Try to remove all read and write locks on CK804 (and MCP51)
We made a first step into this direction in r1405, but failed to
notice that there was already an extended patch by Jonathan which
was refined to become this one.
Allows the removal of board_shuttle_fn25 (which was also intended to be
used on the ASUS A8N-SLI Deluxe, but this was never tested).
Corresponding to flashrom svn r1593.
A previous iteration was tested on CK804 and
Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net>
which was then
Acked-by: Stefan Reinauer <stepan@coreboot.org>
Rebasing, refining and making errors non-fatal is
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
diff --git a/board_enable.c b/board_enable.c
index cee9ec5..e0075a0 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -993,26 +993,6 @@
/*
* Suited for:
- * - Shuttle FN25 (SN25P): AMD S939 + NVIDIA CK804 (nForce4)
- */
-static int board_shuttle_fn25(void)
-{
- struct pci_dev *dev;
-
- dev = pci_dev_find(0x10DE, 0x0050); /* NVIDIA CK804 ISA bridge. */
- if (!dev) {
- msg_perr("\nERROR: NVIDIA nForce4 ISA bridge not found.\n");
- return -1;
- }
-
- /* One of those bits seems to be connected to TBL#, but -ENOINFO. */
- pci_write_byte(dev, 0x92, 0);
-
- return 0;
-}
-
-/*
- * Suited for:
* - Elitegroup GeForce6100SM-M: NVIDIA MCP61 + ITE IT8726F
*/
static int board_ecs_geforce6100sm_m(void)
@@ -2339,7 +2319,6 @@
{0x8086, 0x27A0, 0x1043, 0x1287, 0x8086, 0x27DF, 0x1043, 0x1287, "^A8J", NULL, NULL, P3, "ASUS", "A8Jm", 0, NT, intel_ich_gpio34_raise},
{0x10DE, 0x0260, 0x103C, 0x2A34, 0x10DE, 0x0264, 0x103C, 0x2A34, "NODUSM3", NULL, NULL, P3, "ASUS", "A8M2N-LA (NodusM3-GL8E)", 0, OK, nvidia_mcp_gpio0_raise},
{0x10DE, 0x0260, 0x103c, 0x2a3e, 0x10DE, 0x0264, 0x103c, 0x2a3e, "NAGAMI2L", NULL, NULL, P3, "ASUS", "A8N-LA (Nagami-GL8E)", 0, OK, nvidia_mcp_gpio0_raise},
- {0x10DE, 0x005E, 0x1043, 0x815A, 0x10DE, 0x0054, 0x1043, 0x815A, "^A8N-SLI DELUXE", NULL, NULL, P3, "ASUS", "A8N-SLI Deluxe", 0, NT, board_shuttle_fn25},
{0x10de, 0x0264, 0x1043, 0x81bc, 0x10de, 0x02f0, 0x1043, 0x81cd, NULL, NULL, NULL, P3, "ASUS", "A8N-VM CSM", 0, OK, w83627ehf_gpio22_raise_2e},
{0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, P3, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise},
{0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, P3, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise},
@@ -2433,7 +2412,6 @@
{0x8086, 0x24d3, 0x144d, 0xb025, 0x8086, 0x1050, 0x144d, 0xb025, NULL, NULL, NULL, P3, "Samsung", "Polaris 32", 0, OK, intel_ich_gpio21_raise},
{0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, NULL, "shuttle", "ak31", P3, "Shuttle", "AK31", 0, OK, w836xx_memw_enable_2e},
{0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, NULL, P3, "Shuttle", "AK38N", 256, OK, NULL},
- {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, NULL, NULL, P3, "Shuttle", "FN25", 0, OK, board_shuttle_fn25},
{0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x3058, 0x15DD, 0x7609, NULL, NULL, NULL, P3, "Soyo", "SY-7VCA", 0, OK, via_apollo_gpo0_lower},
{0x10de, 0x0364, 0x108e, 0x6676, 0x10de, 0x0369, 0x108e, 0x6676, "^Sun Ultra 40 M2", NULL, NULL, P3, "Sun", "Ultra 40 M2", 0, OK, board_sun_ultra_40_m2},
{0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x0596, 0x1106, 0, NULL, NULL, NULL, P3, "Tekram", "P6Pro-A5", 256, OK, NULL},
