it87spi.c - flashprog - Gitiles

 /*
  * This file is part of the flashrom project.
  *
  * Copyright (C) 2007, 2008 Carl-Daniel Hailfinger
  * Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl>
  * Copyright (C) 2008 coresystems GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */

 /*
  * Contains the ITE IT87* SPI specific routines
  */

 #include <stdio.h>
 #include <pci/pci.h>
 #include <stdint.h>
 #include <string.h>
 #include "flash.h"
 #include "spi.h"

 #define ITE_SUPERIO_PORT1	0x2e
 #define ITE_SUPERIO_PORT2	0x4e

 uint16_t it8716f_flashport = 0;
 /* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
 int fast_spi = 1;

 /* Generic Super I/O helper functions */
 uint8_t regval(uint16_t port, uint8_t reg)
 {
 	OUTB(reg, port);
 	return INB(port + 1);
 }

 void regwrite(uint16_t port, uint8_t reg, uint8_t val)
 {
 	OUTB(reg, port);
 	OUTB(val, port + 1);
 }

 /* Helper functions for most recent ITE IT87xx Super I/O chips */
 #define CHIP_ID_BYTE1_REG	0x20
 #define CHIP_ID_BYTE2_REG	0x21
 static void enter_conf_mode_ite(uint16_t port)
 {
 	OUTB(0x87, port);
 	OUTB(0x01, port);
 	OUTB(0x55, port);
 	if (port == ITE_SUPERIO_PORT1)
 		OUTB(0x55, port);
 	else
 		OUTB(0xaa, port);
 }

 static void exit_conf_mode_ite(uint16_t port)
 {
 	regwrite(port, 0x02, 0x02);
 }

 static uint16_t find_ite_spi_flash_port(uint16_t port)
 {
 	uint8_t tmp = 0;
 	uint16_t id, flashport = 0;

 	enter_conf_mode_ite(port);

 	id = regval(port, CHIP_ID_BYTE1_REG) << 8;
 	id |= regval(port, CHIP_ID_BYTE2_REG);

 	/* TODO: Handle more IT87xx if they support flash translation */
 	if (0x8716 == id || 0x8718 == id) {
 		/* NOLDN, reg 0x24, mask out lowest bit (suspend) */
 		tmp = regval(port, 0x24) & 0xFE;
 		printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
 		       0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
 		printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
 		       0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
 		printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
 		       0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
 		printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
 		       0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
 		printf("LPC write to serial flash %sabled\n",
 		       (tmp & 1 << 4) ? "en" : "dis");
 		/* If any serial flash segment is enabled, enable writing. */
 		if ((tmp & 0xe) && (!(tmp & 1 << 4))) {
 			printf("Enabling LPC write to serial flash\n");
 			tmp |= 1 << 4;
 			regwrite(port, 0x24, tmp);
 		}
 		printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
 		/* LDN 0x7, reg 0x64/0x65 */
 		regwrite(port, 0x07, 0x7);
 		flashport = regval(port, 0x64) << 8;
 		flashport |= regval(port, 0x65);
 	}
 	exit_conf_mode_ite(port);
 	return flashport;
 }

 int it87xx_probe_spi_flash(const char *name)
 {
 	it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1);

 	if (!it8716f_flashport)
 		it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2);

 	if (it8716f_flashport)
 		flashbus = BUS_TYPE_IT87XX_SPI;

 	return (!it8716f_flashport);
 }

 /*
  * The IT8716F only supports commands with length 1,2,4,5 bytes including
  * command byte and can not read more than 3 bytes from the device.
  *
  * This function expects writearr[0] to be the first byte sent to the device,
  * whereas the IT8716F splits commands internally into address and non-address
  * commands with the address in inverse wire order. That's why the register
  * ordering in case 4 and 5 may seem strange.
  */
 int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt,
 			const unsigned char *writearr, unsigned char *readarr)
 {
 	uint8_t busy, writeenc;
 	int i;

 	do {
 		busy = INB(it8716f_flashport) & 0x80;
 	} while (busy);
 	if (readcnt > 3) {
 		printf("%s called with unsupported readcnt %i.\n",
 		       __FUNCTION__, readcnt);
 		return 1;
 	}
 	switch (writecnt) {
 	case 1:
 		OUTB(writearr[0], it8716f_flashport + 1);
 		writeenc = 0x0;
 		break;
 	case 2:
 		OUTB(writearr[0], it8716f_flashport + 1);
 		OUTB(writearr[1], it8716f_flashport + 7);
 		writeenc = 0x1;
 		break;
 	case 4:
 		OUTB(writearr[0], it8716f_flashport + 1);
 		OUTB(writearr[1], it8716f_flashport + 4);
 		OUTB(writearr[2], it8716f_flashport + 3);
 		OUTB(writearr[3], it8716f_flashport + 2);
 		writeenc = 0x2;
 		break;
 	case 5:
 		OUTB(writearr[0], it8716f_flashport + 1);
 		OUTB(writearr[1], it8716f_flashport + 4);
 		OUTB(writearr[2], it8716f_flashport + 3);
 		OUTB(writearr[3], it8716f_flashport + 2);
 		OUTB(writearr[4], it8716f_flashport + 7);
 		writeenc = 0x3;
 		break;
 	default:
 		printf("%s called with unsupported writecnt %i.\n",
 		       __FUNCTION__, writecnt);
 		return 1;
 	}
 	/*
 	 * Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes.
 	 * Note:
 	 * We can't use writecnt directly, but have to use a strange encoding.
 	 */
 	OUTB(((0x4 + (fast_spi ? 1 : 0)) << 4)
 		| ((readcnt & 0x3) << 2) | (writeenc), it8716f_flashport);

 	if (readcnt > 0) {
 		do {
 			busy = INB(it8716f_flashport) & 0x80;
 		} while (busy);

 		for (i = 0; i < readcnt; i++)
 			readarr[i] = INB(it8716f_flashport + 5 + i);
 	}

 	return 0;
 }

 /* Page size is usually 256 bytes */
 static void it8716f_spi_page_program(int block, uint8_t *buf, uint8_t *bios)
 {
 	int i;

 	spi_write_enable();
 	OUTB(0x06, it8716f_flashport + 1);
 	OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport);
 	for (i = 0; i < 256; i++) {
 		bios[256 * block + i] = buf[256 * block + i];
 	}
 	OUTB(0, it8716f_flashport);
 	/* Wait until the Write-In-Progress bit is cleared.
 	 * This usually takes 1-10 ms, so wait in 1 ms steps.
 	 */
 	while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
 		usleep(1000);
 }

 /*
  * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
  * Program chip using firmware cycle byte programming. (SLOW!)
  */
 int it8716f_over512k_spi_chip_write(struct flashchip *flash, uint8_t *buf)
 {
 	int total_size = 1024 * flash->total_size;
 	int i;

 	fast_spi = 0;

 	spi_disable_blockprotect();
 	for (i = 0; i < total_size; i++) {
 		spi_write_enable();
 		spi_byte_program(i, buf[i]);
 		while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
 			myusec_delay(10);
 	}
 	/* resume normal ops... */
 	OUTB(0x20, it8716f_flashport);

 	return 0;
 }

 /*
  * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
  * Need to read this big flash using firmware cycles 3 byte at a time.
  */
 int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf)
 {
 	int total_size = 1024 * flash->total_size;
 	int i;
 	fast_spi = 0;

 	if (total_size > 512 * 1024) {
 		for (i = 0; i < total_size; i += 3) {
 			int toread = 3;
 			if (total_size - i < toread)
 				toread = total_size - i;
 			spi_nbyte_read(i, buf + i, toread);
 		}
 	} else {
 		memcpy(buf, (const char *)flash->virtual_memory, total_size);
 	}

 	return 0;
 }

 int it8716f_spi_chip_write(struct flashchip *flash, uint8_t *buf)
 {
 	int total_size = 1024 * flash->total_size;
 	int i;

 	if (total_size > 512 * 1024) {
 		it8716f_over512k_spi_chip_write(flash, buf);
 	} else {
 		for (i = 0; i < total_size / 256; i++) {
 			it8716f_spi_page_program(i, buf,
 				(uint8_t *)flash->virtual_memory);
 		}
 	}

 	return 0;
 }
	/*
	* This file is part of the flashrom project.
	*
	* Copyright (C) 2007, 2008 Carl-Daniel Hailfinger
	* Copyright (C) 2008 Ronald Hoogenboom <ronald@zonnet.nl>
	* Copyright (C) 2008 coresystems GmbH
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; version 2 of the License.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	*/

