| project('flashromutils', 'c', |
| version : run_command('util/getversion.sh', '--version', check : true).stdout().strip(), |
| license : 'GPL-2.0', |
| meson_version : '>=0.50.0', |
| default_options : [ |
| 'warning_level=2', |
| 'c_std=c99', |
| 'werror=true', |
| 'optimization=s', |
| 'debug=false', |
| ], |
| ) |
| |
| # libtool versioning |
| lt_current = '1' |
| lt_revision = '0' |
| lt_age = '0' |
| lt_version = '@0@.@1@.@2@'.format(lt_current, lt_age, lt_revision) |
| |
| # hide/enable some warnings |
| warning_flags = [ |
| '-Wshadow', |
| '-Wmissing-prototypes', |
| '-Wwrite-strings', |
| '-Wno-unused-parameter', |
| '-Wno-address-of-packed-member', |
| '-Wno-enum-conversion', |
| '-Wno-missing-braces', |
| ] |
| |
| conf = configuration_data() |
| |
| cc = meson.get_compiler('c') |
| add_project_arguments(cc.get_supported_arguments(warning_flags), language : 'c') |
| add_project_arguments('-D_DEFAULT_SOURCE', language : 'c') |
| add_project_arguments('-D_POSIX_C_SOURCE=200809L', language : 'c') # required for fileno, nanosleep, and strndup |
| add_project_arguments('-D_BSD_SOURCE', language : 'c') # required for glibc < v2.19 |
| add_project_arguments('-DFLASHROM_VERSION="' + meson.project_version() + '"', language : 'c') |
| |
| # get defaults from configure |
| config_atahpt = get_option('config_atahpt') |
| config_atapromise = get_option('config_atapromise') |
| config_atavia = get_option('config_atavia') |
| config_buspirate_spi = get_option('config_buspirate_spi') |
| config_ch341a_spi = get_option('config_ch341a_spi') |
| config_dediprog = get_option('config_dediprog') |
| config_developerbox_spi = get_option('config_developerbox_spi') |
| config_digilent_spi = get_option('config_digilent_spi') |
| config_dirtyjtag_spi = get_option('config_dirtyjtag_spi') |
| config_drkaiser = get_option('config_drkaiser') |
| config_dummy = get_option('config_dummy') |
| config_ft2232_spi = get_option('config_ft2232_spi') |
| config_gfxnvidia = get_option('config_gfxnvidia') |
| config_internal = get_option('config_internal') |
| config_it8212 = get_option('config_it8212') |
| config_jlink_spi = get_option('config_jlink_spi') |
| config_linux_mtd = get_option('config_linux_mtd') |
| config_linux_spi = get_option('config_linux_spi') |
| config_mstarddc_spi = get_option('config_mstarddc_spi') |
| config_nic3com = get_option('config_nic3com') |
| config_nicintel_eeprom = get_option('config_nicintel_eeprom') |
| config_nicintel = get_option('config_nicintel') |
| config_nicintel_spi = get_option('config_nicintel_spi') |
| config_nicnatsemi = get_option('config_nicnatsemi') |
| config_nicrealtek = get_option('config_nicrealtek') |
| config_ogp_spi = get_option('config_ogp_spi') |
| config_pickit2_spi = get_option('config_pickit2_spi') |
| config_pony_spi = get_option('config_pony_spi') |
| config_rayer_spi = get_option('config_rayer_spi') |
| config_satamv = get_option('config_satamv') |
| config_satasii = get_option('config_satasii') |
| config_serprog = get_option('config_serprog') |
| config_usbblaster_spi = get_option('config_usbblaster_spi') |
| config_stlinkv3_spi = get_option('config_stlinkv3_spi') |
| config_default_programmer_name = get_option('default_programmer_name') |
| config_default_programmer_args = get_option('default_programmer_args') |
| config_print_wiki= get_option('print_wiki') |
| |
| cargs = [] |
| deps = [] |
| srcs = files( |
| '82802ab.c', |
| 'at45db.c', |
| 'bitbang_spi.c', |
| 'edi.c', |
| 'en29lv640b.c', |
