| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> |
| * Copyright (C) 2010, 2011 Carl-Daniel Hailfinger |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include "flash.h" |
| #include "programmer.h" |
| #include "hwaccess.h" |
| |
| struct pci_access *pacc; |
| |
| enum pci_bartype { |
| TYPE_MEMBAR, |
| TYPE_IOBAR, |
| TYPE_ROMBAR, |
| TYPE_UNKNOWN |
| }; |
| |
| uintptr_t pcidev_readbar(struct pci_dev *dev, int bar) |
| { |
| uint64_t addr; |
| uint32_t upperaddr; |
| uint8_t headertype; |
| uint16_t supported_cycles; |
| enum pci_bartype bartype = TYPE_UNKNOWN; |
| |
| |
| headertype = pci_read_byte(dev, PCI_HEADER_TYPE) & 0x7f; |
| msg_pspew("PCI header type 0x%02x\n", headertype); |
| |
| /* Don't use dev->base_addr[x] (as value for 'bar'), won't work on older libpci. */ |
| addr = pci_read_long(dev, bar); |
| |
| /* Sanity checks. */ |
| switch (headertype) { |
| case PCI_HEADER_TYPE_NORMAL: |
| switch (bar) { |
| case PCI_BASE_ADDRESS_0: |
| case PCI_BASE_ADDRESS_1: |
| case PCI_BASE_ADDRESS_2: |
| case PCI_BASE_ADDRESS_3: |
| case PCI_BASE_ADDRESS_4: |
| case PCI_BASE_ADDRESS_5: |
| if ((addr & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) |
| bartype = TYPE_IOBAR; |
| else |
| bartype = TYPE_MEMBAR; |
| break; |
| case PCI_ROM_ADDRESS: |
| bartype = TYPE_ROMBAR; |
| break; |
| } |
| break; |
| case PCI_HEADER_TYPE_BRIDGE: |
| switch (bar) { |
| case PCI_BASE_ADDRESS_0: |
| case PCI_BASE_ADDRESS_1: |
| if ((addr & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) |
| bartype = TYPE_IOBAR; |
| else |
| bartype = TYPE_MEMBAR; |
| break; |
| case PCI_ROM_ADDRESS1: |
| bartype = TYPE_ROMBAR; |
| break; |
| } |
| break; |
| case PCI_HEADER_TYPE_CARDBUS: |
| break; |
| default: |
| msg_perr("Unknown PCI header type 0x%02x, BAR type cannot be determined reliably.\n", |
| headertype); |
| break; |
| } |
| |
| supported_cycles = pci_read_word(dev, PCI_COMMAND); |
| |
| msg_pdbg("Requested BAR is of type "); |
| switch (bartype) { |
| case TYPE_MEMBAR: |
| msg_pdbg("MEM"); |
| if (!(supported_cycles & PCI_COMMAND_MEMORY)) { |
| msg_perr("MEM BAR access requested, but device has MEM space accesses disabled.\n"); |
| /* TODO: Abort here? */ |
| } |
| msg_pdbg(", %sbit, %sprefetchable\n", |
| ((addr & 0x6) == 0x0) ? "32" : (((addr & 0x6) == 0x4) ? "64" : "reserved"), |
| (addr & 0x8) ? "" : "not "); |
| if ((addr & 0x6) == 0x4) { |
| /* The spec says that a 64-bit register consumes |
| * two subsequent dword locations. |
| */ |
| upperaddr = pci_read_long(dev, bar + 4); |
| if (upperaddr != 0x00000000) { |
| /* Fun! A real 64-bit resource. */ |
| if (sizeof(uintptr_t) != sizeof(uint64_t)) { |
| msg_perr("BAR unreachable!"); |
| /* TODO: Really abort here? If multiple PCI devices match, |
| * we might never tell the user about the other devices. |
| */ |
| return 0; |
| } |
| addr |= (uint64_t)upperaddr << 32; |
| } |
| } |
| addr &= PCI_BASE_ADDRESS_MEM_MASK; |
| break; |
| case TYPE_IOBAR: |
| msg_pdbg("I/O\n"); |
| #if __FLASHROM_HAVE_OUTB__ |
| if (!(supported_cycles & PCI_COMMAND_IO)) { |
| msg_perr("I/O BAR access requested, but device has I/O space accesses disabled.\n"); |
| /* TODO: Abort here? */ |
| } |
| #else |
| msg_perr("I/O BAR access requested, but flashrom does not support I/O BAR access on this " |
| "platform (yet).\n"); |
| #endif |
| addr &= PCI_BASE_ADDRESS_IO_MASK; |
| break; |
| case TYPE_ROMBAR: |
| msg_pdbg("ROM\n"); |
| /* Not sure if this check is needed. */ |
| if (!(supported_cycles & PCI_COMMAND_MEMORY)) { |
| msg_perr("MEM BAR access requested, but device has MEM space accesses disabled.\n"); |
| /* TODO: Abort here? */ |
| } |
| addr &= PCI_ROM_ADDRESS_MASK; |
| break; |
| case TYPE_UNKNOWN: |
| msg_perr("BAR type unknown, please report a bug at flashrom@flashrom.org\n"); |
| } |
| |
| return (uintptr_t)addr; |
| } |
| |
| static int pcidev_shutdown(void *data) |
| { |
| if (pacc == NULL) { |
| msg_perr("%s: Tried to cleanup an invalid PCI context!\n" |
| "Please report a bug at flashrom@flashrom.org\n", __func__); |
| return 1; |
| } |
| pci_cleanup(pacc); |
| pacc = NULL; |
| return 0; |
| } |
| |
| int pci_init_common(void) |
| { |
| if (pacc != NULL) { |
| msg_perr("%s: Tried to allocate a new PCI context, but there is still an old one!\n" |
| "Please report a bug at flashrom@flashrom.org\n", __func__); |
| return 1; |
| } |
| pacc = pci_alloc(); /* Get the pci_access structure */ |
| pci_init(pacc); /* Initialize the PCI library */ |
| if (register_shutdown(pcidev_shutdown, NULL)) |
| return 1; |
| pci_scan_bus(pacc); /* We want to get the list of devices */ |
| return 0; |
| } |
| |
| /* pcidev_init gets an array of allowed PCI device IDs and returns a pointer to struct pci_dev iff exactly one |
| * match was found. If the "pci=bb:dd.f" programmer parameter was specified, a match is only considered if it |
| * also matches the specified bus:device.function. |
| * For convenience, this function also registers its own undo handlers. |
| */ |
| struct pci_dev *pcidev_init(const struct dev_entry *devs, int bar) |
| { |
| struct pci_dev *dev; |
| struct pci_dev *found_dev = NULL; |
| struct pci_filter filter; |
| char *pcidev_bdf; |
| char *msg = NULL; |
| int found = 0; |
| int i; |
| |
| if (pci_init_common() != 0) |
| return NULL; |
| pci_filter_init(pacc, &filter); |
| |
| /* Filter by bb:dd.f (if supplied by the user). */ |
| pcidev_bdf = extract_programmer_param("pci"); |
| if (pcidev_bdf != NULL) { |
| if ((msg = pci_filter_parse_slot(&filter, pcidev_bdf))) { |
| msg_perr("Error: %s\n", msg); |
| return NULL; |
| } |
| } |
| free(pcidev_bdf); |
| |
| for (dev = pacc->devices; dev; dev = dev->next) { |
| if (pci_filter_match(&filter, dev)) { |
| pci_fill_info(dev, PCI_FILL_IDENT); |
| /* Check against list of supported devices. */ |
| for (i = 0; devs[i].device_name != NULL; i++) |
| if ((dev->vendor_id == devs[i].vendor_id) && |
| (dev->device_id == devs[i].device_id)) |
| break; |
| /* Not supported, try the next one. */ |
| if (devs[i].device_name == NULL) |
| continue; |
| |
| msg_pdbg("Found \"%s %s\" (%04x:%04x, BDF %02x:%02x.%x).\n", devs[i].vendor_name, |
| devs[i].device_name, dev->vendor_id, dev->device_id, dev->bus, dev->dev, |
| dev->func); |
| if (devs[i].status == NT) |
| msg_pinfo("===\nThis PCI device is UNTESTED. Please report the 'flashrom -p " |
| "xxxx' output\n" |
| "to flashrom@flashrom.org if it works for you. Please add the name " |
| "of your\n" |
| "PCI device to the subject. Thank you for your help!\n===\n"); |
