blob: 377524e8b460b2d836d33e2c10beb487ddacb34a [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2005-2007 coresystems GmbH <stepan@coresystems.de>
* Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2007-2009 Luc Verhaegen <libv@skynet.be>
* Copyright (C) 2007 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Contains the board specific flash enables.
*/
#include <string.h>
#include <fcntl.h>
#include "flash.h"
/*
* Helper functions for many Winbond Super I/Os of the W836xx range.
*/
/* Enter extended functions */
void w836xx_ext_enter(uint16_t port)
{
OUTB(0x87, port);
OUTB(0x87, port);
}
/* Leave extended functions */
void w836xx_ext_leave(uint16_t port)
{
OUTB(0xAA, port);
}
/* Generic Super I/O helper functions */
uint8_t sio_read(uint16_t port, uint8_t reg)
{
OUTB(reg, port);
return INB(port + 1);
}
void sio_write(uint16_t port, uint8_t reg, uint8_t data)
{
OUTB(reg, port);
OUTB(data, port + 1);
}
void sio_mask(uint16_t port, uint8_t reg, uint8_t data, uint8_t mask)
{
uint8_t tmp;
OUTB(reg, port);
tmp = INB(port + 1) & ~mask;
OUTB(tmp | (data & mask), port + 1);
}
/**
* Winbond W83627HF: Raise GPIO24.
*
* Suited for:
* - Agami Aruma
* - IWILL DK8-HTX
*/
static int w83627hf_gpio24_raise(uint16_t port, const char *name)
{
w836xx_ext_enter(port);
/* Is this the W83627HF? */
if (sio_read(port, 0x20) != 0x52) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n",
name, sio_read(port, 0x20));
w836xx_ext_leave(port);
return -1;
}
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */
sio_mask(port, 0x2B, 0x10, 0x10);
/* Select logical device 8: GPIO port 2 */
sio_write(port, 0x07, 0x08);
sio_mask(port, 0x30, 0x01, 0x01); /* Activate logical device. */
sio_mask(port, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
sio_mask(port, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
sio_mask(port, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
w836xx_ext_leave(port);
return 0;
}
static int w83627hf_gpio24_raise_2e(const char *name)
{
return w83627hf_gpio24_raise(0x2e, name);
}
/**
* Winbond W83627THF: GPIO 4, bit 4
*
* Suited for:
* - MSI K8T Neo2-F
* - MSI K8N-NEO3
*/
static int w83627thf_gpio4_4_raise(uint16_t port, const char *name)
{
w836xx_ext_enter(port);
/* Is this the W83627THF? */
if (sio_read(port, 0x20) != 0x82) { /* Super I/O device ID reg. */
fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n",
name, sio_read(port, 0x20));
w836xx_ext_leave(port);
return -1;
}
/* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */
sio_write(port, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */
sio_mask(port, 0x30, 0x02, 0x02); /* Activate logical device. */
sio_mask(port, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */
sio_mask(port, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */
sio_mask(port, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */
w836xx_ext_leave(port);
return 0;
}
static int w83627thf_gpio4_4_raise_2e(const char *name)
{
return w83627thf_gpio4_4_raise(0x2e, name);
}
static int w83627thf_gpio4_4_raise_4e(const char *name)
{
return w83627thf_gpio4_4_raise(0x4e, name);
}
/**
* w83627: Enable MEMW# and set ROM size to max.
*/
static void w836xx_memw_enable(uint16_t port)
{
w836xx_ext_enter(port);
if (!(sio_read(port, 0x24) & 0x02)) { /* Flash ROM enabled? */
/* Enable MEMW# and set ROM size select to max. (4M). */
sio_mask(port, 0x24, 0x28, 0x28);
}
w836xx_ext_leave(port);
}
/**
* Common routine for several VT823x based boards.
*/
static void vt823x_set_all_writes_to_lpc(struct pci_dev *dev)
{
uint8_t val;
/* All memory cycles, not just ROM ones, go to LPC. */
val = pci_read_byte(dev, 0x59);
val &= ~0x80;
pci_write_byte(dev, 0x59, val);
}
/**
* VT823x: Set one of the GPIO pins.
