| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2009,2010 Carl-Daniel Hailfinger |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <string.h> |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <ctype.h> |
| #include <errno.h> |
| #include "flash.h" |
| #include "chipdrivers.h" |
| #include "programmer.h" |
| |
| #include "spi.h" |
| |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| |
| enum emu_chip { |
| EMULATE_NONE, |
| EMULATE_ST_M25P10_RES, |
| EMULATE_SST_SST25VF040_REMS, |
| EMULATE_SST_SST25VF032B, |
| EMULATE_MACRONIX_MX25L6436, |
| EMULATE_WINBOND_W25Q128FV, |
| }; |
| |
| struct emu_data { |
| enum emu_chip emu_chip; |
| char *emu_persistent_image; |
| unsigned int emu_chip_size; |
| int emu_modified; /* is the image modified since reading it? */ |
| uint8_t emu_status; |
| unsigned int emu_max_byteprogram_size; |
| unsigned int emu_max_aai_size; |
| unsigned int emu_jedec_se_size; |
| unsigned int emu_jedec_be_52_size; |
| unsigned int emu_jedec_be_d8_size; |
| unsigned int emu_jedec_ce_60_size; |
| unsigned int emu_jedec_ce_c7_size; |
| unsigned char spi_blacklist[256]; |
| unsigned char spi_ignorelist[256]; |
| unsigned int spi_blacklist_size; |
| unsigned int spi_ignorelist_size; |
| |
| uint8_t *flashchip_contents; |
| }; |
| |
| /* A legit complete SFDP table based on the MX25L6436E (rev. 1.8) datasheet. */ |
| static const uint8_t sfdp_table[] = { |
| 0x53, 0x46, 0x44, 0x50, // @0x00: SFDP signature |
| 0x00, 0x01, 0x01, 0xFF, // @0x04: revision 1.0, 2 headers |
| 0x00, 0x00, 0x01, 0x09, // @0x08: JEDEC SFDP header rev. 1.0, 9 DW long |
| 0x1C, 0x00, 0x00, 0xFF, // @0x0C: PTP0 = 0x1C (instead of 0x30) |
| 0xC2, 0x00, 0x01, 0x04, // @0x10: Macronix header rev. 1.0, 4 DW long |
| 0x48, 0x00, 0x00, 0xFF, // @0x14: PTP1 = 0x48 (instead of 0x60) |
| 0xFF, 0xFF, 0xFF, 0xFF, // @0x18: hole. |
| 0xE5, 0x20, 0xC9, 0xFF, // @0x1C: SFDP parameter table start |
| 0xFF, 0xFF, 0xFF, 0x03, // @0x20 |
| 0x00, 0xFF, 0x08, 0x6B, // @0x24 |
| 0x08, 0x3B, 0x00, 0xFF, // @0x28 |
| 0xEE, 0xFF, 0xFF, 0xFF, // @0x2C |
| 0xFF, 0xFF, 0x00, 0x00, // @0x30 |
| 0xFF, 0xFF, 0x00, 0xFF, // @0x34 |
| 0x0C, 0x20, 0x0F, 0x52, // @0x38 |
| 0x10, 0xD8, 0x00, 0xFF, // @0x3C: SFDP parameter table end |
| 0xFF, 0xFF, 0xFF, 0xFF, // @0x40: hole. |
| 0xFF, 0xFF, 0xFF, 0xFF, // @0x44: hole. |
| 0x00, 0x36, 0x00, 0x27, // @0x48: Macronix parameter table start |
| 0xF4, 0x4F, 0xFF, 0xFF, // @0x4C |
| 0xD9, 0xC8, 0xFF, 0xFF, // @0x50 |
| 0xFF, 0xFF, 0xFF, 0xFF, // @0x54: Macronix parameter table end |
| }; |
| |
| |
| static unsigned int spi_write_256_chunksize = 256; |
| |
| static int dummy_spi_send_command(const struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, |
| const unsigned char *writearr, unsigned char *readarr); |
| static int dummy_spi_write_256(struct flashctx *flash, const uint8_t *buf, |
| unsigned int start, unsigned int len); |
| static void dummy_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr); |
| static void dummy_chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr); |
| static void dummy_chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr); |
| static void dummy_chip_writen(const struct flashctx *flash, const uint8_t *buf, chipaddr addr, size_t len); |
| static uint8_t dummy_chip_readb(const struct flashctx *flash, const chipaddr addr); |
| static uint16_t dummy_chip_readw(const struct flashctx *flash, const chipaddr addr); |
| static uint32_t dummy_chip_readl(const struct flashctx *flash, const chipaddr addr); |
| static void dummy_chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len); |
| |
| static struct spi_master spi_master_dummyflasher = { |
| .features = SPI_MASTER_4BA, |
| .max_data_read = MAX_DATA_READ_UNLIMITED, |
| .max_data_write = MAX_DATA_UNSPECIFIED, |
| .command = dummy_spi_send_command, |
| .multicommand = default_spi_send_multicommand, |
| .read = default_spi_read, |
| .write_256 = dummy_spi_write_256, |
| .write_aai = default_spi_write_aai, |
| }; |
| |
| static struct par_master par_master_dummy = { |
| .chip_readb = dummy_chip_readb, |
| .chip_readw = dummy_chip_readw, |
| .chip_readl = dummy_chip_readl, |
| .chip_readn = dummy_chip_readn, |
| .chip_writeb = dummy_chip_writeb, |
| .chip_writew = dummy_chip_writew, |
| .chip_writel = dummy_chip_writel, |
| .chip_writen = dummy_chip_writen, |
| }; |
| |
| static int dummy_shutdown(void *data) |
| { |
| msg_pspew("%s\n", __func__); |
| struct emu_data *emu_data = (struct emu_data *)data; |
| if (emu_data->emu_chip != EMULATE_NONE) { |
| if (emu_data->emu_persistent_image && emu_data->emu_modified) { |
| msg_pdbg("Writing %s\n", emu_data->emu_persistent_image); |
| write_buf_to_file(emu_data->flashchip_contents, |
| emu_data->emu_chip_size, |
| emu_data->emu_persistent_image); |
| } |
| free(emu_data->emu_persistent_image); |
| free(emu_data->flashchip_contents); |
| } |
| free(data); |
| return 0; |
| } |
| |
| static int init_data(struct emu_data *data, enum chipbustype *dummy_buses_supported) |
| { |
| char *bustext = NULL; |
| char *tmp = NULL; |
| unsigned int i; |
| char *endptr; |
| char *status = NULL; |
| |
| bustext = extract_programmer_param("bus"); |
| msg_pdbg("Requested buses are: %s\n", bustext ? bustext : "default"); |
| if (!bustext) |
| bustext = strdup("parallel+lpc+fwh+spi"); |
| /* Convert the parameters to lowercase. */ |
| tolower_string(bustext); |
| |
| *dummy_buses_supported = BUS_NONE; |
| if (strstr(bustext, "parallel")) { |
| *dummy_buses_supported |= BUS_PARALLEL; |
| msg_pdbg("Enabling support for %s flash.\n", "parallel"); |
| } |
| if (strstr(bustext, "lpc")) { |
| *dummy_buses_supported |= BUS_LPC; |
| msg_pdbg("Enabling support for %s flash.\n", "LPC"); |
| } |
| if (strstr(bustext, "fwh")) { |
| *dummy_buses_supported |= BUS_FWH; |
| msg_pdbg("Enabling support for %s flash.\n", "FWH"); |
| } |
| if (strstr(bustext, "spi")) { |
| *dummy_buses_supported |= BUS_SPI; |
| msg_pdbg("Enabling support for %s flash.\n", "SPI"); |
| } |
| if (*dummy_buses_supported == BUS_NONE) |
| msg_pdbg("Support for all flash bus types disabled.\n"); |
| free(bustext); |
| |
| tmp = extract_programmer_param("spi_write_256_chunksize"); |
| if (tmp) { |
| spi_write_256_chunksize = strtoul(tmp, &endptr, 0); |
| if (*endptr != '\0' || spi_write_256_chunksize < 1) { |
| msg_perr("invalid spi_write_256_chunksize\n"); |
| free(tmp); |
| return 1; |
| } |
| free(tmp); |
| } |
| |
| tmp = extract_programmer_param("spi_blacklist"); |
| if (tmp) { |
| i = strlen(tmp); |
| if (!strncmp(tmp, "0x", 2)) { |
| i -= 2; |
| memmove(tmp, tmp + 2, i + 1); |
| } |
| if ((i > 512) || (i % 2)) { |
| msg_perr("Invalid SPI command blacklist length\n"); |
| free(tmp); |
| return 1; |
| } |
| data->spi_blacklist_size = i / 2; |
| for (i = 0; i < data->spi_blacklist_size * 2; i++) { |
| if (!isxdigit((unsigned char)tmp[i])) { |
| msg_perr("Invalid char \"%c\" in SPI command " |
| "blacklist\n", tmp[i]); |
| free(tmp); |
| return 1; |
| } |
| } |
| for (i = 0; i < data->spi_blacklist_size; i++) { |
| unsigned int tmp2; |
| /* SCNx8 is apparently not supported by MSVC (and thus |
| * MinGW), so work around it with an extra variable |
| */ |
| sscanf(tmp + i * 2, "%2x", &tmp2); |
| data->spi_blacklist[i] = (uint8_t)tmp2; |
| } |
| msg_pdbg("SPI blacklist is "); |
