blob: 455107e01a1cab5f77d6295b9de63a295d34c753 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2000 Silicon Integrated System Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Adapted from the Intel FW hub stuff for 82802ax parts. */
#include <stdio.h>
#include "flash.h"
// I need that Berkeley bit-map printer
void print_sst_fwhub_status(uint8_t status)
{
printf("%s", status & 0x80 ? "Ready:" : "Busy:");
printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:");
printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:");
printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:");
printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:");
printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:");
printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:");
}
/* probe_jedec works fine for probing */
int probe_sst_fwhub(struct flashchip *flash)
{
if (probe_jedec(flash) == 0)
return 0;
map_flash_registers(flash);
return 1;
}
int erase_sst_fwhub_block(struct flashchip *flash, int offset)
{
volatile uint8_t *wrprotect = flash->virtual_registers + offset + 2;
// clear write protect
*(wrprotect) = 0;
erase_block_jedec(flash->virtual_memory, offset);
toggle_ready_jedec(flash->virtual_memory);
return 0;
}
int erase_sst_fwhub(struct flashchip *flash)
{
int i;
unsigned int total_size = flash->total_size * 1024;
volatile uint8_t *bios = flash->virtual_memory;
for (i = 0; i < total_size; i += flash->page_size)
erase_sst_fwhub_block(flash, i);
// dumb check if erase was successful.
for (i = 0; i < total_size; i++) {
if (bios[i] != 0xff) {
printf("ERASE FAILED!\n");
return -1;
}
}
return 0;
}
int write_sst_fwhub(struct flashchip *flash, uint8_t *buf)
{
int i;
int total_size = flash->total_size * 1024;
int page_size = flash->page_size;
volatile uint8_t *bios = flash->virtual_memory;
// FIXME: We want block wide erase instead of ironing the whole chip
if (erase_sst_fwhub(flash))
return -1;
printf("Programming page: ");
for (i = 0; i < total_size / page_size; i++) {
printf("%04d at address: 0x%08x", i, i * page_size);
write_sector_jedec(bios, buf + i * page_size,
bios + i * page_size, page_size);
printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
}
printf("\n");
return 0;
}