| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2011-2012 Stefan Tauner |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include "flash.h" |
| #include "spi_command.h" |
| #include "spi.h" |
| #include "chipdrivers.h" |
| |
| static int spi_sfdp_read_sfdp_chunk(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) |
| { |
| int i, ret; |
| uint8_t *newbuf; |
| const unsigned char cmd[JEDEC_SFDP_OUTSIZE] = { |
| JEDEC_SFDP, |
| (address >> 16) & 0xff, |
| (address >> 8) & 0xff, |
| (address >> 0) & 0xff, |
| /* FIXME: the following dummy byte explodes on some programmers. |
| * One workaround is to read the dummy byte |
| * instead and discard its value. |
| */ |
| 0 |
| }; |
| msg_cspew("%s: addr=0x%x, len=%d, data:\n", __func__, address, len); |
| newbuf = malloc(len + 1); |
| if (!newbuf) |
| return SPI_PROGRAMMER_ERROR; |
| ret = spi_send_command(flash, sizeof(cmd) - 1, len + 1, cmd, newbuf); |
| memmove(buf, newbuf + 1, len); |
| free(newbuf); |
| if (ret) |
| return ret; |
| for (i = 0; i < len; i++) |
| msg_cspew(" 0x%02x", buf[i]); |
| msg_cspew("\n"); |
| return 0; |
| } |
| |
| static int spi_sfdp_read_sfdp(struct flashctx *flash, uint32_t address, uint8_t *buf, int len) |
| { |
| /* FIXME: There are different upper bounds for the number of bytes to |
| * read on the various programmers (even depending on the rest of the |
| * structure of the transaction). 2 is a safe bet. */ |
| int maxstep = 2; |
| int ret = 0; |
| while (len > 0) { |
| int step = min(len, maxstep); |
| ret = spi_sfdp_read_sfdp_chunk(flash, address, buf, step); |
| if (ret) |
| return ret; |
| address += step; |
| buf += step; |
| len -= step; |
| } |
| return ret; |
| } |
| |
| struct sfdp_tbl_hdr { |
| uint8_t id; |
| uint8_t v_minor; |
| uint8_t v_major; |
| uint8_t len; |
| uint32_t ptp; /* 24b pointer */ |
| }; |
| |
| static int sfdp_add_uniform_eraser(struct flashchip *chip, uint8_t opcode, uint32_t block_size) |
| { |
| int i; |
| uint32_t total_size = chip->total_size * 1024; |
| erasefunc_t *erasefn = spi25_get_erasefn_from_opcode(opcode); |
| |
| if (erasefn == NULL || total_size == 0 || block_size == 0 || |
| total_size % block_size != 0) { |
| msg_cdbg("%s: invalid input, please report to " |
| "flashprog@flashprog.org\n", __func__); |
| return 1; |
| } |
| |
| for (i = 0; i < NUM_ERASEFUNCTIONS; i++) { |
| struct block_eraser *eraser = &chip->block_erasers[i]; |
| /* Check for duplicates (including (some) non-uniform ones). */ |
| if (eraser->eraseblocks[0].size == block_size && |
| eraser->block_erase == erasefn) { |
| msg_cdbg2(" Tried to add a duplicate block eraser: " |
| "%d x %d B with opcode 0x%02x.\n", |
| total_size/block_size, block_size, opcode); |
| return 1; |
| } |
| if (eraser->eraseblocks[0].size != 0 || |
| eraser->block_erase != NULL) { |
