blob: f416e76ce653f80c45c8c0632606860938ff7291 [file] [log] [blame]
Ollie Lho184a4042005-11-26 21:55:36 +00001#
Uwe Hermannf78cff12009-06-12 14:05:25 +00002# This file is part of the flashrom project.
3#
4# Copyright (C) 2005 coresystems GmbH <stepan@coresystems.de>
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +00005# Copyright (C) 2009,2010,2012 Carl-Daniel Hailfinger
Uwe Hermannf78cff12009-06-12 14:05:25 +00006#
7# This program is free software; you can redistribute it and/or modify
8# it under the terms of the GNU General Public License as published by
9# the Free Software Foundation; version 2 of the License.
10#
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY; without even the implied warranty of
13# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14# GNU General Public License for more details.
15#
16# You should have received a copy of the GNU General Public License
17# along with this program; if not, write to the Free Software
18# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Ollie Lho184a4042005-11-26 21:55:36 +000019#
Ronald G. Minnich5e5f75e2002-01-29 18:21:41 +000020
Ollie Lho184a4042005-11-26 21:55:36 +000021PROGRAM = flashrom
Ronald G. Minnicheaab50b2003-09-12 22:41:53 +000022
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000023###############################################################################
24# Defaults for the toolchain.
25
26# If you want to cross-compile, just run e.g.
27# make CC=i586-pc-msdosdjgpp-gcc
28# You may have to specify STRIP/AR/RANLIB as well.
Carl-Daniel Hailfingerb7bce8a2012-08-14 21:36:11 +000029#
30# Note for anyone editing this Makefile: gnumake will happily ignore any
31# changes in this Makefile to variables set on the command line.
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +000032STRIP ?= strip
Christian Ruppertdb9d9f42009-05-14 14:17:07 +000033INSTALL = install
Paul Fox05dfbe62009-06-16 21:08:06 +000034DIFF = diff
Christian Ruppertdb9d9f42009-05-14 14:17:07 +000035PREFIX ?= /usr/local
Uwe Hermann56b2cb02009-05-21 15:59:58 +000036MANDIR ?= $(PREFIX)/share/man
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +000037CFLAGS ?= -Os -Wall -Wshadow
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +000038EXPORTDIR ?= .
Patrick Georgi97bc95c2011-03-08 07:17:44 +000039RANLIB ?= ranlib
Stefan Tauner3f73ffe2016-01-07 17:45:59 +000040PKG_CONFIG ?= pkg-config
41BUILD_DETAILS_FILE ?= build_details.txt
Stefan Taunerbe62d3f2015-01-10 09:32:44 +000042
Stefan Taunerfd0d4132012-09-25 21:24:55 +000043# The following parameter changes the default programmer that will be used if there is no -p/--programmer
44# argument given when running flashrom. The predefined setting does not enable any default so that every
45# user has to declare the programmer he wants to use on every run. The rationale for this to be not set
46# (to e.g. the internal programmer) is that forgetting to specify this when working with another programmer
47# easily puts the system attached to the default programmer at risk (e.g. you want to flash coreboot to another
48# system attached to an external programmer while the default programmer is set to the internal programmer, and
49# you forget to use the -p parameter. This would (try to) overwrite the existing firmware of the computer
50# running flashrom). Please do not enable this without thinking about the possible consequences. Possible
51# values are those specified in enum programmer in programmer.h (which depend on other CONFIG_* options
52# evaluated below, namely those that enable/disable the various programmers).
53# Compilation will fail for unspecified values.
54CONFIG_DEFAULT_PROGRAMMER ?= PROGRAMMER_INVALID
Stefan Tauner265fcac2014-06-02 00:12:23 +000055# The following adds a default parameter for the default programmer set above (only).
56CONFIG_DEFAULT_PROGRAMMER_ARGS ?= ''
57# Example: compiling with
58# make CONFIG_DEFAULT_PROGRAMMER=PROGRAMMER_SERPROG CONFIG_DEFAULT_PROGRAMMER_ARGS="dev=/dev/ttyUSB0:1500000"
59# would make executing './flashrom' (almost) equivialent to './flashrom -p serprog:dev=/dev/ttyUSB0:1500000'.
Christian Ruppertdb9d9f42009-05-14 14:17:07 +000060
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000061# If your compiler spits out excessive warnings, run make WARNERROR=no
62# You shouldn't have to change this flag.
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +000063WARNERROR ?= yes
64
65ifeq ($(WARNERROR), yes)
66CFLAGS += -Werror
67endif
68
Stefan Taunere37735a2015-01-26 22:03:35 +000069ifdef LIBS_BASE
Stefan Taunerbe62d3f2015-01-10 09:32:44 +000070CPPFLAGS += -I$(LIBS_BASE)/include
Stefan Taunere37735a2015-01-26 22:03:35 +000071LDFLAGS += -L$(LIBS_BASE)/lib -Wl,-rpath -Wl,$(LIBS_BASE)/lib
72PKG_CONFIG_LIBDIR ?= $(LIBS_BASE)/lib/pkgconfig
73endif
Stefan Taunerbe62d3f2015-01-10 09:32:44 +000074
Stefan Taunerbfb067b2016-01-07 18:13:07 +000075ifeq ($(CONFIG_STATIC),yes)
76PKG_CONFIG += --static
77LDFLAGS += -static
78endif
79
Stefan Tauner1ca7c7f2016-01-14 23:05:55 +000080# Set LC_ALL=C to minimize influences of the locale.
81# However, this won't work for the majority of relevant commands because they use the $(shell) function and
82# GNU make does not relay variables exported within the makefile to their evironment.
83LC_ALL=C
84export LC_ALL
85
Stefan Tauner3f73ffe2016-01-07 17:45:59 +000086dummy_for_make_3_80:=$(shell printf "Build started on %s\n\n" "$$(date)" >$(BUILD_DETAILS_FILE))
Stefan Tauner1ca7c7f2016-01-14 23:05:55 +000087
88# Provide an easy way to execute a command, print its output to stdout and capture any error message on stderr
89# in the build details file together with the original stdout output.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +000090debug_shell = $(shell export LC_ALL=C ; { echo 'exec: export LC_ALL=C ; { $(1) ; }' >&2; { $(1) ; } | tee -a $(BUILD_DETAILS_FILE) ; echo >&2 ; } 2>>$(BUILD_DETAILS_FILE))
Stefan Tauner1ca7c7f2016-01-14 23:05:55 +000091
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000092###############################################################################
Stefan Tauner037cd842013-08-25 00:10:56 +000093# General OS-specific settings.
94# 1. Prepare for later by gathering information about host and target OS
95# 2. Set compiler flags and parameters according to OSes
96# 3. Likewise verify user-supplied CONFIG_* variables.
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +000097
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +000098# HOST_OS is only used to work around local toolchain issues.
Stefan Tauner037cd842013-08-25 00:10:56 +000099HOST_OS ?= $(shell uname)
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000100ifeq ($(HOST_OS), MINGW32_NT-5.1)
101# Explicitly set CC = gcc on MinGW, otherwise: "cc: command not found".
102CC = gcc
103endif
104ifneq ($(HOST_OS), SunOS)
Adam Kaufman064b1f22007-02-06 19:47:50 +0000105STRIP_ARGS = -s
106endif
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000107
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000108# Determine the destination OS.
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000109# IMPORTANT: The following line must be placed before TARGET_OS is ever used
110# (of course), but should come after any lines setting CC because the line
111# below uses CC itself.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000112override TARGET_OS := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E os.h 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"'))
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000113
114ifeq ($(TARGET_OS), Darwin)
Stefan Reinauer2fea3f32010-01-21 20:26:30 +0000115CPPFLAGS += -I/opt/local/include -I/usr/local/include
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000116LDFLAGS += -L/opt/local/lib -L/usr/local/lib
Stefan Reinauerf79edb92009-01-26 01:23:31 +0000117endif
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000118
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000119ifeq ($(TARGET_OS), FreeBSD)
Stefan Reinauer2fea3f32010-01-21 20:26:30 +0000120CPPFLAGS += -I/usr/local/include
Andriy Gapon65c1b862008-05-22 13:22:45 +0000121LDFLAGS += -L/usr/local/lib
122endif
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000123
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000124ifeq ($(TARGET_OS), OpenBSD)
Carl-Daniel Hailfingerb63b0672010-07-02 17:12:50 +0000125CPPFLAGS += -I/usr/local/include
126LDFLAGS += -L/usr/local/lib
127endif
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000128
Stefan Taunerc65b8552013-09-12 15:48:39 +0000129ifeq ($(TARGET_OS), NetBSD)
130CPPFLAGS += -I/usr/pkg/include
131LDFLAGS += -L/usr/pkg/lib
132endif
133
134ifeq ($(TARGET_OS), DragonFlyBSD)
Stefan Tauner8d21ff12015-01-10 09:33:06 +0000135CPPFLAGS += -I/usr/local/include
136LDFLAGS += -L/usr/local/lib
Stefan Taunerc65b8552013-09-12 15:48:39 +0000137endif
138
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000139ifeq ($(TARGET_OS), DOS)
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +0000140EXEC_SUFFIX := .exe
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000141# DJGPP has odd uint*_t definitions which cause lots of format string warnings.