*/
static void vt823x_gpio_set(struct pci_dev *dev, uint8_t gpio, int raise)
{
uint16_t base;
uint8_t val, bit;
if ((gpio < 12) || (gpio > 15)) {
fprintf(stderr, "\nERROR: "
"VT823x GPIO%02d is not implemented.\n", gpio);
return;
}
/* GPIO12-15 -> output */
val = pci_read_byte(dev, 0xE4);
val |= 0x10;
pci_write_byte(dev, 0xE4, val);
/* Now raise/drop the GPIO line itself. */
bit = 0x01 << (gpio - 8);
/* We need the I/O Base Address for this board's flash enable. */
base = pci_read_word(dev, 0x88) & 0xff80;
val = INB(base + 0x4D);
if (raise)
val |= bit;
else
val &= ~bit;
OUTB(val, base + 0x4D);
}
/**
* Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs.
*
* We don't need to do this when using coreboot, GPIO15 is never lowered there.
*/
static int board_via_epia_m(const char *name)
{
struct pci_dev *dev;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n");
return -1;
}
/* GPIO15 is connected to write protect. */
vt823x_gpio_set(dev, 15, 1);
return 0;
}
/**
* Suited for:
* - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235
* - Tyan S2498 (Tomcat K7M): AMD Geode NX + VIA KM400 + VT8237.
*/
static int board_asus_a7v8x_mx(const char *name)
{
struct pci_dev *dev;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev)
dev = pci_dev_find(0x1106, 0x3227); /* VT8237 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n");
return -1;
}
vt823x_set_all_writes_to_lpc(dev);
w836xx_memw_enable(0x2E);
return 0;
}
/**
* Suited for VIAs EPIA SP and EPIA CN.
*/
static int board_via_epia_sp(const char *name)
{
struct pci_dev *dev;
dev = pci_dev_find(0x1106, 0x3227); /* VT8237R ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT8237R ISA bridge not found.\n");
return -1;
}
vt823x_set_all_writes_to_lpc(dev);
return 0;
}
/**
* Suited for EPoX EP-8K5A2 and Albatron PM266A.
*/
static int board_epox_ep_8k5a2(const char *name)
{
struct pci_dev *dev;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n");
return -1;
}
w836xx_memw_enable(0x2E);
return 0;
}
/**
* Suited for ASUS P5A.
*
* This is rather nasty code, but there's no way to do this cleanly.
* We're basically talking to some unknown device on SMBus, my guess
* is that it is the Winbond W83781D that lives near the DIP BIOS.
*/
static int board_asus_p5a(const char *name)
{
uint8_t tmp;
int i;
#define ASUSP5A_LOOP 5000
OUTB(0x00, 0xE807);
OUTB(0xEF, 0xE803);
OUTB(0xFF, 0xE800);
for (i = 0; i < ASUSP5A_LOOP; i++) {
OUTB(0xE1, 0xFF);
if (INB(0xE800) & 0x04)
break;
}
if (i == ASUSP5A_LOOP) {
printf("%s: Unable to contact device.\n", name);
return -1;
}
OUTB(0x20, 0xE801);
OUTB(0x20, 0xE1);
OUTB(0xFF, 0xE802);
for (i = 0; i < ASUSP5A_LOOP; i++) {
tmp = INB(0xE800);
if (tmp & 0x70)
break;
}
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) {
printf("%s: failed to read device.\n", name);
return -1;
}
tmp = INB(0xE804);
tmp &= ~0x02;
OUTB(0x00, 0xE807);
OUTB(0xEE, 0xE803);
OUTB(tmp, 0xE804);
OUTB(0xFF, 0xE800);
OUTB(0xE1, 0xFF);
OUTB(0x20, 0xE801);
OUTB(0x20, 0xE1);
OUTB(0xFF, 0xE802);
for (i = 0; i < ASUSP5A_LOOP; i++) {
tmp = INB(0xE800);
if (tmp & 0x70)
break;
}
if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) {
printf("%s: failed to write to device.\n", name);
return -1;
}
return 0;
}
static int board_ibm_x3455(const char *name)
{
/* Set GPIO lines in the Broadcom HT-1000 southbridge. */
/* It's not a superio but it uses the same index/data port method. */
sio_mask(0xcd6, 0x45, 0x20, 0x20);
return 0;
}
/**
* Suited for the Gigabyte GA-K8N-SLI: CK804 southbridge.
