| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2000 Silicon Integrated System Corporation |
| * Copyright (C) 2004 Tyan Corp |
| * Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org> |
| * Copyright (C) 2006-2009 Carl-Daniel Hailfinger |
| * Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include "flash.h" |
| #include "flashchips.h" |
| #include "chipdrivers.h" |
| |
| /** |
| * List of supported flash chips. |
| * |
| * Please keep the list sorted by vendor name and chip name, so that |
| * the output of 'flashrom -L' is alphabetically sorted. |
| */ |
| const struct flashchip flashchips[] = { |
| |
| /* |
| * .vendor = Vendor name |
| * .name = Chip name |
| * .bustype = Supported flash bus types (Parallel, LPC...) |
| * .manufacture_id = Manufacturer chip ID |
| * .model_id = Model chip ID |
| * .total_size = Total size in (binary) kbytes |
| * .page_size = Page or eraseblock(?) size in bytes |
| * .tested = Test status |
| * .probe = Probe function |
| * .probe_timing = Probe function delay |
| * .block_erasers[] = Array of erase layouts and erase functions |
| * { |
| * .eraseblocks[] = Array of { blocksize, blockcount } |
| * .block_erase = Block erase function |
| * } |
| * .printlock = Chip lock status function |
| * .unlock = Chip unlock function |
| * .write = Chip write function |
| * .read = Chip read function |
| * .voltage = Voltage range in millivolt |
| */ |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29F010A/B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29F010B, /* Same as Am29F010A */ |
| .total_size = 128, |
| .page_size = 16 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {16 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29F002(N)BB", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29F002BB, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29F002(N)BT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29F002BT, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29F016D", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29F016D, |
| .total_size = 2 * 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {2048 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29F040B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29F040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29F080B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29F080B, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV001BB", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV001BB, |
| .total_size = 128, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| {16 * 1024, 7}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV001BT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV001BT, |
| .total_size = 128, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 7}, |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV002BB", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV002BB, |
| .total_size = 256, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV002BT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV002BT, |
| .total_size = 256, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV004BB", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV004BB, |
| .total_size = 512, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 7}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV004BT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV004BT, |
| .total_size = 512, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 7}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV008BB", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV008BB, |
| .total_size = 1024, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 15}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV008BT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV008BT, |
| .total_size = 1024, |
| .page_size = 64 * 1024, /* unused */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 15}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV040B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/ |
| }, |
| |
| { |
| .vendor = "AMD", |
| .name = "Am29LV081B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMD_ID, |
| .model_id = AMD_AM29LV080B, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */ |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L05PT", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L05PT, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l05p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L05PU", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L05PU, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l05p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L10PT", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L10PT, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 1}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l05p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L10PU", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L10PU, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 1}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l05p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L20PT", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L20PT, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l05p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L20PU", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L20PU, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l05p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| /* The A25L40P{T,U} chips are distinguished by their |
| * erase block layouts, but without any distinction in RDID. |
| * This inexplicable quirk was verified by Rudolf Marek |
| * and discussed on the flashrom mailing list on 2010-07-12. |
| */ |
| { |
| .vendor = "AMIC", |
| .name = "A25L40PT", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L40PT, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 7}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L40PU", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L40PU, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 7}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L80P", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L80P, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PRE, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 15}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L16PT", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L16PT, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 31}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2048 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2048 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L16PU", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = AMIC_A25L16PU, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 31}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2048 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2048 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L512", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25L512, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 16 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 1 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 64 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L010", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25L010, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 32 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 2 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 128 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L020", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25L020, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 64 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 4 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 256 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L040", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25L040, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 128 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 8 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 512 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L080", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25L080, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 256 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 16 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 1024 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L016", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25L016, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 512 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 32 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 2048 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l40p, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25L032", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25L032, |
| .total_size = 4096, |
| .page_size = 256, |
| /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 1024 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 64 } }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { { 64 * 1024, 64 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 4096 * 1024, 1 } }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { { 4096 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25l032, |
| .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A25LQ032", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A25LQ032, |
| .total_size = 4096, |
| .page_size = 256, |
| /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 1024 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { { 64 * 1024, 64 } }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { { 64 * 1024, 64 } }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { { 4096 * 1024, 1 } }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { { 4096 * 1024, 1 } }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_amic_a25lq032, |
| .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A29002B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A29002B, |
| .total_size = 256, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A29002T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A29002T, |