| for (i = 0; i < data->spi_blacklist_size; i++) |
| msg_pdbg("%02x ", data->spi_blacklist[i]); |
| msg_pdbg(", size %u\n", data->spi_blacklist_size); |
| } |
| free(tmp); |
| |
| tmp = extract_programmer_param("spi_ignorelist"); |
| if (tmp) { |
| i = strlen(tmp); |
| if (!strncmp(tmp, "0x", 2)) { |
| i -= 2; |
| memmove(tmp, tmp + 2, i + 1); |
| } |
| if ((i > 512) || (i % 2)) { |
| msg_perr("Invalid SPI command ignorelist length\n"); |
| free(tmp); |
| return 1; |
| } |
| data->spi_ignorelist_size = i / 2; |
| for (i = 0; i < data->spi_ignorelist_size * 2; i++) { |
| if (!isxdigit((unsigned char)tmp[i])) { |
| msg_perr("Invalid char \"%c\" in SPI command " |
| "ignorelist\n", tmp[i]); |
| free(tmp); |
| return 1; |
| } |
| } |
| for (i = 0; i < data->spi_ignorelist_size; i++) { |
| unsigned int tmp2; |
| /* SCNx8 is apparently not supported by MSVC (and thus |
| * MinGW), so work around it with an extra variable |
| */ |
| sscanf(tmp + i * 2, "%2x", &tmp2); |
| data->spi_ignorelist[i] = (uint8_t)tmp2; |
| } |
| msg_pdbg("SPI ignorelist is "); |
| for (i = 0; i < data->spi_ignorelist_size; i++) |
| msg_pdbg("%02x ", data->spi_ignorelist[i]); |
| msg_pdbg(", size %u\n", data->spi_ignorelist_size); |
| } |
| free(tmp); |
| |
| tmp = extract_programmer_param("emulate"); |
| if (!tmp) { |
| msg_pdbg("Not emulating any flash chip.\n"); |
| /* Nothing else to do. */ |
| return 0; |
| } |
| |
| if (!strcmp(tmp, "M25P10.RES")) { |
| data->emu_chip = EMULATE_ST_M25P10_RES; |
| data->emu_chip_size = 128 * 1024; |
| data->emu_max_byteprogram_size = 128; |
| data->emu_max_aai_size = 0; |
| data->emu_jedec_se_size = 0; |
| data->emu_jedec_be_52_size = 0; |
| data->emu_jedec_be_d8_size = 32 * 1024; |
| data->emu_jedec_ce_60_size = 0; |
| data->emu_jedec_ce_c7_size = data->emu_chip_size; |
| msg_pdbg("Emulating ST M25P10.RES SPI flash chip (RES, page " |
| "write)\n"); |
| } |
| if (!strcmp(tmp, "SST25VF040.REMS")) { |
| data->emu_chip = EMULATE_SST_SST25VF040_REMS; |
| data->emu_chip_size = 512 * 1024; |
| data->emu_max_byteprogram_size = 1; |
| data->emu_max_aai_size = 0; |
| data->emu_jedec_se_size = 4 * 1024; |
| data->emu_jedec_be_52_size = 32 * 1024; |
| data->emu_jedec_be_d8_size = 0; |
| data->emu_jedec_ce_60_size = data->emu_chip_size; |
| data->emu_jedec_ce_c7_size = 0; |
| msg_pdbg("Emulating SST SST25VF040.REMS SPI flash chip (REMS, " |
| "byte write)\n"); |
| } |
| if (!strcmp(tmp, "SST25VF032B")) { |
| data->emu_chip = EMULATE_SST_SST25VF032B; |
| data->emu_chip_size = 4 * 1024 * 1024; |
| data->emu_max_byteprogram_size = 1; |
| data->emu_max_aai_size = 2; |
| data->emu_jedec_se_size = 4 * 1024; |
| data->emu_jedec_be_52_size = 32 * 1024; |
| data->emu_jedec_be_d8_size = 64 * 1024; |
| data->emu_jedec_ce_60_size = data->emu_chip_size; |
| data->emu_jedec_ce_c7_size = data->emu_chip_size; |
| msg_pdbg("Emulating SST SST25VF032B SPI flash chip (RDID, AAI " |
| "write)\n"); |
| } |
| if (!strcmp(tmp, "MX25L6436")) { |
| data->emu_chip = EMULATE_MACRONIX_MX25L6436; |
| data->emu_chip_size = 8 * 1024 * 1024; |
| data->emu_max_byteprogram_size = 256; |
| data->emu_max_aai_size = 0; |
| data->emu_jedec_se_size = 4 * 1024; |
| data->emu_jedec_be_52_size = 32 * 1024; |
| data->emu_jedec_be_d8_size = 64 * 1024; |
| data->emu_jedec_ce_60_size = data->emu_chip_size; |
| data->emu_jedec_ce_c7_size = data->emu_chip_size; |
| msg_pdbg("Emulating Macronix MX25L6436 SPI flash chip (RDID, " |
| "SFDP)\n"); |
| } |
| if (!strcmp(tmp, "W25Q128FV")) { |
| data->emu_chip = EMULATE_WINBOND_W25Q128FV; |
| data->emu_chip_size = 16 * 1024 * 1024; |
| data->emu_max_byteprogram_size = 256; |
| data->emu_max_aai_size = 0; |