diff --git a/chipset_enable.c b/chipset_enable.c
index 2e4a5fc..e1684f9 100644
--- a/chipset_enable.c
+++ b/chipset_enable.c
@@ -997,25 +997,74 @@
static int enable_flash_ck804(struct pci_dev *dev, const char *name)
{
- uint8_t old, new;
+ uint32_t segctrl;
+ uint8_t reg, old, new;
+ unsigned int err = 0;
- pci_write_byte(dev, 0x92, 0x00);
- if (pci_read_byte(dev, 0x92) != 0x00) {
- msg_pinfo("Setting register 0x%x to 0x%x on %s failed "
- "(WARNING ONLY).\n", 0x92, 0x00, name);
+ /* 0x8A is special: it is a single byte and only one nibble is touched. */
+ reg = 0x8A;
+ segctrl = pci_read_byte(dev, reg);
+ if ((segctrl & 0x3) != 0x0) {
+ if ((segctrl & 0xC) != 0x0) {
+ msg_pinfo("Can not unlock existing protection in register 0x%02x.\n", reg);
+ err++;
+ } else {
+ msg_pdbg("Unlocking protection in register 0x%02x... ", reg);
+ rpci_write_byte(dev, reg, segctrl & 0xF0);
+
+ segctrl = pci_read_byte(dev, reg);
+ if ((segctrl & 0x3) != 0x0) {
+ msg_pinfo("Could not unlock protection in register 0x%02x (new value: 0x%x).\n",
+ reg, segctrl);
+ err++;
+ } else
+ msg_pdbg("OK\n");
+ }
}
- old = pci_read_byte(dev, 0x88);
- new = old | 0xc0;
+ for (reg = 0x8C; reg <= 0x94; reg += 4) {
+ segctrl = pci_read_long(dev, reg);
+ if ((segctrl & 0x33333333) == 0x00000000) {
+ /* reads and writes are unlocked */
+ continue;
+ }
+ if ((segctrl & 0xCCCCCCCC) != 0x00000000) {
+ msg_pinfo("Can not unlock existing protection in register 0x%02x.\n", reg);
+ err++;
+ continue;
+ }
+ msg_pdbg("Unlocking protection in register 0x%02x... ", reg);
+ rpci_write_long(dev, reg, 0x00000000);
+
+ segctrl = pci_read_long(dev, reg);
+ if ((segctrl & 0x33333333) != 0x00000000) {
+ msg_pinfo("Could not unlock protection in register 0x%02x (new value: 0x%08x).\n",
+ reg, segctrl);
+ err++;
+ } else
+ msg_pdbg("OK\n");
+ }
+
+ if (err > 0) {
+ msg_pinfo("%d locks could not be disabled, disabling writes (reads may also fail).\n", err);
+ programmer_may_write = 0;
+ }
+
+ reg = 0x88;
+ old = pci_read_byte(dev, reg);
+ new = old | 0xC0;
if (new != old) {
- rpci_write_byte(dev, 0x88, new);
- if (pci_read_byte(dev, 0x88) != new) {
- msg_pinfo("Setting register 0x%x to 0x%x on %s failed "
- "(WARNING ONLY).\n", 0x88, new, name);
+ rpci_write_byte(dev, reg, new);
+ if (pci_read_byte(dev, reg) != new) {
+ msg_pinfo("Setting register 0x%02x to 0x%x on %s failed.\n", reg, new, name);
+ err++;
}
}
if (enable_flash_nvidia_common(dev, name))
+ err++;
+
+ if (err > 0)
return ERROR_NONFATAL;
else
return 0;
diff --git a/print.c b/print.c
index ae067a6..582a49e 100644
--- a/print.c
+++ b/print.c
@@ -620,7 +620,7 @@
B("ASUS", "A8N-E", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/", NULL),
B("ASUS", "A8N-LA (Nagami-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00647121&dlc=en", "This is an OEM board from HP, the HP name is Nagami-GL8E."),
B("ASUS", "A8N-SLI", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI/", NULL),
- B("ASUS", "A8N-SLI Deluxe", NT, NULL, "Untested board enable."),
+ B("ASUS", "A8N-SLI Deluxe", NT, NULL, "Should work out of the box since r1593."),
B("ASUS", "A8N-SLI Premium", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NSLI_Premium/", NULL),
B("ASUS", "A8N-VM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM/", NULL),
B("ASUS", "A8N-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_Socket_939/A8NVM_CSM/", NULL),