*/
static int board_ga_k8n_sli(const char *name)
{
struct pci_dev *dev;
uint32_t base;
uint8_t tmp;
dev = pci_dev_find(0x10DE, 0x0050); /* NVIDIA CK804 LPC */
if (!dev) {
fprintf(stderr, "\nERROR: NVIDIA LPC bridge not found.\n");
return -1;
}
base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */
/* if anyone knows more about nvidia lpcs, feel free to explain this */
tmp = INB(base + 0xE1);
tmp |= 0x05;
OUTB(tmp, base + 0xE1);
return 0;
}
static int board_hp_dl145_g3_enable(const char *name)
{
/* Set GPIO lines in the Broadcom HT-1000 southbridge. */
/* GPIO 0 reg from PM regs */
/* Set GPIO 2 and 5 high, connected to flash WP# and TBL# pins. */
/* It's not a superio but it uses the same index/data port method. */
sio_mask(0xcd6, 0x44, 0x24, 0x24);
return 0;
}
/**
* Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards.
*/
static int board_epox_ep_bx3(const char *name)
{
uint8_t tmp;
/* Raise GPIO22. */
tmp = INB(0x4036);
OUTB(tmp, 0xEB);
tmp |= 0x40;
OUTB(tmp, 0x4036);
OUTB(tmp, 0xEB);
return 0;
}
/**
* Suited for Acorp 6A815EPD.
*/
static int board_acorp_6a815epd(const char *name)
{
struct pci_dev *dev;
uint16_t port;
uint8_t val;
dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */
if (!dev) {
fprintf(stderr, "\nERROR: ICH2 LPC bridge not found.\n");
return -1;
}
/* Use GPIOBASE register to find where the GPIO is mapped. */
port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE;
val = INB(port);
val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */
val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */
OUTB(val, port);
return 0;
}
/**
* Suited for Artec Group DBE61 and DBE62.
*/
static int board_artecgroup_dbe6x(const char *name)
{
#define DBE6x_MSR_DIVIL_BALL_OPTS 0x51400015
#define DBE6x_PRI_BOOT_LOC_SHIFT (2)
#define DBE6x_BOOT_OP_LATCHED_SHIFT (8)
#define DBE6x_SEC_BOOT_LOC_SHIFT (10)
#define DBE6x_PRI_BOOT_LOC (3 << DBE6x_PRI_BOOT_LOC_SHIFT)
#define DBE6x_BOOT_OP_LATCHED (3 << DBE6x_BOOT_OP_LATCHED_SHIFT)
#define DBE6x_SEC_BOOT_LOC (3 << DBE6x_SEC_BOOT_LOC_SHIFT)
#define DBE6x_BOOT_LOC_FLASH (2)
#define DBE6x_BOOT_LOC_FWHUB (3)
unsigned long msr[2];
int msr_fd;
unsigned long boot_loc;
msr_fd = open("/dev/cpu/0/msr", O_RDWR);
if (msr_fd == -1) {
perror("open /dev/cpu/0/msr");
return -1;
}
if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) {
perror("lseek");
close(msr_fd);
return -1;
}
if (read(msr_fd, (void *)msr, 8) != 8) {
perror("read");
close(msr_fd);
return -1;
}
if ((msr[0] & (DBE6x_BOOT_OP_LATCHED)) ==
(DBE6x_BOOT_LOC_FWHUB << DBE6x_BOOT_OP_LATCHED_SHIFT))
boot_loc = DBE6x_BOOT_LOC_FWHUB;
else
boot_loc = DBE6x_BOOT_LOC_FLASH;
msr[0] &= ~(DBE6x_PRI_BOOT_LOC | DBE6x_SEC_BOOT_LOC);
msr[0] |= ((boot_loc << DBE6x_PRI_BOOT_LOC_SHIFT) |
(boot_loc << DBE6x_SEC_BOOT_LOC_SHIFT));
if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) {
perror("lseek");
close(msr_fd);
return -1;
}
if (write(msr_fd, (void *)msr, 8) != 8) {
perror("write");
close(msr_fd);
return -1;
}
close(msr_fd);
return 0;
}
/**
* Set the specified GPIO on the specified ICHx southbridge to high.
