| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2000 Silicon Integrated System Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* |
| * Datasheet: |
| * - Name: Intel 82802AB/82802AC Firmware Hub (FWH) |
| * - URL: http://www.intel.com/design/chipsets/datashts/290658.htm |
| * - PDF: http://download.intel.com/design/chipsets/datashts/29065804.pdf |
| * - Order number: 290658-004 |
| */ |
| |
| #include <stdbool.h> |
| #include <stdlib.h> |
| |
| #include "flash.h" |
| #include "programmer.h" |
| #include "chipdrivers/memory_bus.h" |
| |
| void print_status_82802ab(uint8_t status) |
| { |
| msg_cdbg("%s", status & 0x80 ? "Ready:" : "Busy:"); |
| msg_cdbg("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:"); |
| msg_cdbg("%s", status & 0x20 ? "BE ERROR:" : "BE OK:"); |
| msg_cdbg("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:"); |
| msg_cdbg("%s", status & 0x8 ? "VP ERR:" : "VPP OK:"); |
| msg_cdbg("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:"); |
| msg_cdbg("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:"); |
| } |
| |
| static struct found_id *probe_82802ab_generic( |
| const struct par_master *par, |
| chipsize_t chip_size, feature_bits_t chip_features) |
| { |
| const unsigned int addr_shift = chip_features & FEATURE_ADDR_SHIFTED ? 1 : 0; |
| uint8_t raw[2], flashcontent1, flashcontent2; |
| |
| const chipaddr bios = (chipaddr)programmer_map_flash_data(par, chip_size, ""); |
| if (bios == (chipaddr)ERROR_PTR) |
| return NULL; |
| |
| /* Reset to get a clean state */ |
| par->chip_writeb(par, 0xFF, bios); |
| programmer_delay(10); |
| |
| /* Enter ID mode */ |
| par->chip_writeb(par, 0x90, bios); |
| programmer_delay(10); |
| |
| raw[0] = par->chip_readb(par, bios + (0x00 << addr_shift)); |
| raw[1] = par->chip_readb(par, bios + (0x01 << addr_shift)); |
| |
| /* Leave ID mode */ |
| par->chip_writeb(par, 0xFF, bios); |
| |
| programmer_delay(10); |
| |
| /* |
| * Read the product ID location again. We should now see normal |
| * flash contents. |
| */ |
| flashcontent1 = par->chip_readb(par, bios + (0x00 << addr_shift)); |
| flashcontent2 = par->chip_readb(par, bios + (0x01 << addr_shift)); |
| |
| programmer_unmap_flash_region(par, (void *)bios, chip_size); |
| |
| if (flashprog_no_data(raw, sizeof(raw))) |
| return NULL; |
| |
| msg_cdbg("%s (%uKiB, features: 0x%02x): id1 0x%02x, id2 0x%02x", |
| __func__, chip_size / KiB, chip_features, raw[0], raw[1]); |
| |
| if (!oddparity(raw[0])) |
| msg_cdbg(", id1 parity violation"); |
| |
| if (raw[0] == flashcontent1) |
| msg_cdbg(", id1 is normal flash content"); |
| if (raw[1] == flashcontent2) |
| msg_cdbg(", id2 is normal flash content"); |
| msg_cdbg("\n"); |
| |
| struct memory_found_id *const found = alloc_memory_found_id(); |
| if (!found) { |
| msg_cerr("Out of memory!\n"); |
| return NULL; |
| } |
| |
| found->generic.info.id.manufacture = raw[0]; |
| found->generic.info.id.model = raw[1]; |
| found->generic.info.id.type = ID_82802AB; |
| found->memory_info.chip_size = chip_size; |
| found->memory_info.chip_features = chip_features; |
| |
| return &found->generic; |
| } |
| |
| struct found_id *probe_82802ab(const struct bus_probe *probe, |
| const struct master_common *mst, |
| const struct flashchip *chip) |
| { |
| const struct par_master *const par = (const struct par_master *)mst; |
| struct found_id *ids = NULL, **next_ptr = &ids; |
| chipsize_t chip_size; |
| |
| if (chip) |
| return probe_82802ab_generic(par, chip->total_size * KiB, chip->feature_bits); |
| |
| for (chip_size = 256*KiB; chip_size <= 2*MiB; chip_size *= 2) { |
| *next_ptr = probe_82802ab_generic(par, chip_size, 0); |
| if (*next_ptr) |
| next_ptr = &(*next_ptr)->next; |
| |
| *next_ptr = probe_82802ab_generic(par, chip_size, FEATURE_ADDR_SHIFTED); |
| if (*next_ptr) |
| next_ptr = &(*next_ptr)->next; |
| } |
| |
| return ids; |
| } |
| |
| /* FIXME: needs timeout */ |
| uint8_t wait_82802ab(struct flashctx *flash) |
| { |
| uint8_t status; |
| chipaddr bios = flash->virtual_memory; |
| |
| chip_writeb(flash, 0x70, bios); |
| |