| data->emu_jedec_se_size = 4 * 1024; |
| data->emu_jedec_be_52_size = 32 * 1024; |
| data->emu_jedec_be_d8_size = 64 * 1024; |
| data->emu_jedec_ce_60_size = data->emu_chip_size; |
| data->emu_jedec_ce_c7_size = data->emu_chip_size; |
| msg_pdbg("Emulating Winbond W25Q128FV SPI flash chip (RDID)\n"); |
| } |
| if (data->emu_chip == EMULATE_NONE) { |
| msg_perr("Invalid chip specified for emulation: %s\n", tmp); |
| free(tmp); |
| return 1; |
| } |
| free(tmp); |
| |
| status = extract_programmer_param("spi_status"); |
| if (status) { |
| errno = 0; |
| data->emu_status = strtoul(status, &endptr, 0); |
| if (errno != 0 || status == endptr) { |
| free(status); |
| msg_perr("Error: initial status register specified, " |
| "but the value could not be converted.\n"); |
| return 1; |
| } |
| free(status); |
| msg_pdbg("Initial status register is set to 0x%02x.\n", |
| data->emu_status); |
| } |
| |
| data->flashchip_contents = malloc(data->emu_chip_size); |
| if (!data->flashchip_contents) { |
| msg_perr("Out of memory!\n"); |
| return 1; |
| } |
| |
| |
| return 0; |
| } |
| |
| static int dummy_init(void) |
| { |
| struct stat image_stat; |
| |
| struct emu_data *data = calloc(1, sizeof(struct emu_data)); |
| if (!data) { |
| msg_perr("Out of memory!\n"); |
| return 1; |
| } |
| data->emu_chip = EMULATE_NONE; |
| spi_master_dummyflasher.data = data; |
| par_master_dummy.data = data; |
| |
| msg_pspew("%s\n", __func__); |
| |
| enum chipbustype dummy_buses_supported; |
| if (init_data(data, &dummy_buses_supported)) { |
| free(data); |
| return 1; |
| } |
| |
| if (data->emu_chip == EMULATE_NONE) { |
| msg_pdbg("Not emulating any flash chip.\n"); |
| /* Nothing else to do. */ |
| goto dummy_init_out; |
| } |
| |
| msg_pdbg("Filling fake flash chip with 0xff, size %i\n", data->emu_chip_size); |
| memset(data->flashchip_contents, 0xff, data->emu_chip_size); |
| |
| /* Will be freed by shutdown function if necessary. */ |
| data->emu_persistent_image = extract_programmer_param("image"); |
| if (!data->emu_persistent_image) { |
| /* Nothing else to do. */ |
| goto dummy_init_out; |
| } |
| /* We will silently (in default verbosity) ignore the file if it does not exist (yet) or the size does |
| * not match the emulated chip. */ |
| if (!stat(data->emu_persistent_image, &image_stat)) { |
| msg_pdbg("Found persistent image %s, %jd B ", |
| data->emu_persistent_image, (intmax_t)image_stat.st_size); |
| if ((uintmax_t)image_stat.st_size == data->emu_chip_size) { |
| msg_pdbg("matches.\n"); |
| msg_pdbg("Reading %s\n", data->emu_persistent_image); |
| if (read_buf_from_file(data->flashchip_contents, data->emu_chip_size, |
| data->emu_persistent_image)) { |
| msg_perr("Unable to read %s\n", data->emu_persistent_image); |
| free(data->emu_persistent_image); |
| free(data->flashchip_contents); |
| free(data); |
| return 1; |
| } |
| } else { |
| msg_pdbg("doesn't match.\n"); |
| } |
| } |
| |
| dummy_init_out: |
| if (register_shutdown(dummy_shutdown, data)) { |
| free(data->emu_persistent_image); |
| free(data->flashchip_contents); |
| free(data); |
| return 1; |
| } |
| if (dummy_buses_supported & BUS_NONSPI) |
| register_par_master(&par_master_dummy, |
| dummy_buses_supported & BUS_NONSPI); |
| if (dummy_buses_supported & BUS_SPI) |
| register_spi_master(&spi_master_dummyflasher); |
| |
| return 0; |
| } |
| |
| static void *dummy_map(const char *descr, uintptr_t phys_addr, size_t len) |
| { |
| msg_pspew("%s: Mapping %s, 0x%zx bytes at 0x%0*" PRIxPTR "\n", |
| __func__, descr, len, PRIxPTR_WIDTH, phys_addr); |
| return (void *)phys_addr; |
| } |
| |
| static void dummy_unmap(void *virt_addr, size_t len) |