Carl-Daniel Hailfingerb7bce8a2012-08-14 21:36:11 +0000142CFLAGS += -Wno-format
Stefan Tauner449abe22013-09-11 23:34:57 +0000143LIBS += -lgetopt
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000144# Bus Pirate, Serprog and PonyProg are not supported under DOS (missing serial support).
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000145ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
146UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes
147else
148override CONFIG_BUSPIRATE_SPI = no
149endif
150ifeq ($(CONFIG_SERPROG), yes)
151UNSUPPORTED_FEATURES += CONFIG_SERPROG=yes
152else
153override CONFIG_SERPROG = no
154endif
Stefan Taunerd94d25d2012-07-28 03:17:15 +0000155ifeq ($(CONFIG_PONY_SPI), yes)
156UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes
157else
158override CONFIG_PONY_SPI = no
159endif
Justin Chevrier66e554b2015-02-08 21:58:10 +0000160# Dediprog, USB-Blaster, PICkit2 and FT2232 are not supported under DOS (missing USB support).
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000161ifeq ($(CONFIG_DEDIPROG), yes)
162UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
163else
164override CONFIG_DEDIPROG = no
165endif
166ifeq ($(CONFIG_FT2232_SPI), yes)
167UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
168else
169override CONFIG_FT2232_SPI = no
170endif
James Lairdc60de0e2013-03-27 13:00:23 +0000171ifeq ($(CONFIG_USBBLASTER_SPI), yes)
172UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
173else
174override CONFIG_USBBLASTER_SPI = no
175endif
Justin Chevrier66e554b2015-02-08 21:58:10 +0000176ifeq ($(CONFIG_PICKIT2_SPI), yes)
177UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes
178else
179override CONFIG_PICKIT2_SPI = no
180endif
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000181endif
Ollie Lho184a4042005-11-26 21:55:36 +0000182
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000183# FIXME: Should we check for Cygwin/MSVC as well?
184ifeq ($(TARGET_OS), MinGW)
185EXEC_SUFFIX := .exe
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000186# MinGW doesn't have the ffs() function, but we can use gcc's __builtin_ffs().
Carl-Daniel Hailfingera8da2242012-08-15 23:06:32 +0000187FLASHROM_CFLAGS += -Dffs=__builtin_ffs
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000188# Some functions provided by Microsoft do not work as described in C99 specifications. This macro fixes that
Stefan Tauner23e10b82016-01-23 16:16:49 +0000189# for MinGW. See http://sourceforge.net/p/mingw-w64/wiki2/printf%20and%20scanf%20family/ */
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000190FLASHROM_CFLAGS += -D__USE_MINGW_ANSI_STDIO=1
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000191# For now we disable all PCI-based programmers on Windows/MinGW (no libpci).
192ifeq ($(CONFIG_INTERNAL), yes)
193UNSUPPORTED_FEATURES += CONFIG_INTERNAL=yes
194else
195override CONFIG_INTERNAL = no
196endif
197ifeq ($(CONFIG_RAYER_SPI), yes)
198UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
199else
200override CONFIG_RAYER_SPI = no
201endif
202ifeq ($(CONFIG_NIC3COM), yes)
203UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
204else
205override CONFIG_NIC3COM = no
206endif
207ifeq ($(CONFIG_GFXNVIDIA), yes)
208UNSUPPORTED_FEATURES += CONFIG_GFXNVIDIA=yes
209else
210override CONFIG_GFXNVIDIA = no
211endif
212ifeq ($(CONFIG_SATASII), yes)
213UNSUPPORTED_FEATURES += CONFIG_SATASII=yes
214else
215override CONFIG_SATASII = no
216endif
217ifeq ($(CONFIG_ATAHPT), yes)
218UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
219else
220override CONFIG_ATAHPT = no
221endif
Jonathan Kollasch7f0f3fa2014-06-01 10:26:23 +0000222ifeq ($(CONFIG_ATAVIA), yes)
223UNSUPPORTED_FEATURES += CONFIG_ATAVIA=yes
224else
225override CONFIG_ATAVIA = no
226endif
Joseph C. Lehnerc2644a32016-01-16 23:45:25 +0000227ifeq ($(CONFIG_ATAPROMISE), yes)
228UNSUPPORTED_FEATURES += CONFIG_ATAPROMISE=yes
229else
230override CONFIG_ATAPROMISE = no
231endif
Kyösti Mälkki72d42f82014-06-01 23:48:31 +0000232ifeq ($(CONFIG_IT8212), yes)
233UNSUPPORTED_FEATURES += CONFIG_IT8212=yes
234else
235override CONFIG_IT8212 = no
236endif
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000237ifeq ($(CONFIG_DRKAISER), yes)
238UNSUPPORTED_FEATURES += CONFIG_DRKAISER=yes
239else
240override CONFIG_DRKAISER = no
241endif
242ifeq ($(CONFIG_NICREALTEK), yes)
243UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
244else
245override CONFIG_NICREALTEK = no
246endif
247ifeq ($(CONFIG_NICNATSEMI), yes)
248UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
249else
250override CONFIG_NICNATSEMI = no
251endif
252ifeq ($(CONFIG_NICINTEL), yes)
253UNSUPPORTED_FEATURES += CONFIG_NICINTEL=yes
254else
255override CONFIG_NICINTEL = no
256endif
Ricardo Ribalda Delgado2a41f0a2014-07-28 20:35:21 +0000257ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
258UNSUPPORTED_FEATURES += CONFIG_NICINTEL_EEPROM=yes
259else
260override CONFIG_NICINTEL_EEPROM = no
261endif
Uwe Hermannd5e85d62011-07-03 19:44:12 +0000262ifeq ($(CONFIG_NICINTEL_SPI), yes)
263UNSUPPORTED_FEATURES += CONFIG_NICINTEL_SPI=yes
264else
265override CONFIG_NICINTEL_SPI = no
266endif
267ifeq ($(CONFIG_OGP_SPI), yes)
268UNSUPPORTED_FEATURES += CONFIG_OGP_SPI=yes
269else
270override CONFIG_OGP_SPI = no
271endif
272ifeq ($(CONFIG_SATAMV), yes)
273UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
274else
275override CONFIG_SATAMV = no
276endif
277endif
278
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000279ifeq ($(TARGET_OS), libpayload)
Stefan Tauner8e19b042013-08-28 09:55:04 +0000280ifeq ($(MAKECMDGOALS),)
281.DEFAULT_GOAL := libflashrom.a
282$(info Setting default goal to libflashrom.a)
283endif
Carl-Daniel Hailfingera8da2242012-08-15 23:06:32 +0000284FLASHROM_CFLAGS += -DSTANDALONE
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000285ifeq ($(CONFIG_DUMMY), yes)
286UNSUPPORTED_FEATURES += CONFIG_DUMMY=yes
287else
288override CONFIG_DUMMY = no
289endif
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000290# Bus Pirate, Serprog and PonyProg are not supported with libpayload (missing serial support).
