blob: 4278b6d3ae7a2e89b38a9818b98b38b9ab826568 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2005-2007 coresystems GmbH <stepan@coresystems.de>
* Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2007-2009 Luc Verhaegen <libv@skynet.be>
* Copyright (C) 2007 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the board specific flash enables.
*/
#include <string.h>
#include <fcntl.h>
#include "flash.h"
/*
* Helper functions for many Winbond Super I/Os of the W836xx range.
*/
/* Enter extended functions */
void w836xx_ext_enter(uint16_t port)
{
OUTB(0x87, port);
OUTB(0x87, port);
}
/* Leave extended functions */
void w836xx_ext_leave(uint16_t port)
{
OUTB(0xAA, port);
}
/* Generic Super I/O helper functions */
uint8_t sio_read(uint16_t port, uint8_t reg)
{
OUTB(reg, port);
return INB(port + 1);
}
void sio_write(uint16_t port, uint8_t reg, uint8_t data)
{
OUTB(reg, port);
OUTB(data, port + 1);
}
void sio_mask(uint16_t port, uint8_t reg, uint8_t data, uint8_t mask)
{
uint8_t tmp;
OUTB(reg, port);
tmp = INB(port + 1) & ~mask;
OUTB(tmp | (data & mask), port + 1);
}
/* Not used yet. */
#if 0
static int enable_flash_decode_superio(void)
{
int ret;
uint8_t tmp;
switch (superio.vendor) {
case SUPERIO_VENDOR_NONE:
ret = -1;
break;
case SUPERIO_VENDOR_ITE:
enter_conf_mode_ite(superio.port);
/* Enable flash mapping. Works for most old ITE style SuperI/O. */
tmp = sio_read(superio.port, 0x24);
tmp |= 0xfc;
sio_write(superio.port, 0x24, tmp);
exit_conf_mode_ite(superio.port);
ret = 0;
break;
default:
printf_debug("Unhandled SuperI/O type!\n");
ret = -1;
break;
}
return ret;
}
#endif
/**
* Winbond W83627HF: Raise GPIO24.
*
* Suited for:
* - Agami Aruma
* - IWILL DK8-HTX
*/
static int w83627hf_gpio24_raise(uint16_t port, const char *name)
{
w836xx_ext_enter(port);
/* Is this the W83627HF? */
if (sio_read(port, 0x20) != 0x52) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
name, sio_read(port, 0x20));
w836xx_ext_leave(port);
return -1;
}
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
sio_mask(port, 0x2B, 0x10, 0x10);
/* Select logical device 8: GPIO port 2 */
sio_write(port, 0x07, 0x08);
sio_mask(port, 0x30, 0x01, 0x01); /* Activate logical device. */
sio_mask(port, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
sio_mask(port, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
sio_mask(port, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
w836xx_ext_leave(port);
return 0;
}
static int w83627hf_gpio24_raise_2e(const char *name)
{
return w83627hf_gpio24_raise(0x2e, name);
}
/**
* Winbond W83627THF: GPIO 4, bit 4
*
* Suited for:
* - MSI K8T Neo2-F
* - MSI K8N-NEO3
*/
static int w83627thf_gpio4_4_raise(uint16_t port, const char *name)
{
w836xx_ext_enter(port);
/* Is this the W83627THF? */
if (sio_read(port, 0x20) != 0x82) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
name, sio_read(port, 0x20));
w836xx_ext_leave(port);
return -1;
}
/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
sio_write(port, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */
sio_mask(port, 0x30, 0x02, 0x02); /* Activate logical device. */
sio_mask(port, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
sio_mask(port, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
sio_mask(port, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
w836xx_ext_leave(port);
return 0;
}
static int w83627thf_gpio4_4_raise_2e(const char *name)
{
return w83627thf_gpio4_4_raise(0x2e, name);
}
static int w83627thf_gpio4_4_raise_4e(const char *name)
{
return w83627thf_gpio4_4_raise(0x4e, name);
}
/**
* w83627: Enable MEMW# and set ROM size to max.
*/
static void w836xx_memw_enable(uint16_t port)
{
w836xx_ext_enter(port);
if (!(sio_read(port, 0x24) & 0x02)) { /* Flash ROM enabled? */
/* Enable MEMW# and set ROM size select to max. (4M). */
sio_mask(port, 0x24, 0x28, 0x28);
}
w836xx_ext_leave(port);
}
/**
* Suited for:
* - EPoX EP-8K5A2: VIA KT333 + VT8235.
* - Albatron PM266A Pro: VIA P4M266A + VT8235.
* - Shuttle AK31 (all versions): VIA KT266 + VT8233.
* - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235
* - Tyan S2498 (Tomcat K7M): AMD Geode NX + VIA KM400 + VT8237.
*/
static int w836xx_memw_enable_2e(const char *name)
{
w836xx_memw_enable(0x2E);
return 0;
}
/**
*
*/
static int it8705f_write_enable(uint8_t port, const char *name)
{
enter_conf_mode_ite(port);
sio_mask(port, 0x24, 0x04, 0x04); /* Flash ROM I/F Writes Enable */
exit_conf_mode_ite(port);
return 0;
}
/**
* Suited for:
* - AOpen vKM400Am-S: VIA KM400 + VT8237 + IT8705F.
* - Biostar P4M80-M4: VIA P4M800 + VT8237 + IT8705AF
* - Elitegroup K7S6A: SiS745 + ITE IT8705F
* - Elitegroup K7VTA3: VIA Apollo KT266/A/333 + VIA VT8235 + ITE IT8705F
* - GIGABYTE GA-7VT600: VIA KT600 + VT8237 + IT8705
* - Shuttle AK38N: VIA KT333CF + VIA VT8235 + ITE IT8705F
*
* SIS950 superio probably requires the same flash write enable.