| { |
| msg_pspew("%s: Unmapping 0x%zx bytes at %p\n", __func__, len, virt_addr); |
| } |
| |
| static void dummy_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) |
| { |
| msg_pspew("%s: addr=0x%" PRIxPTR ", val=0x%02x\n", __func__, addr, val); |
| } |
| |
| static void dummy_chip_writew(const struct flashctx *flash, uint16_t val, chipaddr addr) |
| { |
| msg_pspew("%s: addr=0x%" PRIxPTR ", val=0x%04x\n", __func__, addr, val); |
| } |
| |
| static void dummy_chip_writel(const struct flashctx *flash, uint32_t val, chipaddr addr) |
| { |
| msg_pspew("%s: addr=0x%" PRIxPTR ", val=0x%08x\n", __func__, addr, val); |
| } |
| |
| static void dummy_chip_writen(const struct flashctx *flash, const uint8_t *buf, chipaddr addr, size_t len) |
| { |
| size_t i; |
| msg_pspew("%s: addr=0x%" PRIxPTR ", len=0x%zx, writing data (hex):", __func__, addr, len); |
| for (i = 0; i < len; i++) { |
| if ((i % 16) == 0) |
| msg_pspew("\n"); |
| msg_pspew("%02x ", buf[i]); |
| } |
| } |
| |
| static uint8_t dummy_chip_readb(const struct flashctx *flash, const chipaddr addr) |
| { |
| msg_pspew("%s: addr=0x%" PRIxPTR ", returning 0xff\n", __func__, addr); |
| return 0xff; |
| } |
| |
| static uint16_t dummy_chip_readw(const struct flashctx *flash, const chipaddr addr) |
| { |
| msg_pspew("%s: addr=0x%" PRIxPTR ", returning 0xffff\n", __func__, addr); |
| return 0xffff; |
| } |
| |
| static uint32_t dummy_chip_readl(const struct flashctx *flash, const chipaddr addr) |
| { |
| msg_pspew("%s: addr=0x%" PRIxPTR ", returning 0xffffffff\n", __func__, addr); |
| return 0xffffffff; |
| } |
| |
| static void dummy_chip_readn(const struct flashctx *flash, uint8_t *buf, const chipaddr addr, size_t len) |
| { |
| msg_pspew("%s: addr=0x%" PRIxPTR ", len=0x%zx, returning array of 0xff\n", __func__, addr, len); |
| memset(buf, 0xff, len); |
| return; |
| } |
| |
| static int emulate_spi_chip_response(unsigned int writecnt, |
| unsigned int readcnt, |
| const unsigned char *writearr, |
| unsigned char *readarr, |
| struct emu_data *data) |
| { |
| unsigned int offs, i, toread; |
| static int unsigned aai_offs; |
| const unsigned char sst25vf040_rems_response[2] = {0xbf, 0x44}; |
| const unsigned char sst25vf032b_rems_response[2] = {0xbf, 0x4a}; |
| const unsigned char mx25l6436_rems_response[2] = {0xc2, 0x16}; |
| const unsigned char w25q128fv_rems_response[2] = {0xef, 0x17}; |
| |
| if (writecnt == 0) { |
| msg_perr("No command sent to the chip!\n"); |
| return 1; |
| } |
| /* spi_blacklist has precedence over spi_ignorelist. */ |
| for (i = 0; i < data->spi_blacklist_size; i++) { |
| if (writearr[0] == data->spi_blacklist[i]) { |
| msg_pdbg("Refusing blacklisted SPI command 0x%02x\n", |
| data->spi_blacklist[i]); |
| return SPI_INVALID_OPCODE; |
| } |
| } |
| for (i = 0; i < data->spi_ignorelist_size; i++) { |
| if (writearr[0] == data->spi_ignorelist[i]) { |
| msg_cdbg("Ignoring ignorelisted SPI command 0x%02x\n", |
| data->spi_ignorelist[i]); |
| /* Return success because the command does not fail, |
| * it is simply ignored. |
| */ |
| return 0; |
| } |
| } |
| |
| if (data->emu_max_aai_size && (data->emu_status & SPI_SR_AAI)) { |
| if (writearr[0] != JEDEC_AAI_WORD_PROGRAM && |
| writearr[0] != JEDEC_WRDI && |
| writearr[0] != JEDEC_RDSR) { |
| msg_perr("Forbidden opcode (0x%02x) attempted during " |
| "AAI sequence!\n", writearr[0]); |
| return 0; |
| } |
| } |
| |
| switch (writearr[0]) { |
| case JEDEC_RES: |
| if (writecnt < JEDEC_RES_OUTSIZE) |
| break; |
| /* offs calculation is only needed for SST chips which treat RES like REMS. */ |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| offs += writecnt - JEDEC_REMS_OUTSIZE; |
| switch (data->emu_chip) { |
| case EMULATE_ST_M25P10_RES: |
| if (readcnt > 0) |
| memset(readarr, 0x10, readcnt); |
| break; |
| case EMULATE_SST_SST25VF040_REMS: |
| for (i = 0; i < readcnt; i++) |
| readarr[i] = sst25vf040_rems_response[(offs + i) % 2]; |
| break; |
| case EMULATE_SST_SST25VF032B: |
| for (i = 0; i < readcnt; i++) |
| readarr[i] = sst25vf032b_rems_response[(offs + i) % 2]; |
| break; |
| case EMULATE_MACRONIX_MX25L6436: |
| if (readcnt > 0) |
| memset(readarr, 0x16, readcnt); |
| break; |
| case EMULATE_WINBOND_W25Q128FV: |
| if (readcnt > 0) |
| memset(readarr, 0x17, readcnt); |
| break; |
| default: /* ignore */ |
| break; |
| } |
| break; |
| case JEDEC_REMS: |
| /* REMS response has wraparound and uses an address parameter. */ |
| if (writecnt < JEDEC_REMS_OUTSIZE) |
| break; |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| offs += writecnt - JEDEC_REMS_OUTSIZE; |
| switch (data->emu_chip) { |
| case EMULATE_SST_SST25VF040_REMS: |
| for (i = 0; i < readcnt; i++) |
| readarr[i] = sst25vf040_rems_response[(offs + i) % 2]; |
| break; |
| case EMULATE_SST_SST25VF032B: |
| for (i = 0; i < readcnt; i++) |
| readarr[i] = sst25vf032b_rems_response[(offs + i) % 2]; |
| break; |
| case EMULATE_MACRONIX_MX25L6436: |
| for (i = 0; i < readcnt; i++) |
| readarr[i] = mx25l6436_rems_response[(offs + i) % 2]; |
| break; |
| case EMULATE_WINBOND_W25Q128FV: |
| for (i = 0; i < readcnt; i++) |
| readarr[i] = w25q128fv_rems_response[(offs + i) % 2]; |
| break; |
| default: /* ignore */ |
| break; |
| } |
| break; |
| case JEDEC_RDID: |
| switch (data->emu_chip) { |
| case EMULATE_SST_SST25VF032B: |
| if (readcnt > 0) |
| readarr[0] = 0xbf; |
| if (readcnt > 1) |
| readarr[1] = 0x25; |
| if (readcnt > 2) |
| readarr[2] = 0x4a; |
| break; |
| case EMULATE_MACRONIX_MX25L6436: |
| if (readcnt > 0) |
| readarr[0] = 0xc2; |
| if (readcnt > 1) |
| readarr[1] = 0x20; |
| if (readcnt > 2) |
| readarr[2] = 0x17; |
| break; |
| case EMULATE_WINBOND_W25Q128FV: |
| if (readcnt > 0) |
| readarr[0] = 0xef; |
| if (readcnt > 1) |
| readarr[1] = 0x40; |
| if (readcnt > 2) |
| readarr[2] = 0x18; |
| break; |
| default: /* ignore */ |
| break; |
| } |
| break; |
| case JEDEC_RDSR: |
| memset(readarr, data->emu_status, readcnt); |
| break; |
| /* FIXME: this should be chip-specific. */ |
| case JEDEC_EWSR: |
| case JEDEC_WREN: |
| data->emu_status |= SPI_SR_WEL; |
| break; |
| case JEDEC_WRSR: |
| if (!(data->emu_status & SPI_SR_WEL)) { |
| msg_perr("WRSR attempted, but WEL is 0!\n"); |
| break; |
| } |
| /* FIXME: add some reasonable simulation of the busy flag */ |
| data->emu_status = writearr[1] & ~SPI_SR_WIP; |
| msg_pdbg2("WRSR wrote 0x%02x.\n", data->emu_status); |
| break; |
| case JEDEC_READ: |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| /* Truncate to emu_chip_size. */ |
| offs %= data->emu_chip_size; |
| if (readcnt > 0) |
| memcpy(readarr, data->flashchip_contents + offs, readcnt); |
| break; |
| case JEDEC_BYTE_PROGRAM: |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| /* Truncate to emu_chip_size. */ |
| offs %= data->emu_chip_size; |
| if (writecnt < 5) { |
| msg_perr("BYTE PROGRAM size too short!\n"); |
| return 1; |
| } |
| if (writecnt - 4 > data->emu_max_byteprogram_size) { |
| msg_perr("Max BYTE PROGRAM size exceeded!\n"); |
| return 1; |
| } |
| memcpy(data->flashchip_contents + offs, writearr + 4, writecnt - 4); |
| data->emu_modified = 1; |
| break; |
| case JEDEC_AAI_WORD_PROGRAM: |
| if (!data->emu_max_aai_size) |
| break; |
| if (!(data->emu_status & SPI_SR_AAI)) { |
| if (writecnt < JEDEC_AAI_WORD_PROGRAM_OUTSIZE) { |