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000291ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
292UNSUPPORTED_FEATURES += CONFIG_BUSPIRATE_SPI=yes
293else
294override CONFIG_BUSPIRATE_SPI = no
295endif
296ifeq ($(CONFIG_SERPROG), yes)
297UNSUPPORTED_FEATURES += CONFIG_SERPROG=yes
298else
299override CONFIG_SERPROG = no
300endif
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000301ifeq ($(CONFIG_PONY_SPI), yes)
302UNSUPPORTED_FEATURES += CONFIG_PONY_SPI=yes
303else
304override CONFIG_PONY_SPI = no
305endif
Justin Chevrier66e554b2015-02-08 21:58:10 +0000306# Dediprog, USB-Blaster, PICkit2 and FT2232 are not supported with libpayload (missing libusb support)
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000307ifeq ($(CONFIG_DEDIPROG), yes)
308UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
309else
310override CONFIG_DEDIPROG = no
311endif
312ifeq ($(CONFIG_FT2232_SPI), yes)
313UNSUPPORTED_FEATURES += CONFIG_FT2232_SPI=yes
314else
315override CONFIG_FT2232_SPI = no
316endif
James Lairdc60de0e2013-03-27 13:00:23 +0000317ifeq ($(CONFIG_USBBLASTER_SPI), yes)
318UNSUPPORTED_FEATURES += CONFIG_USBBLASTER_SPI=yes
319else
320override CONFIG_USBBLASTER_SPI = no
321endif
Justin Chevrier66e554b2015-02-08 21:58:10 +0000322ifeq ($(CONFIG_PICKIT2_SPI), yes)
323UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes
324else
325override CONFIG_PICKIT2_SPI = no
326endif
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000327endif
328
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000329ifneq ($(TARGET_OS), Linux)
330ifeq ($(CONFIG_LINUX_SPI), yes)
331UNSUPPORTED_FEATURES += CONFIG_LINUX_SPI=yes
332else
333override CONFIG_LINUX_SPI = no
334endif
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000335ifeq ($(CONFIG_MSTARDDC_SPI), yes)
336UNSUPPORTED_FEATURES += CONFIG_MSTARDDC_SPI=yes
337else
338override CONFIG_MSTARDDC_SPI = no
339endif
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000340endif
341
Stefan Tauner037cd842013-08-25 00:10:56 +0000342###############################################################################
343# General architecture-specific settings.
344# Like above for the OS, below we verify user-supplied options depending on the target architecture.
345
Uwe Hermann44ffd582011-08-20 14:16:00 +0000346# Determine the destination processor architecture.
347# IMPORTANT: The following line must be placed before ARCH is ever used
348# (of course), but should come after any lines setting CC because the line
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000349# below uses CC itself.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000350override ARCH := $(strip $(call debug_shell,$(CC) $(CPPFLAGS) -E archtest.c 2>/dev/null | grep -v '^\#' | grep '"' | cut -f 2 -d'"'))
Uwe Hermann44ffd582011-08-20 14:16:00 +0000351
Stefan Taunerfb2d77c2015-02-10 08:03:10 +0000352# PCI port I/O support is unimplemented on PPC/MIPS/SPARC and unavailable on ARM.
David Hendricksb286da72012-02-13 00:35:35 +0000353# Right now this means the drivers below only work on x86.
354ifneq ($(ARCH), x86)
Uwe Hermann21b10c62011-07-29 12:13:01 +0000355ifeq ($(CONFIG_NIC3COM), yes)
356UNSUPPORTED_FEATURES += CONFIG_NIC3COM=yes
357else
358override CONFIG_NIC3COM = no
359endif
360ifeq ($(CONFIG_NICREALTEK), yes)
361UNSUPPORTED_FEATURES += CONFIG_NICREALTEK=yes
362else
363override CONFIG_NICREALTEK = no
364endif
365ifeq ($(CONFIG_NICNATSEMI), yes)
366UNSUPPORTED_FEATURES += CONFIG_NICNATSEMI=yes
367else
368override CONFIG_NICNATSEMI = no
369endif
370ifeq ($(CONFIG_RAYER_SPI), yes)
371UNSUPPORTED_FEATURES += CONFIG_RAYER_SPI=yes
372else
373override CONFIG_RAYER_SPI = no
374endif
375ifeq ($(CONFIG_ATAHPT), yes)
376UNSUPPORTED_FEATURES += CONFIG_ATAHPT=yes
377else
378override CONFIG_ATAHPT = no
379endif
380ifeq ($(CONFIG_SATAMV), yes)
381UNSUPPORTED_FEATURES += CONFIG_SATAMV=yes
382else
383override CONFIG_SATAMV = no
384endif
385endif
386
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000387###############################################################################
388# Flash chip drivers and bus support infrastructure.
389
Stefan Tauner4404f732013-09-12 08:28:56 +0000390CHIP_OBJS = jedec.o stm50.o w39.o w29ee011.o \
Carl-Daniel Hailfingera8cf3622014-08-08 08:33:01 +0000391 sst28sf040.o 82802ab.o \
Stefan Tauner6ee37e22012-12-29 15:03:51 +0000392 sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o spi25_statusreg.o \
Aidan Thorntondb4e87d2013-08-27 18:01:53 +0000393 opaque.o sfdp.o en29lv640b.o at45db.o
Sean Nelson5d134642009-12-24 16:54:21 +0000394
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000395###############################################################################
396# Library code.
Sean Nelson5d134642009-12-24 16:54:21 +0000397
Stefan Tauner6ad6e012014-06-12 00:04:32 +0000398LIB_OBJS = layout.o flashrom.o udelay.o programmer.o helpers.o
Sean Nelson5d134642009-12-24 16:54:21 +0000399
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000400###############################################################################
401# Frontend related stuff.
Ollie Lho184a4042005-11-26 21:55:36 +0000402
Stefan Tauner9b32de92014-08-08 23:52:33 +0000403CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o
Ollie Lho184a4042005-11-26 21:55:36 +0000404
Stefan Taunerec7a35f2013-08-29 00:38:14 +0000405# Set the flashrom version string from the highest revision number of the checked out flashrom files.
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +0000406# Note to packagers: Any tree exported with "make export" or "make tarball"
407# will not require subversion. The downloadable snapshots are already exported.
Stefan Taunerd5ff8452015-01-10 09:32:07 +0000408SVNVERSION := $(shell ./util/getrevision.sh -u 2>/dev/null )
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +0000409
Stefan Taunerf4651f62015-03-01 22:05:16 +0000410RELEASE := 0.9.8
Stefan Taunerec7a35f2013-08-29 00:38:14 +0000411VERSION := $(RELEASE)-$(SVNVERSION)
Carl-Daniel Hailfinger48e5e092009-08-31 16:25:08 +0000412RELEASENAME ?= $(VERSION)
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +0000413
414SVNDEF := -D'FLASHROM_VERSION="$(VERSION)"'
Bernhard Walle201bde32008-01-21 15:24:22 +0000415
Stefan Taunerd5ff8452015-01-10 09:32:07 +0000416# Inform user if there is no meaningful version string. If there is version information from a VCS print
417# something anyway because $(info...) will print a line break in any case which would look suspicious.
Stefan Tauner5d1ad352015-01-25 23:57:08 +0000418# The && between the echos is a workaround for old versions of GNU make that issue the error "unterminated
419# variable reference" if a semicolon is used instead.
420$(info $(shell ./util/getrevision.sh -c 2>/dev/null || echo "Files don't seem to be under version control." && \
Stefan Taunerd5ff8452015-01-10 09:32:07 +0000421 echo "Replacing all version templates with $(VERSION)." ))
422
Stefan Tauner037cd842013-08-25 00:10:56 +0000423###############################################################################
424# Default settings of CONFIG_* variables.
425
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000426# Always enable internal/onboard support for now.
427CONFIG_INTERNAL ?= yes
428
Stefan Tauner52b6e9d2013-04-01 00:46:05 +0000429# Always enable serprog for now.
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000430CONFIG_SERPROG ?= yes
431
Carl-Daniel Hailfingere7fdd6e2010-07-21 10:26:01 +0000432# RayeR SPIPGM hardware support
433CONFIG_RAYER_SPI ?= yes
434
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000435# PonyProg2000 SPI hardware support
436CONFIG_PONY_SPI ?= yes
437
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000438# Always enable 3Com NICs for now.
439CONFIG_NIC3COM ?= yes
440
Carl-Daniel Hailfingerbf3af292010-07-29 14:41:46 +0000441# Enable NVIDIA graphics cards. Note: write and erase do not work properly.
442CONFIG_GFXNVIDIA ?= yes
Uwe Hermann2bc98f62009-09-30 18:29:55 +0000443
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000444# Always enable SiI SATA controllers for now.
445CONFIG_SATASII ?= yes
446
Uwe Hermannddd5c9e2010-02-21 21:17:00 +0000447# Highpoint (HPT) ATA/RAID controller support.
448# IMPORTANT: This code is not yet working!
449CONFIG_ATAHPT ?= no
450
Jonathan Kollasch7f0f3fa2014-06-01 10:26:23 +0000451# VIA VT6421A LPC memory support
452CONFIG_ATAVIA ?= yes
453
Joseph C. Lehnerc2644a32016-01-16 23:45:25 +0000454# Promise ATA controller support.
