| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2000 Silicon Integrated System Corporation |
| * Copyright (C) 2005-2007 coresystems GmbH <stepan@coresystems.de> |
| * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /* |
| * Contains the chipset specific flash enables. |
| */ |
| |
| #define _LARGEFILE64_SOURCE |
| |
| #include <stdio.h> |
| #include <pci/pci.h> |
| #include <stdlib.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <sys/mman.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include "flash.h" |
| |
| static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name) |
| { |
| uint8_t tmp; |
| |
| /* |
| * ROM Write enable, 0xFFFC0000-0xFFFDFFFF and |
| * 0xFFFE0000-0xFFFFFFFF ROM select enable. |
| */ |
| tmp = pci_read_byte(dev, 0x47); |
| tmp |= 0x46; |
| pci_write_byte(dev, 0x47, tmp); |
| |
| return 0; |
| } |
| |
| static int enable_flash_sis630(struct pci_dev *dev, const char *name) |
| { |
| uint8_t b; |
| |
| /* Enable 0xFFF8000~0xFFFF0000 decoding on SiS 540/630. */ |
| b = pci_read_byte(dev, 0x40); |
| pci_write_byte(dev, 0x40, b | 0xb); |
| |
| /* Flash write enable on SiS 540/630. */ |
| b = pci_read_byte(dev, 0x45); |
| pci_write_byte(dev, 0x45, b | 0x40); |
| |
| /* The same thing on SiS 950 Super I/O side... */ |
| |
| /* First probe for Super I/O on config port 0x2e. */ |
| outb(0x87, 0x2e); |
| outb(0x01, 0x2e); |
| outb(0x55, 0x2e); |
| outb(0x55, 0x2e); |
| |
| if (inb(0x2f) != 0x87) { |
| /* If that failed, try config port 0x4e. */ |
| outb(0x87, 0x4e); |
| outb(0x01, 0x4e); |
| outb(0x55, 0x4e); |
| outb(0xaa, 0x4e); |
| if (inb(0x4f) != 0x87) { |
| printf("Can not access SiS 950\n"); |
| return -1; |
| } |
| outb(0x24, 0x4e); |
| b = inb(0x4f) | 0xfc; |
| outb(0x24, 0x4e); |
| outb(b, 0x4f); |
| outb(0x02, 0x4e); |
| outb(0x02, 0x4f); |
| } |
| |
| outb(0x24, 0x2e); |
| printf("2f is %#x\n", inb(0x2f)); |
| b = inb(0x2f) | 0xfc; |
| outb(0x24, 0x2e); |
| outb(b, 0x2f); |
| |
| outb(0x02, 0x2e); |
| outb(0x02, 0x2f); |
| |
| return 0; |
| } |
| |
| /* Datasheet: |
| * - Name: 82371AB PCI-TO-ISA / IDE XCELERATOR (PIIX4) |
| * - URL: http://www.intel.com/design/intarch/datashts/290562.htm |
| * - PDF: http://www.intel.com/design/intarch/datashts/29056201.pdf |
| * - Order Number: 290562-001 |
| */ |
| static int enable_flash_piix4(struct pci_dev *dev, const char *name) |
| { |
| uint16_t old, new; |
| uint16_t xbcs = 0x4e; /* X-Bus Chip Select register. */ |
| |
| old = pci_read_word(dev, xbcs); |
| |
| /* Set bit 9: 1-Meg Extended BIOS Enable (PCI master accesses to |
| * FFF00000-FFF7FFFF are forwarded to ISA). |
| * Set bit 7: Extended BIOS Enable (PCI master accesses to |
| * FFF80000-FFFDFFFF are forwarded to ISA). |
| * Set bit 6: Lower BIOS Enable (PCI master, or ISA master accesses to |
| * the lower 64-Kbyte BIOS block (E0000-EFFFF) at the top |
| * of 1 Mbyte, or the aliases at the top of 4 Gbyte |
| * (FFFE0000-FFFEFFFF) result in the generation of BIOSCS#. |
| * Note: Accesses to FFFF0000-FFFFFFFF are always forwarded to ISA. |
| * Set bit 2: BIOSCS# Write Enable (1=enable, 0=disable). |
| */ |
| new = old | 0x2c4; |
| |
| if (new == old) |
| return 0; |
| |
| pci_write_word(dev, xbcs, new); |
| |
| if (pci_read_word(dev, xbcs) != new) { |
| printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", xbcs, new, name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * See ie. page 375 of "Intel I/O Controller Hub 7 (ICH7) Family Datasheet" |
| * http://download.intel.com/design/chipsets/datashts/30701303.pdf |
| */ |
| static int enable_flash_ich(struct pci_dev *dev, const char *name, |
| int bios_cntl) |
| { |
| uint8_t old, new; |
| |
| /* |
| * Note: the ICH0-ICH5 BIOS_CNTL register is actually 16 bit wide, but |
| * just treating it as 8 bit wide seems to work fine in practice. |
| */ |
| old = pci_read_byte(dev, bios_cntl); |
| |
| printf_debug("BIOS Lock Enable: %sabled, ", |
| (old & (1 << 1)) ? "en" : "dis"); |
| printf_debug("BIOS Write Enable: %sabled, ", |
| (old & (1 << 0)) ? "en" : "dis"); |
| printf_debug("BIOS_CNTL is 0x%x\n", old); |
| |
| new = old | 1; |
| |
| if (new == old) |
| return 0; |
| |
| pci_write_byte(dev, bios_cntl, new); |
| |
| if (pci_read_byte(dev, bios_cntl) != new) { |
| printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", bios_cntl, new, name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int enable_flash_ich_4e(struct pci_dev *dev, const char *name) |
| { |
| return enable_flash_ich(dev, name, 0x4e); |
| } |
| |
| static int enable_flash_ich_dc(struct pci_dev *dev, const char *name) |
| { |
| return enable_flash_ich(dev, name, 0xdc); |
| } |
| |
| void *ich_spibar = NULL; |
| |
| static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, unsigned long spibar) |
| { |
| uint8_t old, new, bbs; |
| uint32_t tmp, gcs; |
| void *rcrb; |
| |
| /* Read the Root Complex Base Address Register (RCBA) */ |
| tmp = pci_read_long(dev, 0xf0); |
| /* Calculate the Root Complex Register Block address */ |
| tmp &= 0xffffc000; |
| printf_debug("Root Complex Register Block address = 0x%x\n", tmp); |
| rcrb = mmap(0, 0x4000, PROT_READ | PROT_WRITE, MAP_SHARED, fd_mem, (off_t)tmp); |
| if (rcrb == MAP_FAILED) { |
| perror("Can't mmap memory using " MEM_DEV); |
| exit(1); |
| } |
| printf_debug("GCS address = 0x%x\n", tmp + 0x3410); |
| gcs = *(volatile uint32_t *)(rcrb + 0x3410); |
| printf_debug("GCS = 0x%x: ", gcs); |
| printf_debug("BIOS Interface Lock-Down: %sabled, ", |
| (gcs & 0x1) ? "en" : "dis"); |
| bbs = (gcs >> 10) & 0x3; |
| printf_debug("BOOT BIOS Straps: 0x%x (%s)\n", bbs, |
| (bbs == 0x3) ? "LPC" : ((bbs == 0x2) ? "PCI" : "SPI")); |
| |
| /* SPIBAR is at RCRB+0x3020 for ICH[78] and RCRB+0x3800 for ICH9. */ |
| printf_debug("SPIBAR = 0x%lx\n", tmp + spibar); |
| /* TODO: Dump the SPI config regs */ |
| ich_spibar = rcrb + spibar; |
| |
| old = pci_read_byte(dev, 0xdc); |
| printf_debug("SPI Read Configuration: "); |
| new = (old >> 2) & 0x3; |
| switch (new) { |
| case 0: |
| case 1: |
| case 2: |
| printf_debug("prefetching %sabled, caching %sabled, ", |
| (new & 0x2) ? "en" : "dis", (new & 0x1) ? "dis" : "en"); |
| break; |
| default: |
| printf_debug("invalid prefetching/caching settings, "); |
| break; |
| } |
| return enable_flash_ich_dc(dev, name); |
| } |
| |
| static int enable_flash_ich7(struct pci_dev *dev, const char *name) |
| { |
| return enable_flash_ich_dc_spi(dev, name, 0x3020); |
| } |
| |
| int ich9_detected = 0; |
| |
| static int enable_flash_ich8(struct pci_dev *dev, const char *name) |
| { |
| ich9_detected = 1; |
