Gitiles
Code Review Sign In
review.sourcearcade.org / flashprog / b2ecf6c9eb02257ff6eaa4f3fc959c49e7eca201 / . / flashchips.c
blob: e97786fe07a7cbf1d79c8c7c8eaeb9e0824cebe1 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2000 Silicon Integrated System Corporation
* Copyright (C) 2004 Tyan Corp
* Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org>
* Copyright (C) 2006-2009 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "flash.h"
#include "flashchips.h"
/**
* List of supported flash chips.
*
* Please keep the list sorted by vendor name and chip name, so that
* the output of 'flashrom -L' is alphabetically sorted.
*/
struct flashchip flashchips[] = {
/*
* .vendor = Vendor name
* .name = Chip name
* .bustype = Supported flash bus types (Parallel, LPC...)
* .manufacture_id = Manufacturer chip ID
* .model_id = Model chip ID
* .total_size = Total size in (binary) kbytes
* .page_size = Page or eraseblock(?) size in bytes
* .tested = Test status
* .probe = Probe function
* .probe_timing = Probe function delay
* .erase = Chip erase function
* .block_erasers[] = Array of erase layouts and erase functions
* {
* .eraseblocks[] = Array of { blocksize, blockcount }
* .block_erase = Block erase function
* }
* .write = Chip write function
* .read = Chip read function
*/
{
.vendor = "AMD",
.name = "Am29F010A/B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29F010B, /* Same as Am29F010A */
.total_size = 128,
.page_size = 16 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_29f040b,
.probe_timing = TIMING_ZERO,
.erase = erase_29f040b,
.write = write_pm29f002,
.read = read_memmapped,
},
{
.vendor = "AMD",
.name = "Am29F002(N)BB",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29F002BB,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.erase = erase_chip_jedec,
.write = write_en29f002a,
.read = read_memmapped,
},
{
.vendor = "AMD",
.name = "Am29F002(N)BT",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29F002BT,
.total_size = 256,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.erase = erase_chip_jedec,
.write = write_en29f002a,
.read = read_memmapped,
},
{
.vendor = "AMD",
.name = "Am29F016D",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29F016D,
.total_size = 2048,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_29f040b,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */
.erase = erase_29f040b,
.write = write_29f040b,
.read = read_memmapped,
},
{
.vendor = "AMD",
.name = "Am29F040B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29F040B,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_29f040b,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */
.erase = erase_29f040b,
.write = write_29f040b,
.read = read_memmapped,
},
{
.vendor = "AMD",
.name = "Am29F080B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29F080B,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.erase = erase_29f040b,
.write = write_29f040b,
.read = read_memmapped,
},
{
.vendor = "AMD",
.name = "Am29LV040B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29LV040B,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_29f040b,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */
.erase = erase_29f040b,
.write = write_29f040b,
.read = read_memmapped,
},
{
.vendor = "AMD",
.name = "Am29LV081B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AM_29LV080B,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_29f040b,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */
.erase = erase_29f040b,
.write = write_29f040b,
.read = read_memmapped,
},
{
.vendor = "ASD",
.name = "AE49F2008",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ASD_ID,
.model_id = ASD_AE49F2008,
.total_size = 256,
.page_size = 128,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_FIXME,
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "AT25DF021",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25DF021,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25DF041A",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25DF041A,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25DF081",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25DF081,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25DF161",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25DF161,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25DF321",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25DF321,
.total_size = 4096,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25DF321A",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25DF321A,
.total_size = 4096,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25DF641",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25DF641,
.total_size = 8192,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25F512B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25F512B,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25FS010",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25FS010,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT25FS040",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_25FS040,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT26DF041",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_26DF041,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL /* Incompatible Page write */,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT26DF081A",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_26DF081A,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT26DF161",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_26DF161,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT26DF161A",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_26DF161A,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
/*The AT26DF321 has the same ID as the AT25DF321. */
/*{
.vendor = "Atmel",
.name = "AT26DF321",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_26DF321,
.total_size = 4096,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},*/
{
.vendor = "Atmel",
.name = "AT26F004",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_26F004,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = NULL /* Incompatible Page write */,
.read = spi_chip_read,
},
{
.vendor = "Atmel",
.name = "AT29C512",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = AT_29C512,
