| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2010 Carl-Daniel Hailfinger |
| * Copyright (C) 2010 Idwer Vollering |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* |
| * Datasheets: |
| * PCI/PCI-X Family of Gigabit Ethernet Controllers Software Developer's Manual |
| * 82540EP/EM, 82541xx, 82544GC/EI, 82545GM/EM, 82546GB/EB, and 82547xx |
| * http://www.intel.com/content/www/us/en/ethernet-controllers/pci-pci-x-family-gbe-controllers-software-dev-manual.html |
| * |
| * PCIe GbE Controllers Open Source Software Developer's Manual |
| * http://www.intel.com/content/www/us/en/ethernet-controllers/pcie-gbe-controllers-open-source-manual.html |
| * |
| * Intel 82574 Gigabit Ethernet Controller Family Datasheet |
| * http://www.intel.com/content/www/us/en/ethernet-controllers/82574l-gbe-controller-datasheet.html |
| * |
| * Intel 82599 10 GbE Controller Datasheet (331520) |
| * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/82599-10-gbe-controller-datasheet.pdf |
| */ |
| |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include "flash.h" |
| #include "programmer.h" |
| #include "hwaccess_physmap.h" |
| #include "platform/pci.h" |
| |
| #define PCI_VENDOR_ID_INTEL 0x8086 |
| #define MEMMAP_SIZE getpagesize() |
| |
| /* EEPROM/Flash Control & Data Register */ |
| #define EECD 0x10 |
| /* Flash Access Register */ |
| #define FLA 0x1c |
| |
| /* |
| * Register bits of EECD. |
| * Table 13-6 |
| * |
| * Bit 04, 05: FWE (Flash Write Enable Control) |
| * 00b = not allowed (on some cards this sends an erase command if bit 31 (FL_ER) of FLA is set) |
| * 01b = flash writes disabled |
| * 10b = flash writes enabled |
| * 11b = not allowed |
| */ |
| #define FLASH_WRITES_DISABLED 0x10 /* FWE: 10000b */ |
| #define FLASH_WRITES_ENABLED 0x20 /* FWE: 100000b */ |
| |
| /* Flash Access register bits |
| * Table 13-9 |
| */ |
| #define FL_SCK 0 |
| #define FL_CS 1 |
| #define FL_SI 2 |
| #define FL_SO 3 |
| #define FL_REQ 4 |
| #define FL_GNT 5 |
| #define FL_LOCKED 6 |
| #define FL_ABORT 7 |
| #define FL_CLR_ERR 8 |
| /* Currently unused */ |
| // #define FL_BUSY 30 |
| // #define FL_ER 31 |
| |
| static uint8_t *nicintel_spibar; |
| |
| static const struct dev_entry nics_intel_spi[] = { |
| {PCI_VENDOR_ID_INTEL, 0x105e, OK, "Intel", "82571EB Gigabit Ethernet Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x1076, OK, "Intel", "82541GI Gigabit Ethernet Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x107c, OK, "Intel", "82541PI Gigabit Ethernet Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x10b9, OK, "Intel", "82572EI Gigabit Ethernet Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x10d3, OK, "Intel", "82574L Gigabit Ethernet Controller"}, |
| |
| {PCI_VENDOR_ID_INTEL, 0x10d8, NT, "Intel", "82599 10 Gigabit Unprogrammed Network Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x10f7, NT, "Intel", "82599 10 Gigabit KX4 Dual Port Network Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x10f8, NT, "Intel", "82599 10 Gigabit Dual Port Backplane Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x10f9, NT, "Intel", "82599 10 Gigabit CX4 Dual Port Network Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x10fb, NT, "Intel", "82599 10-Gigabit SFI/SFP+ Network Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x10fc, OK, "Intel", "82599 10 Gigabit XAUI/BX4 Dual Port Network Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x1517, NT, "Intel", "82599 10 Gigabit KR Network Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x151c, NT, "Intel", "82599 10 Gigabit TN Network Controller"}, |