*
* @param name The name of this board.
* @param ich_vendor PCI vendor ID of the specified ICHx southbridge.
* @param ich_device PCI device ID of the specified ICHx southbridge.
* @param gpiobase_reg GPIOBASE register offset in the LPC bridge.
* @param gp_lvl Offset of GP_LVL register in I/O space, relative to GPIOBASE.
* @param gp_lvl_bitmask GP_LVL bitmask (set GPIO bits to 1, all others to 0).
* @param gpio_bit The bit (GPIO) which shall be set to high.
* @return If the write-enable was successful return 0, otherwise return -1.
*/
static int ich_gpio_raise(const char *name, uint16_t ich_vendor,
uint16_t ich_device, uint8_t gpiobase_reg,
uint8_t gp_lvl, uint32_t gp_lvl_bitmask,
unsigned int gpio_bit)
{
struct pci_dev *dev;
uint16_t gpiobar;
uint32_t reg32;
dev = pci_dev_find(ich_vendor, ich_device); /* Intel ICHx LPC */
if (!dev) {
fprintf(stderr, "\nERROR: ICHx LPC dev %4x:%4x not found.\n",
ich_vendor, ich_device);
return -1;
}
/* Use GPIOBASE register to find the I/O space for GPIO. */
gpiobar = pci_read_word(dev, gpiobase_reg) & gp_lvl_bitmask;
/* Set specified GPIO to high. */
reg32 = INL(gpiobar + gp_lvl);
reg32 |= (1 << gpio_bit);
OUTL(reg32, gpiobar + gp_lvl);
return 0;
}
/**
* Suited for ASUS P4B266.
*/
static int ich2_gpio22_raise(const char *name)
{
return ich_gpio_raise(name, 0x8086, 0x2440, 0x58, 0x0c, 0xffc0, 22);
}
/**
* Suited for MSI MS-7046.
*/
static int ich6_gpio19_raise(const char *name)
{
return ich_gpio_raise(name, 0x8086, 0x2640, 0x48, 0x0c, 0xffc0, 19);
}
static int board_kontron_986lcd_m(const char *name)
{
struct pci_dev *dev;
uint16_t gpiobar;
uint32_t val;
#define ICH7_GPIO_LVL2 0x38
dev = pci_dev_find(0x8086, 0x27b8); /* Intel ICH7 LPC */
if (!dev) {
// This will never happen on this board
fprintf(stderr, "\nERROR: ICH7 LPC bridge not found.\n");
return -1;
}
/* Use GPIOBASE register to find where the GPIO is mapped. */
gpiobar = pci_read_word(dev, 0x48) & 0xfffc;
val = INL(gpiobar + ICH7_GPIO_LVL2); /* GP_LVL2 */
printf_debug("\nGPIOBAR=0x%04x GP_LVL: 0x%08x\n", gpiobar, val);
/* bit 2 (0x04) = 0 #TBL --> bootblock locking = 1
* bit 2 (0x04) = 1 #TBL --> bootblock locking = 0
* bit 3 (0x08) = 0 #WP --> block locking = 1
* bit 3 (0x08) = 1 #WP --> block locking = 0
*
* To enable full block locking, you would do:
* val &= ~ ((1 << 2) | (1 << 3));
*/
val |= (1 << 2) | (1 << 3);
OUTL(val, gpiobar + ICH7_GPIO_LVL2);
return 0;
}
/**
* Suited for:
* - BioStar P4M80-M4: Intel P4 + VIA P4M800 + VT8237
* - GIGABYTE GA-7VT600: AMD K7 + VIA KT600 + VT8237
*/
static int board_biostar_p4m80_m4(const char *name)
{
/* enter IT87xx conf mode */
enter_conf_mode_ite(0x2e);
/* select right flash chip */
sio_mask(0x2e, 0x22, 0x80, 0x80);
/* bit 3: flash chip write enable
* bit 7: map flash chip at 1MB-128K (why though? ignoring this.)
*/
sio_mask(0x2e, 0x24, 0x04, 0x04);
/* exit IT87xx conf mode */
exit_conf_mode_ite(0x2e);
return 0;
}
/**
* Winbond W83697HF Super I/O + VIA VT8235 southbridge
*
* Suited for:
* - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235
* - MSI KT4 Ultra: AMD K7 + VIA KT400 + VT8235
* - MSI KT3 Ultra2: AMD K7 + VIA KT333 + VT8235
*/
static int board_msi_kt4v(const char *name)
{
struct pci_dev *dev;
uint8_t val;
dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */
if (!dev) {
fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n");
return -1;
}
val = pci_read_byte(dev, 0x59);
val &= 0x0c;
pci_write_byte(dev, 0x59, val);
vt823x_gpio_set(dev, 12, 1);
w836xx_memw_enable(0x2E);
return 0;
}
/**
* We use 2 sets of IDs here, you're free to choose which is which. This
* is to provide a very high degree of certainty when matching a board on
* the basis of subsystem/card IDs. As not every vendor handles
* subsystem/card IDs in a sane manner.
*
* Keep the second set NULLed if it should be ignored. Keep the subsystem IDs
* NULLed if they don't identify the board fully. But please take care to
* provide an as complete set of pci ids as possible; autodetection is the
* preferred behaviour and we would like to make sure that matches are unique.
*
* The coreboot ids are used two fold. When running with a coreboot firmware,
* the ids uniquely matches the coreboot board identification string. When a
* legacy bios is installed and when autodetection is not possible, these ids
* can be used to identify the board through the -m command line argument.
*
* When a board is identified through its coreboot ids (in both cases), the
* main pci ids are still required to match, as a safeguard.
*/
/* Please keep this list alphabetically ordered by vendor/board name. */
struct board_pciid_enable board_pciid_enables[] = {
/* first pci-id set [4], second pci-id set [4], coreboot id [2], vendor name board name flash enable */
{0x8086, 0x1130, 0, 0, 0x105a, 0x0d30, 0x105a, 0x4d33, "acorp", "6a815epd", "Acorp", "6A815EPD", board_acorp_6a815epd},
{0x1022, 0x746B, 0x1022, 0x36C0, 0, 0, 0, 0, "AGAMI", "ARUMA", "agami", "Aruma", w83627hf_gpio24_raise_2e},
{0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, "Albatron", "PM266A", board_epox_ep_8k5a2},
{0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe61", "Artec Group", "DBE61", board_artecgroup_dbe6x},
{0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, "artecgroup", "dbe62", "Artec Group", "DBE62", board_artecgroup_dbe6x},
{0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS", "A7V8-MX SE", board_asus_a7v8x_mx},
{0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", ich2_gpio22_raise},
{0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "asus", "p5a", "ASUS", "P5A", board_asus_p5a},
{0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202, NULL, NULL, "BioStar", "P4M80-M4", board_biostar_p4m80_m4},
{0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, "EPoX", "EP-8K5A2", board_epox_ep_8k5a2},
{0x8086, 0x7110, 0, 0, 0x8086, 0x7190, 0, 0, "epox", "ep-bx3", "EPoX", "EP-BX3", board_epox_ep_bx3},
