ichspi.c: add FPB (Flash Partition Boundary) macros and init printing
Corresponding to flashrom svn r1361.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
diff --git a/ichspi.c b/ichspi.c
index 7e777f1..f35ea37 100644
--- a/ichspi.c
+++ b/ichspi.c
@@ -131,6 +131,10 @@
#define ICH9_REG_BBAR 0xA0 /* 32 Bits BIOS Base Address Configuration */
#define BBAR_MASK 0x00ffff00 /* 8-23: Bottom of System Flash */
+#define ICH9_REG_FPB 0xD0 /* 32 Bits Flash Partition Boundary */
+#define FPB_FPBA_OFF 0 /* 0-12: Block/Sector Erase Size */
+#define FPB_FPBA (0x1FFF << FPB_FPBA_OFF)
+
// ICH9R SPI commands
#define SPI_OPCODE_TYPE_READ_NO_ADDRESS 0
#define SPI_OPCODE_TYPE_WRITE_NO_ADDRESS 1
@@ -1324,6 +1328,9 @@
ichspi_bbar = mmio_readl(ich_spibar + ICH9_REG_BBAR);
msg_pdbg("0xA0: 0x%08x (BBAR)\n",
ichspi_bbar);
+ tmp = mmio_readl(ich_spibar + ICH9_REG_FPB);
+ msg_pdbg("0xD0: 0x%08x (FPB)\n", tmp);
+
ich_init_opcodes();
break;
default: