbb2016-01-31 22:10:14 +00001209ifeq ($(CHECK_LIBUSB1), yes)
1210 @printf "Checking for libusb-1.0 headers... " | tee -a $(BUILD_DETAILS_FILE)
1211 @echo "$$LIBUSB1_TEST" > .test.c
1212 @printf "\nexec: %s\n" "$(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o" >>$(BUILD_DETAILS_FILE)
1213 @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
1214 echo "found." || { echo "not found."; echo; \
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001215 echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +00001216 echo "Please install libusb-1.0 headers or disable all features"; \
1217 echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \
Stefan Taunere49edbb2016-01-31 22:10:14 +00001218 echo "See README for more information."; echo; \
1219 rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
1220 @printf "Checking if libusb-1.0 is usable... " | tee -a $(BUILD_DETAILS_FILE)
1221 @printf "\nexec: %s\n" "$(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS)" >>$(BUILD_DETAILS_FILE)
1222 @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USB1LIBS) >&2 && \
1223 echo "yes." || { echo "no."; \
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001224 echo "The following features require libusb-1.0: $(NEED_LIBUSB1)."; \
Carl-Daniel Hailfinger4b2b3152016-02-20 22:28:16 +00001225 echo "Please install libusb-1.0 or disable all features"; \
1226 echo "mentioned above by specifying make CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no"; \
Stefan Taunere49edbb2016-01-31 22:10:14 +00001227 echo "See README for more information."; echo; \
1228 rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
1229 @rm -f .test.c .test.o .test$(EXEC_SUFFIX)
1230endif
Stefan Reinauer53e96252005-12-01 16:19:24 +00001231
Carl-Daniel Hailfingerb18ecbc2009-06-19 14:20:34 +00001232.features: features
1233
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +00001234# If a user does not explicitly request a non-working feature, we should
1235# silently disable it. However, if a non-working (does not compile) feature
1236# is explicitly requested, we should bail out with a descriptive error message.
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +00001237# We also have to check that at least one programmer driver is enabled.
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +00001238featuresavailable:
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +00001239ifeq ($(PROGRAMMER_OBJS),)
1240 @echo "You have to enable at least one programmer driver!"
1241 @false
1242endif
1243ifneq ($(UNSUPPORTED_FEATURES), )
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +00001244 @echo "The following features are unavailable on your machine: $(UNSUPPORTED_FEATURES)"
1245 @false
1246endif
1247
Stefan Tauner56787082011-08-18 02:27:19 +00001248define FTDI_TEST
Stefan Tauner5c316f92015-02-08 21:57:52 +00001249#include <stdlib.h>
Stefan Tauner56787082011-08-18 02:27:19 +00001250#include <ftdi.h>
1251struct ftdi_context *ftdic = NULL;
1252int main(int argc, char **argv)
1253{
1254 (void) argc;
1255 (void) argv;
1256 return ftdi_init(ftdic);
1257}
1258endef
1259export FTDI_TEST
1260
Ilya A. Volynets-Evenbakh2c714ab2012-09-26 00:47:09 +00001261define FTDI_232H_TEST
1262#include <ftdi.h>
1263enum ftdi_chip_type type = TYPE_232H;
1264endef
1265export FTDI_232H_TEST
1266
Stefan Tauner56787082011-08-18 02:27:19 +00001267define UTSNAME_TEST
1268#include <sys/utsname.h>
1269struct utsname osinfo;
1270int main(int argc, char **argv)
1271{
1272 (void) argc;
1273 (void) argv;
1274 uname (&osinfo);
1275 return 0;
1276}
1277endef
1278export UTSNAME_TEST
1279
Stefan Tauner8868db32012-03-13 00:18:19 +00001280define LINUX_SPI_TEST
1281#include <linux/types.h>
1282#include <linux/spi/spidev.h>
1283
1284int main(int argc, char **argv)
1285{
1286 (void) argc;
1287 (void) argv;
1288 return 0;
1289}
1290endef
1291export LINUX_SPI_TEST
1292
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001293define LINUX_I2C_TEST
1294#include <linux/i2c-dev.h>
1295#include <linux/i2c.h>
1296
1297int main(int argc, char **argv)
1298{
1299 (void) argc;
1300 (void) argv;
1301 return 0;
1302}
1303endef
1304export LINUX_I2C_TEST
1305
Nico Huber8624e8c2012-11-05 21:46:33 +01001306define CLOCK_GETTIME_TEST
1307#include <time.h>
1308
1309int main(int argc, char **argv)
1310{
1311 struct timespec res;
1312 clock_gettime(CLOCK_REALTIME, &res);
1313 return 0;
1314}