| msg_cspew(" Block Eraser %d is already occupied.\n", |
| i); |
| continue; |
| } |
| |
| eraser->block_erase = erasefn; |
| eraser->eraseblocks[0].size = block_size; |
| eraser->eraseblocks[0].count = total_size/block_size; |
| msg_cdbg2(" Block eraser %d: %d x %d B with opcode " |
| "0x%02x\n", i, total_size/block_size, block_size, |
| opcode); |
| return 0; |
| } |
| msg_cinfo("%s: Not enough space to store another eraser (i=%d).\n" |
| "Please report this at flashprog@flashprog.org\n", |
| __func__, i); |
| return 1; |
| } |
| |
| static int sfdp_fill_flash(struct flashchip *chip, uint8_t *buf, uint16_t len) |
| { |
| uint8_t opcode_4k_erase = 0xFF; |
| uint32_t tmp32; |
| uint8_t tmp8; |
| uint32_t total_size; /* in bytes */ |
| uint32_t block_size; |
| int j; |
| |
| msg_cdbg("Parsing JEDEC flash parameter table... "); |
| msg_cdbg2("\n"); |
| |
| /* 1. double word */ |
| tmp32 = ((unsigned int)buf[(4 * 0) + 0]); |
| tmp32 |= ((unsigned int)buf[(4 * 0) + 1]) << 8; |
| tmp32 |= ((unsigned int)buf[(4 * 0) + 2]) << 16; |
| tmp32 |= ((unsigned int)buf[(4 * 0) + 3]) << 24; |
| |
| tmp8 = (tmp32 >> 17) & 0x3; |
| switch (tmp8) { |
| case 0x0: |
| msg_cdbg2(" 3-Byte only addressing.\n"); |
| break; |
| case 0x1: |
| msg_cdbg2(" 3-Byte (and optionally 4-Byte) addressing.\n"); |
| break; |
| case 0x2: |
| msg_cdbg(" 4-Byte only addressing (not supported by " |
| "flashprog).\n"); |
| return 1; |
| default: |
| msg_cdbg(" Required addressing mode (0x%x) not supported.\n", |
| tmp8); |
| return 1; |
| } |
| |
| msg_cdbg2(" Status register is "); |
| if (tmp32 & (1 << 3)) { |
| msg_cdbg2("volatile and writes to the status register have to " |
| "be enabled with "); |
| if (tmp32 & (1 << 4)) { |
| chip->feature_bits = FEATURE_WRSR_WREN; |
| msg_cdbg2("WREN (0x06).\n"); |
| } else { |
| chip->feature_bits = FEATURE_WRSR_EWSR; |
| msg_cdbg2("EWSR (0x50).\n"); |
| } |
| } else { |
| msg_cdbg2("non-volatile and the standard does not allow " |
| "vendors to tell us whether EWSR/WREN is needed for " |
| "status register writes - assuming EWSR.\n"); |
| chip->feature_bits = FEATURE_WRSR_EWSR; |
| } |
| |
| msg_cdbg2(" Write chunk size is "); |
| if (tmp32 & (1 << 2)) { |
| msg_cdbg2("at least 64 B.\n"); |
| chip->page_size = 64; |
| chip->write = spi_chip_write_256; |
| } else { |
| msg_cdbg2("1 B only.\n"); |
| chip->page_size = 256; |
| chip->write = spi_chip_write_1; |
| } |
| |
| if ((tmp32 & 0x3) == 0x1) { |
| opcode_4k_erase = (tmp32 >> 8) & 0xFF; |
| msg_cspew(" 4kB erase opcode is 0x%02x.\n", opcode_4k_erase); |
| /* add the eraser later, because we don't know total_size yet */ |
| } else |
| msg_cspew(" 4kB erase opcode is not defined.\n"); |
| |
| /* 2. double word */ |
| tmp32 = ((unsigned int)buf[(4 * 1) + 0]); |
| tmp32 |= ((unsigned int)buf[(4 * 1) + 1]) << 8; |
| tmp32 |= ((unsigned int)buf[(4 * 1) + 2]) << 16; |
| tmp32 |= ((unsigned int)buf[(4 * 1) + 3]) << 24; |
| |
| if (tmp32 & (1 << 31)) { |
| msg_cdbg("Flash chip size >= 4 Gb/512 MB not supported.\n"); |
| return 1; |
| } |
| total_size = ((tmp32 & 0x7FFFFFFF) + 1) / 8; |
| chip->total_size = total_size / 1024; |
| msg_cdbg2(" Flash chip size is %d kB.\n", chip->total_size); |
| if (total_size > (1 << 24)) { |
| msg_cdbg("Flash chip size is bigger than what 3-Byte addressing " |
| "can access.\n"); |
| return 1; |
| } |
| |
| if (opcode_4k_erase != 0xFF) |
| sfdp_add_uniform_eraser(chip, opcode_4k_erase, 4 * 1024); |
| |
| /* FIXME: double words 3-7 contain unused fast read information */ |
| |
| if (len == 4 * 4) { |
| msg_cdbg(" It seems like this chip supports the preliminary " |
| "Intel version of SFDP, skipping processing of double " |
| "words 3-9.\n"); |
| goto done; |
| } |
| |
| /* 8. double word */ |
| for (j = 0; j < 4; j++) { |
| /* 7 double words from the start + 2 bytes for every eraser */ |
| tmp8 = buf[(4 * 7) + (j * 2)]; |
| msg_cspew(" Erase Sector Type %d Size: 0x%02x\n", j + 1, |
| tmp8); |
| if (tmp8 == 0) { |
| msg_cspew(" Erase Sector Type %d is unused.\n", j); |
| continue; |
| } |
| if (tmp8 >= 31) { |
| msg_cdbg2(" Block size of erase Sector Type %d (2^%d) " |
| "is too big for flashprog.\n", j, tmp8); |
| continue; |
| } |
| block_size = 1 << (tmp8); /* block_size = 2 ^ field */ |
| |
| tmp8 = buf[(4 * 7) + (j * 2) + 1]; |
| msg_cspew(" Erase Sector Type %d Opcode: 0x%02x\n", j + 1, |
| tmp8); |
| sfdp_add_uniform_eraser(chip, tmp8, block_size); |
| } |
| |
| done: |
| msg_cdbg("done.\n"); |
| return 0; |
| } |
| |
| int probe_spi_sfdp(struct flashctx *flash) |
| { |
| int ret = 0; |
| uint8_t buf[8]; |
| uint32_t tmp32; |
| uint8_t nph; |
| /* need to limit the table loop by comparing i to uint8_t nph hence: */ |
| uint16_t i; |
| struct sfdp_tbl_hdr *hdrs; |
| uint8_t *hbuf; |
| uint8_t *tbuf; |
| |
| if (spi_sfdp_read_sfdp(flash, 0x00, buf, 4)) { |
| msg_cdbg("Receiving SFDP signature failed.\n"); |
| return 0; |
| } |
| tmp32 = buf[0]; |
| tmp32 |= ((unsigned int)buf[1]) << 8; |
| tmp32 |= ((unsigned int)buf[2]) << 16; |
| tmp32 |= ((unsigned int)buf[3]) << 24; |
| |
| if (tmp32 != 0x50444653) { |
| msg_cdbg2("Signature = 0x%08x (should be 0x50444653)\n", tmp32); |
| msg_cdbg("No SFDP signature found.\n"); |
| return 0; |
| } |
| |
| if (spi_sfdp_read_sfdp(flash, 0x04, buf, 3)) { |
| msg_cdbg("Receiving SFDP revision and number of parameter " |
| "headers (NPH) failed. "); |
| return 0; |
| } |
| msg_cdbg2("SFDP revision = %d.%d\n", buf[1], buf[0]); |
| if (buf[1] != 0x01) { |
| msg_cdbg("The chip supports an unknown version of SFDP. " |
| "Aborting SFDP probe!\n"); |
| return 0; |
| } |
| nph = buf[2]; |
| msg_cdbg2("SFDP number of parameter headers is %d (NPH = %d).\n", |
| nph + 1, nph); |
| |
| /* Fetch all parameter headers, even if we don't use them all (yet). */ |
| hbuf = malloc((nph + 1) * 8); |
| hdrs = malloc((nph + 1) * sizeof(*hdrs)); |
| if (hbuf == NULL || hdrs == NULL ) { |
| msg_gerr("Out of memory!\n"); |
| goto cleanup_hdrs; |
| } |
| if (spi_sfdp_read_sfdp(flash, 0x08, hbuf, (nph + 1) * 8)) { |
| msg_cdbg("Receiving SFDP parameter table headers failed.\n"); |
| goto cleanup_hdrs; |
| } |
| |
| for (i = 0; i <= nph; i++) { |
| uint16_t len; |
| hdrs[i].id = hbuf[(8 * i) + 0]; |
| hdrs[i].v_minor = hbuf[(8 * i) + 1]; |
| hdrs[i].v_major = hbuf[(8 * i) + 2]; |
| hdrs[i].len = hbuf[(8 * i) + 3]; |
| hdrs[i].ptp = hbuf[(8 * i) + 4]; |
| hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 5]) << 8; |
| hdrs[i].ptp |= ((unsigned int)hbuf[(8 * i) + 6]) << 16; |
| msg_cdbg2("\nSFDP parameter table header %d/%d:\n", i, nph); |
| msg_cdbg2(" ID 0x%02x, version %d.%d\n", hdrs[i].id, |
| hdrs[i].v_major, hdrs[i].v_minor); |
| len = hdrs[i].len * 4; |
| tmp32 = hdrs[i].ptp; |
| msg_cdbg2(" Length %d B, Parameter Table Pointer 0x%06x\n", |
| len, tmp32); |
| |
| if (tmp32 + len >= (1 << 24)) { |
| msg_cdbg("SFDP Parameter Table %d supposedly overflows " |
| "addressable SFDP area. This most\nprobably " |
| "indicates a corrupt SFDP parameter table " |
| "header. Skipping it.\n", i); |
| continue; |
| } |
| |
| tbuf = malloc(len); |
| if (tbuf == NULL) { |
| msg_gerr("Out of memory!\n"); |
| goto cleanup_hdrs; |
| } |
| if (spi_sfdp_read_sfdp(flash, tmp32, tbuf, len)){ |
| msg_cdbg("Fetching SFDP parameter table %d failed.\n", |
| i); |
| free(tbuf); |
| continue; |
| } |
| msg_cspew(" Parameter table contents:\n"); |
| for (tmp32 = 0; tmp32 < len; tmp32++) { |
| if ((tmp32 % 8) == 0) { |
| msg_cspew(" 0x%04x: ", tmp32); |
| } |
| msg_cspew(" %02x", tbuf[tmp32]); |
| if ((tmp32 % 8) == 7) { |
| msg_cspew("\n"); |
| continue; |
| } |
| if ((tmp32 % 8) == 3) { |
| msg_cspew(" "); |
| continue; |
| } |
| } |
| msg_cspew("\n"); |
| |
| if (i == 0) { /* Mandatory JEDEC SFDP parameter table */ |
| if (hdrs[i].id != 0) |
| msg_cdbg("ID of the mandatory JEDEC SFDP " |
| "parameter table is not 0 as demanded " |
| "by JESD216 (warning only).\n"); |
| |
| if (hdrs[i].v_major != 0x01) { |
| msg_cdbg("The chip contains an unknown " |
| "version of the JEDEC flash " |
| "parameters table, skipping it.\n"); |
| } else if (len != 4 * 4 && len < 9 * 4) { |
| msg_cdbg("Length of the mandatory JEDEC SFDP " |
| "parameter table is wrong (%d B), " |
| "skipping it.\n", len); |
| } else if (sfdp_fill_flash(flash->chip, tbuf, len) == 0) |
| ret = 1; |
| } |
| free(tbuf); |
| } |
| |
| cleanup_hdrs: |
| free(hdrs); |
| free(hbuf); |
| return ret; |
| } |