| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2000 Silicon Integrated System Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /* |
| * Datasheet: |
| * - Name: Intel 82802AB/82802AC Firmware Hub (FWH) |
| * - URL: http://www.intel.com/design/chipsets/datashts/290658.htm |
| * - PDF: http://download.intel.com/design/chipsets/datashts/29065804.pdf |
| * - Order number: 290658-004 |
| */ |
| |
| #include "flash.h" |
| #include "chipdrivers.h" |
| |
| void print_status_82802ab(uint8_t status) |
| { |
| msg_cdbg("%s", status & 0x80 ? "Ready:" : "Busy:"); |
| msg_cdbg("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:"); |
| msg_cdbg("%s", status & 0x20 ? "BE ERROR:" : "BE OK:"); |
| msg_cdbg("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:"); |
| msg_cdbg("%s", status & 0x8 ? "VP ERR:" : "VPP OK:"); |
| msg_cdbg("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:"); |
| msg_cdbg("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:"); |
| } |
| |
| int probe_82802ab(struct flashchip *flash) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t id1, id2, flashcontent1, flashcontent2; |
| int shifted = (flash->feature_bits & FEATURE_ADDR_SHIFTED) != 0; |
| |
| /* Reset to get a clean state */ |
| chip_writeb(0xFF, bios); |
| programmer_delay(10); |
| |
| /* Enter ID mode */ |
| chip_writeb(0x90, bios); |
| programmer_delay(10); |
| |
| id1 = chip_readb(bios + (0x00 << shifted)); |
| id2 = chip_readb(bios + (0x01 << shifted)); |
| |
| /* Leave ID mode */ |
| chip_writeb(0xFF, bios); |
| |
| programmer_delay(10); |
| |
| msg_cdbg("%s: id1 0x%02x, id2 0x%02x", __func__, id1, id2); |
| |
| if (!oddparity(id1)) |
| msg_cdbg(", id1 parity violation"); |
| |
| /* |
| * Read the product ID location again. We should now see normal |
| * flash contents. |
| */ |
| flashcontent1 = chip_readb(bios + (0x00 << shifted)); |
| flashcontent2 = chip_readb(bios + (0x01 << shifted)); |
| |
| if (id1 == flashcontent1) |
| msg_cdbg(", id1 is normal flash content"); |
| if (id2 == flashcontent2) |
| msg_cdbg(", id2 is normal flash content"); |
| |
| msg_cdbg("\n"); |
| if (id1 != flash->manufacture_id || id2 != flash->model_id) |
| return 0; |
| |
| if (flash->feature_bits & FEATURE_REGISTERMAP) |
| map_flash_registers(flash); |
| |
| return 1; |
| } |
| |
| uint8_t wait_82802ab(struct flashchip *flash) |
| { |
| uint8_t status; |
| chipaddr bios = flash->virtual_memory; |
| |
| chip_writeb(0x70, bios); |
| if ((chip_readb(bios) & 0x80) == 0) { // it's busy |
| while ((chip_readb(bios) & 0x80) == 0) ; |
| } |
| |
| status = chip_readb(bios); |
| |
| /* Reset to get a clean state */ |
| chip_writeb(0xFF, bios); |
| |
| return status; |
| } |
| |
| int unlock_82802ab(struct flashchip *flash) |
| { |
| int i; |
| //chipaddr wrprotect = flash->virtual_registers + page + 2; |
| |
| for (i = 0; i < flash->total_size * 1024; i+= flash->page_size) |
| chip_writeb(0, flash->virtual_registers + i + 2); |
| |
| return 0; |
| } |
| |
| int erase_block_82802ab(struct flashchip *flash, unsigned int page, |
| unsigned int pagesize) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t status; |
| |
| // clear status register |
| chip_writeb(0x50, bios + page); |
| |
| // now start it |
| chip_writeb(0x20, bios + page); |
| chip_writeb(0xd0, bios + page); |
| programmer_delay(10); |
| |
| // now let's see what the register is |
| status = wait_82802ab(flash); |
| print_status_82802ab(status); |
| |
| /* FIXME: Check the status register for errors. */ |
| return 0; |
| } |
| |
| /* chunksize is 1 */ |
| int write_82802ab(struct flashchip *flash, uint8_t *src, unsigned int start, unsigned int len) |
| { |
| int i; |
| chipaddr dst = flash->virtual_memory + start; |
| |
| for (i = 0; i < len; i++) { |
| /* transfer data from source to destination */ |
| chip_writeb(0x40, dst); |
| chip_writeb(*src++, dst++); |
| wait_82802ab(flash); |
| } |
| |
| /* FIXME: Ignore errors for now. */ |
| return 0; |
| } |
| |
| int unlock_28f004s5(struct flashchip *flash) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t mcfg, bcfg, need_unlock = 0, can_unlock = 0; |
| int i; |
| |
| /* Clear status register */ |
| chip_writeb(0x50, bios); |
| |
| /* Read identifier codes */ |
| chip_writeb(0x90, bios); |
| |
| /* Read master lock-bit */ |
| mcfg = chip_readb(bios + 0x3); |
| msg_cdbg("master lock is "); |
| if (mcfg) { |
| msg_cdbg("locked!\n"); |
| } else { |
| msg_cdbg("unlocked!\n"); |
| can_unlock = 1; |
| } |
| |
| /* Read block lock-bits */ |
| for (i = 0; i < flash->total_size * 1024; i+= (64 * 1024)) { |
| bcfg = chip_readb(bios + i + 2); // read block lock config |
| msg_cdbg("block lock at %06x is %slocked!\n", i, bcfg ? "" : "un"); |
| if (bcfg) { |
| need_unlock = 1; |
| } |
| } |
| |
| /* Reset chip */ |
| chip_writeb(0xFF, bios); |
| |
| /* Unlock: clear block lock-bits, if needed */ |
| if (can_unlock && need_unlock) { |
| msg_cdbg("Unlock: "); |
| chip_writeb(0x60, bios); |
| chip_writeb(0xD0, bios); |
| chip_writeb(0xFF, bios); |
| msg_cdbg("Done!\n"); |
| } |
| |
| /* Error: master locked or a block is locked */ |
| if (!can_unlock && need_unlock) { |
| msg_cerr("At least one block is locked and lockdown is active!\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int unlock_lh28f008bjt(struct flashchip *flash) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t mcfg, bcfg; |
| uint8_t need_unlock = 0, can_unlock = 0; |
| int i; |
| |
| /* Wait if chip is busy */ |
| wait_82802ab(flash); |
| |
| /* Read identifier codes */ |
| chip_writeb(0x90, bios); |
| |
| /* Read master lock-bit */ |
| mcfg = chip_readb(bios + 0x3); |
| msg_cdbg("master lock is "); |
| if (mcfg) { |
| msg_cdbg("locked!\n"); |
| } else { |
| msg_cdbg("unlocked!\n"); |
| can_unlock = 1; |
| } |
| |
| /* Read block lock-bits, 8 * 8 KB + 15 * 64 KB */ |
| for (i = 0; i < flash->total_size * 1024; |
| i += (i >= (64 * 1024) ? 64 * 1024 : 8 * 1024)) { |
| bcfg = chip_readb(bios + i + 2); /* read block lock config */ |
| msg_cdbg("block lock at %06x is %slocked!\n", i, |
| bcfg ? "" : "un"); |
| if (bcfg) |
| need_unlock = 1; |
| } |
| |
| /* Reset chip */ |
| chip_writeb(0xFF, bios); |
| |
| /* Unlock: clear block lock-bits, if needed */ |
| if (can_unlock && need_unlock) { |
| msg_cdbg("Unlock: "); |
| chip_writeb(0x60, bios); |
| chip_writeb(0xD0, bios); |
| chip_writeb(0xFF, bios); |
| wait_82802ab(flash); |
| msg_cdbg("Done!\n"); |
| } |
| |
| /* Error: master locked or a block is locked */ |
| if (!can_unlock && need_unlock) { |
| msg_cerr("At least one block is locked and lockdown is active!\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |