Mark the Silicon Image PCI0680 Ultra ATA-133 controller as working
I tested identify, read, write, erase, verify successfully, HOWEVER,
this will only work (at least on my card) after de-soldering the
soldered-on PLCC32 one-time programmable (OTP) chip (Holtek HT27C010)
and soldering on a (re-)programmable flash ROM chip or a socket.
Example:
http://www.coreboot.org/File:Sii_controller1.jpg
http://www.coreboot.org/File:Sii_controller2.jpg
The OTP chip which came on my card does not react to the standard JEDEC
identify/read/write/erase commands anymore, so if all other such PCI0680
controllers which are around also have the same OTP chip (that's not
necessarily the case), they cannot be used as "external programmer" in
flashrom without the above mentioned modifications.
Corresponding to flashrom svn r536.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
1 file changed