| {PCI_VENDOR_ID_INTEL, 0x1529, NT, "Intel", "82599 10 Gigabit Dual Port Network Controller with FCoE"}, |
| {PCI_VENDOR_ID_INTEL, 0x152a, NT, "Intel", "82599 10 Gigabit Dual Port Backplane Controller with FCoE"}, |
| {PCI_VENDOR_ID_INTEL, 0x1557, NT, "Intel", "82599 10 Gigabit SFI Network Controller"}, |
| |
| {PCI_VENDOR_ID_INTEL, 0x1531, OK, "Intel", "I210 Gigabit Network Connection Unprogrammed"}, |
| {PCI_VENDOR_ID_INTEL, 0x1532, NT, "Intel", "I211 Gigabit Network Connection Unprogrammed"}, |
| {PCI_VENDOR_ID_INTEL, 0x1533, NT, "Intel", "I210 Gigabit Network Connection"}, |
| {PCI_VENDOR_ID_INTEL, 0x1536, NT, "Intel", "I210 Gigabit Network Connection SERDES Fiber"}, |
| {PCI_VENDOR_ID_INTEL, 0x1537, NT, "Intel", "I210 Gigabit Network Connection SERDES Backplane"}, |
| {PCI_VENDOR_ID_INTEL, 0x1538, NT, "Intel", "I210 Gigabit Network Connection SGMII"}, |
| {PCI_VENDOR_ID_INTEL, 0x1539, NT, "Intel", "I211 Gigabit Network Connection"}, |
| |
| {0}, |
| }; |
| |
| static void nicintel_request_spibus(void) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp |= BIT(FL_REQ); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| |
| /* Wait until we are allowed to use the SPI bus. */ |
| while (!(pci_mmio_readl(nicintel_spibar + FLA) & BIT(FL_GNT))) ; |
| } |
| |
| static void nicintel_release_spibus(void) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp &= ~BIT(FL_REQ); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| } |
| |
| static void nicintel_bitbang_set_cs(int val) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp &= ~BIT(FL_CS); |
| tmp |= (val << FL_CS); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| } |
| |
| static void nicintel_bitbang_set_sck(int val) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp &= ~BIT(FL_SCK); |
| tmp |= (val << FL_SCK); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| } |
| |
| static void nicintel_bitbang_set_mosi(int val) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp &= ~BIT(FL_SI); |
| tmp |= (val << FL_SI); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| } |
| |
| static void nicintel_bitbang_set_sck_set_mosi(int sck, int mosi) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp &= ~BIT(FL_SCK); |
| tmp &= ~BIT(FL_SI); |
| tmp |= (sck << FL_SCK); |
| tmp |= (mosi << FL_SI); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| } |
| |
| static int nicintel_bitbang_get_miso(void) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp = (tmp >> FL_SO) & 0x1; |
| return tmp; |
| } |
| |
| static int nicintel_bitbang_set_sck_get_miso(int sck) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| tmp &= ~BIT(FL_SCK); |
| tmp |= (sck << FL_SCK); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| return (tmp >> FL_SO) & 0x1; |
| } |
| |
| static const struct bitbang_spi_master bitbang_spi_master_nicintel = { |
| .set_cs = nicintel_bitbang_set_cs, |
| .set_sck = nicintel_bitbang_set_sck, |
| .set_mosi = nicintel_bitbang_set_mosi, |
| .set_sck_set_mosi = nicintel_bitbang_set_sck_set_mosi, |