{0x1039, 0x0761, 0, 0, 0, 0, 0, 0, "gigabyte", "2761gxdk", "GIGABYTE", "GA-2761GXDK", it87xx_probe_spi_flash},
{0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, "GIGABYTE", "GA-7VT600", board_biostar_p4m80_m4},
{0x10DE, 0x0050, 0x1458, 0x0C11, 0x10DE, 0x005e, 0x1458, 0x5000, NULL, NULL, "GIGABYTE", "GA-K8N-SLI", board_ga_k8n_sli},
{0x10de, 0x0360, 0, 0, 0, 0, 0, 0, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash},
{0x10de, 0x03e0, 0, 0, 0, 0, 0, 0, "gigabyte", "m61p", "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash},
{0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb000, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", it87xx_probe_spi_flash},
{0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb002, NULL, NULL, "GIGABYTE", "GA-MA78GM-S2H", it87xx_probe_spi_flash},
/* SB600 LPC, RD790 North. Neither are specific to the GA-MA790FX-DQ6. The coreboot ID is here to be able to trigger the board enable more easily. */
{0x1002, 0x438d, 0x1458, 0x5001, 0x1002, 0x5956, 0x1002, 0x5956, "gigabyte", "ma790fx-dq6", "GIGABYTE", "GA-MA790FX-DQ6", it87xx_probe_spi_flash},
{0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, "hp", "dl145_g3", "HP", "DL145 G3", board_hp_dl145_g3_enable},
{0x1166, 0x0205, 0x1014, 0x0347, 0, 0, 0, 0, "ibm", "x3455", "IBM", "x3455", board_ibm_x3455},
{0x1039, 0x5513, 0x8086, 0xd61f, 0x1039, 0x6330, 0x8086, 0xd61f, NULL, NULL, "Intel", "D201GLY", wbsio_check_for_spi},
{0x1022, 0x7468, 0, 0, 0, 0, 0, 0, "iwill", "dk8_htx", "IWILL", "DK8-HTX", w83627hf_gpio24_raise_2e},
/* Note: There are >= 2 version of the Kontron 986LCD-M/mITX! */
{0x8086, 0x27b8, 0, 0, 0, 0, 0, 0, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m},
{0x10ec, 0x8168, 0x10ec, 0x8168, 0x104c, 0x8023, 0x104c, 0x8019, "kontron", "986lcd-m", "Kontron", "986LCD-M", board_kontron_986lcd_m},
{0x10de, 0x005e, 0, 0, 0, 0, 0, 0, "msi", "k8n-neo3", "MSI", "MS-7135 (K8N Neo3)", w83627thf_gpio4_4_raise_4e},
{0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, "MSI", "MS-6702E (K8T Neo2-F)",w83627thf_gpio4_4_raise_2e},
{0x1106, 0x0571, 0x1462, 0x7120, 0, 0, 0, 0, "msi", "kt4v", "MSI", "MS-6712 (KT4V)", board_msi_kt4v},
{0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, "msi", "kt4ultra", "MSI", "MS-6590 (KT4 Ultra)",board_msi_kt4v},
{0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, "MSI", "MS-7046", ich6_gpio19_raise},
{0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", board_asus_a7v8x_mx},
{0x1106, 0x0314, 0x1106, 0xaa08, 0x1106, 0x3227, 0x1106, 0xAA08, NULL, NULL, "VIA", "EPIA-CN", board_via_epia_sp},
{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA M/MII/...", board_via_epia_m},
{0x1106, 0x3227, 0x1106, 0xAA01, 0x1106, 0x0259, 0x1106, 0xAA01, NULL, NULL, "VIA", "EPIA SP", board_via_epia_sp},
{0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, "via", "pc3500g", "VIA", "PC3500G", it87xx_probe_spi_flash},
{ 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL}, /* end marker */
};
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_ok[] = {
/* Verified working boards that don't need write-enables. */
{ "Abit", "AX8", },
{ "Advantech", "PCM-5820", },
