Replace PCI_OK/PCI_NT by OK/NT
We don't need to duplicate OK and NT as PCI_OK and PCI_NT if the symbols
are already there (defined for the chipset enable table).
Corresponding to flashrom svn r911.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
diff --git a/nic3com.c b/nic3com.c
index a4878d2..d3dcce5 100644
--- a/nic3com.c
+++ b/nic3com.c
@@ -36,20 +36,20 @@
struct pcidev_status nics_3com[] = {
/* 3C90xB */
- {0x10b7, 0x9055, PCI_OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"},
- {0x10b7, 0x9001, PCI_NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" },
- {0x10b7, 0x9004, PCI_OK, "3COM", "3C90xB: PCI 10BASE-T (TPO)" },
- {0x10b7, 0x9005, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2/AUI (COMBO)" },
- {0x10b7, 0x9006, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" },
- {0x10b7, 0x900a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FL" },
- {0x10b7, 0x905a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FX" },
- {0x10b7, 0x9058, PCI_OK, "3COM", "3C905B: Cyclone 10/100/BNC" },
+ {0x10b7, 0x9055, OK, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-TX"},
+ {0x10b7, 0x9001, NT, "3COM", "3C90xB: PCI 10/100 Mbps; shared 10BASE-T/100BASE-T4" },
+ {0x10b7, 0x9004, OK, "3COM", "3C90xB: PCI 10BASE-T (TPO)" },
+ {0x10b7, 0x9005, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2/AUI (COMBO)" },
+ {0x10b7, 0x9006, NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" },
+ {0x10b7, 0x900a, NT, "3COM", "3C90xB: PCI 10BASE-FL" },
+ {0x10b7, 0x905a, NT, "3COM", "3C90xB: PCI 10BASE-FX" },
+ {0x10b7, 0x9058, OK, "3COM", "3C905B: Cyclone 10/100/BNC" },
/* 3C905C */
- {0x10b7, 0x9200, PCI_OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" },
+ {0x10b7, 0x9200, OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" },
/* 3C980C */
- {0x10b7, 0x9805, PCI_NT, "3COM", "3C980C: EtherLink Server 10/100 PCI (TX)" },
+ {0x10b7, 0x9805, NT, "3COM", "3C980C: EtherLink Server 10/100 PCI (TX)" },
{},
};