1315endef
1316export CLOCK_GETTIME_TEST
1317
Carl-Daniel Hailfingerb18ecbc2009-06-19 14:20:34 +00001318features: compiler
1319 @echo "FEATURES := yes" > .features.tmp
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001320ifneq ($(NEED_LIBFTDI), )
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001321 @printf "Checking for FTDI support... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001322 @echo "$$FTDI_TEST" > .featuretest.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001323 @printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001324 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
1325 ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ; \
1326 printf "Checking for FT232H support in libftdi... " ; \
1327 echo "$$FTDI_232H_TEST" >> .featuretest.c ; \
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001328 printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS)" >>$(BUILD_DETAILS_FILE) ; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001329 { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
1330 ( echo "found."; echo "FT232H := yes" >> .features.tmp ) || \
1331 ( echo "not found."; echo "FT232H := no" >> .features.tmp ) } \
1332 ) || \
1333 ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) } \
1334 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Carl-Daniel Hailfinger8a59ff02009-12-24 03:33:11 +00001335endif
Stefan Tauner8868db32012-03-13 00:18:19 +00001336ifeq ($(CONFIG_LINUX_SPI), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001337 @printf "Checking if Linux SPI headers are present... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner8868db32012-03-13 00:18:19 +00001338 @echo "$$LINUX_SPI_TEST" > .featuretest.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001339 @printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001340 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
Stefan Tauner8868db32012-03-13 00:18:19 +00001341 ( echo "yes."; echo "LINUX_SPI_SUPPORT := yes" >> .features.tmp ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001342 ( echo "no."; echo "LINUX_SPI_SUPPORT := no" >> .features.tmp ) } \
1343 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner8868db32012-03-13 00:18:19 +00001344endif
Carl-Daniel Hailfingerf2daaca2016-02-17 22:25:12 +00001345ifneq ($(NEED_LINUX_I2C), )
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001346 @printf "Checking if Linux I2C headers are present... " | tee -a $(BUILD_DETAILS_FILE)
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001347 @echo "$$LINUX_I2C_TEST" > .featuretest.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001348 @printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001349 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001350 ( echo "yes."; echo "LINUX_I2C_SUPPORT := yes" >> .features.tmp ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001351 ( echo "no."; echo "LINUX_I2C_SUPPORT := no" >> .features.tmp ) } \
1352 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001353endif
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001354 @printf "Checking for utsname support... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001355 @echo "$$UTSNAME_TEST" > .featuretest.c
Stefan Taunerc83ddc12016-01-24 22:37:10 +00001356 @printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001357 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
Stefan Tauner56787082011-08-18 02:27:19 +00001358 ( echo "found."; echo "UTSNAME := yes" >> .features.tmp ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001359 ( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Nico Huber8624e8c2012-11-05 21:46:33 +01001360 @printf "Checking for clock_gettime support... " | tee -a $(BUILD_DETAILS_FILE)
1361 @echo "$$CLOCK_GETTIME_TEST" >.featuretest.c
1362 @printf "\nexec: %s\n" "$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -lrt .featuretest.c -o .featuretest$(EXEC_SUFFIX)" >>$(BUILD_DETAILS_FILE)
1363 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -lrt .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
1364 ( echo "found."; echo "CLOCK_GETTIME := yes" >>.features.tmp ) || \
1365 ( echo "not found."; echo "CLOCK_GETTIME := no" >>.features.tmp ) } \
1366 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001367 @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features
1368 @rm -f .featuretest.c .featuretest$(EXEC_SUFFIX)