| 'flashchips.c', |
| 'flashrom.c', |
| 'fmap.c', |
| 'helpers.c', |
| 'helpers_fileio.c', |
| 'ich_descriptors.c', |
| 'jedec.c', |
| 'layout.c', |
| 'libflashrom.c', |
| 'opaque.c', |
| 'parallel.c', |
| 'print.c', |
| 'programmer.c', |
| 'programmer_table.c', |
| 'sfdp.c', |
| 'spi25.c', |
| 'spi25_statusreg.c', |
| 'spi95.c', |
| 'spi.c', |
| 'sst28sf040.c', |
| 'sst49lfxxxc.c', |
| 'sst_fwhub.c', |
| 'stm50.c', |
| 'udelay.c', |
| 'w29ee011.c', |
| 'w39.c', |
| 'writeprotect.c', |
| 'writeprotect_ranges.c', |
| ) |
| |
| subdir('platform') |
| |
| host_is_x86 = ['x86', 'x86_64'].contains(host_machine.cpu_family()) |
| |
| need_serial = [ |
| config_buspirate_spi, config_pony_spi, config_serprog, |
| ].contains(true) |
| need_bitbang_spi = [ |
| config_internal, config_nicintel_spi, config_ogp_spi, |
| config_pony_spi, config_rayer_spi, |
| ].contains(true) |
| need_raw_mem_access = [ |
| config_atapromise, config_drkaiser, config_gfxnvidia, config_internal, |
| config_it8212, config_nicintel, config_nicintel_eeprom, config_nicintel_spi, |
| config_ogp_spi, config_satamv, config_satasii, |
| ].contains(true) |
| # Internal programmer uses x86 features if the system is x86 |
| need_x86_msr = config_internal and host_is_x86 |
| need_x86_port_io = [ |
| config_atahpt, config_atapromise, config_internal and host_is_x86, |
| config_nic3com, config_nicnatsemi, config_nicrealtek, config_rayer_spi, |
| config_satamv, |
| ].contains(true) |
| need_libpci = [ |
| config_atahpt, config_atapromise, config_atavia, |
| config_drkaiser, config_gfxnvidia, config_internal, config_it8212, |
| config_nic3com, config_nicintel, config_nicintel_eeprom, config_nicintel_spi, |
| config_nicnatsemi, config_nicrealtek, config_ogp_spi, config_satamv, |
| config_satasii, |
| ].contains(true) |
| need_libusb1 = [ |
| config_ch341a_spi, config_dediprog, config_developerbox_spi, |
| config_digilent_spi, config_dirtyjtag_spi, config_pickit2_spi, |
| config_stlinkv3_spi, |
| ].contains(true) |
| need_libftdi1 = [ |
| config_ft2232_spi, config_usbblaster_spi, |
| ].contains(true) |
| need_libjaylink = config_jlink_spi |
| |
| if (need_x86_port_io or need_x86_msr) and not host_is_x86 |
| error('one or more enabled programmer only supports x86 and target is not') |
| endif |
| |
| |
| # check for required symbols |
| if cc.has_function('clock_gettime') |
| add_project_arguments('-DHAVE_CLOCK_GETTIME=1', language : 'c') |
| endif |
| if cc.has_function('strnlen') |
| add_project_arguments('-DHAVE_STRNLEN=1', language : 'c') |
| endif |
| if cc.check_header('sys/utsname.h') |
| add_project_arguments('-DHAVE_UTSNAME=1', language : 'c') |
| endif |
| if host_machine.system() in ['cygwin', 'windows'] |
| add_project_arguments('-DIS_WINDOWS=1', language : 'c') |
| else |
| add_project_arguments('-DIS_WINDOWS=0', language : 'c') |
| endif |
| |
| # some programmers require libusb |
| if get_option('usb') |
| srcs += files('usbdev.c') |
| deps += dependency('libusb-1.0') |
| elif need_libusb1 |
| error('usb is disabled but one or more enabled programmer requires USB access') |
| endif |
| |
| # some programmers require libpci |
| if get_option('pciutils') |
| srcs += files('pcidev.c') |
| deps += dependency('libpci') |
| elif need_libpci |
| error('pciutils is disabled but one or more enabled programmer requires PCI access') |
| endif |
| |
| if need_libftdi1 |
| deps += dependency('libftdi1') |
| endif |
| |
| if need_libjaylink |
| deps += dependency('libjaylink') |