| .total_size = 256, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A29040B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A29040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "A49LF040A", |
| .bustype = BUS_LPC, |
| .manufacture_id = AMIC_ID_NOPREFIX, |
| .model_id = AMIC_A49LF040A, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .unlock = unlock_49fl00x, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF021", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF021, |
| .total_size = 256, |
| .page_size = 256, |
| /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 8} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df, |
| .unlock = spi_disable_blockprotect_at25df, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF041A", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF041A, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df, |
| .unlock = spi_disable_blockprotect_at25df, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF081", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF081, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df, |
| .unlock = spi_disable_blockprotect_at25df, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */ |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF081A", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF081A, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df_sec, |
| .unlock = spi_disable_blockprotect_at25df_sec, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF161", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF161, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df_sec, |
| .unlock = spi_disable_blockprotect_at25df_sec, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF321", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF321, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 128} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df, |
| .unlock = spi_disable_blockprotect_at25df, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF321A", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF321A, |
| .total_size = 4096, |
| .page_size = 256, |
| /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 128} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df_sec, |
| .unlock = spi_disable_blockprotect_at25df_sec, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DF641(A)", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DF641, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 256} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df_sec, |
| .unlock = spi_disable_blockprotect_at25df_sec, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25DQ161", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25DQ161, |
| .total_size = 2048, |
| .page_size = 256, |
| /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df_sec, |
| .unlock = spi_disable_blockprotect_at25df_sec, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25F512B", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25F512B, |
| .total_size = 64, |
| .page_size = 256, |
| /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 16} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 2} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {32 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_62, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25f512b, |
| .unlock = spi_disable_blockprotect_at25f512b, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25FS010", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25FS010, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_d7, |
| }, { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25fs010, |
| .unlock = spi_disable_blockprotect_at25fs010, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT25FS040", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT25FS040, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25fs040, |
| .unlock = spi_disable_blockprotect_at25fs040, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT26DF041", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT26DF041, |
| .total_size = 512, |
| .page_size = 256, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| } |
| }, |
| .write = NULL /* Incompatible Page write */, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT26DF081A", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT26DF081A, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_atmel_at26df081a, |
| .unlock = spi_disable_blockprotect_at25df, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT26DF161", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT26DF161, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_at25df, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT26DF161A", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT26DF161A, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .printlock = spi_prettyprint_status_register_atmel_at26df081a, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| /*The AT26DF321 has the same ID as the AT25DF321. */ |
| /*{ |
| .vendor = "Atmel", |
| .name = "AT26DF321", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT26DF321, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .printlock = spi_prettyprint_status_register_atmel_at26df081a, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| },*/ |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT26F004", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT26F004, |
| .total_size = 512, |
| .page_size = 256, |
| .tested = TEST_UNTESTED, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .write = NULL /* Incompatible Page write */, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT29C512", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT29C512, |
| .total_size = 64, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10000, /* 10mS, Enter=Exec */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT29C010A", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT29C010A, |
| .total_size = 128, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = 10000, /* 10mS, Enter=Exec */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, /* FIXME */ |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT29C020", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT29C020, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 10000, /* 10ms */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT29C040A", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT29C040A, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 10000, /* 10 ms */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45CS1282", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45CS1282, |
| .total_size = 16896 /* No power of two sizes */, |
| .page_size = 1056 /* No power of two sizes */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL /* Incompatible Page write */, |
| .read = NULL /* Incompatible read */, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB011D", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB011D, |
| .total_size = 128 /* Size can only be determined from status register */, |
| .page_size = 256 /* Size can only be determined from status register */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB021D", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB021D, |
| .total_size = 256 /* Size can only be determined from status register */, |
| .page_size = 256 /* Size can only be determined from status register */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB041D", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB041D, |
| .total_size = 512 /* Size can only be determined from status register */, |
| .page_size = 256 /* Size can only be determined from status register */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| .voltage = {2500, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB081D", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB081D, |
| .total_size = 1024 /* Size can only be determined from status register */, |
| .page_size = 256 /* Size can only be determined from status register */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB161D", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB161D, |
| .total_size = 2048 /* Size can only be determined from status register */, |
| .page_size = 512 /* Size can only be determined from status register */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB321C", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB321C, |
| .total_size = 4224 /* No power of two sizes */, |
| .page_size = 528 /* No power of two sizes */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL /* Incompatible read */, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB321D", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB321D, |
| .total_size = 4096 /* Size can only be determined from status register */, |
| .page_size = 512 /* Size can only be determined from status register */, |
| /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .feature_bits = FEATURE_OTP, |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT45DB642D", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT45DB642D, |
| .total_size = 8192 /* Size can only be determined from status register */, |
| .page_size = 1024 /* Size can only be determined from status register */, |
| /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ |
| .tested = TEST_BAD_READ, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49BV512", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49BV512, |
| .total_size = 64, |
| .page_size = 64, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49F002(N)", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49F002N, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {96 * 1024, 1}, |
| {128 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49F002(N)T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49F002NT, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {128 * 1024, 1}, |
| {96 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49(H)F010", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49F010, |
| .total_size = 128, |
| .page_size = 0, /* unused */ |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_at49f, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49F020", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49F020, |
