Add a bunch of new/tested stuff and various small changes 25
Tested mainboards:
OK:
- ASRock Fatal1ty 970 Performance and P4i65G
Reported by anonymous email message ID:
932677687262b1300eaf14260999d9262c31@guerrillamail.com
The latter actually had a tested board enable already.
Flash chips:
- Eon EN25Q128 to PREW (+PREW)
Reported by Adrian Graham
- GigaDevice GD25VQ41B to PREW (+PREW)
Reported by David Hendricks
- Winbond W39V040FB to PREW (+EW)
Reported by fjed on IRC
Miscellaneous:
- Change PCI IDs of "MS-6577 (Xenon)" board enable.
The previous IDs contained the on-board display adapter which is
disabled when a dedicated graphics card is installed.
- Add a note to the README how to overcome the clang warning if only a
single programmer is enabled.
- Fix some typo and manpage problems found by lintian
- r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG).
This patch corrects that.
- Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable.
Previous PCI IDs were board-specific but ot the other of devices
that could be disabled by the firmware or that vary among
hardware revions. There are no good alternatives available.
However, since we always have a DMI decoder available now, we can
use non-board-specific devices without taking risks. Thanks to
Uwe Hermann for reporting and testing.
- Some other small changes to clean up whitespace and fix some warnings
from Debian's lintian.
Corresponding to flashrom svn r1951.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/Makefile b/Makefile
index f94ec7b..1a446f0 100644
--- a/Makefile
+++ b/Makefile
@@ -314,7 +314,7 @@
else
override CONFIG_PONY_SPI = no
endif
-# Dediprog, USB-Blaster, PICkit2, CH341A and FT2232 are not supported with libpayload (missing libusb support)
+# Dediprog, USB-Blaster, PICkit2, CH341A and FT2232 are not supported with libpayload (missing libusb support).
ifeq ($(CONFIG_DEDIPROG), yes)
UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes
else
@@ -661,22 +661,22 @@
override CONFIG_DEDIPROG = no
endif
ifeq ($(CONFIG_ENABLE_LIBPCI_PROGRAMMERS), no)
-override CONFIG_INTERNAL = no
-override CONFIG_NIC3COM = no
-override CONFIG_GFXNVIDIA = no
-override CONFIG_SATASII = no
-override CONFIG_ATAHPT = no
-override CONFIG_ATAVIA = no
-override CONFIG_ATAPROMISE = no
-override CONFIG_IT8212 = no
-override CONFIG_DRKAISER = no
-override CONFIG_NICREALTEK = no
-override CONFIG_NICNATSEMI = no
-override CONFIG_NICINTEL = no
-override CONFIG_NICINTEL_SPI = no
-override CONFIG_NICINTEL_EEPROM = no
-override CONFIG_OGP_SPI = no
-override CONFIG_SATAMV = no
+override CONFIG_INTERNAL = no
+override CONFIG_NIC3COM = no
+override CONFIG_GFXNVIDIA = no
+override CONFIG_SATASII = no
+override CONFIG_ATAHPT = no
+override CONFIG_ATAVIA = no
+override CONFIG_ATAPROMISE = no
+override CONFIG_IT8212 = no
+override CONFIG_DRKAISER = no
+override CONFIG_NICREALTEK = no
+override CONFIG_NICNATSEMI = no
+override CONFIG_NICINTEL = no
+override CONFIG_NICINTEL_SPI = no
+override CONFIG_NICINTEL_EEPROM = no
+override CONFIG_OGP_SPI = no
+override CONFIG_SATAMV = no
endif
# Bitbanging SPI infrastructure, default off unless needed.