.total_size = 64,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10000, /* 10mS, Enter=Exec */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "AT29C010A",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = AT_29C010A,
.total_size = 128,
.page_size = 128,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = 10000, /* 10mS, Enter=Exec */
.erase = erase_chip_jedec,
.write = write_jedec, /* FIXME */
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "AT29C020",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = AT_29C020,
.total_size = 256,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10000, /* 10ms */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "AT29C040A",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = AT_29C040A,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10000, /* 10 ms */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "AT45CS1282",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45CS1282,
.total_size = 16896 /* No power of two sizes */,
.page_size = 1056 /* No power of two sizes */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL /* Incompatible Page write */,
.read = NULL /* Incompatible read */,
},
{
.vendor = "Atmel",
.name = "AT45DB011D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB011D,
.total_size = 128 /* Size can only be determined from status register */,
.page_size = 256 /* Size can only be determined from status register */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "AT45DB021D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB021D,
.total_size = 256 /* Size can only be determined from status register */,
.page_size = 256 /* Size can only be determined from status register */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "AT45DB041D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB041D,
.total_size = 512 /* Size can only be determined from status register */,
.page_size = 256 /* Size can only be determined from status register */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "AT45DB081D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB081D,
.total_size = 1024 /* Size can only be determined from status register */,
.page_size = 256 /* Size can only be determined from status register */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "AT45DB161D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB161D,
.total_size = 2048 /* Size can only be determined from status register */,
.page_size = 512 /* Size can only be determined from status register */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "AT45DB321C",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB321C,
.total_size = 4224 /* No power of two sizes */,
.page_size = 528 /* No power of two sizes */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL /* Incompatible read */,
},
{
.vendor = "Atmel",
.name = "AT45DB321D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB321D,
.total_size = 4096 /* Size can only be determined from status register */,
.page_size = 512 /* Size can only be determined from status register */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "AT45DB642D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = AT_45DB642D,
.total_size = 8192 /* Size can only be determined from status register */,
.page_size = 1024 /* Size can only be determined from status register */,
.tested = TEST_BAD_READ,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "AT49BV512",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = AT_49BV512,
.total_size = 64,
.page_size = 64,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "AT49F002(N)",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = AT_49F002N,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "AT49F002(N)T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = AT_49F002NT,
.total_size = 256,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "AMIC",
.name = "A25L40P",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L40P,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "AMIC",
.name = "A29002B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A29002B,
.total_size = 256,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_29f002,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.write = write_29f002,
.read = read_memmapped,
},
{
.vendor = "AMIC",
.name = "A29002T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A29002T,
.total_size = 256,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_29f002,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.write = write_29f002,
.read = read_memmapped,
},
{
.vendor = "AMIC",
.name = "A29040B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A29040B,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PR,
.probe = probe_29f040b,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */
.erase = erase_29f040b,
.write = write_29f040b,
.read = read_memmapped,
},
{
.vendor = "AMIC",
.name = "A49LF040A",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A49LF040A,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_49fl00x,
.probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */
.erase = erase_49fl00x,
.write = write_49fl00x,
.read = read_memmapped,
},
{
.vendor = "EMST",
.name = "F49B002UA",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = EMST_ID,
.model_id = EMST_F49B002UA,
.total_size = 256,
.page_size = 4096,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Eon",
.name = "EN25B05",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B05,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25B10",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B10,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25B20",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25B40",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B40,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25B80",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25B16",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25B32",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B32,
.total_size = 4096,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25B64",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25B64,