455CONFIG_ATAPROMISE ?= no
456
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000457# Always enable FT2232 SPI dongles for now.
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000458CONFIG_FT2232_SPI ?= yes
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000459
James Lairdc60de0e2013-03-27 13:00:23 +0000460# Always enable Altera USB-Blaster dongles for now.
461CONFIG_USBBLASTER_SPI ?= yes
462
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000463# MSTAR DDC support needs more tests/reviews/cleanups.
464CONFIG_MSTARDDC_SPI ?= no
465
Justin Chevrier66e554b2015-02-08 21:58:10 +0000466# Always enable PICkit2 SPI dongles for now.
467CONFIG_PICKIT2_SPI ?= yes
468
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000469# Always enable dummy tracing for now.
470CONFIG_DUMMY ?= yes
471
472# Always enable Dr. Kaiser for now.
473CONFIG_DRKAISER ?= yes
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000474
Joerg Fischer5665ef32010-05-21 21:54:07 +0000475# Always enable Realtek NICs for now.
476CONFIG_NICREALTEK ?= yes
477
Andrew Morganc29c2e72010-06-07 22:37:54 +0000478# Disable National Semiconductor NICs until support is complete and tested.
479CONFIG_NICNATSEMI ?= no
480
Carl-Daniel Hailfingerb713d2e2011-05-08 00:24:18 +0000481# Always enable Intel NICs for now.
482CONFIG_NICINTEL ?= yes
483
Idwer Vollering004f4b72010-09-03 18:21:21 +0000484# Always enable SPI on Intel NICs for now.
485CONFIG_NICINTEL_SPI ?= yes
486
Ricardo Ribalda Delgado2a41f0a2014-07-28 20:35:21 +0000487# Always enable EEPROM on Intel NICs for now.
488CONFIG_NICINTEL_EEPROM ?= yes
489
Mark Marshall90021f22010-12-03 14:48:11 +0000490# Always enable SPI on OGP cards for now.
491CONFIG_OGP_SPI ?= yes
492
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000493# Always enable Bus Pirate SPI for now.
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000494CONFIG_BUSPIRATE_SPI ?= yes
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000495
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000496# Disable Dediprog SF100 until support is complete and tested.
497CONFIG_DEDIPROG ?= no
498
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000499# Always enable Marvell SATA controllers for now.
500CONFIG_SATAMV ?= yes
501
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000502# Enable Linux spidev interface by default. We disable it on non-Linux targets.
503CONFIG_LINUX_SPI ?= yes
504
Kyösti Mälkki72d42f82014-06-01 23:48:31 +0000505# Always enable ITE IT8212F PATA controllers for now.
506CONFIG_IT8212 ?= yes
507
Carl-Daniel Hailfinger6161ff12009-11-16 21:22:24 +0000508# Disable wiki printing by default. It is only useful if you have wiki access.
Uwe Hermann2db77a02010-06-04 17:07:39 +0000509CONFIG_PRINT_WIKI ?= no
Carl-Daniel Hailfinger9c8476b2009-09-16 12:19:03 +0000510
Patrick Georgiced7ab62015-01-19 19:52:34 +0000511# Enable all features if CONFIG_EVERYTHING=yes is given
512ifeq ($(CONFIG_EVERYTHING), yes)
513$(foreach var, $(filter CONFIG_%, $(.VARIABLES)),\
514 $(if $(filter no, $($(var))),\
515 $(eval $(var)=yes)))
516endif
517
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000518# Bitbanging SPI infrastructure, default off unless needed.
519ifeq ($(CONFIG_RAYER_SPI), yes)
520override CONFIG_BITBANG_SPI = yes
521else
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000522ifeq ($(CONFIG_PONY_SPI), yes)
523override CONFIG_BITBANG_SPI = yes
524else
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000525ifeq ($(CONFIG_INTERNAL), yes)
526override CONFIG_BITBANG_SPI = yes
527else
528ifeq ($(CONFIG_NICINTEL_SPI), yes)
529override CONFIG_BITBANG_SPI = yes
530else
Mark Marshall90021f22010-12-03 14:48:11 +0000531ifeq ($(CONFIG_OGP_SPI), yes)
532override CONFIG_BITBANG_SPI = yes
533else
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000534CONFIG_BITBANG_SPI ?= no
535endif
536endif
537endif
Mark Marshall90021f22010-12-03 14:48:11 +0000538endif
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000539endif
Carl-Daniel Hailfinger9e3a6c42010-10-08 12:40:09 +0000540
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000541###############################################################################
Sean Nelson4c6d3a42013-09-11 23:35:03 +0000542# Handle CONFIG_* variables that depend on others set (and verified) above.
543
544# The external DMI decoder (dmidecode) does not work in libpayload. Bail out if the internal one got disabled.
545ifeq ($(TARGET_OS), libpayload)
546ifeq ($(CONFIG_INTERNAL), yes)
547ifeq ($(CONFIG_INTERNAL_DMI), no)
548UNSUPPORTED_FEATURES += CONFIG_INTERNAL_DMI=no
549else
550override CONFIG_INTERNAL_DMI = yes
551endif
552endif
553endif
554
555# Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode.
556CONFIG_INTERNAL_DMI ?= yes
557
558###############################################################################
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000559# Programmer drivers and programmer support infrastructure.
Stefan Tauner037cd842013-08-25 00:10:56 +0000560# Depending on the CONFIG_* variables set and verified above we set compiler flags and parameters below.
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000561
Stefan Taunerfd0d4132012-09-25 21:24:55 +0000562FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER=$(CONFIG_DEFAULT_PROGRAMMER)'
Stefan Tauner265fcac2014-06-02 00:12:23 +0000563FEATURE_CFLAGS += -D'CONFIG_DEFAULT_PROGRAMMER_ARGS="$(CONFIG_DEFAULT_PROGRAMMER_ARGS)"'
Stefan Taunerfd0d4132012-09-25 21:24:55 +0000564
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000565ifeq ($(CONFIG_INTERNAL), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000566FEATURE_CFLAGS += -D'CONFIG_INTERNAL=1'
Sean Nelson4c6d3a42013-09-11 23:35:03 +0000567PROGRAMMER_OBJS += processor_enable.o chipset_enable.o board_enable.o cbtable.o internal.o
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000568ifeq ($(ARCH), x86)
Rudolf Marek70e14592013-07-25 22:58:56 +0000569PROGRAMMER_OBJS += it87spi.o it85spi.o sb600spi.o amd_imc.o wbsio_spi.o mcp6x_spi.o
Sean Nelson4c6d3a42013-09-11 23:35:03 +0000570PROGRAMMER_OBJS += ichspi.o ich_descriptors.o dmi.o
571ifeq ($(CONFIG_INTERNAL_DMI), yes)
572FEATURE_CFLAGS += -D'CONFIG_INTERNAL_DMI=1'
573endif
Carl-Daniel Hailfinger91199a12011-07-07 06:59:18 +0000574else
575endif
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000576NEED_PCI := yes
577endif
578
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000579ifeq ($(CONFIG_SERPROG), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000580FEATURE_CFLAGS += -D'CONFIG_SERPROG=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000581PROGRAMMER_OBJS += serprog.o
Carl-Daniel Hailfinger5bdf2982010-06-14 12:42:05 +0000582NEED_SERIAL := yes
583NEED_NET := yes
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000584endif
585
Carl-Daniel Hailfingere7fdd6e2010-07-21 10:26:01 +0000586ifeq ($(CONFIG_RAYER_SPI), yes)
587FEATURE_CFLAGS += -D'CONFIG_RAYER_SPI=1'
588PROGRAMMER_OBJS += rayer_spi.o
589# Actually, NEED_PCI is wrong. NEED_IOPORT_ACCESS would be more correct.