	/*
	* Contains the ITE IT87* SPI specific routines
	*/

	#include <stdio.h>
	#include <pci/pci.h>
	#include <stdint.h>
	#include <string.h>
	#include "flash.h"
	#include "spi.h"

	#define ITE_SUPERIO_PORT1 0x2e
	#define ITE_SUPERIO_PORT2 0x4e

	uint16_t it8716f_flashport = 0;
	/* use fast 33MHz SPI (<>0) or slow 16MHz (0) */
	int fast_spi = 1;

	/* Generic Super I/O helper functions */
	uint8_t regval(uint16_t port, uint8_t reg)
	{
	OUTB(reg, port);
	return INB(port + 1);
	}

	void regwrite(uint16_t port, uint8_t reg, uint8_t val)
	{
	OUTB(reg, port);
	OUTB(val, port + 1);
	}

	/* Helper functions for most recent ITE IT87xx Super I/O chips */
	#define CHIP_ID_BYTE1_REG 0x20
	#define CHIP_ID_BYTE2_REG 0x21
	static void enter_conf_mode_ite(uint16_t port)
	{
	OUTB(0x87, port);
	OUTB(0x01, port);
	OUTB(0x55, port);
	if (port == ITE_SUPERIO_PORT1)
	OUTB(0x55, port);
	else
	OUTB(0xaa, port);
	}

	static void exit_conf_mode_ite(uint16_t port)
	{
	regwrite(port, 0x02, 0x02);
	}

	static uint16_t find_ite_spi_flash_port(uint16_t port)
	{
	uint8_t tmp = 0;
	uint16_t id, flashport = 0;

	enter_conf_mode_ite(port);

	id = regval(port, CHIP_ID_BYTE1_REG) << 8;
	id \|= regval(port, CHIP_ID_BYTE2_REG);

	/* TODO: Handle more IT87xx if they support flash translation */
	if (0x8716 == id \|\| 0x8718 == id) {
	/* NOLDN, reg 0x24, mask out lowest bit (suspend) */
	tmp = regval(port, 0x24) & 0xFE;
	printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
	0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
	printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
	0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
	printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
	0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
	printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
	0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
	printf("LPC write to serial flash %sabled\n",
	(tmp & 1 << 4) ? "en" : "dis");
	/* If any serial flash segment is enabled, enable writing. */
	if ((tmp & 0xe) && (!(tmp & 1 << 4))) {
	printf("Enabling LPC write to serial flash\n");
	tmp \|= 1 << 4;
	regwrite(port, 0x24, tmp);
	}
	printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
	/* LDN 0x7, reg 0x64/0x65 */
	regwrite(port, 0x07, 0x7);
	flashport = regval(port, 0x64) << 8;
	flashport \|= regval(port, 0x65);
	}
	exit_conf_mode_ite(port);
	return flashport;
	}

	int it87xx_probe_spi_flash(const char *name)
	{
	it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT1);

	if (!it8716f_flashport)
	it8716f_flashport = find_ite_spi_flash_port(ITE_SUPERIO_PORT2);

	if (it8716f_flashport)
	flashbus = BUS_TYPE_IT87XX_SPI;

	return (!it8716f_flashport);
	}

	/*
	* The IT8716F only supports commands with length 1,2,4,5 bytes including
	* command byte and can not read more than 3 bytes from the device.
	*
	* This function expects writearr[0] to be the first byte sent to the device,
	* whereas the IT8716F splits commands internally into address and non-address
	* commands with the address in inverse wire order. That's why the register
	* ordering in case 4 and 5 may seem strange.
	*/
	int it8716f_spi_command(unsigned int writecnt, unsigned int readcnt,
	const unsigned char writearr, unsigned char readarr)
	{
	uint8_t busy, writeenc;
	int i;