| return enable_flash_ich_dc_spi(dev, name, 0x3020); |
| } |
| |
| static int enable_flash_ich9(struct pci_dev *dev, const char *name) |
| { |
| ich9_detected = 1; |
| return enable_flash_ich_dc_spi(dev, name, 0x3800); |
| } |
| |
| static int enable_flash_vt823x(struct pci_dev *dev, const char *name) |
| { |
| uint8_t val; |
| |
| /* enable ROM decode range (1MB) FFC00000 - FFFFFFFF*/ |
| pci_write_byte(dev, 0x41, 0x7f); |
| |
| /* ROM write enable */ |
| val = pci_read_byte(dev, 0x40); |
| val |= 0x10; |
| pci_write_byte(dev, 0x40, val); |
| |
| if (pci_read_byte(dev, 0x40) != val) { |
| printf("\nWARNING: Failed to enable ROM Write on \"%s\"\n", |
| name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int enable_flash_cs5530(struct pci_dev *dev, const char *name) |
| { |
| uint8_t reg8; |
| |
| #define DECODE_CONTROL_REG2 0x5b /* F0 index 0x5b */ |
| #define ROM_AT_LOGIC_CONTROL_REG 0x52 /* F0 index 0x52 */ |
| |
| #define LOWER_ROM_ADDRESS_RANGE (1 << 0) |
| #define ROM_WRITE_ENABLE (1 << 1) |
| #define UPPER_ROM_ADDRESS_RANGE (1 << 2) |
| #define BIOS_ROM_POSITIVE_DECODE (1 << 5) |
| |
| /* Decode 0x000E0000-0x000FFFFF (128 KB), not just 64 KB, and |
| * decode 0xFF000000-0xFFFFFFFF (16 MB), not just 256 KB. |
| * Make the configured ROM areas writable. |
| */ |
| reg8 = pci_read_byte(dev, ROM_AT_LOGIC_CONTROL_REG); |
| reg8 |= LOWER_ROM_ADDRESS_RANGE; |
| reg8 |= UPPER_ROM_ADDRESS_RANGE; |
| reg8 |= ROM_WRITE_ENABLE; |
| pci_write_byte(dev, ROM_AT_LOGIC_CONTROL_REG, reg8); |
| |
| /* Set positive decode on ROM. */ |
| reg8 = pci_read_byte(dev, DECODE_CONTROL_REG2); |
| reg8 |= BIOS_ROM_POSITIVE_DECODE; |
| pci_write_byte(dev, DECODE_CONTROL_REG2, reg8); |
| |
| return 0; |
| } |
| |
| /** |
| * Geode systems write protect the BIOS via RCONFs (cache settings similar |
| * to MTRRs). To unlock, change MSR 0x1808 top byte to 0x22. Reading and |
| * writing to MSRs, however requires instructions rdmsr/wrmsr, which are |
| * ring0 privileged instructions so only the kernel can do the read/write. |
| * This function, therefore, requires that the msr kernel module be loaded |
| * to access these instructions from user space using device /dev/cpu/0/msr. |
| * |
| * This hard-coded location could have potential problems on SMP machines |
| * since it assumes cpu0, but it is safe on the Geode which is not SMP. |
| * |
| * Geode systems also write protect the NOR flash chip itself via MSR_NORF_CTL. |
| * To enable write to NOR Boot flash for the benefit of systems that have such |
| * a setup, raise MSR 0x51400018 WE_CS3 (write enable Boot Flash Chip Select). |
| * |
| * This is probably not portable beyond Linux. |
| */ |
| static int enable_flash_cs5536(struct pci_dev *dev, const char *name) |
| { |
| #define MSR_RCONF_DEFAULT 0x1808 |
| #define MSR_NORF_CTL 0x51400018 |
| |
| int fd_msr; |
| unsigned char buf[8]; |
| |
| fd_msr = open("/dev/cpu/0/msr", O_RDWR); |
| if (!fd_msr) { |
| perror("open msr"); |
| return -1; |
| } |
| |
| if (lseek64(fd_msr, (off64_t) MSR_RCONF_DEFAULT, SEEK_SET) == -1) { |
| perror("lseek64"); |
| printf("Cannot operate on MSR. Did you run 'modprobe msr'?\n"); |
| close(fd_msr); |
| return -1; |
| } |
| |
| if (read(fd_msr, buf, 8) != 8) { |
| perror("read msr"); |
| close(fd_msr); |
| return -1; |
| } |
| |
| if (buf[7] != 0x22) { |
