| ------------------------------------------------------------------------------- |
| flashrom README |
| ------------------------------------------------------------------------------- |
| |
| flashrom is a utility for detecting, reading, writing, verifying and erasing |
| flash chips. It is often used to flash BIOS/EFI/coreboot/firmware images |
| in-system using a supported mainboard, but it also supports flashing of network |
| cards (NICs), SATA controller cards, and other external devices which can |
| program flash chips. |
| |
| It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and TSOP40 |
| chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. |
| |
| Please see the flashrom(8) manpage. |
| |
| |
| Packaging |
| --------- |
| |
| To package flashrom and remove dependencies on subversion, either use |
| make export |
| or |
| make tarball |
| |
| make export will export all flashrom files from the subversion repository at |
| revision BASE into a directory named $EXPORTDIR/flashrom-$VERSION-r$SVNREVISION |
| and will additionally modify the Makefile in that directory to contain the svn |
| revision of the exported tree. |
| |
| make tarball will simply tar up the result of make export and gzip compress it. |
| |
| The snapshot tarballs are the result of make tarball and require no further |
| processing. |
| |
| |
| Build Instructions |
| ------------------ |
| |
| To build flashrom you need to install the following packages or ports: |
| |
| Linux et al: |
| |
| * pciutils / libpci |
| * pciutils-devel / pciutils-dev / libpci-dev |
| * zlib-devel / zlib1g-dev (only needed if libpci is static) |
| |
| On FreeBSD, you need the following ports: |
| |
| * devel/gmake |
| * devel/libpci |
| |
| To compile on Linux, use: |
| |
| make |
| |
| To compile on FreeBSD, use: |
| |
| gmake |
| |
| To compile on Nexenta, use: |
| |
| make |
| |
| To compile on Solaris, use: |
| |
| gmake LDFLAGS="-L$pathtolibpci" CC="gcc -I$pathtopciheaders" CFLAGS=-O2 |
| |
| To compile on DragonFly BSD, use: |
| |
| ln -s /usr/pkg/include/pciutils pci |
| gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib" |
| |
| To compile and run on Darwin/Mac OS X: |
| |
| Install DirectIO from coresystems GmbH. |
| DirectIO is available at http://www.coresystems.de/en/directio. |
| |
| |
| Installation |
| ------------ |
| |
| In order to install flashrom and the manpage into /usr/local, type: |
| |
| make install |
| |
| For installation in a different directory use DESTDIR, e.g. like this: |
| |
| make DESTDIR=/usr install |
| |
| If you have insufficient permissions for the destination directory, use sudo |
| by adding sudo in front of the commands above. |
| |
| |
| Contact |
| ------- |
| |
| The official flashrom website is: |
| |
| http://www.flashrom.org/ |
| |
| The IRC channel is |
| |
| #flashrom at irc.freenode.net |
| |
| The Mailing list addess is |
| |
| flashrom@flashrom.org |