| .total_size = 256, |
| .page_size = 0, /* unused */ |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| /* Chip features an optional permanent write protection |
| * of the first 8 kB. The erase function is the same as |
| * above, but 00000H to 01FFFH will not be erased. |
| * FIXME: add another eraser when partial erasers are |
| * supported. |
| */ |
| }, |
| .printlock = printlock_at49f, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49F040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49F040, |
| .total_size = 512, |
| .page_size = 0, /* unused */ |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| /* Chip features an optional permanent write protection |
| * of the first 16 kB. The erase function is the same as |
| * above, but 00000H to 03FFFH will not be erased. |
| * FIXME: add another eraser when partial erasers are |
| * supported. |
| */ |
| }, |
| .printlock = printlock_at49f, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49F080", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49F080, |
| .total_size = 1024, |
| .page_size = 0, /* unused */ |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| /* Chip features an optional permanent write protection |
| * of the first 16 kB. The erase function is the same as |
| * above, but 00000H to 03FFFH will not be erased. |
| * FIXME: add another eraser when partial erasers are |
| * supported. |
| */ |
| }, |
| .printlock = printlock_at49f, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| /* 'top' version of AT49F080. equal in all aspects but the boot block address */ |
| .vendor = "Atmel", |
| .name = "AT49F080T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49F080T, |
| .total_size = 1024, |
| .page_size = 0, /* unused */ |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| /* Chip features an optional permanent write protection |
| * of the first 16 kB. The erase function is the same as |
| * above, but FC000H to FFFFFH will not be erased. |
| * FIXME: add another eraser when partial erasers are |
| * supported. |
| */ |
| }, |
| .printlock = printlock_at49f, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "AT49LH002", |
| .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ |
| .manufacture_id = ATMEL_ID, |
| .model_id = ATMEL_AT49LH002, |
| .total_size = 256, |
| .page_size = 0, /* unused */ |
| .feature_bits = FEATURE_REGISTERMAP, /* TODO: LPC OK too? */ |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, /* TODO: 0xff cmd not documented? */ |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, { |
| .eraseblocks = { |
| {64 * 1024, 4}, |
| }, |
| .block_erase = NULL, /* TODO: Implement. */ |
| }, |
| }, |
| .printlock = NULL, /* TODO */ |
| .unlock = NULL, /* unlock_82802ab() not correct(?) */ |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Catalyst", |
| .name = "CAT28F512", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = CATALYST_ID, |
| .model_id = CATALYST_CAT28F512, |
| .total_size = 64, |
| .page_size = 0, /* unused */ |
| .feature_bits = 0, |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, /* FIXME! */ |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = NULL, /* TODO */ |
| }, |
| }, |
| .write = NULL, /* TODO */ |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Bright", |
| .name = "BM29F040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = BRIGHT_ID, |
| .model_id = BRIGHT_BM29F040, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "EMST", |
| .name = "F49B002UA", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = EMST_ID, |
| .model_id = EMST_F49B002UA, |
| .total_size = 256, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {128 * 1024, 1}, |
| {96 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "EMST", |
| .name = "F25L008A", |
| .bustype = BUS_SPI, |
| .manufacture_id = EMST_ID, |
| .model_id = EMST_F25L008A, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EITHER, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_1, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B05", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B05, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B05T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B05, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B10", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B10, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 3}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B10T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B10, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {32 * 1024, 3}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B20", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B20, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3} |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B20T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B20, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B40", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B40, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 7} |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B40T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B40, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 7}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B80", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B80, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 15} |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B80T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B80, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 15}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B16", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B16, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 31}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B16T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B16, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 31}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B32", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B32, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 63}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B32T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B32, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 63}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B64", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B64, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| {16 * 1024, 1}, |
| {32 * 1024, 1}, |
| {64 * 1024, 127}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25B64T", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25B64, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 127}, |
| {32 * 1024, 1}, |
| {16 * 1024, 1}, |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F05", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F05, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 16} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {32 * 1024, 2} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F10", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F10, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F20", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F20, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F40", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F40, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F80", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F80, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F16", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F16, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F32", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F32, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25F64", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25F32, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25Q40", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25Q40, |
| .total_size = 512, |
| .page_size = 256, |
| /* OTP: 256B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25Q80(A)", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25Q80, |
| .total_size = 1024, |
| .page_size = 256, |
| /* OTP: 256B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| /* Note: EN25D16 is an evil twin which shares the model ID |
| but has different write protection capabilities */ |
| .vendor = "Eon", |
| .name = "EN25Q16", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25Q16, |
| .total_size = 2048, |
| .page_size = 256, |
| /* OTP: D16 512B/Q16 128B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| /* not supported by Q16 version */ |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25Q32(A/B)", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25Q32, |
| .total_size = 4096, |
| .page_size = 256, |
| /* OTP: 512B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25Q64", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25Q64, |
| .total_size = 8192, |
| .page_size = 256, |
| /* OTP: 512B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25Q128", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25Q128, |
| .total_size = 16384, |
| .page_size = 256, |
| /* OTP: 512B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 4096} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 256} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25QH16", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25QH16, |
| .total_size = 2048, |
| .page_size = 256, |
| /* supports SFDP */ |
| /* OTP: 512B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 2048, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 2048, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN25QH32", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = EON_EN25QH32, |
| .total_size = 4096, |
| .page_size = 256, |
| /* supports SFDP */ |
| /* OTP: 512B total; enter 0x3A */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 4096, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 4096, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN29F010", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = EON_ID, |
| .model_id = EON_EN29F010, |
| .total_size = 128, |
| .page_size = 128, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {16 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, |
| { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN29F002(A)(N)B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = EON_ID, |
| .model_id = EON_EN29F002B, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN29F002(A)(N)T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = EON_ID, |
| .model_id = EON_EN29F002T, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "EN29LV640B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = EON_ID, |
| .model_id = EON_EN29LV640B, |
| .total_size = 8192, |
| .page_size = 8192, |
| .feature_bits = 0, |
| .tested = TEST_OK_PREW, |
| .probe = probe_en29lv640b, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {8 * 1024, 8}, |
| {64 * 1024, 127}, |
| }, |
| .block_erase = block_erase_en29lv640b, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = block_erase_chip_en29lv640b, |
| }, |
| }, |
| .write = write_en29lv640b, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Fujitsu", |
| .name = "MBM29F004BC", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = FUJITSU_ID, |
| .model_id = FUJITSU_MBM29F004BC, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 7}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = NULL, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Fujitsu", |
| .name = "MBM29F004TC", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = FUJITSU_ID, |
| .model_id = FUJITSU_MBM29F004TC, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 7}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = NULL, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ |
| .vendor = "Fujitsu", |
| .name = "MBM29F400BC", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = FUJITSU_ID, |
| .model_id = FUJITSU_MBM29F400BC, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_m29f400bt, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 7}, |
| }, |
| .block_erase = block_erase_m29f400bt, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = block_erase_chip_m29f400bt, |
| }, |
| }, |
| .write = write_m29f400bt, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "Fujitsu", |
| .name = "MBM29F400TC", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = FUJITSU_ID, |
| .model_id = FUJITSU_MBM29F400TC, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_m29f400bt, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 7}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = block_erase_m29f400bt, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = block_erase_chip_m29f400bt, |
| }, |
| }, |
| .write = write_m29f400bt, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25Q20", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25Q20, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 8} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25Q40", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25Q40, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25Q80", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25Q80, |
| .total_size = 1024, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25Q16", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25Q16, |
| .total_size = 2048, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25Q32", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25Q32, |
| .total_size = 4096, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 128} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25Q64", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25Q64, |
| .total_size = 8192, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 256} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25Q128", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25Q128, |
| .total_size = 16384, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 4096} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 512} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 256} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "GigaDevice", |
| .name = "GD25LQ32", |
| .bustype = BUS_SPI, |
| .manufacture_id = GIGADEVICE_ID, |
| .model_id = GIGADEVICE_GD25LQ32, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 128} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {1700, 1950}, |
| }, |
| |
| { |
| .vendor = "Hyundai", |
| .name = "HY29F002T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = HYUNDAI_ID, |
| .model_id = HYUNDAI_HY29F002T, |
| .total_size = 256, |
| .page_size = 256 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "Hyundai", |
| .name = "HY29F002B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = HYUNDAI_ID, |
| .model_id = HYUNDAI_HY29F002B, |
| .total_size = 256, |
| .page_size = 256 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "Hyundai", |
| .name = "HY29F040A", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = HYUNDAI_ID, |
| .model_id = HYUNDAI_HY29F040A, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F001BN/BX-B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F001B, |
| .total_size = 128, |
| .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| {112 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F001BN/BX-T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F001T, |
| .total_size = 128, |
| .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {112 * 1024, 1}, |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F002BC/BL/BV/BX-T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F002T, |
| .total_size = 256, |
| .page_size = 256 * 1024, |
| .tested = TEST_OK_PRE, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {128 * 1024, 1}, |
| {96 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F008S3/S5/SC", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F004S3, |
| .total_size = 512, |
| .page_size = 256, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .unlock = unlock_28f004s5, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F004B5/BE/BV/BX-B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F004B, |
| .total_size = 512, |
| .page_size = 128 * 1024, /* maximal block size */ |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {96 * 1024, 1}, |
| {128 * 1024, 3}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F004B5/BE/BV/BX-T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F004T, |
| .total_size = 512, |
| .page_size = 128 * 1024, /* maximal block size */ |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {128 * 1024, 3}, |
| {96 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F400BV/BX/CE/CV-B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F400B, |
| .total_size = 512, |
| .page_size = 128 * 1024, /* maximal block size */ |
| .feature_bits = FEATURE_ADDR_SHIFTED, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {96 * 1024, 1}, |
| {128 * 1024, 3}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "28F400BV/BX/CE/CV-T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_28F400T, |
| .total_size = 512, |
| .page_size = 128 * 1024, /* maximal block size */ |
| .feature_bits = FEATURE_ADDR_SHIFTED, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {128 * 1024, 3}, |
| {96 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "82802AB", |
| .bustype = BUS_FWH, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_82802AB, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .unlock = unlock_82802ab, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Intel", |
| .name = "82802AC", |
| .bustype = BUS_FWH, |
| .manufacture_id = INTEL_ID, |
| .model_id = INTEL_82802AC, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PR, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = erase_block_82802ab, |
| }, |
| }, |
| .unlock = unlock_82802ab, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L512", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L512, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 16} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L1005", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L1005, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L2005", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L2005, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L4005", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L4005, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L8005", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L8005, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L1605", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L1605, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, /* This erase function has 64k blocksize for eLiteFlash */ |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, /* Not supported in MX25L1605 (eLiteFlash) and MX25L1605D */ |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L1635D", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L1635D, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L1635E", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L1635E, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L3205", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L3205, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L3235D", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L3235D, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L6405", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L6405, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX25L12805", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX25L12805, |
| .total_size = 16384, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 4096} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 256} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX29F001B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX29F001B, |
| .total_size = 128, |
| .page_size = 32 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {8 * 1024, 1}, |
| {4 * 1024, 2}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX29F001T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX29F001T, |
| .total_size = 128, |
| .page_size = 32 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 1}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {4 * 1024, 2}, |
| {8 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX29F002(N)B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX29F002B, |
| .total_size = 256, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX29F002(N)T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX29F002T, |
| .total_size = 256, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX29F040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX29F040, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "MX29LV040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = MACRONIX_MX29LV040, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8}, }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "MoselVitelic", |
| .name = "V29C51000B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = MVC_V29C51000B, |
| .total_size = 64, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "MoselVitelic", |
| .name = "V29C51000T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = MVC_V29C51000T, |
| .total_size = 64, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "MoselVitelic", |
| .name = "V29C51400B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = MVC_V29C51400B, |
| .total_size = 512, |
| .page_size = 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "MoselVitelic", |
| .name = "V29C51400T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = MVC_V29C51400T, |
| .total_size = 512, |
| .page_size = 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "MoselVitelic", |
| .name = "V29LC51000", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = MVC_V29LC51000, |
| .total_size = 64, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "MoselVitelic", |
| .name = "V29LC51001", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = MVC_V29LC51001, |
| .total_size = 128, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 256} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "MoselVitelic", |
| .name = "V29LC51002", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = MVC_V29LC51002, |
| .total_size = 256, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Numonyx", |
| .name = "M25PE10", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PE10, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Numonyx", |
| .name = "M25PE20", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PE20, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Numonyx", |
| .name = "M25PE40", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PE40, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Numonyx", |
| .name = "M25PE80", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PE80, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Numonyx", |
| .name = "M25PE16", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PE16, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Numonyx", |
| .name = "N25Q064", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_N25Q064, |
| .total_size = 8192, |
| .page_size = 256, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm25LV010", |
| .bustype = BUS_SPI, |
| .manufacture_id = PMC_ID, |
| .model_id = PMC_PM25LV010, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_d7, |
| }, { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm25LV016B", |
| .bustype = BUS_SPI, |
| .manufacture_id = PMC_ID, |
| .model_id = PMC_PM25LV016B, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_d7, |
| }, { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm25LV020", |
| .bustype = BUS_SPI, |
| .manufacture_id = PMC_ID, |
| .model_id = PMC_PM25LV020, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = spi_block_erase_d7, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm25LV040", |
| .bustype = BUS_SPI, |
| .manufacture_id = PMC_ID, |
| .model_id = PMC_PM25LV040, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_d7, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm25LV080B", |
| .bustype = BUS_SPI, |
| .manufacture_id = PMC_ID, |
| .model_id = PMC_PM25LV080B, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_d7, |
| }, { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm25LV512", |
| .bustype = BUS_SPI, |
| .manufacture_id = PMC_ID, |
| .model_id = PMC_PM25LV512, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 16} }, |
| .block_erase = spi_block_erase_d7, |
| }, { |
| .eraseblocks = { {32 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm29F002T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM29F002T, |
| .total_size = 256, |
| .page_size = 8 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {128 * 1024, 1}, |
| {96 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm29F002B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM29F002B, |
| .total_size = 256, |
| .page_size = 8 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {96 * 1024, 1}, |
| {128 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm39LV010", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ |
| .total_size = 128, |
| .page_size = 4096, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 2} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm39LV020", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM39LV020, |
| .total_size = 256, |
| .page_size = 4096, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm39LV040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM39LV040, |
| .total_size = 512, |
| .page_size = 4096, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm39LV512", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM39LV512, |
| .total_size = 64, |
| .page_size = 4096, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 16} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm49FL002", |
| .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM49FL002, |
| .total_size = 256, |
| .page_size = 16 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {16 * 1024, 16} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .unlock = unlock_49fl00x, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "Pm49FL004", |
| .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ |
| .manufacture_id = PMC_ID_NOPREFIX, |
| .model_id = PMC_PM49FL004, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .unlock = unlock_49fl00x, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Sanyo", |
| .name = "LF25FW203A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SANYO_ID, |
| .model_id = SANYO_LE25FW203A, |
| .total_size = 2048, |
| .page_size = 256, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "Sharp", |
| .name = "LH28F008BJT-BTLZ1", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SHARP_ID, |
| .model_id = SHARP_LH28F008BJxxPB, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .tested = TEST_OK_PREW, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {8 * 1024, 8}, |
| {64 * 1024, 15} |
| }, |
| .block_erase = erase_block_82802ab, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_sector_49lfxxxc, |
| } |
| }, |
| .unlock = unlock_lh28f008bjt, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Sharp", |
| .name = "LHF00L04", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = SHARP_ID, |
| .model_id = SHARP_LHF00L04, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 15}, |
| {8 * 1024, 8} |
| }, |
| .block_erase = erase_block_82802ab, |
| }, { |
| .eraseblocks = { |
| {1024 * 1024, 1} |
| }, |
| .block_erase = NULL, /* 30 D0, only in A/A mux mode */ |
| }, |
| }, |
| .unlock = unlock_82802ab, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Spansion", |
| .name = "S25FL004A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SPANSION_ID, |
| .model_id = SPANSION_S25FL004A, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Spansion", |
| .name = "S25FL008A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SPANSION_ID, |
| .model_id = SPANSION_S25FL008A, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PRE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Spansion", |
| .name = "S25FL016A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SPANSION_ID, |
| .model_id = SPANSION_S25FL016A, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Spansion", |
| .name = "S25FL032A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SPANSION_ID, |
| .model_id = SPANSION_S25FL032A, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Spansion", |
| .name = "S25FL064A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SPANSION_ID, |
| .model_id = SPANSION_S25FL064A, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25LF040A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF040_REMS, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_res2, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ |
| .read = spi_chip_read, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25LF080A", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF080_REMS, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_res2, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ |
| .read = spi_chip_read, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF010", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF010_REMS, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rems, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_1, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF016B", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF016B, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_aai_write, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF032B", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF032B, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 128} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_aai_write, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF064C", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF064C, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 256} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF040", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF040_REMS, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rems, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF040B", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF040B, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_aai_write, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF040B.REMS", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF040B_REMS, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rems, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 16} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_aai_write, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST25VF080B", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST25VF080B, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_EWSR, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| }, |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_aai_write, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST28SF040A", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST28SF040, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = 0, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst28sf040.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {128, 4096} }, |
| .block_erase = erase_sector_28sf040, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_28sf040, |
| } |
| }, |
| .unlock = unprotect_28sf040, |
| .write = write_28sf040, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST29EE010", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST29EE010, |
| .total_size = 128, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST29LE010", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST29LE010, |
| .total_size = 128, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST29EE020A", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST29EE020A, |
| .total_size = 256, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST29LE020", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST29LE020, |
| .total_size = 256, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39SF512", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39SF512, |
| .total_size = 64, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 16} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39SF010A", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39SF010, |
| .total_size = 128, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39SF020A", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39SF020, |
| .total_size = 256, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39SF040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39SF040, |
| .total_size = 512, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39VF512", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39VF512, |
| .total_size = 64, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 16} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39VF010", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39VF010, |
| .total_size = 128, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39VF020", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39VF020, |
| .total_size = 256, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39VF040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39VF040, |
| .total_size = 512, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST39VF080", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST39VF080, |
| .total_size = 1024, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF002A/B", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF002A, |
| .total_size = 256, |
| .page_size = 16 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {16 * 1024, 16} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ |
| } |
| }, |
| .printlock = printlock_sst_fwhub, |
| .unlock = unlock_sst_fwhub, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF003A/B", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF003A, |
| .total_size = 384, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 96} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 6} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {384 * 1024, 1} }, |
| .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ |
| } |
| }, |
| .printlock = printlock_sst_fwhub, |
| .unlock = unlock_sst_fwhub, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) |
| * and is only honored for 64k block erase, but not 4k sector erase. |
| */ |
| .vendor = "SST", |
| .name = "SST49LF004A/B", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF004A, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ |
| }, |
| }, |
| .printlock = printlock_sst_fwhub, |
| .unlock = unlock_sst_fwhub, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF004C", |
| .bustype = BUS_FWH, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF004C, |
| .total_size = 512, |
| .page_size = 4 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_49lfxxxc, |
| }, { |
| .eraseblocks = { |
| {64 * 1024, 7}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_49lfxxxc, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF008A", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF008A, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ |
| } |
| }, |
| .printlock = printlock_sst_fwhub, |
| .unlock = unlock_sst_fwhub, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF008C", |
| .bustype = BUS_FWH, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF008C, |
| .total_size = 1024, |
| .page_size = 4 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = erase_sector_49lfxxxc, |
| }, { |
| .eraseblocks = { |
| {64 * 1024, 15}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_49lfxxxc, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF016C", |
| .bustype = BUS_FWH, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF016C, |
| .total_size = 2048, |
| .page_size = 4 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = erase_sector_49lfxxxc, |
| }, { |
| .eraseblocks = { |
| {64 * 1024, 31}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_49lfxxxc, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF020", |
| .bustype = BUS_LPC, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF020, |
| .total_size = 256, |
| .page_size = 16 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {16 * 1024, 16} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = NULL, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF020A", |
| .bustype = BUS_LPC, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF020A, |
| .total_size = 256, |
| .page_size = 4 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {16 * 1024, 16} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = NULL, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF040", |
| .bustype = BUS_LPC, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF040, |
| .total_size = 512, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150 ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = NULL, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF040B", |
| .bustype = BUS_LPC, /* A/A Mux */ |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 1, /* 150ns */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = NULL, |
| } |
| }, |
| .unlock = unlock_82802ab, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF080A", |
| .bustype = BUS_LPC, /* A/A Mux */ |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF080A, |
| .total_size = 1024, |
| .page_size = 4096, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = NULL, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "SST49LF160C", |
| .bustype = BUS_LPC, |
| .manufacture_id = SST_ID, |
| .model_id = SST_SST49LF160C, |
| .total_size = 2048, |
| .page_size = 4 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PRE, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = erase_sector_49lfxxxc, |
| }, { |
| .eraseblocks = { |
| {64 * 1024, 31}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_49lfxxxc, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P05-A", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P05A, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {32 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| /* The ST M25P05 is a bit of a problem. It has the same ID as the |
| * ST M25P05-A in RES mode, but supports only 128 byte writes instead |
| * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 |
| * only is successful if RDID does not work. |
| */ |
| { |
| .vendor = "ST", |
| .name = "M25P05", |
| .bustype = BUS_SPI, |
| .manufacture_id = 0, /* Not used. */ |
| .model_id = ST_M25P05_RES, |
| .total_size = 64, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_res1, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {32 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_1, /* 128 */ |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P10-A", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P10A, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PRE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| /* The ST M25P10 has the same problem as the M25P05. */ |
| { |
| .vendor = "ST", |
| .name = "M25P10", |
| .bustype = BUS_SPI, |
| .manufacture_id = 0, /* Not used. */ |
| .model_id = ST_M25P10_RES, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_res1, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {32 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_1, /* 128 */ |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P20", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P20, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", /* Numonyx */ |
| .name = "M25P40", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P40, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P40-old", |
| .bustype = BUS_SPI, |
| .manufacture_id = 0, /* Not used. */ |
| .model_id = ST_M25P40_RES, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_res1, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P80", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P80, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P16", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P16, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PR, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P32", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P32, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P64", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P64, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25P128", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25P128, |
| .total_size = 16384, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {256 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25PX16", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PX16, |