Paul Fox05dfbe62009-06-16 21:08:06 +00001369
Stefan Tauner4c723152016-01-14 22:47:55 +00001370$(PROGRAM).8.html: $(PROGRAM).8
1371 @groff -mandoc -Thtml $< >$@
1372
Joerg Mayera93d9dc2013-08-29 00:38:19 +00001373$(PROGRAM).8: $(PROGRAM).8.tmpl
Stefan Tauner4c723152016-01-14 22:47:55 +00001374 @# Add the man page change date and version to the man page
Stefan Taunerf0cbbb02017-10-01 00:49:05 +02001375 @sed -e 's#.TH FLASHROM 8 .*#.TH FLASHROM 8 "$(MAN_DATE)" "$(VERSION)" "$(MAN_DATE)"#' <$< >$@
Joerg Mayera93d9dc2013-08-29 00:38:19 +00001376
1377install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
Uwe Hermannc2a9c9c2009-05-14 14:51:14 +00001378 mkdir -p $(DESTDIR)$(PREFIX)/sbin
Uwe Hermann56b2cb02009-05-21 15:59:58 +00001379 mkdir -p $(DESTDIR)$(MANDIR)/man8
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +00001380 $(INSTALL) -m 0755 $(PROGRAM)$(EXEC_SUFFIX) $(DESTDIR)$(PREFIX)/sbin
Uwe Hermann56b2cb02009-05-21 15:59:58 +00001381 $(INSTALL) -m 0644 $(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8
Uwe Hermannc113b572006-12-14 00:59:41 +00001382
Nico Huber454f6132012-12-10 13:34:10 +00001383libinstall: libflashrom.a libflashrom.h
1384 mkdir -p $(DESTDIR)$(PREFIX)/lib
1385 $(INSTALL) -m 0644 libflashrom.a $(DESTDIR)$(PREFIX)/lib
1386 mkdir -p $(DESTDIR)$(PREFIX)/include
1387 $(INSTALL) -m 0644 libflashrom.h $(DESTDIR)$(PREFIX)/include
1388
Stefan Tauner76347082016-11-27 17:45:49 +01001389_export: $(PROGRAM).8
1390 @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
1391 @mkdir -p "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
1392 @git archive HEAD | tar -x -C "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
Stefan Tauner2dc5d292017-10-04 02:18:33 +02001393# Generate versioninfo.inc containing metadata that would not be available in exported sources otherwise.
1394 @echo "VERSION = $(VERSION)" > "$(EXPORTDIR)/flashrom-$(RELEASENAME)/versioninfo.inc"
1395 @echo "MAN_DATE = $(MAN_DATE)" >> "$(EXPORTDIR)/flashrom-$(RELEASENAME)/versioninfo.inc"
Stefan Taunere4136852017-10-01 15:57:25 +02001396# Restore modification date of all tracked files not marked 'export-ignore' in .gitattributes.
1397# sed is required to filter out file names having the attribute set.
1398# The sed program saves the file name in the hold buffer and then checks if the respective value is 'set'.
1399# If so it ignores the rest of the program, which otherwise restores the file name and prints it.
Stefan Tauner76347082016-11-27 17:45:49 +01001400 @git ls-tree -r -z -t --full-name --name-only HEAD | \
1401 git check-attr -z --stdin export-ignore | \
Stefan Taunere4136852017-10-01 15:57:25 +02001402 sed -zne 'x;n;n;{/^set$$/b;};x;p;' | \
Stefan Tauner76347082016-11-27 17:45:49 +01001403 xargs -0 sh -c 'for f; do \
1404 touch -d $$(git log --pretty=format:%cI -1 HEAD -- "$$f") \
1405 "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$$f"; \
Stefan Taunere4136852017-10-01 15:57:25 +02001406 done' dummy_arg0
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +00001407
Stefan Tauner76347082016-11-27 17:45:49 +01001408export: _export
1409 @echo "Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/"
1410
1411tarball: _export
David Hendrickse1a960e2017-10-19 14:54:44 -07001412 @tar -cj --format=ustar -f "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2" -C $(EXPORTDIR)/ \
Stefan Tauner60f7a222017-10-01 15:45:06 +02001413 $(TAROPTIONS) "flashrom-$(RELEASENAME)/"
Stefan Tauner76347082016-11-27 17:45:49 +01001414# Delete the exported directory again because it is most likely what's expected by the user.
1415 @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)"
David Hendrickse1a960e2017-10-19 14:54:44 -07001416 @echo Created "$(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2"
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +00001417
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +00001418libpayload: clean
1419 make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +00001420
Stefan Tauner76347082016-11-27 17:45:49 +01001421.PHONY: all install clean distclean compiler hwlibs features _export export tarball featuresavailable libpayload
Ollie Lho184a4042005-11-26 21:55:36 +00001422
Stefan Tauner23e10b82016-01-23 16:16:49 +00001423# Disable implicit suffixes and built-in rules (for performance and profit)
1424.SUFFIXES:
1425
Stefan Reinauere2f01582010-06-07 11:08:07 +00001426-include $(OBJS:.o=.d)