| msg_perr("Initial AAI WORD PROGRAM size too " |
| "short!\n"); |
| return 1; |
| } |
| if (writecnt > JEDEC_AAI_WORD_PROGRAM_OUTSIZE) { |
| msg_perr("Initial AAI WORD PROGRAM size too " |
| "long!\n"); |
| return 1; |
| } |
| data->emu_status |= SPI_SR_AAI; |
| aai_offs = writearr[1] << 16 | writearr[2] << 8 | |
| writearr[3]; |
| /* Truncate to emu_chip_size. */ |
| aai_offs %= data->emu_chip_size; |
| memcpy(data->flashchip_contents + aai_offs, writearr + 4, 2); |
| aai_offs += 2; |
| } else { |
| if (writecnt < JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE) { |
| msg_perr("Continuation AAI WORD PROGRAM size " |
| "too short!\n"); |
| return 1; |
| } |
| if (writecnt > JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE) { |
| msg_perr("Continuation AAI WORD PROGRAM size " |
| "too long!\n"); |
| return 1; |
| } |
| memcpy(data->flashchip_contents + aai_offs, writearr + 1, 2); |
| aai_offs += 2; |
| } |
| data->emu_modified = 1; |
| break; |
| case JEDEC_WRDI: |
| if (data->emu_max_aai_size) |
| data->emu_status &= ~SPI_SR_AAI; |
| break; |
| case JEDEC_SE: |
| if (!data->emu_jedec_se_size) |
| break; |
| if (writecnt != JEDEC_SE_OUTSIZE) { |
| msg_perr("SECTOR ERASE 0x20 outsize invalid!\n"); |
| return 1; |
| } |
| if (readcnt != JEDEC_SE_INSIZE) { |
| msg_perr("SECTOR ERASE 0x20 insize invalid!\n"); |
| return 1; |
| } |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| if (offs & (data->emu_jedec_se_size - 1)) |
| msg_pdbg("Unaligned SECTOR ERASE 0x20: 0x%x\n", offs); |
| offs &= ~(data->emu_jedec_se_size - 1); |
| memset(data->flashchip_contents + offs, 0xff, data->emu_jedec_se_size); |
| data->emu_modified = 1; |
| break; |
| case JEDEC_BE_52: |
| if (!data->emu_jedec_be_52_size) |
| break; |
| if (writecnt != JEDEC_BE_52_OUTSIZE) { |
| msg_perr("BLOCK ERASE 0x52 outsize invalid!\n"); |
| return 1; |
| } |
| if (readcnt != JEDEC_BE_52_INSIZE) { |
| msg_perr("BLOCK ERASE 0x52 insize invalid!\n"); |
| return 1; |
| } |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| if (offs & (data->emu_jedec_be_52_size - 1)) |
| msg_pdbg("Unaligned BLOCK ERASE 0x52: 0x%x\n", offs); |
| offs &= ~(data->emu_jedec_be_52_size - 1); |
| memset(data->flashchip_contents + offs, 0xff, data->emu_jedec_be_52_size); |
| data->emu_modified = 1; |
| break; |
| case JEDEC_BE_D8: |
| if (!data->emu_jedec_be_d8_size) |
| break; |
| if (writecnt != JEDEC_BE_D8_OUTSIZE) { |
| msg_perr("BLOCK ERASE 0xd8 outsize invalid!\n"); |
| return 1; |
| } |
| if (readcnt != JEDEC_BE_D8_INSIZE) { |
| msg_perr("BLOCK ERASE 0xd8 insize invalid!\n"); |
| return 1; |
| } |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| if (offs & (data->emu_jedec_be_d8_size - 1)) |
| msg_pdbg("Unaligned BLOCK ERASE 0xd8: 0x%x\n", offs); |
| offs &= ~(data->emu_jedec_be_d8_size - 1); |
| memset(data->flashchip_contents + offs, 0xff, data->emu_jedec_be_d8_size); |
| data->emu_modified = 1; |
| break; |
| case JEDEC_CE_60: |
| if (!data->emu_jedec_ce_60_size) |
| break; |
| if (writecnt != JEDEC_CE_60_OUTSIZE) { |
| msg_perr("CHIP ERASE 0x60 outsize invalid!\n"); |
| return 1; |
| } |
| if (readcnt != JEDEC_CE_60_INSIZE) { |
| msg_perr("CHIP ERASE 0x60 insize invalid!\n"); |
| return 1; |
| } |
| /* JEDEC_CE_60_OUTSIZE is 1 (no address) -> no offset. */ |
| /* emu_jedec_ce_60_size is emu_chip_size. */ |
| memset(data->flashchip_contents, 0xff, data->emu_jedec_ce_60_size); |
| data->emu_modified = 1; |
| break; |
| case JEDEC_CE_C7: |
| if (!data->emu_jedec_ce_c7_size) |
| break; |
| if (writecnt != JEDEC_CE_C7_OUTSIZE) { |
| msg_perr("CHIP ERASE 0xc7 outsize invalid!\n"); |
| return 1; |
| } |
| if (readcnt != JEDEC_CE_C7_INSIZE) { |
