blob: c0c1ffa102324a5f77e5c799a402ceff785846c0 [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2010,2011 Carl-Daniel Hailfinger
* Written by Carl-Daniel Hailfinger for Angelbird Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Datasheets are not public (yet?) */
#if defined(__i386__) || defined(__x86_64__)
#include <stdlib.h>
#include "flash.h"
#include "programmer.h"
#include "hwaccess.h"
uint8_t *mv_bar;
uint16_t mv_iobar;
const struct dev_entry satas_mv[] = {
/* 88SX6041 and 88SX6042 are the same according to the datasheet. */
{0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"},
{0},
};
#define NVRAM_PARAM 0x1045c
#define FLASH_PARAM 0x1046c
#define EXPANSION_ROM_BAR_CONTROL 0x00d2c
#define PCI_BAR2_CONTROL 0x00c08
#define GPIO_PORT_CONTROL 0x104f0
static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val,
chipaddr addr);
static uint8_t satamv_chip_readb(const struct flashctx *flash,
const chipaddr addr);
static const struct par_programmer par_programmer_satamv = {
.chip_readb = satamv_chip_readb,
.chip_readw = fallback_chip_readw,
.chip_readl = fallback_chip_readl,
.chip_readn = fallback_chip_readn,
.chip_writeb = satamv_chip_writeb,
.chip_writew = fallback_chip_writew,
.chip_writel = fallback_chip_writel,
.chip_writen = fallback_chip_writen,
};
static int satamv_shutdown(void *data)
{
physunmap(mv_bar, 0x20000);
pci_cleanup(pacc);
return 0;
}
/*
* Random notes:
* FCE# Flash Chip Enable
* FWE# Flash Write Enable
* FOE# Flash Output Enable
* FALE[1:0] Flash Address Latch Enable
* FAD[7:0] Flash Multiplexed Address/Data Bus
* FA[2:0] Flash Address Low
*
* GPIO[15,2] GPIO Port Mode
* GPIO[4:3] Flash Size
*
* 0xd2c Expansion ROM BAR Control
* 0xc08 PCI BAR2 (Flash/NVRAM) Control
* 0x1046c Flash Parameters
*/
int satamv_init(void)
{
uintptr_t addr;
uint32_t tmp;
if (rget_io_perms())
return 1;
/* BAR0 has all internal registers memory mapped. */
/* No need to check for errors, pcidev_init() will not return in case
* of errors.
*/
addr = pcidev_init(PCI_BASE_ADDRESS_0, satas_mv);
mv_bar = physmap("Marvell 88SX7042 registers", addr, 0x20000);
if (mv_bar == ERROR_PTR)
goto error_out;
if (register_shutdown(satamv_shutdown, NULL))
return 1;
tmp = pci_mmio_readl(mv_bar + FLASH_PARAM);
msg_pspew("Flash Parameters:\n");
msg_pspew("TurnOff=0x%01x\n", (tmp >> 0) & 0x7);
msg_pspew("Acc2First=0x%01x\n", (tmp >> 3) & 0xf);
msg_pspew("Acc2Next=0x%01x\n", (tmp >> 7) & 0xf);
msg_pspew("ALE2Wr=0x%01x\n", (tmp >> 11) & 0x7);
msg_pspew("WrLow=0x%01x\n", (tmp >> 14) & 0x7);
msg_pspew("WrHigh=0x%01x\n", (tmp >> 17) & 0x7);
msg_pspew("Reserved[21:20]=0x%01x\n", (tmp >> 20) & 0x3);
msg_pspew("TurnOffExt=0x%01x\n", (tmp >> 22) & 0x1);
msg_pspew("Acc2FirstExt=0x%01x\n", (tmp >> 23) & 0x1);
msg_pspew("Acc2NextExt=0x%01x\n", (tmp >> 24) & 0x1);
msg_pspew("ALE2WrExt=0x%01x\n", (tmp >> 25) & 0x1);