| buf[7] &= 0xfb; |
| if (lseek64(fd_msr, (off64_t) MSR_RCONF_DEFAULT, SEEK_SET) == -1) { |
| perror("lseek64"); |
| close(fd_msr); |
| return -1; |
| } |
| |
| if (write(fd_msr, buf, 8) < 0) { |
| perror("msr write"); |
| close(fd_msr); |
| return -1; |
| } |
| } |
| |
| if (lseek64(fd_msr, (off64_t) MSR_NORF_CTL, SEEK_SET) == -1) { |
| perror("lseek64"); |
| close(fd_msr); |
| return -1; |
| } |
| |
| if (read(fd_msr, buf, 8) != 8) { |
| perror("read msr"); |
| close(fd_msr); |
| return -1; |
| } |
| |
| /* Raise WE_CS3 bit. */ |
| buf[0] |= 0x08; |
| |
| if (lseek64(fd_msr, (off64_t) MSR_NORF_CTL, SEEK_SET) == -1) { |
| perror("lseek64"); |
| close(fd_msr); |
| return -1; |
| } |
| if (write(fd_msr, buf, 8) < 0) { |
| perror("msr write"); |
| close(fd_msr); |
| return -1; |
| } |
| |
| close(fd_msr); |
| |
| #undef MSR_RCONF_DEFAULT |
| #undef MSR_NORF_CTL |
| return 0; |
| } |
| |
| static int enable_flash_sc1100(struct pci_dev *dev, const char *name) |
| { |
| uint8_t new; |
| |
| pci_write_byte(dev, 0x52, 0xee); |
| |
| new = pci_read_byte(dev, 0x52); |
| |
| if (new != 0xee) { |
| printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x52, new, name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int enable_flash_sis5595(struct pci_dev *dev, const char *name) |
| { |
| uint8_t new, newer; |
| |
| new = pci_read_byte(dev, 0x45); |
| |
| new &= (~0x20); /* Clear bit 5. */ |
| new |= 0x4; /* Set bit 2. */ |
| |
| pci_write_byte(dev, 0x45, new); |
| |
| newer = pci_read_byte(dev, 0x45); |
| if (newer != new) { |
| printf("tried to set register 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x45, new, name); |
| printf("Stuck at 0x%x\n", newer); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int enable_flash_amd8111(struct pci_dev *dev, const char *name) |
| { |
| uint8_t old, new; |
| |
| /* Enable decoding at 0xffb00000 to 0xffffffff. */ |
| old = pci_read_byte(dev, 0x43); |
| new = old | 0xC0; |
| if (new != old) { |
| pci_write_byte(dev, 0x43, new); |
| if (pci_read_byte(dev, 0x43) != new) { |
| printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x43, new, name); |
| } |
| } |
| |
| old = pci_read_byte(dev, 0x40); |
| new = old | 0x01; |
| if (new == old) |
| return 0; |
| pci_write_byte(dev, 0x40, new); |
| |
| if (pci_read_byte(dev, 0x40) != new) { |
| printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x40, new, name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int enable_flash_ck804(struct pci_dev *dev, const char *name) |
| { |
| uint8_t old, new; |
| |
| old = pci_read_byte(dev, 0x88); |
| new = old | 0xc0; |
| if (new != old) { |
| pci_write_byte(dev, 0x88, new); |
| if (pci_read_byte(dev, 0x88) != new) { |
| printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x88, new, name); |
| } |
| } |
| |
| old = pci_read_byte(dev, 0x6d); |
| new = old | 0x01; |
| if (new == old) |
| return 0; |
| pci_write_byte(dev, 0x6d, new); |
| |
| if (pci_read_byte(dev, 0x6d) != new) { |
| printf("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", 0x6d, new, name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) */ |
| static int enable_flash_sb400(struct pci_dev *dev, const char *name) |
| { |
| uint8_t tmp; |
| struct pci_filter f; |
| struct pci_dev *smbusdev; |
| |
| /* Look for the SMBus device. */ |
