| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2010 Uwe Hermann <uwe@hermann-uwe.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <stdlib.h> |
| #include <string.h> |
| #include "flash.h" |
| #include "programmer.h" |
| |
| #define BIOS_ROM_ADDR 0x90 |
| #define BIOS_ROM_DATA 0x94 |
| |
| #define REG_FLASH_ACCESS 0x58 |
| |
| #define PCI_VENDOR_ID_HPT 0x1103 |
| |
| const struct pcidev_status ata_hpt[] = { |
| {0x1103, 0x0004, NT, "Highpoint", "HPT366/368/370/370A/372/372N"}, |
| {0x1103, 0x0005, NT, "Highpoint", "HPT372A/372N"}, |
| {0x1103, 0x0006, NT, "Highpoint", "HPT302/302N"}, |
| |
| {}, |
| }; |
| |
| int atahpt_init(void) |
| { |
| uint32_t reg32; |
| |
| get_io_perms(); |
| |
| io_base_addr = pcidev_init(PCI_BASE_ADDRESS_4, ata_hpt); |
| |
| /* Enable flash access. */ |
| reg32 = pci_read_long(pcidev_dev, REG_FLASH_ACCESS); |
| reg32 |= (1 << 24); |
| rpci_write_long(pcidev_dev, REG_FLASH_ACCESS, reg32); |
| |
| buses_supported = CHIP_BUSTYPE_PARALLEL; |
| |
| return 0; |
| } |
| |
| int atahpt_shutdown(void) |
| { |
| /* Flash access is disabled automatically by PCI restore. */ |
| pci_cleanup(pacc); |
| release_io_perms(); |
| return 0; |
| } |
| |
| void atahpt_chip_writeb(uint8_t val, chipaddr addr) |
| { |
| OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); |
| OUTB(val, io_base_addr + BIOS_ROM_DATA); |
| } |
| |
| uint8_t atahpt_chip_readb(const chipaddr addr) |
| { |
| OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR); |
| return INB(io_base_addr + BIOS_ROM_DATA); |
| } |