msg_pspew("WrLowExt=0x%01x\n", (tmp >> 26) & 0x1);
msg_pspew("WrHighExt=0x%01x\n", (tmp >> 27) & 0x1);
msg_pspew("Reserved[31:28]=0x%01x\n", (tmp >> 28) & 0xf);
tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_BAR_CONTROL);
msg_pspew("Expansion ROM BAR Control:\n");
msg_pspew("ExpROMSz=0x%01x\n", (tmp >> 19) & 0x7);
/* Enable BAR2 mapping to flash */
tmp = pci_mmio_readl(mv_bar + PCI_BAR2_CONTROL);
msg_pspew("PCI BAR2 (Flash/NVRAM) Control:\n");
msg_pspew("Bar2En=0x%01x\n", (tmp >> 0) & 0x1);
msg_pspew("BAR2TransAttr=0x%01x\n", (tmp >> 1) & 0x1f);
msg_pspew("BAR2Sz=0x%01x\n", (tmp >> 19) & 0x7);
tmp &= 0xffffffc0;
tmp |= 0x0000001f;
pci_rmmio_writel(tmp, mv_bar + PCI_BAR2_CONTROL);
/* Enable flash: GPIO Port Control Register 0x104f0 */
tmp = pci_mmio_readl(mv_bar + GPIO_PORT_CONTROL);
msg_pspew("GPIOPortMode=0x%01x\n", (tmp >> 0) & 0x3);
if (((tmp >> 0) & 0x3) != 0x2)
msg_pinfo("Warning! Either the straps are incorrect or you "
"have no flash or someone overwrote the strap "
"values!\n");
tmp &= 0xfffffffc;
tmp |= 0x2;
pci_rmmio_writel(tmp, mv_bar + GPIO_PORT_CONTROL);
/* Get I/O BAR location. */
tmp = pci_read_long(pcidev_dev, PCI_BASE_ADDRESS_2) &
PCI_BASE_ADDRESS_IO_MASK;
/* Truncate to reachable range.
* FIXME: Check if the I/O BAR is actually reachable.
* This is an arch specific check.
*/
mv_iobar = tmp & 0xffff;
msg_pspew("Activating I/O BAR at 0x%04x\n", mv_iobar);
/* 512 kByte with two 8-bit latches, and
* 4 MByte with additional 3-bit latch. */
max_rom_decode.parallel = 4 * 1024 * 1024;
register_par_programmer(&par_programmer_satamv, BUS_PARALLEL);
return 0;
error_out:
pci_cleanup(pacc);
return 1;
}
/* BAR2 (MEM) can map NVRAM and flash. We set it to flash in the init function.
* If BAR2 is disabled, it still can be accessed indirectly via BAR1 (I/O).
* This code only supports indirect accesses for now.
*/
/* Indirect access to via the I/O BAR1. */
static void satamv_indirect_chip_writeb(uint8_t val, chipaddr addr)
{
/* 0x80000000 selects BAR2 for remapping. */
OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar);
OUTB(val, mv_iobar + 0x80 + (addr & 0x3));
}
/* Indirect access to via the I/O BAR1. */
static uint8_t satamv_indirect_chip_readb(const chipaddr addr)
{
/* 0x80000000 selects BAR2 for remapping. */
OUTL(((uint32_t)addr | 0x80000000) & 0xfffffffc, mv_iobar);
return INB(mv_iobar + 0x80 + (addr & 0x3));
}
/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */
static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val,
chipaddr addr)
{
satamv_indirect_chip_writeb(val, addr);
}
/* FIXME: Prefer direct access to BAR2 if BAR2 is active. */
static uint8_t satamv_chip_readb(const struct flashctx *flash,
const chipaddr addr)
{
return satamv_indirect_chip_readb(addr);
}
#else
#error PCI port I/O access is not supported on this architecture yet.
#endif