*/
static int it8705f_write_enable_2e(const char *name)
{
return it8705f_write_enable(0x2e, name);
}
/**
* VT823x: Set one of the GPIO pins.
*/
static int via_vt823x_gpio_set(uint8_t gpio, int raise)
{
struct pci_dev *dev;
uint16_t base;
uint8_t val, bit, offset;
dev = pci_dev_find_vendorclass(0x1106, 0x0601);
switch (dev->device_id) {
case 0x3177: /* VT8235 */
case 0x3227: /* VT8237R */
case 0x3337: /* VT8237A */
break;
default:
fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n");
return -1;
}
if ((gpio >= 12) && (gpio <= 15)) {
/* GPIO12-15 -> output */
val = pci_read_byte(dev, 0xE4);
val |= 0x10;
pci_write_byte(dev, 0xE4, val);
} else if (gpio == 9) {
/* GPIO9 -> Output */
val = pci_read_byte(dev, 0xE4);
val |= 0x20;
pci_write_byte(dev, 0xE4, val);
} else if (gpio == 5) {
val = pci_read_byte(dev, 0xE4);
val |= 0x01;
pci_write_byte(dev, 0xE4, val);
} else {
fprintf(stderr, "\nERROR: "
"VT823x GPIO%02d is not implemented.\n", gpio);
return -1;
}
/* We need the I/O Base Address for this board's flash enable. */
base = pci_read_word(dev, 0x88) & 0xff80;
offset = 0x4C + gpio / 8;
bit = 0x01 << (gpio % 8);
val = INB(base + offset);
if (raise)
val |= bit;
else
val &= ~bit;
OUTB(val, base + offset);
return 0;
}
/**
* Suited for Asus M2V-MX: VIA K8M890 + VT8237A + IT8716F
*/
static int via_vt823x_gpio5_raise(const char *name)
{
/* On M2V-MX: GPO5 is connected to WP# and TBL#. */
return via_vt823x_gpio_set(5, 1);
}
/**
* Suited for VIAs EPIA N & NL.
*/
static int via_vt823x_gpio9_raise(const char *name)
{
return via_vt823x_gpio_set(9, 1);
}
/**
* Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
*
* We don't need to do this for EPIA M when using coreboot, GPIO15 is never
* lowered there.
*/
static int via_vt823x_gpio15_raise(const char *name)
{
return via_vt823x_gpio_set(15, 1);
}
/**
* Winbond W83697HF Super I/O + VIA VT8235 southbridge
*
* Suited for:
* - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235
* - MSI KT4 Ultra: AMD K7 + VIA KT400 + VT8235
*/
static int board_msi_kt4v(const char *name)
{
int ret;
ret = via_vt823x_gpio_set(12, 1);
w836xx_memw_enable(0x2E);
return ret;
}
/**
* Suited for ASUS P5A.
*
* This is rather nasty code, but there's no way to do this cleanly.
* We're basically talking to some unknown device on SMBus, my guess
* is that it is the Winbond W83781D that lives near the DIP BIOS.
*/
static int board_asus_p5a(const char *name)
{
uint8_t tmp;
int i;
#define ASUSP5A_LOOP 5000
OUTB(0x00, 0xE807);
OUTB(0xEF, 0xE803);
OUTB(0xFF, 0xE800);
for (i = 0; i < ASUSP5A_LOOP; i++) {
OUTB(0xE1, 0xFF);
if (INB(0xE800) & 0x04)
break;
}
if (i == ASUSP5A_LOOP) {
printf("%s: Unable to contact device.\n", name);
return -1;
}
OUTB(0x20, 0xE801);
OUTB(0x20, 0xE1);
OUTB(0xFF, 0xE802);
for (i = 0; i < ASUSP5A_LOOP; i++) {
tmp = INB(0xE800);
if (tmp & 0x70)
break;
}
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) {
printf("%s: failed to read device.\n", name);
return -1;
}
tmp = INB(0xE804);
tmp &= ~0x02;
OUTB(0x00, 0xE807);
OUTB(0xEE, 0xE803);
OUTB(tmp, 0xE804);
OUTB(0xFF, 0xE800);
OUTB(0xE1, 0xFF);
OUTB(0x20, 0xE801);
OUTB(0x20, 0xE1);
OUTB(0xFF, 0xE802);
for (i = 0; i < ASUSP5A_LOOP; i++) {
tmp = INB(0xE800);
if (tmp & 0x70)
break;
}
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) {
printf("%s: failed to write to device.\n", name);
return -1;
}
return 0;
}
/*
* Set GPIO lines in the Broadcom HT-1000 southbridge.
*
* It's not a Super I/O but it uses the same index/data port method.
*/
static int board_hp_dl145_g3_enable(const char *name)
{
/* GPIO 0 reg from PM regs */
/* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */
sio_mask(0xcd6, 0x44, 0x24, 0x24);
return 0;
}
static int board_ibm_x3455(const char *name)
{
/* raise gpio13 */
sio_mask(0xcd6, 0x45, 0x20, 0x20);
return 0;
}
/**
* Suited for Shuttle FN25 (SN25P): AMD S939 + Nvidia CK804 (nForce4).
*/
static int board_shuttle_fn25(const char *name)
{
struct pci_dev *dev;
dev = pci_dev_find(0x10DE, 0x0050); /* NVIDIA CK804 ISA Bridge. */
if (!dev) {
fprintf(stderr,
"\nERROR: NVIDIA nForce4 ISA bridge not found.\n");
return -1;
}
/* one of those bits seems to be connected to TBL#, but -ENOINFO. */
pci_write_byte(dev, 0x92, 0);
return 0;
}
/**
* Very similar to AMD 8111 IO Hub.
*/
static int nvidia_mcp_gpio_set(int gpio, int raise)
{
struct pci_dev *dev;
uint16_t base;
uint8_t tmp;
if ((gpio < 0) || (gpio >= 0x40)) {
fprintf(stderr, "\nERROR: unsupported GPIO: %d.\n", gpio);
return -1;
}
/* First, check the ISA Bridge */
dev = pci_dev_find_vendorclass(0x10DE, 0x0601);
switch (dev->device_id) {
case 0x0030: /* CK804 */
case 0x0050: /* MCP04 */
case 0x0060: /* MCP2 */
break;
default:
/* Newer MCPs use the SMBus Controller */
dev = pci_dev_find_vendorclass(0x10DE, 0x0C05);
switch (dev->device_id) {
case 0x0264: /* MCP51 */
break;
default:
fprintf(stderr,
"\nERROR: no nVidia LPC/SMBus controller found.\n");
return -1;
}
break;
}
base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */
base += 0xC0;
tmp = INB(base + gpio);
tmp &= ~0x0F; /* null lower nibble */
tmp |= 0x04; /* gpio -> output. */
if (raise)
tmp |= 0x01;
OUTB(tmp, base + gpio);
return 0;
}
/**
* Suited for MSI K8N Neo4: nVidia CK804.
*/
static int nvidia_mcp_gpio2_raise(const char *name)
{
return nvidia_mcp_gpio_set(0x02, 1);
}
/**
* Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04.
*/
static int nvidia_mcp_gpio10_raise(const char *name)
{
return nvidia_mcp_gpio_set(0x10, 1);
}
/**
* Suited for the Gigabyte GA-K8N-SLI: CK804 southbridge.
*/
static int nvidia_mcp_gpio21_raise(const char *name)
{
return nvidia_mcp_gpio_set(0x21, 0x01);
}
/**
* Suited for EPoX EP-8RDA3+: Socket A + nForce2 Ultra 400 + MCP2.
*/
static int nvidia_mcp_gpio31_raise(const char *name)
{
return nvidia_mcp_gpio_set(0x31, 0x01);
}
/**
* Suited for Artec Group DBE61 and DBE62.
*/
static int board_artecgroup_dbe6x(const char *name)
{
#define DBE6x_MSR_DIVIL_BALL_OPTS 0x51400015
#define DBE6x_PRI_BOOT_LOC_SHIFT (2)
#define DBE6x_BOOT_OP_LATCHED_SHIFT (8)
#define DBE6x_SEC_BOOT_LOC_SHIFT (10)
#define DBE6x_PRI_BOOT_LOC (3 << DBE6x_PRI_BOOT_LOC_SHIFT)
#define DBE6x_BOOT_OP_LATCHED (3 << DBE6x_BOOT_OP_LATCHED_SHIFT)
#define DBE6x_SEC_BOOT_LOC (3 << DBE6x_SEC_BOOT_LOC_SHIFT)
#define DBE6x_BOOT_LOC_FLASH (2)
#define DBE6x_BOOT_LOC_FWHUB (3)
msr_t msr;
unsigned long boot_loc;
/* Geode only has a single core */
if (setup_cpu_msr(0))
return -1;
msr = rdmsr(DBE6x_MSR_DIVIL_BALL_OPTS);
if ((msr.lo & (DBE6x_BOOT_OP_LATCHED)) ==
(DBE6x_BOOT_LOC_FWHUB << DBE6x_BOOT_OP_LATCHED_SHIFT))
boot_loc = DBE6x_BOOT_LOC_FWHUB;
else
boot_loc = DBE6x_BOOT_LOC_FLASH;
msr.lo &= ~(DBE6x_PRI_BOOT_LOC | DBE6x_SEC_BOOT_LOC);
msr.lo |= ((boot_loc << DBE6x_PRI_BOOT_LOC_SHIFT) |
(boot_loc << DBE6x_SEC_BOOT_LOC_SHIFT));
wrmsr(DBE6x_MSR_DIVIL_BALL_OPTS, msr);
cleanup_cpu_msr();
return 0;
}
/**
* Helper function to raise/drop a given gpo line on intel PIIX4{,E,M}
*/
static int intel_piix4_gpo_set(unsigned int gpo, int raise)
{
unsigned int gpo_byte, gpo_bit;
struct pci_dev *dev;
uint32_t tmp, base;
dev = pci_dev_find(0x8086, 0x7110); /* Intel PIIX4 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: Intel PIIX4 ISA bridge not found.\n");
return -1;
}
/* sanity check */
if (gpo > 30) {
fprintf(stderr, "\nERROR: Intel PIIX4 has no GPO%d.\n", gpo);
return -1;
}
/* these are dual function pins which are most likely in use already */
if (((gpo >= 1) && (gpo <= 7)) ||
((gpo >= 9) && (gpo <= 21)) || (gpo == 29)) {
fprintf(stderr, "\nERROR: Unsupported PIIX4 GPO%d.\n", gpo);
return -1;
}
/* dual function that need special enable. */
if ((gpo >= 22) && (gpo <= 26)) {
tmp = pci_read_long(dev, 0xB0); /* GENCFG */
switch (gpo) {
case 22: /* XBUS: XDIR#/GPO22 */
case 23: /* XBUS: XOE#/GPO23 */
tmp |= 1 << 28;
break;
case 24: /* RTCSS#/GPO24 */
tmp |= 1 << 29;
break;
case 25: /* RTCALE/GPO25 */
tmp |= 1 << 30;
break;
case 26: /* KBCSS#/GPO26 */
tmp |= 1 << 31;
break;
}
pci_write_long(dev, 0xB0, tmp);
}
/* GPO {0,8,27,28,30} are always available. */
dev = pci_dev_find(0x8086, 0x7113); /* Intel PIIX4 PM */
if (!dev) {
fprintf(stderr, "\nERROR: Intel PIIX4 PM not found.\n");
return -1;
}
/* PM IO base */
base = pci_read_long(dev, 0x40) & 0x0000FFC0;
gpo_byte = gpo >> 3;
gpo_bit = gpo & 7;
tmp = INB(base + 0x34 + gpo_byte); /* GPO register */
if (raise)
tmp |= 0x01 << gpo_bit;
else
tmp &= ~(0x01 << gpo_bit);
OUTB(tmp, base + 0x34 + gpo_byte);
return 0;
}
/**
* Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards.
