diff --git a/README b/README
index b272a86..0c56cc1 100644
--- a/README
+++ b/README
@@ -53,6 +53,7 @@
 * IWILL DK8-HTX: use -m iwill:dk8_htx
 * Agami Aruma: use -m AGAMI:ARUMA
 * ASUS P5A: use -m asus:p5a
+* IBM x3455: use -m ibm:x3455
 
 
 ROM Layout Support
@@ -153,6 +154,7 @@
 AMD Geode SC1100
 AMD AMD-8111
 ATI SB400
+Broadcom HT-1000
 Intel ICH0-ICH8 (all variations)
 Intel PIIX4/PIIX4E/PIIX4M
 NVIDIA CK804
diff --git a/board_enable.c b/board_enable.c
index 852da40..416d60c 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -250,10 +250,10 @@
 {
 	uint8_t byte;
 
-	/* Set GPIO lines in HT1000 southbridge */
+	/* Set GPIO lines in the Broadcom HT-1000 southbridge. */
 	outb(0x45, 0xcd6);
 	byte = inb(0xcd7);
-	outb(byte|0x20, 0xcd7);
+	outb(byte | 0x20, 0xcd7);
 
 	return 0;
 }
diff --git a/chipset_enable.c b/chipset_enable.c
index 3e53244..b4deee3 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -387,12 +387,11 @@
 
 }
 
-
 static int enable_flash_ht1000(struct pci_dev *dev, char *name)
 {
-	unsigned char byte;
+	uint8_t byte;
 
-	/* Set the 4MB enable bit */
+	/* Set the 4MB enable bit. */
 	byte = pci_read_byte(dev, 0x41);
 	byte |= 0x0e;
 	pci_write_byte(dev, 0x41, byte);
@@ -462,7 +461,7 @@
 
 	{0x1002, 0x4377, "ATI SB400", enable_flash_sb400},	/* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */
 
-	{0x1166, 0x0205, "BCM HT1000", enable_flash_ht1000},
+	{0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000},
 };
 
 /*