blob: d39d686f8b5a077fbf0bee3c9d55f9522287dbf2 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk>
*
* Based on ft2232_spi.c:
*
* Copyright (C) 2011 asbokid <ballymunboy@gmail.com>
* Copyright (C) 2014 Pluto Yang <yangyj.ee@gmail.com>
* Copyright (C) 2015-2016 Stefan Tauner
* Copyright (C) 2015 Urja Rannikko <urjaman@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* The reverse-engineered protocol description was obtained from the
* iceBurn project <https://github.com/davidcarne/iceBurn> by
* David Carne <davidcarne@gmail.com>.
*/
#include <stdlib.h>
#include <string.h>
#include <libusb.h>
#include "programmer.h"
/* This is pretty much arbitrarily chosen. After one second without a
* response we can be pretty sure we're not going to succeed. */
#define USB_TIMEOUT 1000
#define CMD_WRITE_EP 0x01
#define CMD_READ_EP 0x82
#define DATA_WRITE_EP 0x03
#define DATA_READ_EP 0x84
static struct libusb_device_handle *handle = NULL;
static bool reset_board;
#define DIGILENT_VID 0x1443
#define DIGILENT_JTAG_PID 0x0007
static const struct dev_entry devs_digilent_spi[] = {
{ DIGILENT_VID, DIGILENT_JTAG_PID, OK, "Digilent", "Development board JTAG" },
{ 0 },
};
/* Control endpoint commands. */
enum {
GET_BOARD_TYPE = 0xe2,
GET_BOARD_SERIAL = 0xe4,
};
/* Command bulk endpoint command groups. */
enum {
CMD_GPIO = 0x03,
CMD_BOARD = 0x04,
CMD_SPI = 0x06,
};
/* GPIO subcommands. */
enum {
CMD_GPIO_OPEN = 0x00,
CMD_GPIO_CLOSE = 0x01,
CMD_GPIO_SET_DIR = 0x04,
CMD_GPIO_SET_VAL = 0x06,
};
/* Board subcommands. */
enum {
CMD_BOARD_OPEN = 0x00,
CMD_BOARD_CLOSE = 0x01,
CMD_BOARD_SET_REG = 0x04,
CMD_BOARD_GET_REG = 0x05,
CMD_BOARD_PL_STAT = 0x85,
};
/* SPI subcommands. */
enum {
CMD_SPI_OPEN = 0x00,
CMD_SPI_CLOSE = 0x01,
CMD_SPI_SET_SPEED = 0x03,
CMD_SPI_SET_MODE = 0x05,
CMD_SPI_SET_CS = 0x06,
CMD_SPI_START_IO = 0x07,
CMD_SPI_TX_END = 0x87,
};
static int do_command(uint8_t *req, int req_len, uint8_t *res, int res_len)
{
int tx_len = 0;
int ret;
req[0] = req_len - 1;
ret = libusb_bulk_transfer(handle, CMD_WRITE_EP, req, req_len, &tx_len, USB_TIMEOUT);
if (ret) {
msg_perr("Failed to issue a command: '%s'\n", libusb_error_name(ret));
return -1;
}
if (tx_len != req_len) {
msg_perr("Short write issuing a command\n");
return -1;
}
ret = libusb_bulk_transfer(handle, CMD_READ_EP, res, res_len, &tx_len, USB_TIMEOUT);
if (ret) {
msg_perr("Failed to get a response: '%s'\n", libusb_error_name(ret));
return -1;
}
if (tx_len != res_len) {
msg_perr("Short read getting a response\n");
return -1;
}
if (res[0] != res_len -1) {
msg_perr("Response indicates incorrect length.\n");
return -1;
}
return 0;
}
static int gpio_open(void)
{
uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_OPEN, 0x00 };
uint8_t res[2];
return do_command(req, sizeof(req), res, sizeof(res));
}
static int gpio_set_dir(uint8_t direction)
{
uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_SET_DIR, 0x00,
direction, 0x00, 0x00, 0x00 };
uint8_t res[6];
return do_command(req, sizeof(req), res, sizeof(res));
}
static int gpio_set_value(uint8_t value)
{
uint8_t req[] = { 0x00, CMD_GPIO, CMD_GPIO_SET_VAL, 0x00,
value, 0x00, 0x00, 0x00 };
uint8_t res[2];
return do_command(req, sizeof(req), res, sizeof(res));
}
static int spi_open(void)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_OPEN, 0x00 };
uint8_t res[2];
return do_command(req, sizeof(req), res, sizeof(res));
}
static int spi_set_speed(uint32_t speed)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_SPEED, 0x00,
(speed) & 0xff,
(speed >> 8) & 0xff,
(speed >> 16) & 0xff,
(speed >> 24) & 0xff };
uint8_t res[6];
uint32_t real_speed;
int ret;
ret = do_command(req, sizeof(req), res, sizeof(res));
if (ret)
return ret;
real_speed = (res[5] << 24) | (res[4] << 16) | (res[3] << 8) | res[2];
if (real_speed != speed)
msg_pwarn("SPI speed set to %d instead of %d\n", real_speed, speed);
return 0;
}
static int spi_set_mode(uint8_t mode)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_MODE, 0x00, mode };
uint8_t res[2];
return do_command(req, sizeof(req), res, sizeof(res));
}
static int spi_set_cs(uint8_t cs)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_SET_CS, 0x00, cs };
uint8_t res[2];
return do_command(req, sizeof(req), res, sizeof(res));
}
static int spi_start_io(uint8_t read_follows, uint32_t write_len)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_START_IO, 0x00,
0x00, 0x00, /* meaning unknown */
read_follows,
(write_len) & 0xff,
(write_len >> 8) & 0xff,
(write_len >> 16) & 0xff,
(write_len >> 24) & 0xff };
uint8_t res[2];
return do_command(req, sizeof(req), res, sizeof(res));
}
static int spi_tx_end(uint8_t read_follows, uint32_t tx_len)
{
uint8_t req[] = { 0x00, CMD_SPI, CMD_SPI_TX_END, 0x00 };
uint8_t res[read_follows ? 10 : 6];
int ret;
uint32_t count;
ret = do_command(req, sizeof(req), res, sizeof(res));
if (ret != 0)
return ret;
if ((res[1] & 0x80) == 0) {
msg_perr("%s: response missing a write count\n", __func__);
return -1;
}
count = res[2] | (res[3] << 8) | (res[4] << 16) | res[5] << 24;
if (count != tx_len) {
msg_perr("%s: wrote only %d bytes instead of %d\n", __func__, count, tx_len);
return -1;
}
if (read_follows) {
if ((res[1] & 0x40) == 0) {
msg_perr("%s: response missing a read count\n", __func__);
return -1;
}
count = res[6] | (res[7] << 8) | (res[8] << 16) | res[9] << 24;
if (count != tx_len) {
msg_perr("%s: read only %d bytes instead of %d\n", __func__, count, tx_len);
return -1;
}
}
return 0;
}
static int digilent_spi_send_command(const struct flashctx *flash, unsigned int writecnt, unsigned int readcnt,
const unsigned char *writearr, unsigned char *readarr)
{
int ret;
int len = writecnt + readcnt;
int tx_len = 0;
uint8_t buf[len];
uint8_t read_follows = readcnt > 0 ? 1 : 0;
memcpy(buf, writearr, writecnt);
memset(buf + writecnt, 0xff, readcnt);
ret = spi_set_cs(0);
if (ret != 0)
return ret;
ret = spi_start_io(read_follows, writecnt);
if (ret != 0)
return ret;
ret = libusb_bulk_transfer(handle, DATA_WRITE_EP, buf, len, &tx_len, USB_TIMEOUT);
if (ret != 0) {
msg_perr("%s: failed to write data: '%s'\n", __func__, libusb_error_name(ret));
return -1;
}
if (tx_len != len) {
msg_perr("%s: short write\n", __func__);
return -1;
}
if (read_follows) {
ret = libusb_bulk_transfer(handle, DATA_READ_EP, buf, len, &tx_len, USB_TIMEOUT);
if (ret != 0) {
msg_perr("%s: failed to read data: '%s'\n", __func__, libusb_error_name(ret));
return -1;
}
if (tx_len != len) {
msg_perr("%s: short read\n", __func__);
return -1;
}
}
ret = spi_tx_end(read_follows, len);
if (ret != 0)
return ret;
ret = spi_set_cs(1);