*/
static int board_epox_ep_bx3(const char *name)
{
return intel_piix4_gpo_set(22, 1);
}
/**
* Set a GPIO line on a given intel ICH LPC controller.
*/
static int intel_ich_gpio_set(int gpio, int raise)
{
/* table mapping the different intel ICH LPC chipsets. */
static struct {
uint16_t id;
uint8_t base_reg;
uint32_t bank0;
uint32_t bank1;
uint32_t bank2;
} intel_ich_gpio_table[] = {
{0x2410, 0x58, 0x0FE30000, 0, 0}, /* 82801AA (ICH) */
{0x2420, 0x58, 0x0FE30000, 0, 0}, /* 82801AB (ICH0) */
{0x2440, 0x58, 0x1BFF391B, 0, 0}, /* 82801BA (ICH2) */
{0x244C, 0x58, 0x1A23399B, 0, 0}, /* 82801BAM (ICH2M) */
{0x2450, 0x58, 0x1BFF0000, 0, 0}, /* 82801E (C-ICH) */
{0x2480, 0x58, 0x1BFF0000, 0x00000FFF, 0}, /* 82801CA (ICH3-S) */
{0x248C, 0x58, 0x1A230000, 0x00000FFF, 0}, /* 82801CAM (ICH3-M) */
{0x24C0, 0x58, 0x1BFF0000, 0x00000FFF, 0}, /* 82801DB/DBL (ICH4/ICH4-L) */
{0x24CC, 0x58, 0x1A030000, 0x00000FFF, 0}, /* 82801DBM (ICH4-M) */
{0x24D0, 0x58, 0x1BFF0000, 0x00030305, 0}, /* 82801EB/ER (ICH5/ICH5R) */
{0x2640, 0x48, 0x1BFF0000, 0x00030307, 0}, /* 82801FB/FR (ICH6/ICH6R) */
{0x2641, 0x48, 0x1BFF0000, 0x00030307, 0}, /* 82801FBM (ICH6M) */
{0x27B8, 0x48, 0xFFFFFFFF, 0x000300FF, 0}, /* 82801GB/GR (ICH7 Family) */
{0x27B9, 0x48, 0xFFEBFFFE, 0x000300FE, 0}, /* 82801GBM (ICH7-M) */
{0x27BD, 0x48, 0xFFEBFFFE, 0x000300FE, 0}, /* 82801GHM (ICH7-M DH) */
{0x2810, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HB/HR (ICH8/R) */
{0x2811, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HBM (ICH8M-E) */
{0x2812, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HH (ICH8DH) */
{0x2814, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HO (ICH8DO) */
{0x2815, 0x48, 0xFFFFFFFF, 0x00FF0FFF, 0}, /* 82801HEM (ICH8M) */
{0x2912, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IH (ICH9DH) */
{0x2914, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IO (ICH9DO) */
{0x2916, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IR (ICH9R) */
{0x2917, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IEM (ICH9M-E) */
{0x2918, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IB (ICH9) */
{0x2919, 0x48, 0xFFFFFFFF, 0x00FFFFFF, 0}, /* 82801IBM (ICH9M) */
{0x3A14, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JDO (ICH10DO) */
{0x3A16, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JIR (ICH10R) */
{0x3A18, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JIB (ICH10) */
{0x3A1A, 0x48, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000100}, /* 82801JD (ICH10D) */
{0, 0, 0, 0, 0} /* end marker */
};
struct pci_dev *dev;
uint16_t base;
uint32_t tmp;
int i, allowed;
/* First, look for a known LPC bridge */
for (dev = pacc->devices; dev; dev = dev->next) {
pci_fill_info(dev, PCI_FILL_CLASS);
if ((dev->vendor_id == 0x8086) &&
(dev->device_class == 0x0601)) { /* ISA Bridge */
/* Is this device in our list? */
for (i = 0; intel_ich_gpio_table[i].id; i++)
if (dev->device_id == intel_ich_gpio_table[i].id)
break;
if (intel_ich_gpio_table[i].id)
break;
}
}
if (!dev) {
fprintf(stderr, "\nERROR: No Known Intel LPC Bridge found.\n");
return -1;
}
/* According to the datasheets, all intel ICHs have the gpio bar 5:1
strapped to zero. From some mobile ich9 version on, this becomes
6:1. The mask below catches all. */
base = pci_read_word(dev, intel_ich_gpio_table[i].base_reg) & 0xFFC0;
/* check whether the line is allowed */
if (gpio < 32)
allowed = (intel_ich_gpio_table[i].bank0 >> gpio) & 0x01;
else if (gpio < 64)
allowed = (intel_ich_gpio_table[i].bank1 >> (gpio - 32)) & 0x01;
else
allowed = (intel_ich_gpio_table[i].bank2 >> (gpio - 64)) & 0x01;
if (!allowed) {
fprintf(stderr, "\nERROR: This Intel LPC Bridge does not allow"
" setting GPIO%02d\n", gpio);
return -1;
}
printf("\nIntel ICH LPC Bridge: %sing GPIO%02d.\n",
raise ? "Rais" : "Dropp", gpio);
if (gpio < 32) {
/* Set line to GPIO */
tmp = INL(base);
/* ICH/ICH0 multiplexes 27/28 on the line set. */