{ "ASI", "MB-5BLMP", },
{ "ASUS", "A7N8X Deluxe", },
{ "ASUS", "A7N8X-E Deluxe", },
{ "ASUS", "A7V400-MX", },
{ "ASUS", "A7V8X-MX", },
{ "ASUS", "A8N-E", },
{ "ASUS", "A8NE-FM/S", },
{ "ASUS", "A8N-SLI", },
{ "ASUS", "A8N-SLI Premium", },
{ "ASUS", "A8V-E Deluxe", },
{ "ASUS", "A8V-E SE", },
{ "ASUS", "M2A-MX", },
{ "ASUS", "M2A-VM", },
{ "ASUS", "M2N-E", },
{ "ASUS", "M2V", },
{ "ASUS", "P2B", },
{ "ASUS", "P2B-D", },
{ "ASUS", "P2B-DS", },
{ "ASUS", "P2B-F", },
{ "ASUS", "P2L97-S", },
{ "ASUS", "P5B-Deluxe", },
{ "ASUS", "P6T Deluxe V2", },
{ "A-Trend", "ATC-6220", },
{ "BCOM", "WinNET100", },
{ "GIGABYTE", "GA-6BXC", },
{ "GIGABYTE", "GA-6BXDU", },
{ "GIGABYTE", "GA-6ZMA", },
{ "Intel", "EP80759", },
{ "Jetway", "J7F4K1G5D-PB", },
{ "MSI", "MS-6570 (K7N2)", },
{ "MSI", "MS-7065", },
{ "MSI", "MS-7168 (Orion)", },
{ "MSI", "MS-7236 (945PL Neo3)", },
{ "MSI", "MS-7255 (P4M890M)", },
{ "MSI", "MS-7345 (P35 Neo2-FIR)", },
{ "NEC", "PowerMate 2000", },
{ "PC Engines", "Alix.1c", },
{ "PC Engines", "Alix.2c2", },
{ "PC Engines", "Alix.2c3", },
{ "PC Engines", "Alix.3c3", },
{ "PC Engines", "Alix.3d3", },
{ "RCA", "RM4100", },
{ "Sun", "Blade x6250", },
{ "Supermicro", "H8QC8", },
{ "Thomson", "IP1000", },
{ "T-Online", "S-100", },
{ "Tyan", "iS5375-1U", },
{ "Tyan", "S1846", },
{ "Tyan", "S2881", },
{ "Tyan", "S2882", },
{ "Tyan", "S2882-D", },
{ "Tyan", "S2891", },
{ "Tyan", "S2892", },
{ "Tyan", "S2895", },
{ "Tyan", "S3095", },
{ "Tyan", "S5180", },
{ "Tyan", "S5191", },
{ "Tyan", "S5197", },
{ "Tyan", "S5211", },
{ "Tyan", "S5211-1U", },
{ "Tyan", "S5220", },
{ "Tyan", "S5375", },
{ "Tyan", "S5376G2NR/S5376WAG2NR", },
{ "Tyan", "S5377", },
{ "Tyan", "S5397", },
{ "VIA", "EPIA-LN", },
{ "VIA", "NAB74X0", },
{ "VIA", "pc2500e", },
{ "VIA", "VB700X", },
{},
};
/* Please keep this list alphabetically ordered by vendor/board. */
const struct board_info boards_bad[] = {
/* Verified non-working boards (for now). */
{ "Abit", "IS-10", },
{ "ASUS", "M3N78 Pro", },
{ "ASUS", "MEW-AM", },
{ "ASUS", "MEW-VM", },
{ "ASUS", "P3B-F", },
{ "ASUS", "P5B", },
{ "ASUS", "P5BV-M", },
{ "Biostar", "M6TBA", },
{ "Boser", "HS-6637", },
{ "DFI", "855GME-MGF", },
{ "FIC", "VA-502", },
{ "MSI", "MS-6178", },
{ "MSI", "MS-7260 (K9N Neo)", },
{ "PCCHIPS", "M537DMA33", },
{ "Soyo", "SY-5VD", },
{ "Sun", "Fire x4150", },
{ "Sun", "Fire x4200", },
{ "Sun", "Fire x4540", },
{ "Sun", "Fire x4600", },
{},
};
void print_supported_boards_helper(const struct board_info *b)
{
int i, j, boardcount = 0;
for (i = 0; b[i].vendor != NULL; i++)
boardcount++;
for (i = 0; b[i].vendor != NULL; i++) {
printf("%s", b[i].vendor);
for (j = 0; j < 25 - strlen(b[i].vendor); j++)
printf(" ");
printf("%s", b[i].name);
for (j = 0; j < 23 - strlen(b[i].name); j++)
printf(" ");
printf("\n");
}
}
void print_supported_boards(void)
{
int i, j, boardcount = 0;
struct board_pciid_enable *b = board_pciid_enables;
for (i = 0; b[i].vendor_name != NULL; i++)
boardcount++;
printf("\nSupported boards which need write-enable code (total: %d):"
"\n\nVendor: Board: "
"Required option:\n\n", boardcount);
for (i = 0; b[i].vendor_name != NULL; i++) {
