| ------------------------------------------------------------------------------- |
| flashrom README |
| ------------------------------------------------------------------------------- |
| |
| flashrom is a utility for reading, writing, verifying and erasing flash ROM |
| chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system |
| using a supported mainboard, but it also supports flashing of network |
| cards (NICs), SATA controller cards, and other external devices which can |
| program flash chips. |
| |
| It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32, and |
| TSOP40 chips, which use various protocols such as LPC, FWH, parallel flash, |
| or SPI. |
| |
| (see http://coreboot.org for details on coreboot) |
| |
| |
| Packaging |
| --------- |
| |
| To package flashrom and remove dependencies on subversion, either use |
| make export |
| or |
| make tarball |
| |
| make export will export all flashrom files from the subversion repository at |
| revision BASE into a directory named $EXPORTDIR/flashrom-$VERSION-r$SVNREVISION |
| and will additionally modify the Makefile in that directory to contain the svn |
| revision of the exported tree. |
| |
| make tarball will simply tar up the result of make export and gzip compress it. |
| |
| The snapshot tarballs are the result of make tarball and require no further |
| processing. |
| |
| |
| Build Instructions |
| ------------------ |
| |
| To build flashrom you need to install the following packages or ports: |
| |
| Linux et al: |
| |
| * pciutils |
| * pciutils-devel / pciutils-dev / libpci-dev |
| * zlib-devel / zlib1g-dev |
| |
| On FreeBSD, you need the following ports: |
| |
| * devel/gmake |
| * devel/libpci |
| |
| To compile on Linux, use: |
| |
| make |
| |
| To compile on FreeBSD, use: |
| |
| gmake |
| |
| To compile on Solaris, use: |
| |
| gmake LDFLAGS="-L$pathtolibpci -lpci -lz" CC="gcc -I$pathtopciheaders" \ |
| CFLAGS=-O2 |
| |
| To compile on DragonFly BSD, use: |
| |
| ln -s /usr/pkg/include/pciutils pci |
| gmake CFLAGS=-I. LDFLAGS="-L/usr/pkg/lib -lpci -lz" |
| |
| To compile and run on Darwin/Mac OS X: |
| |
| Install DirectIO from coresystems GmbH. |
| DirectIO is available at http://www.coresystems.de/en/directio. |
| |
| |
| Installation |
| ------------ |
| |
| In order to install flashrom and the manpage into /usr/local, type: |
| |
| sudo make install |
| |
| For installation in a different directory use DESTDIR, e.g. like this: |
| |
| sudo make DESTDIR=/usr install |
| |
| |
| Usage / Options |
| --------------- |
| |
| Please see the flashrom(8) manpage. |
| |
| |
| Exit status |
| ----------- |
| |
| Please see the flashrom(8) manpage. |
| |
| |
| coreboot Table and Mainboard Identification |
| -------------------------------------------- |
| |
| Please see the flashrom(8) manpage. |
| |
| |
| ROM Layout Support |
| ------------------ |
| |
| Please see the flashrom(8) manpage. |
| |
| |
| Supported Flash Chips / Chipsets / Mainboards |
| --------------------------------------------- |
| |
| Please check the output of 'flashrom -L' for the list of supported |
| flash chips, chipsets/southbridges, mainboards, and flash programmers. |
| |
| |
| Website |
| ------- |
| |
| The official flashrom website is: |
| |
| http://coreboot.org/Flashrom |
| |