if ((gpio == 28) &&
((dev->device_id == 0x2410) || (dev->device_id == 0x2420)))
tmp |= 1 << 27;
else
tmp |= 1 << gpio;
OUTL(tmp, base);
/* As soon as we are talking to ICH8 and above, this register
decides whether we can set the gpio or not. */
if (dev->device_id > 0x2800) {
tmp = INL(base);
if (!(tmp & (1 << gpio))) {
fprintf(stderr, "\nERROR: This Intel LPC Bridge"
" does not allow setting GPIO%02d\n",
gpio);
return -1;
}
}
/* Set GPIO to OUTPUT */
tmp = INL(base + 0x04);
tmp &= ~(1 << gpio);
OUTL(tmp, base + 0x04);
/* Raise GPIO line */
tmp = INL(base + 0x0C);
if (raise)
tmp |= 1 << gpio;
else
tmp &= ~(1 << gpio);
OUTL(tmp, base + 0x0C);
} else if (gpio < 64) {
gpio -= 32;
/* Set line to GPIO */
tmp = INL(base + 0x30);
tmp |= 1 << gpio;
OUTL(tmp, base + 0x30);
/* As soon as we are talking to ICH8 and above, this register
decides whether we can set the gpio or not. */
if (dev->device_id > 0x2800) {
tmp = INL(base + 30);
if (!(tmp & (1 << gpio))) {
fprintf(stderr, "\nERROR: This Intel LPC Bridge"
" does not allow setting GPIO%02d\n",
gpio + 32);
return -1;
}
}
/* Set GPIO to OUTPUT */
tmp = INL(base + 0x34);
tmp &= ~(1 << gpio);
OUTL(tmp, base + 0x34);
/* Raise GPIO line */
tmp = INL(base + 0x38);
if (raise)
tmp |= 1 << gpio;
else
tmp &= ~(1 << gpio);
OUTL(tmp, base + 0x38);
} else {
gpio -= 64;
/* Set line to GPIO */
tmp = INL(base + 0x40);
tmp |= 1 << gpio;
OUTL(tmp, base + 0x40);
tmp = INL(base + 40);
if (!(tmp & (1 << gpio))) {
fprintf(stderr, "\nERROR: This Intel LPC Bridge does "
"not allow setting GPIO%02d\n", gpio + 64);
return -1;
}
/* Set GPIO to OUTPUT */
tmp = INL(base + 0x44);
tmp &= ~(1 << gpio);
OUTL(tmp, base + 0x44);
/* Raise GPIO line */
tmp = INL(base + 0x48);
if (raise)
tmp |= 1 << gpio;
else
tmp &= ~(1 << gpio);
OUTL(tmp, base + 0x48);
}
return 0;
}
/**
* Suited for Abit IP35: Intel P35 + ICH9R.
*/
static int intel_ich_gpio16_raise(const char *name)
{
return intel_ich_gpio_set(16, 1);
}
/**
* Suited for MSI MS-7046: LGA775 + 915P + ICH6.
*/
static int intel_ich_gpio19_raise(const char *name)
{
return intel_ich_gpio_set(19, 1);
}
/**
* Suited for:
* - Asus P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2.
* - Asus P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R.
*/
static int intel_ich_gpio21_raise(const char *name)
{
return intel_ich_gpio_set(21, 1);
}
/**
* Suited for ASUS P4B266: socket478 + intel 845D + ICH2.
*/
static int intel_ich_gpio22_raise(const char *name)
{
return intel_ich_gpio_set(22, 1);
}
/**
* Suited for:
* - Dell Poweredge 1850: Intel PPGA604 + E7520 + ICH5R.
* - ASRock P4i65GV: Intel Socket478 + 865GV + ICH5R.
*/
static int intel_ich_gpio23_raise(const char *name)
{
return intel_ich_gpio_set(23, 1);
}
/**
* Suited for Acorp 6A815EPD: socket 370 + intel 815 + ICH2.
*/
static int board_acorp_6a815epd(const char *name)
{
int ret;
/* Lower Blocks Lock -- pin 7 of PLCC32 */
ret = intel_ich_gpio_set(22, 1);
if (!ret) /* Top Block Lock -- pin 8 of PLCC32 */
ret = intel_ich_gpio_set(23, 1);
return ret;
}
/**
* Suited for Kontron 986LCD-M: socket478 + 915GM + ICH7R.
*/
static int board_kontron_986lcd_m(const char *name)
{
int ret;
ret = intel_ich_gpio_set(34, 1); /* #TBL */
if (!ret)
ret = intel_ich_gpio_set(35, 1); /* #WP */
return ret;
}
/**
* Suited for Soyo SY-7VCA: Pro133A + VT82C686.
*/
static int board_soyo_sy_7vca(const char *name)
{
struct pci_dev *dev;
uint32_t base;
uint8_t tmp;
/* VT82C686 Power management */
dev = pci_dev_find(0x1106, 0x3057);
if (!dev) {
fprintf(stderr, "\nERROR: VT82C686 PM device not found.\n");
return -1;
}
/* GPO0 output from PM IO base + 0x4C */
tmp = pci_read_byte(dev, 0x54);
tmp &= ~0x03;
pci_write_byte(dev, 0x54, tmp);
/* PM IO base */
base = pci_read_long(dev, 0x48) & 0x0000FF00;
/* Drop GPO0 */
tmp = INB(base + 0x4C);
tmp &= ~0x01;
OUTB(tmp, base + 0x4C);
return 0;
}
/**
* Enable some GPIO pin on SiS southbridge.