.total_size = 8192,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25D16",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25D16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25F05",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25F05,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25F10",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25F10,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25F20",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25F20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25F40",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25F40,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PROBE,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25F80",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25F80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25F16",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25F16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Eon",
.name = "EN25F32",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EN_25F32,
.total_size = 4096,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "EON",
.name = "EN29F002(A)(N)B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EN_29F002B,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_en29f002a,
.read = read_memmapped,
},
{
.vendor = "EON",
.name = "EN29F002(A)(N)T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EN_29F002T,
.total_size = 256,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_en29f002a,
.read = read_memmapped,
},
{
.vendor = "Fujitsu",
.name = "MBM29F004BC",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = MBM29F004BC,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = NULL,
.write = NULL,
.read = read_memmapped,
},
{
.vendor = "Fujitsu",
.name = "MBM29F004TC",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = MBM29F004TC,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = NULL,
.write = NULL,
.read = read_memmapped,
},
{
.vendor = "Fujitsu",
.name = "MBM29F400BC",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = MBM29F400BC,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_m29f400bt,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */
.erase = erase_m29f400bt,
.write = write_coreboot_m29f400bt,
.read = read_memmapped,
},
{
.vendor = "Fujitsu",
.name = "MBM29F400TC",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = MBM29F400TC,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_m29f400bt,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */
.erase = erase_m29f400bt,
.write = write_coreboot_m29f400bt,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "28F001BX-B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = P28F001BXB,
.total_size = 128,
.page_size = 128 * 1024, /* 8k + 2x4k + 112k */
.tested = TEST_BAD_ERASE|TEST_BAD_WRITE,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = NULL,
.write = NULL,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "28F001BX-T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = P28F001BXT,
.total_size = 128,
.page_size = 128 * 1024, /* 112k + 2x4k + 8k */
.tested = TEST_OK_PR|TEST_BAD_ERASE|TEST_BAD_WRITE,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = NULL,
.write = NULL,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "82802AB",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = INTEL_ID,
.model_id = I_82802AB,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */
.erase = erase_82802ab,
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "82802AC",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = INTEL_ID,
.model_id = I_82802AC,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */
.erase = erase_82802ab,
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Macronix",
.name = "MX25L512",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L512,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L1005",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L1005,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L2005",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L2005,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L4005",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L4005,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PRW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L8005",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L8005,
.total_size = 1024,
.page_size = 256,
.tested = TEST_OK_PRW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L1605",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L1605,
.total_size = 2048,
.page_size = 256,
.tested = TEST_OK_PRW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20, /* This erase function has 64k blocksize for eLiteFlash */
}, {
.eraseblocks = { {64 * 1024, 32} }, /* Not supported in MX25L1605 (eLiteFlash) and MX25L1605D */
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L1635D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L1635D,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L3205",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L3205,
.total_size = 4096,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L3235D",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L3235D,
.total_size = 4096,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L6405",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L6405,
.total_size = 8192,
.page_size = 256,
.tested = TEST_OK_PROBE,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX25L12805",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = MX_25L12805,
.total_size = 16384,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Macronix",
.name = "MX29F001B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = MX_ID,
.model_id = MX_29F001B,
.total_size = 128,
.page_size = 32 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_29f002,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.write = write_29f002,
.read = read_memmapped,
},
{
.vendor = "Macronix",
.name = "MX29F001T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = MX_ID,
.model_id = MX_29F001T,
.total_size = 128,
.page_size = 32 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_29f002,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.write = write_29f002,
.read = read_memmapped,
},
{
.vendor = "Macronix",
.name = "MX29F002B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = MX_ID,
.model_id = MX_29F002B,
.total_size = 256,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_29f002,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.write = write_29f002,
.read = read_memmapped,
},
{
.vendor = "Macronix",