| pci_filter_init((struct pci_access *)0, &f); |
| f.vendor = 0x1002; |
| f.device = 0x4372; |
| |
| for (smbusdev = pacc->devices; smbusdev; smbusdev = smbusdev->next) { |
| if (pci_filter_match(&f, smbusdev)) { |
| break; |
| } |
| } |
| |
| if (!smbusdev) { |
| fprintf(stderr, "ERROR: SMBus device not found. Aborting.\n"); |
| exit(1); |
| } |
| |
| /* Enable some SMBus stuff. */ |
| tmp = pci_read_byte(smbusdev, 0x79); |
| tmp |= 0x01; |
| pci_write_byte(smbusdev, 0x79, tmp); |
| |
| /* Change southbridge. */ |
| tmp = pci_read_byte(dev, 0x48); |
| tmp |= 0x21; |
| pci_write_byte(dev, 0x48, tmp); |
| |
| /* Now become a bit silly. */ |
| tmp = inb(0xc6f); |
| outb(tmp, 0xeb); |
| outb(tmp, 0xeb); |
| tmp |= 0x40; |
| outb(tmp, 0xc6f); |
| outb(tmp, 0xeb); |
| outb(tmp, 0xeb); |
| |
| return 0; |
| } |
| |
| static int enable_flash_mcp55(struct pci_dev *dev, const char *name) |
| { |
| uint8_t old, new, byte; |
| uint16_t word; |
| |
| /* Set the 0-16 MB enable bits. */ |
| byte = pci_read_byte(dev, 0x88); |
| byte |= 0xff; /* 256K */ |
| pci_write_byte(dev, 0x88, byte); |
| byte = pci_read_byte(dev, 0x8c); |
| byte |= 0xff; /* 1M */ |
| pci_write_byte(dev, 0x8c, byte); |
| word = pci_read_word(dev, 0x90); |
| word |= 0x7fff; /* 16M */ |
| pci_write_word(dev, 0x90, word); |
| |
| old = pci_read_byte(dev, 0x6d); |
| new = old | 0x01; |
| if (new == old) |
| return 0; |
| pci_write_byte(dev, 0x6d, new); |
| |
| if (pci_read_byte(dev, 0x6d) != new) { |
| printf |
| ("tried to set 0x%x to 0x%x on %s failed (WARNING ONLY)\n", |
| 0x6d, new, name); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int enable_flash_ht1000(struct pci_dev *dev, const char *name) |
| { |
| uint8_t byte; |
| |
| /* Set the 4MB enable bit. */ |
| byte = pci_read_byte(dev, 0x41); |
| byte |= 0x0e; |
| pci_write_byte(dev, 0x41, byte); |
| |
| byte = pci_read_byte(dev, 0x43); |
| byte |= (1 << 4); |
| pci_write_byte(dev, 0x43, byte); |
| |
| return 0; |
| } |
| |
| typedef struct penable { |
| uint16_t vendor, device; |
| const char *name; |
| int (*doit) (struct pci_dev *dev, const char *name); |
| } FLASH_ENABLE; |
| |
| static const FLASH_ENABLE enables[] = { |
| {0x1039, 0x0630, "SiS630", enable_flash_sis630}, |
| {0x8086, 0x7110, "Intel PIIX4/4E/4M", enable_flash_piix4}, |
| {0x8086, 0x7198, "Intel 440MX", enable_flash_piix4}, |
| {0x8086, 0x2410, "Intel ICH", enable_flash_ich_4e}, |
| {0x8086, 0x2420, "Intel ICH0", enable_flash_ich_4e}, |
| {0x8086, 0x2440, "Intel ICH2", enable_flash_ich_4e}, |
| {0x8086, 0x244c, "Intel ICH2-M", enable_flash_ich_4e}, |
| {0x8086, 0x2480, "Intel ICH3-S", enable_flash_ich_4e}, |
| {0x8086, 0x248c, "Intel ICH3-M", enable_flash_ich_4e}, |
| {0x8086, 0x24c0, "Intel ICH4/ICH4-L", enable_flash_ich_4e}, |
| {0x8086, 0x24cc, "Intel ICH4-M", enable_flash_ich_4e}, |
| {0x8086, 0x24d0, "Intel ICH5/ICH5R", enable_flash_ich_4e}, |
| {0x8086, 0x25a1, "Intel 6300ESB", enable_flash_ich_4e}, |
| {0x8086, 0x2640, "Intel ICH6/ICH6R", enable_flash_ich_dc}, |
| {0x8086, 0x2641, "Intel ICH6-M", enable_flash_ich_dc}, |
| {0x8086, 0x27b0, "Intel ICH7DH", enable_flash_ich7}, |
| {0x8086, 0x27b8, "Intel ICH7/ICH7R", enable_flash_ich7}, |
| {0x8086, 0x27b9, "Intel ICH7M", enable_flash_ich7}, |
| {0x8086, 0x27bd, "Intel ICH7MDH", enable_flash_ich7}, |
| {0x8086, 0x2810, "Intel ICH8/ICH8R", enable_flash_ich8}, |
| {0x8086, 0x2811, "Intel ICH8M-E", enable_flash_ich8}, |
| {0x8086, 0x2812, "Intel ICH8DH", enable_flash_ich8}, |
| {0x8086, 0x2814, "Intel ICH8DO", enable_flash_ich8}, |
| {0x8086, 0x2815, "Intel ICH8M", enable_flash_ich8}, |
| {0x8086, 0x2912, "Intel ICH9DH", enable_flash_ich9}, |
| {0x8086, 0x2914, "Intel ICH9DO", enable_flash_ich9}, |
| {0x8086, 0x2916, "Intel ICH9R", enable_flash_ich9}, |
| {0x8086, 0x2917, "Intel ICH9M-E", enable_flash_ich9}, |
| {0x8086, 0x2918, "Intel ICH9", enable_flash_ich9}, |
| {0x8086, 0x2919, "Intel ICH9M", enable_flash_ich9}, |
| {0x1106, 0x8231, "VIA VT8231", enable_flash_vt823x}, |
| {0x1106, 0x3177, "VIA VT8235", enable_flash_vt823x}, |
| {0x1106, 0x3227, "VIA VT8237", enable_flash_vt823x}, |
| {0x1106, 0x8324, "VIA CX700", enable_flash_vt823x}, |
| {0x1106, 0x0686, "VIA VT82C686", enable_flash_amd8111}, |
| {0x1078, 0x0100, "AMD CS5530(A)", enable_flash_cs5530}, |
| {0x100b, 0x0510, "AMD SC1100", enable_flash_sc1100}, |
| {0x1039, 0x0008, "SiS5595", enable_flash_sis5595}, |
| {0x1022, 0x2080, "AMD CS5536", enable_flash_cs5536}, |
| {0x1022, 0x7468, "AMD8111", enable_flash_amd8111}, |
| {0x10B9, 0x1533, "ALi M1533", enable_flash_ali_m1533}, |
| {0x10de, 0x0050, "NVIDIA CK804", enable_flash_ck804}, /* LPC */ |
| {0x10de, 0x0051, "NVIDIA CK804", enable_flash_ck804}, /* Pro */ |
| /* Slave, should not be here, to fix known bug for A01. */ |
| {0x10de, 0x00d3, "NVIDIA CK804", enable_flash_ck804}, |
| {0x10de, 0x0260, "NVIDIA MCP51", enable_flash_ck804}, |
| {0x10de, 0x0261, "NVIDIA MCP51", enable_flash_ck804}, |
| {0x10de, 0x0262, "NVIDIA MCP51", enable_flash_ck804}, |
| {0x10de, 0x0263, "NVIDIA MCP51", enable_flash_ck804}, |
| {0x10de, 0x0360, "NVIDIA MCP55", enable_flash_mcp55}, /* M57SLI*/ |
| {0x10de, 0x0361, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */ |
| {0x10de, 0x0362, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */ |
| {0x10de, 0x0363, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */ |
| {0x10de, 0x0364, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */ |
| {0x10de, 0x0365, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */ |
| {0x10de, 0x0366, "NVIDIA MCP55", enable_flash_mcp55}, /* LPC */ |
| {0x10de, 0x0367, "NVIDIA MCP55", enable_flash_mcp55}, /* Pro */ |
| {0x1002, 0x4377, "ATI SB400", enable_flash_sb400}, |
| {0x1166, 0x0205, "Broadcom HT-1000", enable_flash_ht1000}, |
| }; |
| |
| void print_supported_chipsets(void) |
| { |
| int i; |
| |
| printf("\nSupported chipsets:\n\n"); |
| |
| for (i = 0; i < ARRAY_SIZE(enables); i++) |
| printf("%s (%04x:%04x)\n", enables[i].name, |
| enables[i].vendor, enables[i].device); |
| } |
| |
| int chipset_flash_enable(void) |
| { |
| struct pci_dev *dev = 0; |
| int ret = -2; /* Nothing! */ |
| int i; |
| |
| /* Now let's try to find the chipset we have... */ |
| for (i = 0; i < ARRAY_SIZE(enables); i++) { |
| dev = pci_dev_find(enables[i].vendor, enables[i].device); |
| if (dev) |
| break; |
| } |
| |
| if (dev) { |
| printf("Found chipset \"%s\", enabling flash write... ", |
| enables[i].name); |
| |
| ret = enables[i].doit(dev, enables[i].name); |
| if (ret) |
| printf("FAILED!\n"); |
| else |
| printf("OK.\n"); |
| } |
| |
| return ret; |
| } |