* Suited for MSI 651M-L: SiS651 / SiS962
*/
static int board_msi_651ml(const char *name)
{
struct pci_dev *dev;
uint16_t base;
uint16_t temp;
dev = pci_dev_find(0x1039, 0x0962);
if (!dev) {
fprintf(stderr, "Expected south bridge not found\n");
return 1;
}
/* Registers 68 and 64 seem like bitmaps */
base = pci_read_word(dev, 0x74);
temp = INW(base + 0x68);
temp &= ~(1 << 0); /* Make pin output? */
OUTW(temp, base + 0x68);
temp = INW(base + 0x64);
temp |= (1 << 0); /* Raise output? */
OUTW(temp, base + 0x64);
w836xx_memw_enable(0x2E);
return 0;
}
/**
* Find the runtime registers of an SMSC Super I/O, after verifying its
* chip ID.
*
* Returns the base port of the runtime register block, or 0 on error.
*/
static uint16_t smsc_find_runtime(uint16_t sio_port, uint16_t chip_id,
uint8_t logical_device)
{
uint16_t rt_port = 0;
/* Verify the chip ID. */
OUTB(0x55, sio_port); /* Enable configuration. */
if (sio_read(sio_port, 0x20) != chip_id) {
fprintf(stderr, "\nERROR: SMSC Super I/O not found.\n");
goto out;
}
/* If the runtime block is active, get its address. */
sio_write(sio_port, 0x07, logical_device);
if (sio_read(sio_port, 0x30) & 1) {
rt_port = (sio_read(sio_port, 0x60) << 8)
| sio_read(sio_port, 0x61);
}
if (rt_port == 0) {
fprintf(stderr, "\nERROR: "
"Super I/O runtime interface not available.\n");
}
out:
OUTB(0xaa, sio_port); /* Disable configuration. */
return rt_port;
}
/**
* Disable write protection on the Mitac 6513WU. WP# on the FWH is
* connected to GP30 on the Super I/O, and TBL# is always high.
*/
static int board_mitac_6513wu(const char *name)
{
struct pci_dev *dev;
uint16_t rt_port;
uint8_t val;
dev = pci_dev_find(0x8086, 0x2410); /* Intel 82801AA ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: Intel 82801AA ISA bridge not found.\n");
return -1;
}
rt_port = smsc_find_runtime(0x4e, 0x54 /* LPC47U33x */, 0xa);
if (rt_port == 0)
return -1;
/* Configure the GPIO pin. */
val = INB(rt_port + 0x33); /* GP30 config */
val &= ~0x87; /* Output, non-inverted, GPIO, push/pull */
OUTB(val, rt_port + 0x33);
/* Disable write protection. */
val = INB(rt_port + 0x4d); /* GP3 values */
val |= 0x01; /* Set GP30 high. */
OUTB(val, rt_port + 0x4d);
return 0;
}
/**
* Suited for Asus A7V8X: VIA KT400 + VT8235 + IT8703F-A
*/
static int board_asus_a7v8x(const char *name)
{
uint16_t id, base;
uint8_t tmp;
/* find the IT8703F */
w836xx_ext_enter(0x2E);
id = (sio_read(0x2E, 0x20) << 8) | sio_read(0x2E, 0x21);
w836xx_ext_leave(0x2E);
if (id != 0x8701) {
fprintf(stderr, "\nERROR: IT8703F SuperIO not found.\n");
return -1;
}
/* Get the GP567 IO base */
w836xx_ext_enter(0x2E);
sio_write(0x2E, 0x07, 0x0C);
base = (sio_read(0x2E, 0x60) << 8) | sio_read(0x2E, 0x61);
w836xx_ext_leave(0x2E);
if (!base) {
fprintf(stderr, "\nERROR: Failed to read IT8703F SuperIO GPIO"
" Base.\n");
return -1;
}
/* Raise GP51. */
tmp = INB(base);
tmp |= 0x02;
OUTB(tmp, base);
return 0;
}
/*
* General routine for raising/dropping GPIO lines on the ITE IT8712F.
* There is only some limited checking on the port numbers.
*/
static int
it8712f_gpio_set(unsigned int line, int raise)
{
unsigned int port;
uint16_t id, base;
uint8_t tmp;
port = line / 10;
port--;
line %= 10;
/* Check line */
if ((port > 4) || /* also catches unsigned -1 */
((port < 4) && (line > 7)) || ((port == 4) && (line > 5))) {
fprintf(stderr,
"\nERROR: Unsupported IT8712F GPIO Line %02d.\n", line);
return -1;
}
/* find the IT8712F */
enter_conf_mode_ite(0x2E);
id = (sio_read(0x2E, 0x20) << 8) | sio_read(0x2E, 0x21);
exit_conf_mode_ite(0x2E);
if (id != 0x8712) {
fprintf(stderr, "\nERROR: IT8712F SuperIO not found.\n");
return -1;
}
/* Get the GPIO base */
enter_conf_mode_ite(0x2E);
sio_write(0x2E, 0x07, 0x07);
base = (sio_read(0x2E, 0x62) << 8) | sio_read(0x2E, 0x63);
exit_conf_mode_ite(0x2E);
if (!base) {
fprintf(stderr, "\nERROR: Failed to read IT8712F SuperIO GPIO"
" Base.\n");
return -1;
}
/* set GPIO. */
tmp = INB(base + port);
if (raise)
tmp |= 1 << line;
else
tmp &= ~(1 << line);
OUTB(tmp, base + port);
return 0;
}
/**
* Suited for Asus A7V600-X: VIA KT600 + VT8237 + IT8712F
*/
static int board_asus_a7v600x(const char *name)
{
return it8712f_gpio_set(32, 1);
}
/**
* Below is the list of boards which need a special "board enable" code in
* flashrom before their ROM chip can be accessed/written to.
*
* NOTE: Please add boards that _don't_ need such enables or don't work yet
* to the respective tables in print.c. Thanks!