| endif |
| |
| # set defines for configured programmers |
| if config_atahpt |
| srcs += files('atahpt.c') |
| cargs += '-DCONFIG_ATAHPT=1' |
| endif |
| if config_atapromise |
| srcs += files('atapromise.c') |
| cargs += '-DCONFIG_ATAPROMISE=1' |
| endif |
| if config_atavia |
| srcs += files('atavia.c') |
| cargs += '-DCONFIG_ATAVIA=1' |
| endif |
| if config_buspirate_spi |
| srcs += files('buspirate_spi.c') |
| cargs += '-DCONFIG_BUSPIRATE_SPI=1' |
| endif |
| if config_ch341a_spi |
| srcs += files('ch341a_spi.c') |
| cargs += '-DCONFIG_CH341A_SPI=1' |
| endif |
| if config_dediprog |
| srcs += files('dediprog.c') |
| cargs += '-DCONFIG_DEDIPROG=1' |
| endif |
| if config_developerbox_spi |
| srcs += files('developerbox_spi.c') |
| cargs += '-DCONFIG_DEVELOPERBOX_SPI=1' |
| endif |
| if config_digilent_spi |
| srcs += files('digilent_spi.c') |
| cargs += '-DCONFIG_DIGILENT_SPI=1' |
| endif |
| if config_dirtyjtag_spi |
| srcs += files('dirtyjtag_spi.c') |
| cargs += '-DCONFIG_DIRTYJTAG_SPI=1' |
| endif |
| if config_drkaiser |
| srcs += files('drkaiser.c') |
| cargs += '-DCONFIG_DRKAISER=1' |
| endif |
| if config_dummy |
| srcs += files('dummyflasher.c') |
| cargs += '-DCONFIG_DUMMY=1' |
| endif |
| if config_ft2232_spi |
| srcs += files('ft2232_spi.c') |
| cargs += '-DCONFIG_FT2232_SPI=1' |
| cargs += '-DHAVE_FT232H=1' |
| endif |
| if config_gfxnvidia |
| srcs += files('gfxnvidia.c') |
| cargs += '-DCONFIG_GFXNVIDIA=1' |
| endif |
| if config_internal |
| srcs += files( |
| 'board_enable.c', |
| 'cbtable.c', |
| 'chipset_enable.c', |
| 'internal.c', |
| 'processor_enable.c', |
| 'known_boards.c', |
| ) |
| if host_is_x86 |
| srcs += files( |
| 'amd_imc.c', |
| 'dmi.c', |
| 'ichspi.c', |
| 'it87spi.c', |
| 'mcp6x_spi.c', |
| 'sb600spi.c', |
| 'wbsio_spi.c', |
| ) |
| endif |
| cargs += '-DCONFIG_INTERNAL=1' |
| if get_option('config_internal_dmi') |
| # Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode. |
| cargs += '-DCONFIG_INTERNAL_DMI=1' |
| endif |
| endif |
| if config_it8212 |
| srcs += files('it8212.c') |
| cargs += '-DCONFIG_IT8212=1' |
| endif |
| if config_jlink_spi |
| srcs += files('jlink_spi.c') |
| cargs += '-DCONFIG_JLINK_SPI=1' |
| endif |
| if config_linux_mtd |
| srcs += files('linux_mtd.c') |
| cargs += '-DCONFIG_LINUX_MTD=1' |
| endif |
| if config_linux_spi |
| srcs += files('linux_spi.c') |
| cargs += '-DCONFIG_LINUX_SPI=1' |
| endif |
| if config_mstarddc_spi |
| srcs += files('mstarddc_spi.c') |
| cargs += '-DCONFIG_MSTARDDC_SPI=1' |
| endif |
| if config_nic3com |
| srcs += files('nic3com.c') |
| cargs += '-DCONFIG_NIC3COM=1' |
| endif |
| if config_nicintel |
| srcs += files('nicintel.c') |
| cargs += '-DCONFIG_NICINTEL=1' |
| endif |
| if config_nicintel_eeprom |
| srcs += files('nicintel_eeprom.c') |
| cargs += '-DCONFIG_NICINTEL_EEPROM=1' |
| endif |
| if config_nicintel_spi |
| srcs += files('nicintel_spi.c') |
| cargs += '-DCONFIG_NICINTEL_SPI=1' |
| endif |
| if config_nicnatsemi |
| srcs += files('nicnatsemi.c') |
| cargs += '-DCONFIG_NICNATSEMI=1' |
| endif |
| if config_nicrealtek |
| srcs += files('nicrealtek.c') |
| cargs += '-DCONFIG_NICREALTEK=1' |
| endif |
| if config_ogp_spi |
| srcs += files('ogp_spi.c') |
| cargs += '-DCONFIG_OGP_SPI=1' |
| endif |
| if config_pickit2_spi |
| srcs += files('pickit2_spi.c') |
| cargs += '-DCONFIG_PICKIT2_SPI=1' |
| endif |
| if config_pony_spi |
| srcs += files('pony_spi.c') |
| cargs += '-DCONFIG_PONY_SPI=1' |
| endif |
| if config_rayer_spi |
| srcs += files('rayer_spi.c') |
| cargs += '-DCONFIG_RAYER_SPI=1' |
| endif |
| if config_satamv |
| srcs += files('satamv.c') |
| cargs += '-DCONFIG_SATAMV=1' |
| endif |
| if config_satasii |
| srcs += files('satasii.c') |
| cargs += '-DCONFIG_SATASII=1' |
| endif |
| if config_serprog |
| srcs += files('serprog.c') |
| cargs += '-DCONFIG_SERPROG=1' |
| endif |
| if config_usbblaster_spi |
| srcs += files('usbblaster_spi.c') |
| cargs += '-DCONFIG_USBBLASTER_SPI=1' |
| endif |
| if config_stlinkv3_spi |
| srcs += files('stlinkv3_spi.c') |
| cargs += '-DCONFIG_STLINKV3_SPI=1' |
| endif |
| |
| # bitbanging SPI infrastructure |
| if need_bitbang_spi |
| srcs += files('bitbang_spi.c') |
| cargs += '-DCONFIG_BITBANG_SPI=1' |
| endif |
| |
| if need_raw_mem_access |
| srcs += files('hwaccess_physmap.c') |
| endif |
| |
| if need_x86_port_io |
| srcs += files('hwaccess_x86_io.c') |
| cargs += '-D__FLASHROM_HAVE_OUTB__=1' |
| endif |
| |
| if need_x86_msr |
| srcs += files('hwaccess_x86_msr.c') |
| endif |
| |
| # raw serial IO |
| if need_serial |
| srcs += files('serial.c') |
| if host_machine.system() == 'linux' |
| srcs += files('custom_baud_linux.c') |
| else |
| srcs += files('custom_baud.c') |
| endif |
| endif |
| |
| if config_print_wiki |
| srcs += files('print_wiki.c') |
| cargs += '-DCONFIG_PRINT_WIKI=1' |
| endif |
| |
| if config_default_programmer_name != '' |
| cargs += '-DCONFIG_DEFAULT_PROGRAMMER_NAME=&programmer_' + config_default_programmer_name |
| else |
| cargs += '-DCONFIG_DEFAULT_PROGRAMMER_NAME=NULL' |
| endif |
| |
| cargs += '-DCONFIG_DEFAULT_PROGRAMMER_ARGS="' + config_default_programmer_args + '"' |
| |
| install_headers([ |
| 'include/libflashrom.h', |
| ], |
| ) |
| |
| include_dir = include_directories('include') |
| |
| mapfile = 'libflashrom.map' |
| vflag = '-Wl,--version-script,@0@/@1@'.format(meson.current_source_dir(), mapfile) |
| libflashrom = both_libraries( |
| 'flashrom', |
| sources : [ |
| srcs, |
| ], |
| include_directories : include_dir, |
| soversion : lt_current, |
| version : lt_version, |
| dependencies : [ |
| deps, |
| ], |
| c_args : [ |
| cargs, |
| ], |
| install : true, |
| link_args : vflag, |
| link_depends : mapfile, |
| ) |
| |
| version = meson.project_version() |
| #strip leading characters |
| if version.startswith('v') |
| version = version.split('v')[1] |
| endif |
| if version.startswith('p') |
| version = version.split('p')[1] |
| endif |
| |
| pkgg = import('pkgconfig') |
| pkgg.generate( |
| libraries : libflashrom, |
| version : version, |
| name : 'flashrom', |
| filebase : 'flashrom', |
| description : 'library to interact with flashrom', |
| ) |
| |
| conf.set('VERSION', version) |
| conf.set('MAN_DATE', run_command('util/getversion.sh', '--man-date', check : true).stdout().strip()) |
| configure_file( |
| input : 'flashrom.8.tmpl', |
| output : 'flashrom.8', |
| configuration : conf, |
| install: true, |
| install_dir: join_paths(get_option('mandir'), 'man8'), |
| ) |
| |
| executable( |
| 'flashrom', |
| files( |
| 'cli_classic.c', |
| 'cli_common.c', |
| 'cli_output.c', |
| ), |
| c_args : cargs, |
| include_directories : include_dir, |
| install : true, |
| install_dir : get_option('sbindir'), |
| link_with : libflashrom.get_static_lib(), # flashrom needs internal symbols of libflashrom |
| ) |
| |
| if get_option('ich_descriptors_tool').auto() or get_option('ich_descriptors_tool').enabled() |
| subdir('util/ich_descriptors_tool') |
| endif |