.name = "MX29F002T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = MX_ID,
.model_id = MX_29F002T,
.total_size = 256,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_29f002,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.write = write_29f002,
.read = read_memmapped,
},
{
.vendor = "Macronix",
.name = "MX29LV040",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = MX_ID,
.model_id = MX_29LV040,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PR,
.probe = probe_29f002,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (mx29f002.c) */
.erase = erase_29f002,
.write = write_29f002,
.read = read_memmapped,
},
{
.vendor = "Numonyx",
.name = "M25PE10",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE10,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_d8,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Numonyx",
.name = "M25PE20",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_d8,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Numonyx",
.name = "M25PE40",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE40,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_d8,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Numonyx",
.name = "M25PE80",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_d8,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Numonyx",
.name = "M25PE16",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_d8,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "PMC",
.name = "Pm25LV010",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_25LV010,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "PMC",
.name = "Pm25LV016B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_25LV016B,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "PMC",
.name = "Pm25LV020",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_25LV020,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "PMC",
.name = "Pm25LV040",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_25LV040,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "PMC",
.name = "Pm25LV080B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_25LV080B,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "PMC",
.name = "Pm25LV512",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_25LV512,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "PMC",
.name = "Pm29F0002T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_29F002T,
.total_size = 256,
.page_size = 8192,
.tested = TEST_OK_PREW,
.probe = probe_29f040b,
.probe_timing = TIMING_FIXME,
.erase = erase_29f040b,
.write = write_pm29f002,
.read = read_memmapped,
},
{
.vendor = "PMC",
.name = "Pm29F0002B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_29F002B,
.total_size = 256,
.page_size = 8192,
.tested = TEST_UNTESTED,
.probe = probe_29f040b,
.probe_timing = TIMING_FIXME,
.erase = erase_29f040b,
.write = write_pm29f002,
.read = read_memmapped,
},
{
.vendor = "PMC",
.name = "Pm39LV010",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_39F010,
.total_size = 128,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "PMC",
.name = "Pm49FL002",
.bustype = CHIP_BUSTYPE_LPC|CHIP_BUSTYPE_FWH, /* A/A Mux*/
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_49FL002,
.total_size = 256,
.page_size = 16 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_49fl00x,
.probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */
.erase = erase_49fl00x,
.write = write_49fl00x,
.read = read_memmapped,
},
{
.vendor = "PMC",
.name = "Pm49FL004",
.bustype = CHIP_BUSTYPE_LPC|CHIP_BUSTYPE_FWH, /* A/A Mux*/
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_49FL004,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_49fl00x,
.probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */
.erase = erase_49fl00x,
.write = write_49fl00x,
.read = read_memmapped,
},
{
.vendor = "Sharp",
.name = "LHF00L04",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SHARP_ID,
.model_id = SHARP_LHF00L04,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_lhf00l04,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sharplhf00l04.c) */
.erase = erase_lhf00l04,
.write = write_lhf00l04,
.read = read_memmapped,
},
{
.vendor = "Spansion",
.name = "S25FL016A",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL016A,
.total_size = 2048,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "SST",
.name = "SST25VF016B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = SST_25VF016B,
.total_size = 2048,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_1,
.read = spi_chip_read,
},
{
.vendor = "SST",
.name = "SST25VF032B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = SST_25VF032B,
.total_size = 4096,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_1,
.read = spi_chip_read,
},
{
.vendor = "SST",
.name = "SST25VF040B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = SST_25VF040B,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_1,
.read = spi_chip_read,
},
{
.vendor = "SST",
.name = "SST25VF040.REMS",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = SST_25VF040_REMS,
.total_size = 512,
.page_size = 64*1024,
.tested = TEST_OK_PR,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60,
.write = spi_chip_write_1,
.read = spi_chip_read,
},
{
.vendor = "SST",
.name = "SST25VF040B.REMS",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = SST_25VF040B_REMS,
.total_size = 512,
.page_size = 64*1024,
.tested = TEST_OK_PR,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_1,
.read = spi_chip_read,
},
{
.vendor = "SST",
.name = "SST25VF080B",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = SST_25VF080B,
.total_size = 1024,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_60_c7,
.write = spi_chip_write_1,
.read = spi_chip_read,
},
{
.vendor = "SST",
.name = "SST28SF040A",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_28SF040,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_28sf040,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst28sf040.c) */
.erase = erase_28sf040,
.write = write_28sf040,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST29EE010",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_29EE010,
.total_size = 128,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST29LE010",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_29LE010,
.total_size = 128,