| msg_perr("CHIP ERASE 0xc7 insize invalid!\n"); |
| return 1; |
| } |
| /* JEDEC_CE_C7_OUTSIZE is 1 (no address) -> no offset. */ |
| /* emu_jedec_ce_c7_size is emu_chip_size. */ |
| memset(data->flashchip_contents, 0xff, data->emu_jedec_ce_c7_size); |
| data->emu_modified = 1; |
| break; |
| case JEDEC_SFDP: |
| if (data->emu_chip != EMULATE_MACRONIX_MX25L6436) |
| break; |
| if (writecnt < 4) |
| break; |
| offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; |
| |
| /* SFDP expects one dummy byte after the address. */ |
| if (writecnt == 4) { |
| /* The dummy byte was not written, make sure it is read instead. |
| * Shifting and shortening the read array does achieve this goal. |
| */ |
| readarr++; |
| readcnt--; |
| } else { |
| /* The response is shifted if more than 5 bytes are written, because SFDP data is |
| * already shifted out by the chip while those superfluous bytes are written. */ |
| offs += writecnt - 5; |
| } |
| |
| /* The SFDP spec implies that the start address of an SFDP read may be truncated to fit in the |
| * SFDP table address space, i.e. the start address may be wrapped around at SFDP table size. |
| * This is a reasonable implementation choice in hardware because it saves a few gates. */ |
| if (offs >= sizeof(sfdp_table)) { |
| msg_pdbg("Wrapping the start address around the SFDP table boundary (using 0x%x " |
| "instead of 0x%x).\n", (unsigned int)(offs % sizeof(sfdp_table)), offs); |
| offs %= sizeof(sfdp_table); |
| } |
| toread = min(sizeof(sfdp_table) - offs, readcnt); |
| memcpy(readarr, sfdp_table + offs, toread); |
| if (toread < readcnt) |
| msg_pdbg("Crossing the SFDP table boundary in a single " |
| "continuous chunk produces undefined results " |
| "after that point.\n"); |
| break; |
| default: |
| /* No special response. */ |
| break; |
| } |
| if (writearr[0] != JEDEC_WREN && writearr[0] != JEDEC_EWSR) |
| data->emu_status &= ~SPI_SR_WEL; |
| return 0; |
| } |
| |
| static int dummy_spi_send_command(const struct flashctx *flash, unsigned int writecnt, |
| unsigned int readcnt, |
| const unsigned char *writearr, |
| unsigned char *readarr) |
| { |
| unsigned int i; |
| struct emu_data *emu_data = flash->mst->spi.data; |
| if (!emu_data) { |
| msg_perr("No data in flash context!\n"); |
| return 1; |
| } |
| |
| msg_pspew("%s:", __func__); |
| |
| msg_pspew(" writing %u bytes:", writecnt); |
| for (i = 0; i < writecnt; i++) |
| msg_pspew(" 0x%02x", writearr[i]); |
| |
| /* Response for unknown commands and missing chip is 0xff. */ |
| memset(readarr, 0xff, readcnt); |
| switch (emu_data->emu_chip) { |
| case EMULATE_ST_M25P10_RES: |
| case EMULATE_SST_SST25VF040_REMS: |
| case EMULATE_SST_SST25VF032B: |
| case EMULATE_MACRONIX_MX25L6436: |
| case EMULATE_WINBOND_W25Q128FV: |
| if (emulate_spi_chip_response(writecnt, readcnt, writearr, |
| readarr, emu_data)) { |
| msg_pdbg("Invalid command sent to flash chip!\n"); |
| return 1; |
| } |
| break; |
| default: |
| break; |
| } |
| msg_pspew(" reading %u bytes:", readcnt); |
| for (i = 0; i < readcnt; i++) |
| msg_pspew(" 0x%02x", readarr[i]); |
| msg_pspew("\n"); |
| return 0; |
| } |
| |
| static int dummy_spi_write_256(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len) |
| { |
| return spi_write_chunked(flash, buf, start, len, |
| spi_write_256_chunksize); |
| } |
| |
| const struct programmer_entry programmer_dummy = { |
| .name = "dummy", |
| .type = OTHER, |
| /* FIXME */ |
| .devs.note = "Dummy device, does nothing and logs all accesses\n", |
| .init = dummy_init, |
| .map_flash_region = dummy_map, |
| .unmap_flash_region = dummy_unmap, |
| .delay = internal_delay, |
| }; |