printf("%s", b[i].vendor_name);
for (j = 0; j < 25 - strlen(b[i].vendor_name); j++)
printf(" ");
printf("%s", b[i].board_name);
for (j = 0; j < 25 - strlen(b[i].board_name); j++)
printf(" ");
if (b[i].lb_vendor != NULL)
printf("-m %s:%s\n", b[i].lb_vendor, b[i].lb_part);
else
printf("(none, board is autodetected)\n");
}
for (i = 0, boardcount = 0; boards_ok[i].vendor != NULL; i++)
boardcount++;
printf("\nSupported boards which don't need write-enable code "
"(total: %d):\n\n", boardcount);
print_supported_boards_helper(boards_ok);
for (i = 0, boardcount = 0; boards_bad[i].vendor != NULL; i++)
boardcount++;
printf("\nBoards which have been verified to NOT work yet "
"(total: %d):\n\n", boardcount);
print_supported_boards_helper(boards_bad);
}
/**
* Match boards on coreboot table gathered vendor and part name.
* Require main PCI IDs to match too as extra safety.
*/
static struct board_pciid_enable *board_match_coreboot_name(const char *vendor,
const char *part)
{
struct board_pciid_enable *board = board_pciid_enables;
struct board_pciid_enable *partmatch = NULL;
for (; board->vendor_name; board++) {
if (vendor && (!board->lb_vendor
|| strcasecmp(board->lb_vendor, vendor)))
continue;
if (!board->lb_part || strcasecmp(board->lb_part, part))
continue;
if (!pci_dev_find(board->first_vendor, board->first_device))
continue;
if (board->second_vendor &&
!pci_dev_find(board->second_vendor, board->second_device))
continue;
if (vendor)
return board;
if (partmatch) {
/* a second entry has a matching part name */
printf("AMBIGUOUS BOARD NAME: %s\n", part);
printf("At least vendors '%s' and '%s' match.\n",
partmatch->lb_vendor, board->lb_vendor);
printf("Please use the full -m vendor:part syntax.\n");
return NULL;
}
partmatch = board;
}
if (partmatch)
return partmatch;
printf("\nUnknown vendor:board from coreboot table or -m option: %s:%s\n\n", vendor, part);
return NULL;
}
/**
* Match boards on PCI IDs and subsystem IDs.
* Second set of IDs can be main only or missing completely.
*/
static struct board_pciid_enable *board_match_pci_card_ids(void)
{
struct board_pciid_enable *board = board_pciid_enables;
for (; board->vendor_name; board++) {
if (!board->first_card_vendor || !board->first_card_device)
continue;
if (!pci_card_find(board->first_vendor, board->first_device,
board->first_card_vendor,
board->first_card_device))
continue;
if (board->second_vendor) {
if (board->second_card_vendor) {
if (!pci_card_find(board->second_vendor,
board->second_device,
board->second_card_vendor,
board->second_card_device))
continue;
} else {
if (!pci_dev_find(board->second_vendor,
board->second_device))
continue;
}
}
return board;
}
return NULL;
}
int board_flash_enable(const char *vendor, const char *part)
{
struct board_pciid_enable *board = NULL;
int ret = 0;
if (part)
board = board_match_coreboot_name(vendor, part);
if (!board)
board = board_match_pci_card_ids();
if (board) {
printf("Found board \"%s %s\", enabling flash write... ",
board->vendor_name, board->board_name);
ret = board->enable(board->vendor_name);
if (ret)
printf("FAILED!\n");
else
printf("OK.\n");
}
return ret;
}