	do {
	busy = INB(it8716f_flashport) & 0x80;
	} while (busy);
	if (readcnt > 3) {
	printf("%s called with unsupported readcnt %i.\n",
	__FUNCTION__, readcnt);
	return 1;
	}
	switch (writecnt) {
	case 1:
	OUTB(writearr[0], it8716f_flashport + 1);
	writeenc = 0x0;
	break;
	case 2:
	OUTB(writearr[0], it8716f_flashport + 1);
	OUTB(writearr[1], it8716f_flashport + 7);
	writeenc = 0x1;
	break;
	case 4:
	OUTB(writearr[0], it8716f_flashport + 1);
	OUTB(writearr[1], it8716f_flashport + 4);
	OUTB(writearr[2], it8716f_flashport + 3);
	OUTB(writearr[3], it8716f_flashport + 2);
	writeenc = 0x2;
	break;
	case 5:
	OUTB(writearr[0], it8716f_flashport + 1);
	OUTB(writearr[1], it8716f_flashport + 4);
	OUTB(writearr[2], it8716f_flashport + 3);
	OUTB(writearr[3], it8716f_flashport + 2);
	OUTB(writearr[4], it8716f_flashport + 7);
	writeenc = 0x3;
	break;
	default:
	printf("%s called with unsupported writecnt %i.\n",
	__FUNCTION__, writecnt);
	return 1;
	}
	/*
	* Start IO, 33 or 16 MHz, readcnt input bytes, writecnt output bytes.
	* Note:
	* We can't use writecnt directly, but have to use a strange encoding.
	*/
	OUTB(((0x4 + (fast_spi ? 1 : 0)) << 4)
	\| ((readcnt & 0x3) << 2) \| (writeenc), it8716f_flashport);

	if (readcnt > 0) {
	do {
	busy = INB(it8716f_flashport) & 0x80;
	} while (busy);

	for (i = 0; i < readcnt; i++)
	readarr[i] = INB(it8716f_flashport + 5 + i);
	}

	return 0;
	}

	/* Page size is usually 256 bytes */
	static void it8716f_spi_page_program(int block, uint8_t buf, uint8_t bios)
	{
	int i;

	spi_write_enable();
	OUTB(0x06, it8716f_flashport + 1);
	OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport);
	for (i = 0; i < 256; i++) {
	bios[256 * block + i] = buf[256 * block + i];
	}
	OUTB(0, it8716f_flashport);
	/* Wait until the Write-In-Progress bit is cleared.
	* This usually takes 1-10 ms, so wait in 1 ms steps.
	*/
	while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
	usleep(1000);
	}

	/*
	* IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
	* Program chip using firmware cycle byte programming. (SLOW!)
	*/
	int it8716f_over512k_spi_chip_write(struct flashchip flash, uint8_t buf)
	{
	int total_size = 1024 * flash->total_size;
	int i;

	fast_spi = 0;

	spi_disable_blockprotect();
	for (i = 0; i < total_size; i++) {
	spi_write_enable();
	spi_byte_program(i, buf[i]);
	while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
	myusec_delay(10);
	}
	/* resume normal ops... */
	OUTB(0x20, it8716f_flashport);

	return 0;
	}

	/*
	* IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles
	* Need to read this big flash using firmware cycles 3 byte at a time.
	*/
	int it8716f_spi_chip_read(struct flashchip flash, uint8_t buf)
	{
	int total_size = 1024 * flash->total_size;
	int i;
	fast_spi = 0;

	if (total_size > 512 * 1024) {
	for (i = 0; i < total_size; i += 3) {
	int toread = 3;
	if (total_size - i < toread)
	toread = total_size - i;
	spi_nbyte_read(i, buf + i, toread);
	}
	} else {
	memcpy(buf, (const char *)flash->virtual_memory, total_size);
	}

	return 0;
	}

	int it8716f_spi_chip_write(struct flashchip flash, uint8_t buf)
	{
	int total_size = 1024 * flash->total_size;
	int i;

	if (total_size > 512 * 1024) {
	it8716f_over512k_spi_chip_write(flash, buf);
	} else {
	for (i = 0; i < total_size / 256; i++) {
	it8716f_spi_page_program(i, buf,
	(uint8_t *)flash->virtual_memory);
	}
	}

	return 0;
	}