590NEED_PCI := yes
591endif
592
Virgil-Adrian Teacada7c5452012-04-30 23:11:06 +0000593ifeq ($(CONFIG_PONY_SPI), yes)
594FEATURE_CFLAGS += -D'CONFIG_PONY_SPI=1'
595PROGRAMMER_OBJS += pony_spi.o
596NEED_SERIAL := yes
597endif
598
Carl-Daniel Hailfinger547872b2009-09-28 13:15:16 +0000599ifeq ($(CONFIG_BITBANG_SPI), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000600FEATURE_CFLAGS += -D'CONFIG_BITBANG_SPI=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000601PROGRAMMER_OBJS += bitbang_spi.o
Carl-Daniel Hailfinger547872b2009-09-28 13:15:16 +0000602endif
603
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000604ifeq ($(CONFIG_NIC3COM), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000605FEATURE_CFLAGS += -D'CONFIG_NIC3COM=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000606PROGRAMMER_OBJS += nic3com.o
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000607NEED_PCI := yes
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000608endif
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000609
Uwe Hermann2bc98f62009-09-30 18:29:55 +0000610ifeq ($(CONFIG_GFXNVIDIA), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000611FEATURE_CFLAGS += -D'CONFIG_GFXNVIDIA=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000612PROGRAMMER_OBJS += gfxnvidia.o
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000613NEED_PCI := yes
Uwe Hermann2bc98f62009-09-30 18:29:55 +0000614endif
615
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000616ifeq ($(CONFIG_SATASII), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000617FEATURE_CFLAGS += -D'CONFIG_SATASII=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000618PROGRAMMER_OBJS += satasii.o
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000619NEED_PCI := yes
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000620endif
621
Uwe Hermannddd5c9e2010-02-21 21:17:00 +0000622ifeq ($(CONFIG_ATAHPT), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000623FEATURE_CFLAGS += -D'CONFIG_ATAHPT=1'
Uwe Hermannddd5c9e2010-02-21 21:17:00 +0000624PROGRAMMER_OBJS += atahpt.o
625NEED_PCI := yes
626endif
627
Jonathan Kollasch7f0f3fa2014-06-01 10:26:23 +0000628ifeq ($(CONFIG_ATAVIA), yes)
629FEATURE_CFLAGS += -D'CONFIG_ATAVIA=1'
630PROGRAMMER_OBJS += atavia.o
631NEED_PCI := yes
632endif
633
Joseph C. Lehnerc2644a32016-01-16 23:45:25 +0000634ifeq ($(CONFIG_ATAPROMISE), yes)
635FEATURE_CFLAGS += -D'CONFIG_ATAPROMISE=1'
636PROGRAMMER_OBJS += atapromise.o
637NEED_PCI := yes
638endif
639
Kyösti Mälkki72d42f82014-06-01 23:48:31 +0000640ifeq ($(CONFIG_IT8212), yes)
641FEATURE_CFLAGS += -D'CONFIG_IT8212=1'
642PROGRAMMER_OBJS += it8212.o
643NEED_PCI := yes
644endif
645
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000646ifeq ($(CONFIG_FT2232_SPI), yes)
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000647# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000648FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_FT2232_SPI=1'")
James Lairdc60de0e2013-03-27 13:00:23 +0000649NEED_FTDI := yes
650PROGRAMMER_OBJS += ft2232_spi.o
651endif
652
653ifeq ($(CONFIG_USBBLASTER_SPI), yes)
654# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000655FEATURE_CFLAGS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'CONFIG_USBBLASTER_SPI=1'")
James Lairdc60de0e2013-03-27 13:00:23 +0000656NEED_FTDI := yes
657PROGRAMMER_OBJS += usbblaster_spi.o
658endif
659
Justin Chevrier66e554b2015-02-08 21:58:10 +0000660ifeq ($(CONFIG_PICKIT2_SPI), yes)
661FEATURE_CFLAGS += -D'CONFIG_PICKIT2_SPI=1'
662PROGRAMMER_OBJS += pickit2_spi.o
663NEED_USB := yes
664endif
665
James Lairdc60de0e2013-03-27 13:00:23 +0000666ifeq ($(NEED_FTDI), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000667FTDILIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libftdi1 || $(PKG_CONFIG) --libs libftdi || printf "%s" "-lftdi -lusb")
668FEATURE_CFLAGS += $(call debug_shell,grep -q "FT232H := yes" .features && printf "%s" "-D'HAVE_FT232H=1'")
669FTDI_INCLUDES := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --cflags-only-I libftdi1)
Alexandru Gagniuc3d06abe2015-12-25 22:42:45 +0000670FEATURE_CFLAGS += $(FTDI_INCLUDES)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000671FEATURE_LIBS += $(call debug_shell,grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)")
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000672# We can't set NEED_USB here because that would transform libftdi auto-enabling
673# into a hard requirement for libusb, defeating the purpose of auto-enabling.
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000674endif
675
676ifeq ($(CONFIG_DUMMY), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000677FEATURE_CFLAGS += -D'CONFIG_DUMMY=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000678PROGRAMMER_OBJS += dummyflasher.o
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000679endif
680
681ifeq ($(CONFIG_DRKAISER), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000682FEATURE_CFLAGS += -D'CONFIG_DRKAISER=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000683PROGRAMMER_OBJS += drkaiser.o
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000684NEED_PCI := yes
Carl-Daniel Hailfinger4740c6f2009-09-16 10:09:21 +0000685endif
Carl-Daniel Hailfinger6be74112009-08-12 16:17:41 +0000686
Joerg Fischer5665ef32010-05-21 21:54:07 +0000687ifeq ($(CONFIG_NICREALTEK), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000688FEATURE_CFLAGS += -D'CONFIG_NICREALTEK=1'
Joerg Fischer5665ef32010-05-21 21:54:07 +0000689PROGRAMMER_OBJS += nicrealtek.o
690NEED_PCI := yes
691endif
692
Andrew Morganc29c2e72010-06-07 22:37:54 +0000693ifeq ($(CONFIG_NICNATSEMI), yes)
694FEATURE_CFLAGS += -D'CONFIG_NICNATSEMI=1'
695PROGRAMMER_OBJS += nicnatsemi.o
696NEED_PCI := yes
697endif
698
Carl-Daniel Hailfingerb713d2e2011-05-08 00:24:18 +0000699ifeq ($(CONFIG_NICINTEL), yes)
700FEATURE_CFLAGS += -D'CONFIG_NICINTEL=1'
701PROGRAMMER_OBJS += nicintel.o
702NEED_PCI := yes
703endif
704
Idwer Vollering004f4b72010-09-03 18:21:21 +0000705ifeq ($(CONFIG_NICINTEL_SPI), yes)
706FEATURE_CFLAGS += -D'CONFIG_NICINTEL_SPI=1'
707PROGRAMMER_OBJS += nicintel_spi.o
708NEED_PCI := yes
709endif
710
Ricardo Ribalda Delgado2a41f0a2014-07-28 20:35:21 +0000711ifeq ($(CONFIG_NICINTEL_EEPROM), yes)
712FEATURE_CFLAGS += -D'CONFIG_NICINTEL_EEPROM=1'
713PROGRAMMER_OBJS += nicintel_eeprom.o
714NEED_PCI := yes
715endif
716
Mark Marshall90021f22010-12-03 14:48:11 +0000717ifeq ($(CONFIG_OGP_SPI), yes)
718FEATURE_CFLAGS += -D'CONFIG_OGP_SPI=1'
719PROGRAMMER_OBJS += ogp_spi.o
720NEED_PCI := yes
721endif
722
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000723ifeq ($(CONFIG_BUSPIRATE_SPI), yes)
724FEATURE_CFLAGS += -D'CONFIG_BUSPIRATE_SPI=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000725PROGRAMMER_OBJS += buspirate_spi.o
Carl-Daniel Hailfinger5bdf2982010-06-14 12:42:05 +0000726NEED_SERIAL := yes
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000727endif
728
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000729ifeq ($(CONFIG_DEDIPROG), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000730FEATURE_CFLAGS += -D'CONFIG_DEDIPROG=1'
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000731PROGRAMMER_OBJS += dediprog.o
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000732NEED_USB := yes
Carl-Daniel Hailfingerd38fac82010-01-19 11:15:48 +0000733endif
734
Carl-Daniel Hailfinger9a1105c2011-02-04 21:37:59 +0000735ifeq ($(CONFIG_SATAMV), yes)
736FEATURE_CFLAGS += -D'CONFIG_SATAMV=1'
737PROGRAMMER_OBJS += satamv.o
738NEED_PCI := yes
739endif
740
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000741ifeq ($(CONFIG_LINUX_SPI), yes)
Stefan Tauner8868db32012-03-13 00:18:19 +0000742# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000743FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_SPI_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_LINUX_SPI=1'")
Carl-Daniel Hailfinger8541d232012-02-16 21:00:27 +0000744PROGRAMMER_OBJS += linux_spi.o
745endif
746
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000747ifeq ($(CONFIG_MSTARDDC_SPI), yes)
748# This is a totally ugly hack.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000749FEATURE_CFLAGS += $(call debug_shell,grep -q "LINUX_I2C_SUPPORT := yes" .features && printf "%s" "-D'CONFIG_MSTARDDC_SPI=1'")
Alexandre Boeglin80e64712014-12-20 20:25:19 +0000750NEED_LINUX_I2C := yes
751PROGRAMMER_OBJS += mstarddc_spi.o
752endif
753
Carl-Daniel Hailfinger5bdf2982010-06-14 12:42:05 +0000754ifeq ($(NEED_SERIAL), yes)
Sean Nelson5d134642009-12-24 16:54:21 +0000755LIB_OBJS += serial.o
Carl-Daniel Hailfinger5bdf2982010-06-14 12:42:05 +0000756endif
757
758ifeq ($(NEED_NET), yes)
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000759ifeq ($(TARGET_OS), SunOS)
Carl-Daniel Hailfinger5bdf2982010-06-14 12:42:05 +0000760LIBS += -lsocket
Carl-Daniel Hailfinger5cca01f2009-11-24 00:20:03 +0000761endif
Carl-Daniel Hailfingere51ea102009-11-23 19:20:11 +0000762endif
763
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000764ifeq ($(NEED_PCI), yes)
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000765CHECK_LIBPCI = yes
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000766FEATURE_CFLAGS += -D'NEED_PCI=1'
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000767FEATURE_CFLAGS += $(call debug_shell,grep -q "OLD_PCI_GET_DEV := yes" .libdeps && printf "%s" "-D'OLD_PCI_GET_DEV=1'")
Stefan Tauner56734502015-02-08 21:58:04 +0000768
Carl-Daniel Hailfingerfb0828f2010-02-12 19:35:25 +0000769PROGRAMMER_OBJS += pcidev.o physmap.o hwaccess.o
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000770ifeq ($(TARGET_OS), NetBSD)
Carl-Daniel Hailfinger460b2822010-06-04 23:24:57 +0000771# The libpci we want is called libpciutils on NetBSD and needs NetBSD libpci.
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000772PCILIBS += -lpciutils -lpci
Carl-Daniel Hailfinger460b2822010-06-04 23:24:57 +0000773# For (i386|x86_64)_iopl(2).
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000774PCILIBS += -l$(shell uname -p)
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000775else
Stefan Taunerbe62d3f2015-01-10 09:32:44 +0000776
Stefan Tauner449abe22013-09-11 23:34:57 +0000777PCILIBS += -lpci
Stefan Taunerbe62d3f2015-01-10 09:32:44 +0000778
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000779ifeq ($(TARGET_OS), OpenBSD)
Carl-Daniel Hailfingerb63b0672010-07-02 17:12:50 +0000780# For (i386|amd64)_iopl(2).
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000781PCILIBS += -l$(shell uname -m)
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000782else
783ifeq ($(TARGET_OS), Darwin)
784# DirectHW framework can be found in the DirectHW library.
Stefan Taunere34e3e82013-01-01 00:06:51 +0000785PCILIBS += -framework IOKit -framework DirectHW
Carl-Daniel Hailfingerb63b0672010-07-02 17:12:50 +0000786endif
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000787endif
Jonathan A. Kollasch3646c8f2010-01-08 21:18:08 +0000788endif
Carl-Daniel Hailfinger66ef4e52009-12-13 22:28:00 +0000789endif
790
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000791ifeq ($(NEED_USB), yes)
792CHECK_LIBUSB0 = yes
793FEATURE_CFLAGS += -D'NEED_USB=1'
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000794USBLIBS := $(call debug_shell,[ -n "$(PKG_CONFIG_LIBDIR)" ] && export PKG_CONFIG_LIBDIR="$(PKG_CONFIG_LIBDIR)" ; $(PKG_CONFIG) --libs libusb || printf "%s" "-lusb")
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000795endif
796
Carl-Daniel Hailfinger9c8476b2009-09-16 12:19:03 +0000797ifeq ($(CONFIG_PRINT_WIKI), yes)
Carl-Daniel Hailfinger71127722010-05-31 15:27:27 +0000798FEATURE_CFLAGS += -D'CONFIG_PRINT_WIKI=1'
Sean Nelson5d134642009-12-24 16:54:21 +0000799CLI_OBJS += print_wiki.o
Carl-Daniel Hailfinger9c8476b2009-09-16 12:19:03 +0000800endif
801
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000802FEATURE_CFLAGS += $(call debug_shell,grep -q "UTSNAME := yes" .features && printf "%s" "-D'HAVE_UTSNAME=1'")
Carl-Daniel Hailfinger132e2ec2010-03-27 16:36:40 +0000803
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +0000804# We could use PULLED_IN_LIBS, but that would be ugly.
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000805FEATURE_LIBS += $(call debug_shell,grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz")
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +0000806
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000807LIBFLASHROM_OBJS = $(CHIP_OBJS) $(PROGRAMMER_OBJS) $(LIB_OBJS)
Stefan Taunerd94d25d2012-07-28 03:17:15 +0000808OBJS = $(CLI_OBJS) $(LIBFLASHROM_OBJS)
Sean Nelson5d134642009-12-24 16:54:21 +0000809
Joerg Mayera93d9dc2013-08-29 00:38:19 +0000810all: hwlibs features $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000811ifeq ($(ARCH), x86)
812 @+$(MAKE) -C util/ich_descriptors_tool/ TARGET_OS=$(TARGET_OS) EXEC_SUFFIX=$(EXEC_SUFFIX)
813endif
814
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +0000815$(PROGRAM)$(EXEC_SUFFIX): $(OBJS)
Carl-Daniel Hailfinger11990da2013-07-13 23:21:05 +0000816 $(CC) $(LDFLAGS) -o $(PROGRAM)$(EXEC_SUFFIX) $(OBJS) $(LIBS) $(PCILIBS) $(FEATURE_LIBS) $(USBLIBS)
Ronald G. Minnich5e5f75e2002-01-29 18:21:41 +0000817
Patrick Georgi97bc95c2011-03-08 07:17:44 +0000818libflashrom.a: $(LIBFLASHROM_OBJS)
819 $(AR) rcs $@ $^
820 $(RANLIB) $@
821
Carl-Daniel Hailfinger8ef7dce2009-07-10 20:19:48 +0000822# TAROPTIONS reduces information leakage from the packager's system.
823# If other tar programs support command line arguments for setting uid/gid of
824# stored files, they can be handled here as well.
825TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root")
Carl-Daniel Hailfingerb18ecbc2009-06-19 14:20:34 +0000826
Paul Fox05dfbe62009-06-16 21:08:06 +0000827%.o: %.c .features
Carl-Daniel Hailfingera8da2242012-08-15 23:06:32 +0000828 $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SVNDEF) -o $@ -c $<
Clark Rawlins02016f72008-02-14 23:22:20 +0000829
Carl-Daniel Hailfingera0020df2010-05-30 22:35:14 +0000830# Make sure to add all names of generated binaries here.
831# This includes all frontends and libflashrom.
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +0000832# We don't use EXEC_SUFFIX here because we want to clean everything.
Ronald G. Minnich5e5f75e2002-01-29 18:21:41 +0000833clean:
Stefan Tauner4c723152016-01-14 22:47:55 +0000834 rm -f $(PROGRAM) $(PROGRAM).exe libflashrom.a *.o *.d $(PROGRAM).8 $(PROGRAM).8.html $(BUILD_DETAILS_FILE)
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000835 @+$(MAKE) -C util/ich_descriptors_tool/ clean
Ronald G. Minnicheaab50b2003-09-12 22:41:53 +0000836
Ollie Lho184a4042005-11-26 21:55:36 +0000837distclean: clean
Stefan Reinauere2f01582010-06-07 11:08:07 +0000838 rm -f .features .libdeps
Christian Ruppertdb9d9f42009-05-14 14:17:07 +0000839
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +0000840strip: $(PROGRAM)$(EXEC_SUFFIX)
841 $(STRIP) $(STRIP_ARGS) $(PROGRAM)$(EXEC_SUFFIX)
Ronald G. Minnicheaab50b2003-09-12 22:41:53 +0000842
Stefan Tauner56787082011-08-18 02:27:19 +0000843# to define test programs we use verbatim variables, which get exported
844# to environment variables and are referenced with $$<varname> later
845
846define COMPILER_TEST
847int main(int argc, char **argv)
848{
849 (void) argc;
850 (void) argv;
851 return 0;
852}
853endef
854export COMPILER_TEST
855
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000856compiler: featuresavailable
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000857 @printf "Checking for a C compiler... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +0000858 @echo "$$COMPILER_TEST" > .test.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000859 @{ { { { { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .test.c -o .test$(EXEC_SUFFIX) >&2 && \
860 echo "found." || { echo "not found."; \
861 rm -f .test.c .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +0000862 @rm -f .test.c .test$(EXEC_SUFFIX)
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000863 @printf "Target arch is "
Carl-Daniel Hailfinger91199a12011-07-07 06:59:18 +0000864 @# FreeBSD wc will output extraneous whitespace.