.page_size = 128,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST29EE020A",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_29EE020A,
.total_size = 256,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST29LE020",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_29LE020,
.total_size = 256,
.page_size = 128,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39SF010A",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39SF010,
.total_size = 128,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39SF020A",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39SF020,
.total_size = 256,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39SF040",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39SF040,
.total_size = 512,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39VF512",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39VF512,
.total_size = 64,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns*/
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39VF010",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39VF010,
.total_size = 128,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39VF020",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39VF020,
.total_size = 256,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39VF040",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39VF040,
.total_size = 512,
.page_size = 4096,
.tested = TEST_OK_PROBE,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST39VF080",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_39VF080,
.total_size = 1024,
.page_size = 4096,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF002A/B",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF002A,
.total_size = 256,
.page_size = 16 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_sst_fwhub,
.probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */
.erase = erase_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF003A/B",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF003A,
.total_size = 384,
.page_size = 64 * 1024,
.tested = TEST_OK_PR,
.probe = probe_sst_fwhub,
.probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */
.erase = erase_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
/* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB)
* and is only honored for 64k block erase, but not 4k sector erase.
*/
.vendor = "SST",
.name = "SST49LF004A/B",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF004A,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_sst_fwhub,
.probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */
.erase = NULL,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec, /* missing unlock */
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sst_fwhub_block, /* same as erase_block_jedec, but with unlock */
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only in PP mode */
},
},
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF004C",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = SST_ID,
.model_id = SST_49LF004C,
.total_size = 512,
.page_size = 4 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_49lfxxxc,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */
.erase = erase_49lfxxxc,
.write = write_49lfxxxc,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF008A",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF008A,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_sst_fwhub,
.probe_timing = 1, /* 150 ns | routine is wrapper to probe_jedec (sst_fwhub.c) */
.erase = erase_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF008C",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = SST_ID,
.model_id = SST_49LF008C,
.total_size = 1024,
.page_size = 4 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_49lfxxxc,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */
.erase = erase_49lfxxxc,
.write = write_49lfxxxc,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF016C",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = SST_ID,
.model_id = SST_49LF016C,
.total_size = 2048,
.page_size = 4 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_49lfxxxc,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */
.erase = erase_49lfxxxc,
.write = write_49lfxxxc,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF020",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = SST_ID,
.model_id = SST_49LF020,
.total_size = 256,
.page_size = 16 * 1024,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_49lf040,
.write = write_49lf040,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF020A",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = SST_ID,
.model_id = SST_49LF020A,
.total_size = 256,
.page_size = 4 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_49lf040,
.write = write_49lf040,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF040",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = SST_ID,
.model_id = SST_49LF040,
.total_size = 512,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.erase = erase_49lf040,
.write = write_49lf040,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF040B",
.bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF040B,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_sst_fwhub,
.probe_timing = 1, /* 150ns | routine is wrapper to probe_jedec (sst_fwhub.c) */
.erase = erase_sst_fwhub,
.write = write_sst_fwhub,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF080A",
.bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_49LF080A,
.total_size = 1024,
.page_size = 4096,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_FIXME,
.erase = erase_49lf040,
.write = write_49lf040,
.read = read_memmapped,
},
{
.vendor = "SST",
.name = "SST49LF160C",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = SST_ID,
.model_id = SST_49LF160C,
.total_size = 2048,
.page_size = 4 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_49lfxxxc,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */
.erase = erase_49lfxxxc,
.write = write_49lfxxxc,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M25P05-A",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P05A,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
/* The ST M25P05 is a bit of a problem. It has the same ID as the
* ST M25P05-A in RES mode, but supports only 128 byte writes instead
* of 256 byte writes. We rely heavily on the fact that probe_spi_res
* only is successful if RDID does not work.
*/
{
.vendor = "ST",
.name = "M25P05.RES",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P05_RES,
.total_size = 64,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_res,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_1, /* 128 */
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P10-A",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P10A,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
/* The ST M25P10 has the same problem as the M25P05. */
{
.vendor = "ST",
.name = "M25P10.RES",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P10_RES,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_res,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_1, /* 128 */
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P20",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P40",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P40,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P40-old",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P40_RES,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_res,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P80",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P16",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P32",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P32,
.total_size = 4096,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P64",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P64,
.total_size = 8192,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M25P128",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P128,
.total_size = 16384,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "ST",
.name = "M29F002B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F002B,
.total_size = 256,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_m29f002,
.write = write_m29f002b,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M29F002T/NT",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F002T,
.total_size = 256,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_m29f002,
.write = write_m29f002t,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M29F040B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F040B,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_29f040b,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (am29f040b.c) */
.erase = erase_29f040b,
.write = write_29f040b,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M29F400BT",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F400BT,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_m29f400bt,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (m29f400bt.c) */
.erase = erase_m29f400bt,
.write = write_coreboot_m29f400bt,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M29W010B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29W010B,
.total_size = 128,
.page_size = 16 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M29W040B",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29W040B,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FLW040A",
.bustype = CHIP_BUSTYPE_FWH|CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW040A,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_stm50flw0x0x,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */
.erase = erase_stm50flw0x0x,
.write = write_stm50flw0x0x,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FLW040B",
.bustype = CHIP_BUSTYPE_FWH|CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW040B,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_stm50flw0x0x,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */
.erase = erase_stm50flw0x0x,
.write = write_stm50flw0x0x,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FLW080A",
.bustype = CHIP_BUSTYPE_FWH|CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW080A,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_stm50flw0x0x,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */
.erase = erase_stm50flw0x0x,
.write = write_stm50flw0x0x,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FLW080B",
.bustype = CHIP_BUSTYPE_FWH|CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW080B,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_stm50flw0x0x,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (stm50flw0x0x.c) */
.erase = erase_stm50flw0x0x,
.write = write_stm50flw0x0x,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FW002",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW002,
.total_size = 256,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_49lfxxxc,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (sst49lfxxxc.c) */
.erase = NULL,
.write = NULL,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FW016",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW016,
.total_size = 2048,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */
.erase = erase_82802ab,
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FW040",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW040,
.total_size = 512,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */
.erase = erase_82802ab,
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50FW080",
.bustype = CHIP_BUSTYPE_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW080,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */
.erase = erase_82802ab,
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "ST",
.name = "M50LPW116",
.bustype = CHIP_BUSTYPE_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50LPW116,
.total_size = 2048,
.page_size = 64 * 1024,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "SyncMOS",
.name = "S29C31004T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SYNCMOS_ID,
.model_id = S29C31004T,
.total_size = 512,
.page_size = 128,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SyncMOS",
.name = "S29C51001T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SYNCMOS_ID,
.model_id = S29C51001T,
.total_size = 128,
.page_size = 128,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SyncMOS",
.name = "S29C51002T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SYNCMOS_ID,
.model_id = S29C51002T,
.total_size = 256,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "SyncMOS",
.name = "S29C51004T",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = SYNCMOS_ID,
.model_id = S29C51004T,
.total_size = 512,