| .total_size = 2048, |
| .page_size = 256, |
| /* OTP: 64B total; read 0x4B; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 512 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25PX32", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PX32, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PRE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 1024 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M25PX64", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M25PX64, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PRE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { { 4 * 1024, 2048 } }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M29F002B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29F002B, |
| .total_size = 256, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M29F002T/NT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29F002T, |
| .total_size = 256, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M29F040B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29F040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8}, }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ |
| .vendor = "ST", |
| .name = "M29F400BB", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29F400BB, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_m29f400bt, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 7}, |
| }, |
| .block_erase = block_erase_m29f400bt, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = block_erase_chip_m29f400bt, |
| } |
| }, |
| .write = write_m29f400bt, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| { |
| /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ |
| .vendor = "ST", |
| .name = "M29F400BT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29F400BT, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_m29f400bt, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (m29f400bt.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 7}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = block_erase_m29f400bt, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = block_erase_chip_m29f400bt, |
| } |
| }, |
| .write = write_m29f400bt, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M29W010B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29W010B, |
| .total_size = 128, |
| .page_size = 16 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {16 * 1024, 8}, }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M29W040B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29W040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8}, }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M29W512B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = ST_ID, |
| .model_id = ST_M29W512B, |
| .total_size = 64, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FLW040A", |
| .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FLW040A, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 16}, /* sector */ |
| {64 * 1024, 5}, /* block */ |
| {4 * 1024, 16}, /* sector */ |
| {4 * 1024, 16}, /* sector */ |
| }, |
| .block_erase = NULL, |
| }, { |
| .eraseblocks = { {64 * 1024, 8}, }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FLW040B", |
| .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FLW040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 16}, /* sector */ |
| {4 * 1024, 16}, /* sector */ |
| {64 * 1024, 5}, /* block */ |
| {4 * 1024, 16}, /* sector */ |
| }, |
| .block_erase = NULL, |
| }, { |
| .eraseblocks = { {64 * 1024, 8}, }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FLW080A", |
| .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FLW080A, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PRE, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 16}, /* sector */ |
| {64 * 1024, 13}, /* block */ |
| {4 * 1024, 16}, /* sector */ |
| {4 * 1024, 16}, /* sector */ |
| }, |
| .block_erase = NULL, |
| }, { |
| .eraseblocks = { {64 * 1024, 16}, }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FLW080B", |
| .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FLW080B, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_FIXME, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 16}, /* sector */ |
| {4 * 1024, 16}, /* sector */ |
| {64 * 1024, 13}, /* block */ |
| {4 * 1024, 16}, /* sector */ |
| }, |
| .block_erase = NULL, |
| }, { |
| .eraseblocks = { {64 * 1024, 16}, }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FW002", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FW002, |
| .total_size = 256, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FW016", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FW016, |
| .total_size = 2048, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 32}, }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FW040", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FW040, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PR, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8}, }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50FW080", |
| .bustype = BUS_FWH, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50FW080, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16}, }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "M50LPW116", |
| .bustype = BUS_LPC, /* A/A Mux */ |
| .manufacture_id = ST_ID, |
| .model_id = ST_M50LPW116, |
| .total_size = 2048, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP, |
| .tested = TEST_UNTESTED, |
| .probe = probe_82802ab, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {4 * 1024, 16}, |
| {64 * 1024, 30}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_block_82802ab, |
| } |
| }, |
| .unlock = unlock_stm50flw0x0x, |
| .write = write_82802ab, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{F,S,V}29C51001B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C51001B, |
| .total_size = 128, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 256} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{F,S,V}29C51001T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C51001T, |
| .total_size = 128, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 256} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{F,S,V}29C51002B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C51002B, |
| .total_size = 256, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{F,S,V}29C51002T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C51002T, |
| .total_size = 256, |
| .page_size = 512, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{F,S,V}29C51004B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C51004B, |
| .total_size = 512, |
| .page_size = 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{F,S,V}29C51004T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C51004T, |
| .total_size = 512, |
| .page_size = 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{S,V}29C31004B", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C31004B, |
| .total_size = 512, |
| .page_size = 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "SyncMOS/MoselVitelic", |
| .name = "{S,V}29C31004T", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = SYNCMOS_MVC_ID, |
| .model_id = SM_MVC_29C31004T, |
| .total_size = 512, |
| .page_size = 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {1024, 512} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "TI", |
| .name = "TMS29F002RB", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = TI_OLD_ID, |
| .model_id = TI_TMS29F002RB, |
| .total_size = 256, |
| .page_size = 16384, /* Non-uniform sectors */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {16 * 1024, 1}, |
| {8 * 1024, 2}, |
| {32 * 1024, 1}, |
| {64 * 1024, 3}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "TI", |
| .name = "TMS29F002RT", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = TI_OLD_ID, |
| .model_id = TI_TMS29F002RT, |
| .total_size = 256, |
| .page_size = 16384, /* Non-uniform sectors */ |
| .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| }, |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25Q80", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25Q80, |
| .total_size = 1024, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 32} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25Q16", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25Q16, |
| .total_size = 2048, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25Q32", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25Q32, |
| .total_size = 4096, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 128} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25Q64", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25Q64, |
| .total_size = 8192, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 256} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25Q128", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25Q128, |
| .total_size = 16384, |
| .page_size = 256, |
| /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42 */ |
| .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 4096} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 512} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 256} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {16 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25X10", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25X10, |
| .total_size = 128, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 32} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 2} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25X20", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25X20, |
| .total_size = 256, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_UNTESTED, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 64} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 4} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25X40", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25X40, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25X80", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25X80, |
| .total_size = 1024, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 256} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25X16", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25X16, |