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000865 @echo $(ARCH)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \
Carl-Daniel Hailfinger91199a12011-07-07 06:59:18 +0000866 ( echo "unknown. Aborting."; exit 1)
867 @printf "%s\n" '$(ARCH)'
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +0000868 @printf "Target OS is "
869 @# FreeBSD wc will output extraneous whitespace.
870 @echo $(TARGET_OS)|wc -w|grep -q '^[[:blank:]]*1[[:blank:]]*$$' || \
871 ( echo "unknown. Aborting."; exit 1)
872 @printf "%s\n" '$(TARGET_OS)'
Stefan Taunerd6c17f62013-09-12 14:04:31 +0000873ifeq ($(TARGET_OS), libpayload)
874 @$(CC) --version 2>&1 | grep -q coreboot || \
875 ( echo "Warning: It seems you are not using coreboot's reference compiler."; \
876 echo "This might work but usually does not, please beware." )
877endif
Carl-Daniel Hailfinger4cb7a962009-06-16 09:31:51 +0000878
Stefan Tauner56787082011-08-18 02:27:19 +0000879define LIBPCI_TEST
880/* Avoid a failing test due to libpci header symbol shadowing breakage */
881#define index shadow_workaround_index
Stefan Tauner8d21ff12015-01-10 09:33:06 +0000882#if !defined __NetBSD__
Stefan Tauner56787082011-08-18 02:27:19 +0000883#include <pci/pci.h>
Stefan Taunerc65b8552013-09-12 15:48:39 +0000884#else
885#include <pciutils/pci.h>
886#endif
Stefan Tauner56787082011-08-18 02:27:19 +0000887struct pci_access *pacc;
888int main(int argc, char **argv)
889{
890 (void) argc;
891 (void) argv;
892 pacc = pci_alloc();
893 return 0;
894}
895endef
896export LIBPCI_TEST
897
Stefan Tauner56734502015-02-08 21:58:04 +0000898define PCI_GET_DEV_TEST
899/* Avoid a failing test due to libpci header symbol shadowing breakage */
900#define index shadow_workaround_index
901#if !defined __NetBSD__
902#include <pci/pci.h>
903#else
904#include <pciutils/pci.h>
905#endif
906struct pci_access *pacc;
907struct pci_dev *dev = {0};
908int main(int argc, char **argv)
909{
910 (void) argc;
911 (void) argv;
912 pacc = pci_alloc();
913 dev = pci_get_dev(pacc, dev->domain, dev->bus, dev->dev, 1);
914 return 0;
915}
916endef
917export PCI_GET_DEV_TEST
918
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000919define LIBUSB0_TEST
Stefan Tauner0cbd8c22015-01-26 22:06:04 +0000920#include "platform.h"
921#if IS_WINDOWS
922#include <lusb0_usb.h>
923#else
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000924#include <usb.h>
Stefan Tauner0cbd8c22015-01-26 22:06:04 +0000925#endif
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000926int main(int argc, char **argv)
927{
928 (void) argc;
929 (void) argv;
930 usb_init();
931 return 0;
932}
933endef
934export LIBUSB0_TEST
935
936hwlibs: compiler
937 @printf "" > .libdeps
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +0000938ifeq ($(CHECK_LIBPCI), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000939 @printf "Checking for libpci headers... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +0000940 @echo "$$LIBPCI_TEST" > .test.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000941 @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
942 echo "found." || { echo "not found."; echo; \
943 echo "Please install libpci headers."; \
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +0000944 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000945 rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
946 @printf "Checking version of pci_get_dev... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56734502015-02-08 21:58:04 +0000947 @echo "$$PCI_GET_DEV_TEST" > .test.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000948 @ { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
Stefan Tauner56734502015-02-08 21:58:04 +0000949 ( echo "new version (including PCI domain parameter)."; echo "OLD_PCI_GET_DEV := no" >> .libdeps ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000950 ( echo "old version (without PCI domain parameter)."; echo "OLD_PCI_GET_DEV := yes" >> .libdeps ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
951 @printf "Checking if libpci is present and sufficient... " | tee -a $(BUILD_DETAILS_FILE)
952 @{ { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) 2>>$(BUILD_DETAILS_FILE) >&2 && \
953 echo "yes." || { echo "no."; \
954 printf "Checking if libz+libpci are present and sufficient..." ; \
955 { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(PCILIBS) -lz >&2 && \
956 echo "yes." && echo "NEEDLIBZ := yes" > .libdeps } || { echo "no."; echo; \
Carl-Daniel Hailfinger9979eac2010-03-22 12:29:45 +0000957 echo "Please install libpci (package pciutils) and/or libz."; \
Carl-Daniel Hailfingera472b8b2009-10-03 17:08:02 +0000958 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000959 rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +0000960 @rm -f .test.c .test.o .test$(EXEC_SUFFIX)
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000961endif
962ifeq ($(CHECK_LIBUSB0), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000963 @printf "Checking for libusb-0.1/libusb-compat headers... " | tee -a $(BUILD_DETAILS_FILE)
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000964 @echo "$$LIBUSB0_TEST" > .test.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000965 @{ { { { { $(CC) -c $(CPPFLAGS) $(CFLAGS) .test.c -o .test.o >&2 && \
966 echo "found." || { echo "not found."; echo; \
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000967 echo "Please install libusb-0.1 headers or libusb-compat headers."; \
968 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000969 rm -f .test.c .test.o; exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
970 @printf "Checking if libusb-0.1 is usable... " | tee -a $(BUILD_DETAILS_FILE)
971 @{ { { { { $(CC) $(LDFLAGS) .test.o -o .test$(EXEC_SUFFIX) $(LIBS) $(USBLIBS) >&2 && \
972 echo "yes." || { echo "no."; \
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000973 echo "Please install libusb-0.1 or libusb-compat."; \
974 echo "See README for more information."; echo; \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +0000975 rm -f .test.c .test.o .test$(EXEC_SUFFIX); exit 1; }; } 2>>$(BUILD_DETAILS_FILE); echo $? >&3 ; } | tee -a $(BUILD_DETAILS_FILE) >&4; } 3>&1;} | { read rc ; exit ${rc}; } } 4>&1
Carl-Daniel Hailfingere7a39bf2012-11-20 21:06:16 +0000976 @rm -f .test.c .test.o .test$(EXEC_SUFFIX)
Carl-Daniel Hailfinger8a59ff02009-12-24 03:33:11 +0000977endif
Stefan Reinauer53e96252005-12-01 16:19:24 +0000978
Carl-Daniel Hailfingerb18ecbc2009-06-19 14:20:34 +0000979.features: features
980
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000981# If a user does not explicitly request a non-working feature, we should
982# silently disable it. However, if a non-working (does not compile) feature
983# is explicitly requested, we should bail out with a descriptive error message.
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000984# We also have to check that at least one programmer driver is enabled.
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000985featuresavailable:
Carl-Daniel Hailfinger60d9bd22012-08-09 23:34:41 +0000986ifeq ($(PROGRAMMER_OBJS),)
987 @echo "You have to enable at least one programmer driver!"
988 @false
989endif
990ifneq ($(UNSUPPORTED_FEATURES), )
Carl-Daniel Hailfinger5d3fcb92010-06-14 18:40:59 +0000991 @echo "The following features are unavailable on your machine: $(UNSUPPORTED_FEATURES)"
992 @false
993endif
994
Stefan Tauner56787082011-08-18 02:27:19 +0000995define FTDI_TEST
Stefan Tauner5c316f92015-02-08 21:57:52 +0000996#include <stdlib.h>
Stefan Tauner56787082011-08-18 02:27:19 +0000997#include <ftdi.h>
998struct ftdi_context *ftdic = NULL;
999int main(int argc, char **argv)
1000{
1001 (void) argc;
1002 (void) argv;
1003 return ftdi_init(ftdic);
1004}
1005endef
1006export FTDI_TEST
1007
Ilya A. Volynets-Evenbakh2c714ab2012-09-26 00:47:09 +00001008define FTDI_232H_TEST
1009#include <ftdi.h>
1010enum ftdi_chip_type type = TYPE_232H;
1011endef
1012export FTDI_232H_TEST
1013
Stefan Tauner56787082011-08-18 02:27:19 +00001014define UTSNAME_TEST
1015#include <sys/utsname.h>
1016struct utsname osinfo;
1017int main(int argc, char **argv)
1018{
1019 (void) argc;
1020 (void) argv;
1021 uname (&osinfo);
1022 return 0;
1023}
1024endef
1025export UTSNAME_TEST
1026
Stefan Tauner8868db32012-03-13 00:18:19 +00001027define LINUX_SPI_TEST
1028#include <linux/types.h>
1029#include <linux/spi/spidev.h>
1030
1031int main(int argc, char **argv)
1032{
1033 (void) argc;
1034 (void) argv;
1035 return 0;
1036}
1037endef
1038export LINUX_SPI_TEST
1039
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001040define LINUX_I2C_TEST
1041#include <linux/i2c-dev.h>
1042#include <linux/i2c.h>
1043
1044int main(int argc, char **argv)
1045{
1046 (void) argc;
1047 (void) argv;
1048 return 0;
1049}
1050endef
1051export LINUX_I2C_TEST
1052
Carl-Daniel Hailfingerb18ecbc2009-06-19 14:20:34 +00001053features: compiler
1054 @echo "FEATURES := yes" > .features.tmp
James Lairdc60de0e2013-03-27 13:00:23 +00001055ifeq ($(NEED_FTDI), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001056 @printf "Checking for FTDI support... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001057 @echo "$$FTDI_TEST" > .featuretest.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001058 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
1059 ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ; \
1060 printf "Checking for FT232H support in libftdi... " ; \
1061 echo "$$FTDI_232H_TEST" >> .featuretest.c ; \
1062 { $(CC) $(CPPFLAGS) $(CFLAGS) $(FTDI_INCLUDES) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) $(FTDILIBS) $(LIBS) >&2 && \
1063 ( echo "found."; echo "FT232H := yes" >> .features.tmp ) || \
1064 ( echo "not found."; echo "FT232H := no" >> .features.tmp ) } \
1065 ) || \
1066 ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) } \
1067 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Carl-Daniel Hailfinger8a59ff02009-12-24 03:33:11 +00001068endif
Stefan Tauner8868db32012-03-13 00:18:19 +00001069ifeq ($(CONFIG_LINUX_SPI), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001070 @printf "Checking if Linux SPI headers are present... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner8868db32012-03-13 00:18:19 +00001071 @echo "$$LINUX_SPI_TEST" > .featuretest.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001072 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
Stefan Tauner8868db32012-03-13 00:18:19 +00001073 ( echo "yes."; echo "LINUX_SPI_SUPPORT := yes" >> .features.tmp ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001074 ( echo "no."; echo "LINUX_SPI_SUPPORT := no" >> .features.tmp ) } \
1075 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner8868db32012-03-13 00:18:19 +00001076endif
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001077ifeq ($(NEED_LINUX_I2C), yes)
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001078 @printf "Checking if Linux I2C headers are present... " | tee -a $(BUILD_DETAILS_FILE)
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001079 @echo "$$LINUX_I2C_TEST" > .featuretest.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001080 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001081 ( echo "yes."; echo "LINUX_I2C_SUPPORT := yes" >> .features.tmp ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001082 ( echo "no."; echo "LINUX_I2C_SUPPORT := no" >> .features.tmp ) } \
1083 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Alexandre Boeglin80e64712014-12-20 20:25:19 +00001084endif
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001085 @printf "Checking for utsname support... " | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001086 @echo "$$UTSNAME_TEST" > .featuretest.c
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001087 @ { $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest$(EXEC_SUFFIX) >&2 && \
Stefan Tauner56787082011-08-18 02:27:19 +00001088 ( echo "found."; echo "UTSNAME := yes" >> .features.tmp ) || \
Stefan Tauner3f73ffe2016-01-07 17:45:59 +00001089 ( echo "not found."; echo "UTSNAME := no" >> .features.tmp ) } 2>>$(BUILD_DETAILS_FILE) | tee -a $(BUILD_DETAILS_FILE)
Stefan Tauner56787082011-08-18 02:27:19 +00001090 @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features
1091 @rm -f .featuretest.c .featuretest$(EXEC_SUFFIX)
Paul Fox05dfbe62009-06-16 21:08:06 +00001092
Stefan Tauner4c723152016-01-14 22:47:55 +00001093$(PROGRAM).8.html: $(PROGRAM).8
1094 @groff -mandoc -Thtml $< >$@
1095
Joerg Mayera93d9dc2013-08-29 00:38:19 +00001096$(PROGRAM).8: $(PROGRAM).8.tmpl
Stefan Tauner4c723152016-01-14 22:47:55 +00001097 @# Add the man page change date and version to the man page
1098 @sed -e 's#.TH FLASHROM 8 ".*".*#.TH FLASHROM 8 "$(shell ./util/getrevision.sh -d $(PROGRAM).8.tmpl 2>/dev/null)" "$(VERSION)"#' <$< >$@
Joerg Mayera93d9dc2013-08-29 00:38:19 +00001099
1100install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8
Uwe Hermannc2a9c9c2009-05-14 14:51:14 +00001101 mkdir -p $(DESTDIR)$(PREFIX)/sbin
Uwe Hermann56b2cb02009-05-21 15:59:58 +00001102 mkdir -p $(DESTDIR)$(MANDIR)/man8
Carl-Daniel Hailfingerddbab712010-06-14 14:44:08 +00001103 $(INSTALL) -m 0755 $(PROGRAM)$(EXEC_SUFFIX) $(DESTDIR)$(PREFIX)/sbin
Uwe Hermann56b2cb02009-05-21 15:59:58 +00001104 $(INSTALL) -m 0644 $(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8
Uwe Hermannc113b572006-12-14 00:59:41 +00001105
Joerg Mayera93d9dc2013-08-29 00:38:19 +00001106export: $(PROGRAM).8
Carl-Daniel Hailfinger48e5e092009-08-31 16:25:08 +00001107 @rm -rf $(EXPORTDIR)/flashrom-$(RELEASENAME)
1108 @svn export -r BASE . $(EXPORTDIR)/flashrom-$(RELEASENAME)
1109 @sed "s/^SVNVERSION.*/SVNVERSION := $(SVNVERSION)/" Makefile >$(EXPORTDIR)/flashrom-$(RELEASENAME)/Makefile
Joerg Mayera93d9dc2013-08-29 00:38:19 +00001110 @cp $(PROGRAM).8 "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$(PROGRAM).8"
Stefan Tauner1ca7c7f2016-01-14 23:05:55 +00001111 @svn log >$(EXPORTDIR)/flashrom-$(RELEASENAME)/ChangeLog
Carl-Daniel Hailfinger48e5e092009-08-31 16:25:08 +00001112 @echo Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +00001113
1114tarball: export
Carl-Daniel Hailfinger48e5e092009-08-31 16:25:08 +00001115 @tar cjf $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2 -C $(EXPORTDIR)/ $(TAROPTIONS) flashrom-$(RELEASENAME)/
1116 @rm -rf $(EXPORTDIR)/flashrom-$(RELEASENAME)
1117 @echo Created $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2
Carl-Daniel Hailfingera23041c2009-06-12 14:49:10 +00001118
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +00001119djgpp-dos: clean
Carl-Daniel Hailfinger33a65a02011-12-20 00:51:44 +00001120 make CC=i586-pc-msdosdjgpp-gcc STRIP=i586-pc-msdosdjgpp-strip
1121libpayload: clean
1122 make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib
Carl-Daniel Hailfinger50415d22010-03-21 14:54:57 +00001123
Stefan Tauner74dc73f2015-03-01 22:04:38 +00001124.PHONY: all install clean distclean compiler hwlibs features export tarball djgpp-dos featuresavailable libpayload
Ollie Lho184a4042005-11-26 21:55:36 +00001125
Stefan Tauner23e10b82016-01-23 16:16:49 +00001126# Disable implicit suffixes and built-in rules (for performance and profit)
1127.SUFFIXES:
1128
Stefan Reinauere2f01582010-06-07 11:08:07 +00001129-include $(OBJS:.o=.d)