| while ((chip_readb(flash, bios) & 0x80) == 0) // it's busy |
| ; |
| |
| status = chip_readb(flash, bios); |
| |
| /* Reset to get a clean state */ |
| chip_writeb(flash, 0xFF, bios); |
| |
| return status; |
| } |
| |
| int erase_block_82802ab(struct flashctx *flash, unsigned int page, |
| unsigned int pagesize) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t status; |
| |
| // clear status register |
| chip_writeb(flash, 0x50, bios + page); |
| |
| // now start it |
| chip_writeb(flash, 0x20, bios + page); |
| chip_writeb(flash, 0xd0, bios + page); |
| programmer_delay(10); |
| |
| // now let's see what the register is |
| status = wait_82802ab(flash); |
| print_status_82802ab(status); |
| |
| /* FIXME: Check the status register for errors. */ |
| return 0; |
| } |
| |
| /* chunksize is 1 */ |
| int write_82802ab(struct flashctx *flash, const uint8_t *src, unsigned int start, unsigned int len) |
| { |
| unsigned int i; |
| chipaddr dst = flash->virtual_memory + start; |
| |
| for (i = 0; i < len; i++) { |
| /* transfer data from source to destination */ |
| chip_writeb(flash, 0x40, dst); |
| chip_writeb(flash, *src++, dst++); |
| wait_82802ab(flash); |
| flashprog_progress_add(flash, 1); |
| } |
| |
| /* FIXME: Ignore errors for now. */ |
| return 0; |
| } |
| |
| int unlock_28f004s5(struct flashctx *flash) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t mcfg, bcfg; |
| bool need_unlock = false, can_unlock = false; |
| unsigned int i; |
| |
| /* Clear status register */ |
| chip_writeb(flash, 0x50, bios); |
| |
| /* Read identifier codes */ |
| chip_writeb(flash, 0x90, bios); |
| |
| /* Read master lock-bit */ |
| mcfg = chip_readb(flash, bios + 0x3); |
| msg_cdbg("master lock is "); |
| if (mcfg) { |
| msg_cdbg("locked!\n"); |
| } else { |
| msg_cdbg("unlocked!\n"); |
| can_unlock = true; |
| } |
| |
| /* Read block lock-bits */ |
| for (i = 0; i < flash->chip->total_size * 1024; i+= (64 * 1024)) { |
| bcfg = chip_readb(flash, bios + i + 2); // read block lock config |
| msg_cdbg("block lock at %06x is %slocked!\n", i, bcfg ? "" : "un"); |
| if (bcfg) { |
| need_unlock = true; |
| } |
| } |
| |
| /* Reset chip */ |
| chip_writeb(flash, 0xFF, bios); |
| |
| /* Unlock: clear block lock-bits, if needed */ |
| if (can_unlock && need_unlock) { |
| msg_cdbg("Unlock: "); |
| chip_writeb(flash, 0x60, bios); |
| chip_writeb(flash, 0xD0, bios); |
| chip_writeb(flash, 0xFF, bios); |
| msg_cdbg("Done!\n"); |
| } |
| |
| /* Error: master locked or a block is locked */ |
| if (!can_unlock && need_unlock) { |
| msg_cerr("At least one block is locked and lockdown is active!\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| int unlock_lh28f008bjt(struct flashctx *flash) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t mcfg, bcfg; |
| bool need_unlock = false, can_unlock = false; |
| unsigned int i; |
| |
| /* Wait if chip is busy */ |
| wait_82802ab(flash); |
| |
| /* Read identifier codes */ |
| chip_writeb(flash, 0x90, bios); |
| |
| /* Read master lock-bit */ |
| mcfg = chip_readb(flash, bios + 0x3); |
| msg_cdbg("master lock is "); |
| if (mcfg) { |
| msg_cdbg("locked!\n"); |
| } else { |
| msg_cdbg("unlocked!\n"); |
| can_unlock = true; |
| } |
| |
| /* Read block lock-bits, 8 * 8 KB + 15 * 64 KB */ |
| for (i = 0; i < flash->chip->total_size * 1024; |
| i += (i >= (64 * 1024) ? 64 * 1024 : 8 * 1024)) { |
| bcfg = chip_readb(flash, bios + i + 2); /* read block lock config */ |
| msg_cdbg("block lock at %06x is %slocked!\n", i, |
| bcfg ? "" : "un"); |
| if (bcfg) |
| need_unlock = true; |
| } |
| |
| /* Reset chip */ |
| chip_writeb(flash, 0xFF, bios); |
| |
| /* Unlock: clear block lock-bits, if needed */ |
| if (can_unlock && need_unlock) { |
| msg_cdbg("Unlock: "); |
| chip_writeb(flash, 0x60, bios); |
| chip_writeb(flash, 0xD0, bios); |
| chip_writeb(flash, 0xFF, bios); |
| wait_82802ab(flash); |
| msg_cdbg("Done!\n"); |
| } |
| |
| /* Error: master locked or a block is locked */ |
| if (!can_unlock && need_unlock) { |
| msg_cerr("At least one block is locked and lockdown is active!\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |