blob: 38a5ce295dc4fed12af774979c2f0f903172ce97 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2000 Silicon Integrated System Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Datasheet:
* - Name: Intel 82802AB/82802AC Firmware Hub (FWH)
* - URL: http://www.intel.com/design/chipsets/datashts/290658.htm
* - PDF: http://download.intel.com/design/chipsets/datashts/29065804.pdf
* - Order number: 290658-004
*/
#include <stdio.h>
#include <stdint.h>
#include "flash.h"
// I need that Berkeley bit-map printer
void print_82802ab_status(uint8_t status)
{
printf("%s", status & 0x80 ? "Ready:" : "Busy:");
printf("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:");
printf("%s", status & 0x20 ? "BE ERROR:" : "BE OK:");
printf("%s", status & 0x10 ? "PROG ERR:" : "PROG OK:");
printf("%s", status & 0x8 ? "VP ERR:" : "VPP OK:");
printf("%s", status & 0x4 ? "PROG SUSPEND:" : "PROG RUN/FINISH:");
printf("%s", status & 0x2 ? "WP|TBL#|WP#,ABORT:" : "UNLOCK:");
}
int probe_82802ab(struct flashchip *flash)
{
volatile uint8_t *bios = flash->virtual_memory;
uint8_t id1, id2;
#if 0
*(volatile uint8_t *)(bios + 0x5555) = 0xAA;
*(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
*(volatile uint8_t *)(bios + 0x5555) = 0x90;
#endif
*bios = 0xff;
myusec_delay(10);
*bios = 0x90;
myusec_delay(10);
id1 = *(volatile uint8_t *)bios;
id2 = *(volatile uint8_t *)(bios + 0x01);
/* Leave ID mode */
*(volatile uint8_t *)(bios + 0x5555) = 0xAA;
*(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
*(volatile uint8_t *)(bios + 0x5555) = 0xF0;
myusec_delay(10);
printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2);
if (id1 != flash->manufacture_id || id2 != flash->model_id)
return 0;
map_flash_registers(flash);
return 1;
}
uint8_t wait_82802ab(volatile uint8_t *bios)
{
uint8_t status;
uint8_t id1, id2;
*bios = 0x70;
if ((*bios & 0x80) == 0) { // it's busy
while ((*bios & 0x80) == 0) ;
}
status = *bios;
// put another command to get out of status register mode
*bios = 0x90;
myusec_delay(10);
id1 = *(volatile uint8_t *)bios;
id2 = *(volatile uint8_t *)(bios + 0x01);
// this is needed to jam it out of "read id" mode
*(volatile uint8_t *)(bios + 0x5555) = 0xAA;
*(volatile uint8_t *)(bios + 0x2AAA) = 0x55;
*(volatile uint8_t *)(bios + 0x5555) = 0xF0;
return status;
}
int erase_82802ab_block(struct flashchip *flash, int offset)
{
volatile uint8_t *bios = flash->virtual_memory + offset;
volatile uint8_t *wrprotect = flash->virtual_registers + offset + 2;
uint8_t status;
// clear status register
*bios = 0x50;
//printf("Erase at %p\n", bios);
// clear write protect
//printf("write protect is at %p\n", (wrprotect));
//printf("write protect is 0x%x\n", *(wrprotect));
*(wrprotect) = 0;
//printf("write protect is 0x%x\n", *(wrprotect));
// now start it
*(volatile uint8_t *)(bios) = 0x20;
*(volatile uint8_t *)(bios) = 0xd0;
myusec_delay(10);
// now let's see what the register is
status = wait_82802ab(flash->virtual_memory);
//print_82802ab_status(status);
printf("DONE BLOCK 0x%x\n", offset);
return 0;
}
int erase_82802ab(struct flashchip *flash)
{
int i;
unsigned int total_size = flash->total_size * 1024;
printf("total_size is %d; flash->page_size is %d\n",
total_size, flash->page_size);
for (i = 0; i < total_size; i += flash->page_size)
erase_82802ab_block(flash, i);
printf("DONE ERASE\n");
return 0;
}
void write_page_82802ab(volatile uint8_t *bios, uint8_t *src,
volatile uint8_t *dst, int page_size)
{
int i;
for (i = 0; i < page_size; i++) {
/* transfer data from source to destination */
*dst = 0x40;
*dst++ = *src++;
wait_82802ab(bios);
}
}
int write_82802ab(struct flashchip *flash, uint8_t *buf)
{
int i;
int total_size = flash->total_size * 1024;
int page_size = flash->page_size;
volatile uint8_t *bios = flash->virtual_memory;
erase_82802ab(flash);
if (*bios != 0xff) {
printf("ERASE FAILED\n");
return -1;
}
printf("Programming page: ");
for (i = 0; i < total_size / page_size; i++) {
printf("%04d at address: 0x%08x", i, i * page_size);
write_page_82802ab(bios, buf + i * page_size,
bios + i * page_size, page_size);
printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b");
}
printf("\n");
protect_jedec(bios);
return 0;
}