Document the newly supported IBM x3455 board and the now-supported Broadcom HT-1000 chipset
Corresponding to flashrom svn r119 and coreboot v2 svn r2713.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/README b/README
index b272a86..0c56cc1 100644
--- a/README
+++ b/README
@@ -53,6 +53,7 @@
* IWILL DK8-HTX: use -m iwill:dk8_htx
* Agami Aruma: use -m AGAMI:ARUMA
* ASUS P5A: use -m asus:p5a
+* IBM x3455: use -m ibm:x3455
ROM Layout Support
@@ -153,6 +154,7 @@
AMD Geode SC1100
AMD AMD-8111
ATI SB400
+Broadcom HT-1000
Intel ICH0-ICH8 (all variations)
Intel PIIX4/PIIX4E/PIIX4M
NVIDIA CK804
diff --git a/board_enable.c b/board_enable.c
index 852da40..416d60c 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -250,10 +250,10 @@
{
uint8_t byte;
- /* Set GPIO lines in HT1000 southbridge */
+ /* Set GPIO lines in the Broadcom HT-1000 southbridge. */
outb(0x45, 0xcd6);
byte = inb(0xcd7);
- outb(byte|0x20, 0xcd7);
+ outb(byte | 0x20, 0xcd7);
return 0;
}
diff --git a/chipset_enable.c b/chipset_enable.c
index 3e53244..b4deee3 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -387,12 +387,11 @@
}
-
static int enable_flash_ht1000(struct pci_dev *dev, char *name)
{
- unsigned char byte;
+ uint8_t byte;
- /* Set the 4MB enable bit */
+ /* Set the 4MB enable bit. */
byte = pci_read_byte(dev, 0x41);
byte |= 0x0e;
pci_write_byte(dev, 0x41, byte);
@@ -462,7 +461,7 @@
{0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, /* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
- {0x1166, 0x0205, "BCM HT1000", enable_flash_ht1000},
+ {0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000},
};
/*