.page_size = 128,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "TI",
.name = "TMS29F002RB",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = TI_OLD_ID,
.model_id = TI_TMS29F002RB,
.total_size = 256,
.page_size = 16384, /* Non-uniform sectors */
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = NULL,
.write = NULL,
.read = read_memmapped,
},
{
.vendor = "TI",
.name = "TMS29F002RT",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = TI_OLD_ID,
.model_id = TI_TMS29F002RT,
.total_size = 256,
.page_size = 16384, /* Non-uniform sectors */
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.erase = NULL,
.write = NULL,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W25x10",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = W_25X10,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Winbond",
.name = "W25x20",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = W_25X20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Winbond",
.name = "W25x40",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = W_25X40,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Winbond",
.name = "W25x80",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = W_25X80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Winbond",
.name = "W25x16",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = W_25X16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_OK_PR,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = spi_chip_erase_c7,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Winbond",
.name = "W29C011",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = W_29C011,
.total_size = 128,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10, /* used datasheet for the W29C011A */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W29C020C",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = W_29C020C,
.total_size = 256,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W29C040P",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = W_29C040P,
.total_size = 512,
.page_size = 256,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W29EE011",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = W_29C011,
.total_size = 128,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_w29ee011,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w29ee011.c) */
.erase = erase_chip_jedec,
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W39V040A",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = WINBOND_ID,
.model_id = W_39V040A,
.total_size = 512,
.page_size = 64*1024,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W39V040B",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = WINBOND_ID,
.model_id = W_39V040B,
.total_size = 512,
.page_size = 64*1024,
.tested = TEST_OK_PR | TEST_BAD_ERASE | TEST_BAD_WRITE,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W39V040C",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = WINBOND_ID,
.model_id = W_39V040C,
.total_size = 512,
.page_size = 64*1024,
.tested = TEST_OK_PREW,
.probe = probe_w39v040c,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w39v040c.c) */
.erase = erase_w39v040c,
.write = write_w39v040c,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W39V040FA",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = WINBOND_ID,
.model_id = W_39V040FA,
.total_size = 512,
.page_size = 64*1024,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W39V080A",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = WINBOND_ID,
.model_id = W_39V080A,
.total_size = 1024,
.page_size = 64*1024,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W49F002U",
.bustype = CHIP_BUSTYPE_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = W_49F002U,
.total_size = 256,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W49V002A",
.bustype = CHIP_BUSTYPE_LPC,
.manufacture_id = WINBOND_ID,
.model_id = W_49V002A,
.total_size = 256,
.page_size = 128,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W49V002FA",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = WINBOND_ID,
.model_id = W_49V002FA,
.total_size = 256,
.page_size = 128,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.erase = erase_chip_jedec,
.write = write_49f002,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W39V080FA",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = WINBOND_ID,
.model_id = W_39V080FA,
.total_size = 1024,
.page_size = 64*1024,
.tested = TEST_OK_PREW,
.probe = probe_winbond_fwhub,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w39v080fa.c) */
.erase = erase_winbond_fwhub,
.write = write_winbond_fwhub,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W39V080FA (dual mode)",
.bustype = CHIP_BUSTYPE_FWH,
.manufacture_id = WINBOND_ID,
.model_id = W_39V080FA_DM,
.total_size = 512,
.page_size = 64*1024,
.tested = TEST_UNTESTED,
.probe = probe_winbond_fwhub,
.probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (w39v080fa.c) */
.erase = erase_winbond_fwhub,
.write = write_winbond_fwhub,
.read = read_memmapped,
},
{
.vendor = "Atmel",
.name = "unknown Atmel SPI chip",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ATMEL_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "EON",
.name = "unknown EON SPI chip",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Macronix",
.name = "unknown Macronix SPI chip",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = MX_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "PMC",
.name = "unknown PMC SPI chip",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = PMC_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "SST",
.name = "unknown SST SPI chip",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = SST_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "ST",
.name = "unknown ST SPI chip",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = ST_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.erase = NULL,
.write = NULL,
.read = NULL,
},
{
.vendor = "Generic",
.name = "unknown SPI chip (RDID)",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = GENERIC_MANUF_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.erase = NULL,
.write = NULL,
},
{
.vendor = "Generic",
.name = "unknown SPI chip (REMS)",
.bustype = CHIP_BUSTYPE_SPI,
.manufacture_id = GENERIC_MANUF_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rems,
.erase = NULL,
.write = NULL,
},
{ NULL }
};