Ronald G. Minnich | e3dad01 | 2004-02-10 21:34:18 +0000 | [diff] [blame^] | 1 | /* |
| 2 | * pm49fl004.c: driver for Pm49FL004 flash models. |
| 3 | * |
| 4 | * |
| 5 | * Copyright 2004 Tyan Corporation |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; either version 2 of the License, or |
| 10 | * (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License |
| 18 | * along with this program; if not, write to the Free Software |
| 19 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | * |
| 21 | * |
| 22 | */ |
| 23 | |
| 24 | #include <stdio.h> |
| 25 | #include "flash.h" |
| 26 | #include "jedec.h" |
| 27 | #include "pm49fl004.h" |
| 28 | |
| 29 | #define AUTO_PGRM 0x10 |
| 30 | #define CHIP_ERASE 0x30 |
| 31 | #define RESET 0xFF |
| 32 | #define READ_ID 0x90 |
| 33 | |
| 34 | static __inline__ void protect_49fl004 (volatile char * bios) |
| 35 | { |
| 36 | /* ask compiler not to optimize this */ |
| 37 | volatile unsigned char tmp; |
| 38 | |
| 39 | tmp = *(volatile unsigned char *) (bios + 0x1823); |
| 40 | tmp = *(volatile unsigned char *) (bios + 0x1820); |
| 41 | tmp = *(volatile unsigned char *) (bios + 0x1822); |
| 42 | tmp = *(volatile unsigned char *) (bios + 0x0418); |
| 43 | tmp = *(volatile unsigned char *) (bios + 0x041B); |
| 44 | tmp = *(volatile unsigned char *) (bios + 0x0419); |
| 45 | tmp = *(volatile unsigned char *) (bios + 0x040A); |
| 46 | } |
| 47 | |
| 48 | static __inline__ void unprotect_49fl004 (volatile char * bios) |
| 49 | { |
| 50 | /* ask compiler not to optimize this */ |
| 51 | volatile unsigned char tmp; |
| 52 | |
| 53 | tmp = *(volatile unsigned char *) (bios + 0x1823); |
| 54 | tmp = *(volatile unsigned char *) (bios + 0x1820); |
| 55 | tmp = *(volatile unsigned char *) (bios + 0x1822); |
| 56 | tmp = *(volatile unsigned char *) (bios + 0x0418); |
| 57 | tmp = *(volatile unsigned char *) (bios + 0x041B); |
| 58 | tmp = *(volatile unsigned char *) (bios + 0x0419); |
| 59 | tmp = *(volatile unsigned char *) (bios + 0x041A); |
| 60 | } |
| 61 | |
| 62 | static __inline__ int erase_block_49fl004 ( volatile unsigned char * bios ,unsigned long address) |
| 63 | { |
| 64 | volatile unsigned char *Temp; |
| 65 | |
| 66 | Temp = bios + 0x5555; /* set up address to be C000:5555h */ |
| 67 | *Temp = 0xAA; /* write data 0xAA to the address */ |
| 68 | myusec_delay(10); |
| 69 | Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */ |
| 70 | *Temp = 0x55; /* write data 0x55 to the address */ |
| 71 | myusec_delay(10); |
| 72 | Temp = bios + 0x5555; /* set up address to be C000:5555h */ |
| 73 | *Temp = 0x80; /* write data 0x80 to the address */ |
| 74 | myusec_delay(10); |
| 75 | Temp = bios + 0x5555; /* set up address to be C000:5555h */ |
| 76 | *Temp = 0xAA; /* write data 0xAA to the address */ |
| 77 | myusec_delay(10); |
| 78 | Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */ |
| 79 | *Temp = 0x55; /* write data 0x55 to the address */ |
| 80 | myusec_delay(10); |
| 81 | Temp = bios + address; /* set up address to be C000:5555h */ |
| 82 | *Temp = 0x50; /* write data 0x55 to the address */ |
| 83 | |
| 84 | /* wait for Toggle bit ready */ |
| 85 | toggle_ready_jedec(bios); |
| 86 | |
| 87 | return(0); |
| 88 | } |
| 89 | static __inline__ int write_block_49fl004(volatile char * bios, |
| 90 | unsigned char * src, |
| 91 | volatile unsigned char * dst, |
| 92 | unsigned int page_size) |
| 93 | { |
| 94 | int i; |
| 95 | volatile char *Temp; |
| 96 | |
| 97 | for (i = 0; i < page_size; i++) { |
| 98 | if (*dst != 0xff) { |
| 99 | printf("FATAL: dst %p not erased (val 0x%x\n", dst, *dst); |
| 100 | return(-1); |
| 101 | } |
| 102 | /* transfer data from source to destination */ |
| 103 | if (*src == 0xFF) { |