*
* We use 2 sets of IDs here, you're free to choose which is which. This
* is to provide a very high degree of certainty when matching a board on
* the basis of subsystem/card IDs. As not every vendor handles
* subsystem/card IDs in a sane manner.
*
* Keep the second set NULLed if it should be ignored. Keep the subsystem IDs
* NULLed if they don't identify the board fully and if you can't use DMI.
* But please take care to provide an as complete set of pci ids as possible;
* autodetection is the preferred behaviour and we would like to make sure that
* matches are unique.
*
* If PCI IDs are not sufficient for board matching, the match can be further
* constrained by a string that has to be present in the DMI database for
* the baseboard or the system entry. The pattern is matched by case sensitve
* substring match, unless it is anchored to the beginning (with a ^ in front)
* or the end (with a $ at the end). Both anchors may be specified at the
* same time to match the full field.
*
* When a board is matched through DMI, the first and second main PCI IDs
* and the first subsystem PCI ID have to match as well. If you specify the
* first subsystem ID as 0x0:0x0, the DMI matching code expects that the
* subsystem ID of that device is indeed zero.
*
* The coreboot ids are used two fold. When running with a coreboot firmware,
* the ids uniquely matches the coreboot board identification string. When a
* legacy bios is installed and when autodetection is not possible, these ids
* can be used to identify the board through the -m command line argument.
*
* When a board is identified through its coreboot ids (in both cases), the
* main pci ids are still required to match, as a safeguard.
*/
/* Please keep this list alphabetically ordered by vendor/board name. */
struct board_pciid_enable board_pciid_enables[] = {
/* first pci-id set [4], second pci-id set [4], dmi identifier coreboot id [2], vendor name board name max_rom_... flash enable */
{0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, intel_ich_gpio16_raise},
{0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, "Acorp", "6A815EPD", 0, board_acorp_6a815epd},
{0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, intel_ich_gpio23_raise},
{0x1022, 0x746B, 0, 0, 0, 0, 0, 0, NULL, "AGAMI", "ARUMA", "agami", "Aruma", 0, w83627hf_gpio24_raise_2e},
{0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, NULL, "Albatron", "PM266A", 0, w836xx_memw_enable_2e},
{0x1106, 0x3205, 0x1106, 0x3205, 0x10EC, 0x8139, 0xA0A0, 0x0477, NULL, NULL, NULL, "AOpen", "vKM400Am-S", 0, it8705f_write_enable_2e},
{0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe61", "Artec Group", "DBE61", 0, board_artecgroup_dbe6x},
{0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe62", "Artec Group", "DBE62", 0, board_artecgroup_dbe6x},
{0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, "ASUS", "A7V600-X", 0, board_asus_a7v600x},
{0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, board_asus_a7v8x},
{0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, "ASUS", "A7V8X-MX SE", 0, w836xx_memw_enable_2e},
{0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, "ASUS", "M2V-MX", 0, via_vt823x_gpio5_raise},
{0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, intel_ich_gpio22_raise},
{0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, "ASUS", "P4B266-LM", 0, intel_ich_gpio21_raise},
{0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, intel_ich_gpio21_raise},
{0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, board_asus_p5a},
{0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, nvidia_mcp_gpio10_raise},
{0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202, NULL, NULL, NULL, "Biostar", "P4M80-M4", 0, it8705f_write_enable_2e},
{0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, "Dell", "PowerEdge 1850", 0, intel_ich_gpio23_raise},
{0x1039, 0x5513, 0x1019, 0x0A41, 0x1039, 0x0018, 0, 0, NULL, NULL, NULL, "Elitegroup", "K7S6A", 0, it8705f_write_enable_2e},
{0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, "Elitegroup", "K7VTA3", 256, it8705f_write_enable_2e},
{0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, NULL, "EPoX", "EP-8K5A2", 0, w836xx_memw_enable_2e},
{0x10EC, 0x8139, 0x1695, 0x9001, 0x11C1, 0x5811, 0x1695, 0x9015, NULL, NULL, NULL, "EPoX", "EP-8RDA3+", 0, nvidia_mcp_gpio31_raise},
{0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, NULL, "epox", "ep-bx3", "EPoX", "EP-BX3", 0, board_epox_ep_bx3},
{0x1106, 0x0686, 0x1106, 0x0686, 0x1106, 0x3058, 0x1458, 0xa000, NULL, NULL, NULL, "GIGABYTE", "GA-7ZM", 512, NULL},
{0x1039, 0x0761, 0, 0, 0x10EC, 0x8168, 0, 0, NULL, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", 0, it87xx_probe_spi_flash},
{0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, NULL, "GIGABYTE", "GA-7VT600", 0, it8705f_write_enable_2e},
{0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", 0, nvidia_mcp_gpio21_raise},
{0x10DE, 0x0360, 0x1458, 0x0C11, 0x10DE, 0x0369, 0x1458, 0x5001, NULL, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", 0, it87xx_probe_spi_flash},
{0x10de, 0x03e0, 0, 0, 0x10DE, 0x03D0, 0, 0, NULL, NULL, NULL, "GIGABYTE", "GA-M61P-S3", 0, it87xx_probe_spi_flash},
{0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb000, NULL, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", 0, it87xx_probe_spi_flash},
{0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb002, NULL, NULL, NULL, "GIGABYTE", "GA-MA78GM-S2H", 0, it87xx_probe_spi_flash},
{0x1002, 0x438d, 0x1458, 0x5001, 0x1002, 0x5956, 0x1002, 0x5956, NULL, NULL, NULL, "GIGABYTE", "GA-MA790FX-DQ6", 0, it87xx_probe_spi_flash},
{0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, NULL, "hp", "dl145_g3", "HP", "DL145 G3", 0, board_hp_dl145_g3_enable},
{0x1166, 0x0205, 0x1014, 0x0347, 0x1002, 0x515E, 0x1014, 0x0325, NULL, NULL, NULL, "IBM", "x3455", 0, board_ibm_x3455},
{0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, NULL, "Intel", "D201GLY", 0, wbsio_check_for_spi},
{0x1022, 0x7468, 0, 0, 0, 0, 0, 0, NULL, "iwill", "dk8_htx", "IWILL", "DK8-HTX", 0, w83627hf_gpio24_raise_2e},
{0x8086, 0x27A0, 0, 0, 0x8086, 0x27b8, 0, 0, NULL, "kontron", "986lcd-m", "Kontron", "986LCD-M", 0, board_kontron_986lcd_m},
{0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, "Mitac", "6513WU", 0, board_mitac_6513wu},
{0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, NULL, "MSI", "MS-6590 (KT4 Ultra)", 0, board_msi_kt4v},
{0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)", 0, w83627thf_gpio4_4_raise_2e},
{0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, "MSI", "MS-6712 (KT4V)", 0, board_msi_kt4v},
{0x1039, 0x7012, 0x1462, 0x0050, 0x1039, 0x6325, 0x1462, 0x0058, NULL, NULL, NULL, "MSI", "MS-7005 (651M-L)", 0, board_msi_651ml},
{0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, "MSI", "MS-7046", 0, intel_ich_gpio19_raise},
{0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, NULL, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", 0, w83627thf_gpio4_4_raise_4e},
{0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, "MSI", "K8N Neo4-F", 0, nvidia_mcp_gpio2_raise},
{0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, NULL, "shuttle", "ak31", "Shuttle", "AK31", 0, w836xx_memw_enable_2e},
{0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, NULL, "Shuttle", "AK38N", 256, it8705f_write_enable_2e},
{0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, NULL, "Shuttle", "FN25", 0, board_shuttle_fn25},
{0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x3058, 0x15DD, 0x7609, NULL, NULL, NULL, "Soyo", "SY-7VCA", 0, board_soyo_sy_7vca},
{0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", 0, w836xx_memw_enable_2e},
{0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x0596, 0x1106, 0, NULL, NULL, NULL, "Tekram", "P6Pro-A5", 256, NULL},
{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, NULL, "VIA", "EPIA M/MII/...", 0, via_vt823x_gpio15_raise},
{0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, NULL, "VIA", "EPIA-N/NL", 0, via_vt823x_gpio9_raise},
{0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, NULL, NULL, NULL, "VIA", "PC3500G", 0, it87xx_probe_spi_flash},
{ 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL, 0, NULL}, /* end marker */
};
/**
* Match boards on coreboot table gathered vendor and part name.
* Require main PCI IDs to match too as extra safety.
*/
static struct board_pciid_enable *board_match_coreboot_name(const char *vendor,
const char *part)
{
struct board_pciid_enable *board = board_pciid_enables;
struct board_pciid_enable *partmatch = NULL;
for (; board->vendor_name; board++) {
if (vendor && (!board->lb_vendor
|| strcasecmp(board->lb_vendor, vendor)))
continue;
if (!board->lb_part || strcasecmp(board->lb_part, part))
continue;
if (!pci_dev_find(board->first_vendor, board->first_device))
continue;
if (board->second_vendor &&
!pci_dev_find(board->second_vendor, board->second_device))
continue;
if (vendor)
return board;
if (partmatch) {
/* a second entry has a matching part name */
printf("AMBIGUOUS BOARD NAME: %s\n", part);
printf("At least vendors '%s' and '%s' match.\n",
partmatch->lb_vendor, board->lb_vendor);
printf("Please use the full -m vendor:part syntax.\n");
return NULL;
}
partmatch = board;
}
if (partmatch)
return partmatch;
if (!partvendor_from_cbtable) {
/* Only warn if the mainboard type was not gathered from the
* coreboot table. If it was, the coreboot implementor is
* expected to fix flashrom, too.
*/
printf("\nUnknown vendor:board from -m option: %s:%s\n\n",
vendor, part);
}
return NULL;
}
/**
* Match boards on PCI IDs and subsystem IDs.
* Second set of IDs can be main only or missing completely.
*/
static struct board_pciid_enable *board_match_pci_card_ids(void)
{
struct board_pciid_enable *board = board_pciid_enables;
for (; board->vendor_name; board++) {
if ((!board->first_card_vendor || !board->first_card_device) &&
!board->dmi_pattern)
continue;
if (!pci_card_find(board->first_vendor, board->first_device,
board->first_card_vendor,
board->first_card_device))
continue;
if (board->second_vendor) {
if (board->second_card_vendor) {
if (!pci_card_find(board->second_vendor,
board->second_device,
board->second_card_vendor,
board->second_card_device))
continue;
} else {
if (!pci_dev_find(board->second_vendor,
board->second_device))
continue;
}
}
if (board->dmi_pattern) {
if (!has_dmi_support) {
fprintf(stderr, "WARNING: Can't autodetect %s %s,"
" DMI info unavailable.\n",
board->vendor_name, board->board_name);
continue;
} else {
if (!dmi_match(board->dmi_pattern))
continue;
}
}
return board;
}
return NULL;
}
int board_flash_enable(const char *vendor, const char *part)
{
struct board_pciid_enable *board = NULL;
int ret = 0;
if (part)
board = board_match_coreboot_name(vendor, part);
if (!board)
board = board_match_pci_card_ids();
if (board) {
if (board->max_rom_decode_parallel)
max_rom_decode.parallel =
board->max_rom_decode_parallel * 1024;
if (board->enable != NULL) {
printf("Disabling flash write protection for "
"board \"%s %s\"... ", board->vendor_name,
board->board_name);
ret = board->enable(board->vendor_name);
if (ret)
printf("FAILED!\n");
else
printf("OK.\n");
}
}
return ret;
}