if (ret != 0)
return ret;
memcpy(readarr, &buf[writecnt], readcnt);
return 0;
}
static const struct spi_master spi_master_digilent_spi = {
.features = SPI_MASTER_4BA,
.max_data_read = 252,
.max_data_write = 252,
.command = digilent_spi_send_command,
.multicommand = default_spi_send_multicommand,
.read = default_spi_read,
.write_256 = default_spi_write_256,
.write_aai = default_spi_write_aai,
};
static int digilent_spi_shutdown(void *data)
{
if (reset_board)
gpio_set_dir(0);
libusb_close(handle);
handle = NULL;
return 0;
}
static bool default_reset(void)
{
char board[17];
libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR,
GET_BOARD_TYPE, 0, 0,
(unsigned char *)board, sizeof(board) - 1, USB_TIMEOUT);
board[sizeof(board) -1] = '\0';
if (strcmp(board, "iCE40") == 0)
return true;
msg_pwarn("%s: unknown board '%s' not attempting a reset. "
"Override with '-p digilent_spi=reset=1'.\n", __func__, board);
return false;
}
struct digilent_spispeeds {
const char *const name;
const int speed;
};
static const struct digilent_spispeeds spispeeds[] = {
{ "4M", 4000000 },
{ "2M", 2000000 },
{ "1M", 1000000 },
{ "500k", 500000 },
{ "250k", 250000 },
{ "125k", 125000 },
{ "62.5k", 62500 },
{ NULL, 0 },
};
static int digilent_spi_init(void)
{
char *p;
uint32_t speed_hz = spispeeds[0].speed;
int i;
if (handle != NULL) {
msg_cerr("%s: handle already set!\n"
"Please report a bug at flashrom-stable@flashrom.org\n",
__func__);
return -1;
}
int32_t ret = libusb_init(NULL);
if (ret < 0) {
msg_perr("%s: couldn't initialize libusb!\n", __func__);
return -1;
}
#if LIBUSB_API_VERSION < 0x01000106
libusb_set_debug(NULL, 3);
#else
libusb_set_option(NULL, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_INFO);
#endif
uint16_t vid = devs_digilent_spi[0].vendor_id;
uint16_t pid = devs_digilent_spi[0].device_id;
handle = libusb_open_device_with_vid_pid(NULL, vid, pid);
if (handle == NULL) {
msg_perr("%s: couldn't open device %04x:%04x.\n", __func__, vid, pid);
return -1;
}
ret = libusb_claim_interface(handle, 0);
if (ret != 0) {
msg_perr("%s: failed to claim interface 0: '%s'\n", __func__, libusb_error_name(ret));
goto close_handle;
}
p = extract_programmer_param("spispeed");
if (p) {
for (i = 0; spispeeds[i].name; ++i) {
if (!strcasecmp(spispeeds[i].name, p)) {
speed_hz = spispeeds[i].speed;
break;
}
}
if (!spispeeds[i].name) {
msg_perr("Error: Invalid spispeed value: '%s'.\n", p);
free(p);
goto close_handle;
}
free(p);
}
p = extract_programmer_param("reset");
if (p && strlen(p))
reset_board = (p[0] == '1');
else
reset_board = default_reset();
free(p);
if (reset_board) {
if (gpio_open() != 0)
goto close_handle;
if (gpio_set_dir(1) != 0)
goto close_handle;
if (gpio_set_value(0) != 0)
goto close_handle;
}
if (spi_open() != 0)
goto close_handle;
if (spi_set_speed(speed_hz) != 0)
goto close_handle;
if (spi_set_mode(0x00) != 0)
goto close_handle;
register_shutdown(digilent_spi_shutdown, NULL);
register_spi_master(&spi_master_digilent_spi, NULL);
return 0;
close_handle:
libusb_close(handle);
handle = NULL;
return -1;
}
const struct programmer_entry programmer_digilent_spi = {
.name = "digilent_spi",
.type = USB,
.devs.dev = devs_digilent_spi,
.init = digilent_spi_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
.delay = internal_delay,
};