blob: 0028b4cacdd395cc5274cb9e10286b62c6c255ce [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2007, 2008 Carl-Daniel Hailfinger
* Copyright (C) 2008 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the generic SPI framework
*/
#include <stdio.h>
#include <pci/pci.h>
#include <stdint.h>
#include <string.h>
#include "flash.h"
#include "spi.h"
void spi_prettyprint_status_register(struct flashchip *flash);
int spi_command(unsigned int writecnt, unsigned int readcnt,
const unsigned char *writearr, unsigned char *readarr)
{
switch (flashbus) {
case BUS_TYPE_IT87XX_SPI:
return it8716f_spi_command(writecnt, readcnt, writearr,
readarr);
case BUS_TYPE_ICH7_SPI:
case BUS_TYPE_ICH9_SPI:
case BUS_TYPE_VIA_SPI:
return ich_spi_command(writecnt, readcnt, writearr, readarr);
default:
printf_debug
("%s called, but no SPI chipset/strapping detected\n",
__FUNCTION__);
}
return 1;
}
static int spi_rdid(unsigned char *readarr, int bytes)
{
const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID };
if (spi_command(sizeof(cmd), bytes, cmd, readarr))
return 1;
printf_debug("RDID returned %02x %02x %02x.\n", readarr[0], readarr[1],
readarr[2]);
return 0;
}
static int spi_res(unsigned char *readarr)
{
const unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 };
if (spi_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr))
return 1;
printf_debug("RES returned %02x.\n", readarr[0]);
return 0;
}
void spi_write_enable()
{
const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN };
/* Send WREN (Write Enable) */
spi_command(sizeof(cmd), 0, cmd, NULL);
}
void spi_write_disable()
{
const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI };
/* Send WRDI (Write Disable) */
spi_command(sizeof(cmd), 0, cmd, NULL);
}
static int probe_spi_rdid_generic(struct flashchip *flash, int bytes)
{
unsigned char readarr[4];
uint32_t manuf_id;
uint32_t model_id;
if (spi_rdid(readarr, bytes))
return 0;
if (!oddparity(readarr[0]))
printf_debug("RDID byte 0 parity violation.\n");
/* Check if this is a continuation vendor ID */
if (readarr[0] == 0x7f) {
if (!oddparity(readarr[1]))
printf_debug("RDID byte 1 parity violation.\n");
manuf_id = (readarr[0] << 8) | readarr[1];
model_id = readarr[2];
if (bytes > 3) {
model_id <<= 8;
model_id |= readarr[3];
}
} else {
manuf_id = readarr[0];
model_id = (readarr[1] << 8) | readarr[2];
}
printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id,
model_id);
if (manuf_id == flash->manufacture_id && model_id == flash->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
/* Test if this is a pure vendor match. */
if (manuf_id == flash->manufacture_id &&
GENERIC_DEVICE_ID == flash->model_id)
return 1;
return 0;
}
int probe_spi_rdid(struct flashchip *flash)
{
return probe_spi_rdid_generic(flash, 3);
}
/* support 4 bytes flash ID */
int probe_spi_rdid4(struct flashchip *flash)
{
/* only some SPI chipsets support 4 bytes commands */
switch (flashbus) {
case BUS_TYPE_ICH7_SPI:
case BUS_TYPE_ICH9_SPI:
case BUS_TYPE_VIA_SPI:
return probe_spi_rdid_generic(flash, 4);
default:
printf_debug("4b ID not supported on this SPI controller\n");
}
return 0;
}
int probe_spi_res(struct flashchip *flash)
{
unsigned char readarr[3];
uint32_t model_id;
if (spi_rdid(readarr, 3))
/* We couldn't issue RDID, it's pointless to try RES. */
return 0;
/* Check if RDID returns 0xff 0xff 0xff, then we use RES. */
if ((readarr[0] != 0xff) || (readarr[1] != 0xff) ||
(readarr[2] != 0xff))
return 0;
if (spi_res(readarr))
return 0;
model_id = readarr[0];
printf_debug("%s: id 0x%x\n", __FUNCTION__, model_id);
if (model_id != flash->model_id)
return 0;
/* Print the status register to tell the
* user about possible write protection.
*/
spi_prettyprint_status_register(flash);
return 1;
}
uint8_t spi_read_status_register()
{
const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR };
unsigned char readarr[JEDEC_RDSR_INSIZE];
/* Read Status Register */
spi_command(sizeof(cmd), sizeof(readarr), cmd, readarr);
return readarr[0];
}
/* Prettyprint the status register. Common definitions.
*/
void spi_prettyprint_status_register_common(uint8_t status)
{
printf_debug("Chip status register: Bit 5 / Block Protect 3 (BP3) is "
"%sset\n", (status & (1 << 5)) ? "" : "not ");
printf_debug("Chip status register: Bit 4 / Block Protect 2 (BP2) is "
"%sset\n", (status & (1 << 4)) ? "" : "not ");
printf_debug("Chip status register: Bit 3 / Block Protect 1 (BP1) is "
"%sset\n", (status & (1 << 3)) ? "" : "not ");
printf_debug("Chip status register: Bit 2 / Block Protect 0 (BP0) is "
"%sset\n", (status & (1 << 2)) ? "" : "not ");
printf_debug("Chip status register: Write Enable Latch (WEL) is "
"%sset\n", (status & (1 << 1)) ? "" : "not ");
printf_debug("Chip status register: Write In Progress (WIP/BUSY) is "
"%sset\n", (status & (1 << 0)) ? "" : "not ");
}
/* Prettyprint the status register. Works for
* ST M25P series
* MX MX25L series
*/
void spi_prettyprint_status_register_st_m25p(uint8_t status)
{
printf_debug("Chip status register: Status Register Write Disable "
"(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not ");
printf_debug("Chip status register: Bit 6 is "
"%sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
}
/* Prettyprint the status register. Works for
* SST 25VF016
*/
void spi_prettyprint_status_register_sst25vf016(uint8_t status)
{
const char *bpt[] = {
"none",
"1F0000H-1FFFFFH",
"1E0000H-1FFFFFH",
"1C0000H-1FFFFFH",
"180000H-1FFFFFH",
"100000H-1FFFFFH",
"all", "all"
};
printf_debug("Chip status register: Block Protect Write Disable "
"(BPL) is %sset\n", (status & (1 << 7)) ? "" : "not ");
printf_debug("Chip status register: Auto Address Increment Programming "
"(AAI) is %sset\n", (status & (1 << 6)) ? "" : "not ");
spi_prettyprint_status_register_common(status);
printf_debug("Resulting block protection : %s\n",
bpt[(status & 0x1c) >> 2]);
}
void spi_prettyprint_status_register(struct flashchip *flash)
{
uint8_t status;
status = spi_read_status_register();
printf_debug("Chip status register is %02x\n", status);
switch (flash->manufacture_id) {
case ST_ID:
if (((flash->model_id & 0xff00) == 0x2000) ||
((flash->model_id & 0xff00) == 0x2500))
spi_prettyprint_status_register_st_m25p(status);
break;
case MX_ID:
if ((flash->model_id & 0xff00) == 0x2000)
spi_prettyprint_status_register_st_m25p(status);
break;
case SST_ID:
if (flash->model_id == SST_25VF016B)
spi_prettyprint_status_register_sst25vf016(status);
break;
}
}
int spi_chip_erase_c7(struct flashchip *flash)
{
const unsigned char cmd[JEDEC_CE_C7_OUTSIZE] = { JEDEC_CE_C7 };
spi_disable_blockprotect();
spi_write_enable();
/* Send CE (Chip Erase) */
spi_command(sizeof(cmd), 0, cmd, NULL);
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 1-85 s, so wait in 1 s steps.
*/
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
sleep(1);
return 0;
}
/* Block size is usually
* 64k for Macronix
* 32k for SST
* 4-32k non-uniform for EON
*/
int spi_block_erase_d8(const struct flashchip *flash, unsigned long addr)
{
unsigned char cmd[JEDEC_BE_D8_OUTSIZE] = { JEDEC_BE_D8 };
cmd[1] = (addr & 0x00ff0000) >> 16;
cmd[2] = (addr & 0x0000ff00) >> 8;
cmd[3] = (addr & 0x000000ff);
spi_write_enable();
/* Send BE (Block Erase) */
spi_command(sizeof(cmd), 0, cmd, NULL);
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 100-4000 ms, so wait in 100 ms steps.
*/
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
usleep(100 * 1000);
return 0;
}
/* Sector size is usually 4k, though Macronix eliteflash has 64k */
int spi_sector_erase(const struct flashchip *flash, unsigned long addr)
{
unsigned char cmd[JEDEC_SE_OUTSIZE] = { JEDEC_SE };
cmd[1] = (addr & 0x00ff0000) >> 16;
cmd[2] = (addr & 0x0000ff00) >> 8;
cmd[3] = (addr & 0x000000ff);
spi_write_enable();
/* Send SE (Sector Erase) */
spi_command(sizeof(cmd), 0, cmd, NULL);
/* Wait until the Write-In-Progress bit is cleared.
* This usually takes 15-800 ms, so wait in 10 ms steps.
*/
while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
usleep(10 * 1000);
return 0;
}
/*
* This is according the SST25VF016 datasheet, who knows it is more
* generic that this...
*/
void spi_write_status_register(int status)
{
const unsigned char cmd[JEDEC_WRSR_OUTSIZE] =
{ JEDEC_WRSR, (unsigned char)status };
/* Send WRSR (Write Status Register) */
spi_command(sizeof(cmd), 0, cmd, NULL);
}
void spi_byte_program(int address, uint8_t byte)
{
const unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE] = {
JEDEC_BYTE_PROGRAM,
(address >> 16) & 0xff,
(address >> 8) & 0xff,
(address >> 0) & 0xff,
byte
};
/* Send Byte-Program */
spi_command(sizeof(cmd), 0, cmd, NULL);
}
void spi_disable_blockprotect(void)
{
uint8_t status;
status = spi_read_status_register();
/* If there is block protection in effect, unprotect it first. */
if ((status & 0x3c) != 0) {
printf_debug("Some block protection in effect, disabling\n");
spi_write_enable();
spi_write_status_register(status & ~0x3c);
}
}
void spi_nbyte_read(int address, uint8_t *bytes, int len)
{
const unsigned char cmd[JEDEC_READ_OUTSIZE] = {
JEDEC_READ,
(address >> 16) & 0xff,
(address >> 8) & 0xff,
(address >> 0) & 0xff,
};
/* Send Read */
spi_command(sizeof(cmd), len, cmd, bytes);
}
int spi_chip_read(struct flashchip *flash, uint8_t *buf)
{
switch (flashbus) {
case BUS_TYPE_IT87XX_SPI:
return it8716f_spi_chip_read(flash, buf);
case BUS_TYPE_ICH7_SPI:
case BUS_TYPE_ICH9_SPI:
case BUS_TYPE_VIA_SPI:
return ich_spi_read(flash, buf);
default:
printf_debug
("%s called, but no SPI chipset/strapping detected\n",
__FUNCTION__);
}
return 1;
}
int spi_chip_write(struct flashchip *flash, uint8_t *buf)
{
switch (flashbus) {
case BUS_TYPE_IT87XX_SPI:
return it8716f_spi_chip_write(flash, buf);
case BUS_TYPE_ICH7_SPI:
case BUS_TYPE_ICH9_SPI:
case BUS_TYPE_VIA_SPI:
return ich_spi_write(flash, buf);
default:
printf_debug
("%s called, but no SPI chipset/strapping detected\n",
__FUNCTION__);
}
return 1;
}