| 104 | dst++, src++; |
| 105 | /* If the data is 0xFF, don't program it */ |
| 106 | continue; |
| 107 | } |
| 108 | Temp = (bios + 0x5555); |
| 109 | *Temp = 0xAA; |
| 110 | Temp = bios + 0x2AAA; |
| 111 | *Temp = 0x55; |
| 112 | Temp = bios + 0x5555; |
| 113 | *Temp = 0xA0; |
| 114 | *dst = *src; |
| 115 | toggle_ready_jedec(bios); |
| 116 | if (*dst != *src) |
| 117 | printf("BAD! dst 0x%lx val 0x%x src 0x%x\n", |
| 118 | (unsigned long)dst, *dst, *src); |
| 119 | dst++, src++; |
| 120 | } |
| 121 | |
| 122 | return(0); |
| 123 | } |
| 124 | |
| 125 | int probe_49fl004 (struct flashchip * flash) |
| 126 | { |
| 127 | volatile char * bios = flash->virt_addr; |
| 128 | unsigned char id1, id2; |
| 129 | |
| 130 | *(volatile char *) (bios + 0x5555) = 0xAA; |
| 131 | myusec_delay(10); |
| 132 | *(volatile char *) (bios + 0x2AAA) = 0x55; |
| 133 | myusec_delay(10); |
| 134 | *(volatile char *) (bios + 0x5555) = 0x90; |
| 135 | |
| 136 | myusec_delay(10); |
| 137 | |
| 138 | id1 = *(volatile unsigned char *) bios; |
| 139 | id2 = *(volatile unsigned char *) (bios + 0x01); |
| 140 | |
| 141 | *(volatile char *) (bios + 0x5555) = 0xAA; |
| 142 | *(volatile char *) (bios + 0x2AAA) = 0x55; |
| 143 | *(volatile char *) (bios + 0x5555) = 0xF0; |
| 144 | |
| 145 | myusec_delay(10); |
| 146 | |
| 147 | printf("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2); |
| 148 | |
| 149 | if (id1 == flash->manufacture_id && id2 == flash->model_id) |
| 150 | return 1; |
| 151 | |
| 152 | return 0; |
| 153 | } |
| 154 | |
| 155 | int erase_49fl004 (struct flashchip * flash) |
| 156 | { |
| 157 | volatile unsigned char * bios = flash->virt_addr; |
| 158 | volatile unsigned char *Temp; |
| 159 | |
| 160 | Temp = bios + 0x5555; /* set up address to be C000:5555h */ |
| 161 | *Temp = 0xAA; /* write data 0xAA to the address */ |
| 162 | myusec_delay(10); |
| 163 | Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */ |
| 164 | *Temp = 0x55; /* write data 0x55 to the address */ |
| 165 | myusec_delay(10); |
| 166 | Temp = bios + 0x5555; /* set up address to be C000:5555h */ |
| 167 | *Temp = 0x80; /* write data 0x80 to the address */ |
| 168 | myusec_delay(10); |
| 169 | Temp = bios + 0x5555; /* set up address to be C000:5555h */ |
| 170 | *Temp = 0xAA; /* write data 0xAA to the address */ |
| 171 | myusec_delay(10); |
| 172 | Temp = bios + 0x2AAA; /* set up address to be C000:2AAAh */ |
| 173 | *Temp = 0x55; /* write data 0x55 to the address */ |
| 174 | myusec_delay(10); |
| 175 | Temp = bios + 0x5555; /* set up address to be C000:5555h */ |
| 176 | *Temp = 0x10; /* write data 0x10 to the address */ |
| 177 | |
| 178 | |
| 179 | /* wait for Toggle bit ready */ |
| 180 | toggle_ready_jedec(bios); |
| 181 | |
| 182 | return(0); |
| 183 | } |
| 184 | |
| 185 | int write_49fl004 (struct flashchip * flash, unsigned char * buf) |
| 186 | { |
| 187 | int i; |
| 188 | int total_size = flash->total_size * 1024, page_size = flash->page_size; |
| 189 | volatile char * bios = flash->virt_addr; |
| 190 | |
| 191 | // unprotect_49fl004 (bios); |
| 192 | // erase_49fl004(flash); |
| 193 | printf ("Programming Page: "); |
| 194 | for (i = 0; i < total_size/page_size; i++) { |
| 195 | /* erase the page before programming */ |
| 196 | erase_block_49fl004(bios, i * page_size); |
| 197 | |
| 198 | /* write to the sector */ |
| 199 | printf ("%04d at address: 0x%08x", i, i * page_size); |
| 200 | write_block_49fl004(bios, buf + i * page_size, bios + i * page_size, |
| 201 | page_size); |
| 202 | printf ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); |
| 203 | fflush(stdout); |
| 204 | } |
| 205 | printf("\n"); |
| 206 | |
| 207 | // protect_49fl004 (bios); |
| 208 | |
| 209 | return(0); |
| 210 | } |