)]}'
{
  "commit": "cdde6da8e58bbc4087df71b8c8230e02c38c8b9c",
  "tree": "8e0bf8234f7f44d0ef18d5b76984d05674384e88",
  "parents": [
    "c7e8a0ce1e2c5c08a43060ead373aebe62e68afe"
  ],
  "author": {
    "name": "Uwe Hermann",
    "email": "uwe@hermann-uwe.de",
    "time": "Tue May 19 21:03:31 2009 +0000"
  },
  "committer": {
    "name": "Uwe Hermann",
    "email": "uwe@hermann-uwe.de",
    "time": "Tue May 19 21:03:31 2009 +0000"
  },
  "message": "Mark the Silicon Image PCI0680 Ultra ATA-133 controller as working\n\nI tested identify, read, write, erase, verify successfully, HOWEVER,\nthis will only work (at least on my card) after de-soldering the\nsoldered-on PLCC32 one-time programmable (OTP) chip (Holtek HT27C010)\nand soldering on a (re-)programmable flash ROM chip or a socket.\n\nExample:\n\nhttp://www.coreboot.org/File:Sii_controller1.jpg\nhttp://www.coreboot.org/File:Sii_controller2.jpg\n\nThe OTP chip which came on my card does not react to the standard JEDEC\nidentify/read/write/erase commands anymore, so if all other such PCI0680\ncontrollers which are around also have the same OTP chip (that\u0027s not\nnecessarily the case), they cannot be used as \"external programmer\" in\nflashrom without the above mentioned modifications.\n\nCorresponding to flashrom svn r536.\n\nSigned-off-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\nAcked-by: Uwe Hermann \u003cuwe@hermann-uwe.de\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "a137c7fca23737a2957eabe5a8057e1df56f887c",
      "old_mode": 33188,
      "old_path": "satasii.c",
      "new_id": "468d01be8af50376ec32cafe245a8bea8ddaca77",
      "new_mode": 33188,
      "new_path": "satasii.c"
    }
  ]
}