| .total_size = 2048, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 512} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 64} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 32} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {2 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25X32", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25X32, |
| .total_size = 4096, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 1024} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 128} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 64} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {4 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W25X64", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = WINBOND_NEX_W25X64, |
| .total_size = 8192, |
| .page_size = 256, |
| .feature_bits = FEATURE_WRSR_WREN, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 2048} }, |
| .block_erase = spi_block_erase_20, |
| }, { |
| .eraseblocks = { {32 * 1024, 256} }, |
| .block_erase = spi_block_erase_52, |
| }, { |
| .eraseblocks = { {64 * 1024, 128} }, |
| .block_erase = spi_block_erase_d8, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_60, |
| }, { |
| .eraseblocks = { {8 * 1024 * 1024, 1} }, |
| .block_erase = spi_block_erase_c7, |
| } |
| }, |
| .unlock = spi_disable_blockprotect, |
| .write = spi_chip_write_256, |
| .read = spi_chip_read, |
| .voltage = {2700, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W29C010, |
| .total_size = 128, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PRE, |
| .probe = probe_w29ee011, |
| .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| }, |
| |
| {/* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ |
| .vendor = "Winbond", |
| .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W29C010, |
| .total_size = 128, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, /* used datasheet for the W29C011A */ |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {128 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W29C020(C)/W29C022", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W29C020, |
| .total_size = 256, |
| .page_size = 128, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W29C040/P", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W29C040, |
| .total_size = 512, |
| .page_size = 256, |
| .feature_bits = FEATURE_LONG_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39L040", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39L040, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PR, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39l040, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V040A", |
| .bustype = BUS_LPC, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V040A, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v040a, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V040B", |
| .bustype = BUS_LPC, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v040b, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V040C", |
| .bustype = BUS_LPC, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V040C, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v040c, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V040FA", |
| .bustype = BUS_FWH, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V040FA, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {4 * 1024, 128} }, |
| .block_erase = erase_block_jedec, |
| }, { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v040fa, |
| .unlock = unlock_sst_fwhub, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V040FB", |
| .bustype = BUS_FWH, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V040B, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v040fb, |
| .unlock = unlock_w39v040fb, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program */ |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V040FC", |
| .bustype = BUS_FWH, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V040C, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v040fc, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program */ |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V080A", |
| .bustype = BUS_LPC, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V080A, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16} }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v080a, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W49F002U/N", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W49F002U, |
| .total_size = 256, |
| .page_size = 128, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {128 * 1024, 1}, |
| {96 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W49F020", |
| .bustype = BUS_PARALLEL, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W49F020, |
| .total_size = 256, |
| .page_size = 128, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PROBE, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {4500, 5500}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W49V002A", |
| .bustype = BUS_LPC, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W49V002A, |
| .total_size = 256, |
| .page_size = 128, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W49V002FA", |
| .bustype = BUS_FWH, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W49V002FA, |
| .total_size = 256, |
| .page_size = 128, |
| .feature_bits = FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { |
| {64 * 1024, 3}, |
| {32 * 1024, 1}, |
| {8 * 1024, 2}, |
| {16 * 1024, 1}, |
| }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {256 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V080FA", |
| .bustype = BUS_FWH, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V080FA, |
| .total_size = 1024, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_OK_PREW, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 16}, }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {1024 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v080fa, |
| .unlock = unlock_w39v080fa, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program */ |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "W39V080FA (dual mode)", |
| .bustype = BUS_FWH, |
| .manufacture_id = WINBOND_ID, |
| .model_id = WINBOND_W39V080FA_DM, |
| .total_size = 512, |
| .page_size = 64 * 1024, |
| .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, |
| .tested = TEST_UNTESTED, |
| .probe = probe_jedec, |
| .probe_timing = 10, |
| .block_erasers = |
| { |
| { |
| .eraseblocks = { {64 * 1024, 8}, }, |
| .block_erase = erase_sector_jedec, |
| }, { |
| .eraseblocks = { {512 * 1024, 1} }, |
| .block_erase = erase_chip_block_jedec, |
| } |
| }, |
| .printlock = printlock_w39v080fa_dual, |
| .write = write_jedec_1, |
| .read = read_memmapped, |
| .voltage = {3000, 3600}, /* Also has 12V fast program */ |
| }, |
| |
| { |
| .vendor = "Unknown", |
| .name = "SFDP-capable chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = GENERIC_MANUF_ID, |
| .model_id = SFDP_DEVICE_ID, |
| /* We present our own "report this" text hence we do not |
| * want the default "This flash part has status UNTESTED..." |
| * text to be printed. */ |
| .tested = TEST_OK_PREW, |
| .probe = probe_spi_sfdp, |
| .unlock = spi_disable_blockprotect, /* is this safe? */ |
| .read = spi_chip_read, |
| /* FIXME: some vendor extensions define this */ |
| .voltage = {0}, |
| /* Everything below will be set by the probing function. */ |
| .write = NULL, |
| .total_size = 0, |
| .page_size = 0, |
| .feature_bits = 0, |
| .block_erasers = {}, |
| }, |
| |
| { |
| .vendor = "Programmer", |
| .name = "Opaque flash chip", |
| .bustype = BUS_PROG, |
| .manufacture_id = PROGMANUF_ID, |
| .model_id = PROGDEV_ID, |
| .total_size = 0, |
| .page_size = 256, |
| /* probe is assumed to work, rest will be filled in by probe */ |
| .tested = TEST_OK_PROBE, |
| .probe = probe_opaque, |
| /* eraseblock sizes will be set by the probing function */ |
| .block_erasers = |
| { |
| { |
| .block_erase = erase_opaque, |
| } |
| }, |
| .write = write_opaque, |
| .read = read_opaque, |
| }, |
| |
| { |
| .vendor = "AMIC", |
| .name = "unknown AMIC SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = AMIC_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid4, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "Atmel", |
| .name = "unknown Atmel SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = ATMEL_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "Eon", |
| .name = "unknown Eon SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = EON_ID_NOPREFIX, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "Macronix", |
| .name = "unknown Macronix SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = MACRONIX_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "PMC", |
| .name = "unknown PMC SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = PMC_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "SST", |
| .name = "unknown SST SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = SST_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "ST", |
| .name = "unknown ST SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = ST_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "Sanyo", |
| .name = "unknown Sanyo SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = SANYO_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "Winbond", |
| .name = "unknown Winbond (ex Nexcom) SPI chip", |
| .bustype = BUS_SPI, |
| .manufacture_id = WINBOND_NEX_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .probe_timing = TIMING_ZERO, |
| .write = NULL, |
| .read = NULL, |
| }, |
| |
| { |
| .vendor = "Generic", |
| .name = "unknown SPI chip (RDID)", |
| .bustype = BUS_SPI, |
| .manufacture_id = GENERIC_MANUF_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rdid, |
| .write = NULL, |
| }, |
| |
| { |
| .vendor = "Generic", |
| .name = "unknown SPI chip (REMS)", |
| .bustype = BUS_SPI, |
| .manufacture_id = GENERIC_MANUF_ID, |
| .model_id = GENERIC_DEVICE_ID, |
| .total_size = 0, |
| .page_size = 256, |
| .tested = TEST_BAD_PREW, |
| .probe = probe_spi_rems, |
| .write = NULL, |
| }, |
| |
| { NULL } |
| }; |