| |
| /* FIXME: We should count all matching devices, not |
| * just those with a valid BAR. |
| */ |
| if (pcidev_readbar(dev, bar) != 0) { |
| found_dev = dev; |
| found++; |
| } |
| } |
| } |
| |
| /* Only continue if exactly one supported PCI dev has been found. */ |
| if (found == 0) { |
| msg_perr("Error: No supported PCI device found.\n"); |
| return NULL; |
| } else if (found > 1) { |
| msg_perr("Error: Multiple supported PCI devices found. Use 'flashrom -p xxxx:pci=bb:dd.f'\n" |
| "to explicitly select the card with the given BDF (PCI bus, device, function).\n"); |
| return NULL; |
| } |
| |
| return found_dev; |
| } |
| |
| enum pci_write_type { |
| pci_write_type_byte, |
| pci_write_type_word, |
| pci_write_type_long, |
| }; |
| |
| struct undo_pci_write_data { |
| struct pci_dev *dev; |
| int reg; |
| enum pci_write_type type; |
| union { |
| uint8_t bytedata; |
| uint16_t worddata; |
| uint32_t longdata; |
| }; |
| }; |
| |
| static int undo_pci_write(void *p) |
| { |
| struct undo_pci_write_data *data = p; |
| if (pacc == NULL || data->dev == NULL) { |
| msg_perr("%s: Tried to undo PCI writes without a valid PCI %s!\n" |
| "Please report a bug at flashrom@flashrom.org\n", |
| __func__, data->dev == NULL ? "device" : "context"); |
| return 1; |
| } |
| msg_pdbg("Restoring PCI config space for %02x:%02x:%01x reg 0x%02x\n", |
| data->dev->bus, data->dev->dev, data->dev->func, data->reg); |
| switch (data->type) { |
| case pci_write_type_byte: |
| pci_write_byte(data->dev, data->reg, data->bytedata); |
| break; |
| case pci_write_type_word: |
| pci_write_word(data->dev, data->reg, data->worddata); |
| break; |
| case pci_write_type_long: |
| pci_write_long(data->dev, data->reg, data->longdata); |
| break; |
| } |
| /* p was allocated in register_undo_pci_write. */ |
| free(p); |
| return 0; |
| } |
| |
| #define register_undo_pci_write(a, b, c) \ |
| { \ |
| struct undo_pci_write_data *undo_pci_write_data; \ |
| undo_pci_write_data = malloc(sizeof(*undo_pci_write_data)); \ |
| if (!undo_pci_write_data) { \ |
| msg_gerr("Out of memory!\n"); \ |
| exit(1); \ |
| } \ |
| if (pacc) \ |
| undo_pci_write_data->dev = pci_get_dev(pacc, \ |
| a->domain, a->bus, a->dev, a->func); \ |
| else \ |
| undo_pci_write_data->dev = NULL; \ |
| undo_pci_write_data->reg = b; \ |
| undo_pci_write_data->type = pci_write_type_##c; \ |
| undo_pci_write_data->c##data = pci_read_##c(dev, reg); \ |
| register_shutdown(undo_pci_write, undo_pci_write_data); \ |
| } |
| |
| #define register_undo_pci_write_byte(a, b) register_undo_pci_write(a, b, byte) |
| #define register_undo_pci_write_word(a, b) register_undo_pci_write(a, b, word) |
| #define register_undo_pci_write_long(a, b) register_undo_pci_write(a, b, long) |
| |
| int rpci_write_byte(struct pci_dev *dev, int reg, uint8_t data) |
| { |
| register_undo_pci_write_byte(dev, reg); |
| return pci_write_byte(dev, reg, data); |
| } |
| |
| int rpci_write_word(struct pci_dev *dev, int reg, uint16_t data) |
| { |
| register_undo_pci_write_word(dev, reg); |
| return pci_write_word(dev, reg, data); |
| } |
| |
| int rpci_write_long(struct pci_dev *dev, int reg, uint32_t data) |
| { |
| register_undo_pci_write_long(dev, reg); |
| return pci_write_long(dev, reg, data); |
| } |