| .set_sck_get_miso = nicintel_bitbang_set_sck_get_miso, |
| .get_miso = nicintel_bitbang_get_miso, |
| .request_bus = nicintel_request_spibus, |
| .release_bus = nicintel_release_spibus, |
| .half_period = 1, |
| }; |
| |
| static int nicintel_spi_shutdown(void *data) |
| { |
| uint32_t tmp; |
| |
| /* Disable writes manually. See the comment about EECD in nicintel_spi_init() for details. */ |
| tmp = pci_mmio_readl(nicintel_spibar + EECD); |
| tmp &= ~FLASH_WRITES_ENABLED; |
| tmp |= FLASH_WRITES_DISABLED; |
| pci_mmio_writel(tmp, nicintel_spibar + EECD); |
| |
| return 0; |
| } |
| |
| static int nicintel_spi_82599_enable_flash(void) |
| { |
| uint32_t tmp; |
| |
| /* Automatic restore of EECD on shutdown is not possible because EECD |
| * does not only contain FLASH_WRITES_DISABLED|FLASH_WRITES_ENABLED, |
| * but other bits with side effects as well. Those other bits must be |
| * left untouched. |
| */ |
| tmp = pci_mmio_readl(nicintel_spibar + EECD); |
| tmp &= ~FLASH_WRITES_DISABLED; |
| tmp |= FLASH_WRITES_ENABLED; |
| pci_mmio_writel(tmp, nicintel_spibar + EECD); |
| |
| /* test if FWE is really set to allow writes */ |
| tmp = pci_mmio_readl(nicintel_spibar + EECD); |
| if ( (tmp & FLASH_WRITES_DISABLED) || !(tmp & FLASH_WRITES_ENABLED) ) { |
| msg_perr("Enabling flash write access failed.\n"); |
| return 1; |
| } |
| |
| if (register_shutdown(nicintel_spi_shutdown, NULL)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int nicintel_spi_i210_enable_flash(void) |
| { |
| uint32_t tmp; |
| |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| if (tmp & BIT(FL_LOCKED)) { |
| msg_perr("Flash is in Secure Mode. Abort.\n"); |
| return 1; |
| } |
| |
| if (!(tmp & BIT(FL_ABORT))) |
| return 0; |
| |
| tmp |= BIT(FL_CLR_ERR); |
| pci_mmio_writel(tmp, nicintel_spibar + FLA); |
| tmp = pci_mmio_readl(nicintel_spibar + FLA); |
| if (!(tmp & BIT(FL_ABORT))) { |
| msg_perr("Unable to clear Flash Access Error. Abort\n"); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int nicintel_spi_init(void) |
| { |
| struct pci_dev *dev = NULL; |
| |
| dev = pcidev_init(nics_intel_spi, PCI_BASE_ADDRESS_0); |
| if (!dev) |
| return 1; |
| |
| uint32_t io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0); |
| if (!io_base_addr) |
| return 1; |
| |
| if ((dev->device_id & 0xfff0) == 0x1530) { |
| nicintel_spibar = rphysmap("Intel I210 Gigabit w/ SPI flash", io_base_addr + 0x12000, |
| MEMMAP_SIZE); |
| if (!nicintel_spibar || nicintel_spi_i210_enable_flash()) |
| return 1; |
| } else if (dev->device_id < 0x10d8) { |
| nicintel_spibar = rphysmap("Intel Gigabit NIC w/ SPI flash", io_base_addr, |
| MEMMAP_SIZE); |
| if (!nicintel_spibar || nicintel_spi_82599_enable_flash()) |
| return 1; |
| } else { |
| nicintel_spibar = rphysmap("Intel 10 Gigabit NIC w/ SPI flash", io_base_addr + 0x10000, |
| MEMMAP_SIZE); |
| if (!nicintel_spibar || nicintel_spi_82599_enable_flash()) |
| return 1; |
| } |
| |
| if (register_spi_bitbang_master(&bitbang_spi_master_nicintel)) |
| return 1; |
| |
| return 0; |
| } |
| |
| const struct programmer_entry programmer_nicintel_spi = { |
| .name = "nicintel_spi", |
| .type = PCI, |
| .devs.dev = nics_intel_spi, |
| .init = nicintel_spi_init, |
| .map_flash_region = fallback_map, |
| .unmap_flash_region = fallback_unmap, |
| .delay = internal_delay, |
| }; |