blob: 722ad1470c79a5910fa68ec703a45221693ba64e [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2009,2010 Carl-Daniel Hailfinger
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Driver for the SPIPGM hardware by "RayeR" Martin Rehak.
* See http://rayer.ic.cz/elektro/spipgm.htm for schematics and instructions.
*/
/* This driver uses non-portable direct I/O port accesses which won't work on
* any non-x86 platform, and even on x86 there is a high chance there will be
* collisions with any loaded parallel port drivers.
* The big advantage of direct port I/O is OS independence and speed because
* most OS parport drivers will perform many unnecessary accesses although
* this driver just treats the parallel port as a GPIO set.
*/
#if defined(__i386__) || defined(__x86_64__)
#include "flash.h"
#include "programmer.h"
/* We have two sets of pins, out and in. The numbers for both sets are
* independent and are bitshift values, not real pin numbers.
*/
/* Pins for master->slave direction */
#define SPI_CS_PIN 5
#define SPI_SCK_PIN 6
#define SPI_MOSI_PIN 7
/* Pins for slave->master direction */
#define SPI_MISO_PIN 6
static int lpt_iobase;
/* FIXME: All rayer_bitbang_set_* functions could use caching of the value
* stored at port lpt_iobase to avoid unnecessary INB. In theory, only one
* INB(lpt_iobase) would be needed on programmer init to get the initial
* value.
*/
void rayer_bitbang_set_cs(int val)
{
uint8_t tmp;
tmp = INB(lpt_iobase);
tmp &= ~(1 << SPI_CS_PIN);
tmp |= (val << SPI_CS_PIN);
OUTB(tmp, lpt_iobase);
}
void rayer_bitbang_set_sck(int val)
{
uint8_t tmp;
tmp = INB(lpt_iobase);
tmp &= ~(1 << SPI_SCK_PIN);
tmp |= (val << SPI_SCK_PIN);
OUTB(tmp, lpt_iobase);
}
void rayer_bitbang_set_mosi(int val)
{
uint8_t tmp;
tmp = INB(lpt_iobase);
tmp &= ~(1 << SPI_MOSI_PIN);
tmp |= (val << SPI_MOSI_PIN);
OUTB(tmp, lpt_iobase);
}
int rayer_bitbang_get_miso(void)
{
uint8_t tmp;
tmp = INB(lpt_iobase + 1);
tmp = (tmp >> SPI_MISO_PIN) & 0x1;
return tmp;
}
static const struct bitbang_spi_master bitbang_spi_master_rayer = {
.type = BITBANG_SPI_MASTER_RAYER,
.set_cs = rayer_bitbang_set_cs,
.set_sck = rayer_bitbang_set_sck,
.set_mosi = rayer_bitbang_set_mosi,
.get_miso = rayer_bitbang_get_miso,
};
int rayer_spi_init(void)
{
/* Pick a default value for now. */
lpt_iobase = 0x378;
msg_pdbg("Using port 0x%x as I/O base for parallel port access.\n",
lpt_iobase);
get_io_perms();
/* 1 usec halfperiod delay for now. */
if (bitbang_spi_init(&bitbang_spi_master_rayer, 1))
return 1;
buses_supported = CHIP_BUSTYPE_SPI;
spi_controller = SPI_CONTROLLER_RAYER;
return 0;
}
#else
#error PCI port I/O access is not supported on this architecture yet.
#endif