ch347_spi.c - flashprog - Gitiles

 /*
  * This file is part of the flashrom project.
  *
  * Copyright (C) 2022 Nicholas Chin <nic.c3.14@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <string.h>
 #include <stdlib.h>
 #include <libusb.h>
 #include "platform.h"
 #include "programmer.h"
 #include "flash.h"

 #define CH347_CMD_SPI_SET_CFG	0xC0
 #define CH347_CMD_SPI_CS_CTRL	0xC1
 #define CH347_CMD_SPI_OUT_IN	0xC2
 #define CH347_CMD_SPI_IN	0xC3
 #define CH347_CMD_SPI_OUT	0xC4
 #define CH347_CMD_SPI_GET_CFG	0xCA

 #define CH347_CS_ASSERT		0x00
 #define CH347_CS_DEASSERT	0x40
 #define CH347_CS_CHANGE		0x80
 #define CH347_CS_IGNORE		0x00

 #define WRITE_EP	0x06
 #define READ_EP 	0x86

 #define MODE_1_IFACE 2
 #define MODE_2_IFACE 1

 /* The USB descriptor says the max transfer size is 512 bytes, but the
  * vendor driver only seems to transfer a maximum of 510 bytes at once,
  * leaving 507 bytes for data as the command + length take up 3 bytes
  */
 #define CH347_PACKET_SIZE 510
 #define CH347_MAX_DATA_LEN (CH347_PACKET_SIZE - 3)

 struct ch347_spi_data {
 	struct libusb_device_handle *handle;
 };

 /* TODO: Add support for HID mode */
 static const struct dev_entry devs_ch347_spi[] = {
 	{0x1A86, 0x55DB, OK, "QinHeng Electronics", "USB To UART+SPI+I2C"},
 	{0}
 };

 static int ch347_spi_shutdown(void *data)
 {
 	struct ch347_spi_data *ch347_data = data;

 	/* TODO: Set this depending on the mode */
 	int spi_interface = MODE_1_IFACE;
 	libusb_release_interface(ch347_data->handle, spi_interface);
 	libusb_attach_kernel_driver(ch347_data->handle, spi_interface);
 	libusb_close(ch347_data->handle);
 	libusb_exit(NULL);

 	free(data);
 	return 0;
 }

 static int ch347_cs_control(struct ch347_spi_data *ch347_data, uint8_t cs1, uint8_t cs2)
 {
 	uint8_t cmd[13] = {
 		[0] = CH347_CMD_SPI_CS_CTRL,
 		/* payload length, uint16 LSB: 10 */
 		[1] = 10,
 		[3] = cs1,
 		[8] = cs2
 	};

 	int32_t ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, cmd, sizeof(cmd), NULL, 1000);
 	if (ret < 0) {
 		msg_perr("Could not change CS!\n");
 		return -1;
 	}
 	return 0;
 }


 static int ch347_write(struct ch347_spi_data *ch347_data, unsigned int writecnt, const uint8_t *writearr)
 {
 	unsigned int data_len;
 	int packet_len;
 	int transferred;
 	int ret;
 	uint8_t resp_buf[4] = {0};
 	uint8_t buffer[CH347_PACKET_SIZE] = {0};
 	unsigned int bytes_written = 0;

 	while (bytes_written < writecnt) {
 		data_len = min(CH347_MAX_DATA_LEN, writecnt - bytes_written );
 		packet_len = data_len + 3;

 		buffer[0] = CH347_CMD_SPI_OUT;
 		buffer[1] = (data_len) & 0xFF;
 		buffer[2] = ((data_len) & 0xFF00) >> 8;
 		memcpy(buffer + 3, writearr + bytes_written, data_len);

 		ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, buffer, packet_len, &transferred, 1000);
 		if (ret < 0 || transferred != packet_len) {
 			msg_perr("Could not send write command\n");
 			return -1;
 		}

 		ret = libusb_bulk_transfer(ch347_data->handle, READ_EP, resp_buf, sizeof(resp_buf), NULL, 1000);
 		if (ret < 0) {
 			msg_perr("Could not receive write command response\n");
 			return -1;
 		}
 		bytes_written += data_len;
 	}
 	return 0;
 }

 static int ch347_read(struct ch347_spi_data *ch347_data, unsigned int readcnt, uint8_t *readarr)
 {
 	uint8_t *read_ptr = readarr;
 	int ret;
 	int transferred;
 	unsigned int bytes_read = 0;
 	uint8_t buffer[CH347_PACKET_SIZE] = {0};
 	uint8_t command_buf[7] = {
 		[0] = CH347_CMD_SPI_IN,
 		[1] = 4,
 		[2] = 0,
 		[3] = readcnt & 0xFF,
 		[4] = (readcnt & 0xFF00) >> 8,
 		[5] = (readcnt & 0xFF0000) >> 16,
 		[6] = (readcnt & 0xFF000000) >> 24
 	};

 	ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, command_buf, sizeof(command_buf), &transferred, 1000);
 	if (ret < 0 || transferred != sizeof(command_buf)) {
 		msg_perr("Could not send read command\n");
 		return -1;
 	}

 	while (bytes_read < readcnt) {
 		ret = libusb_bulk_transfer(ch347_data->handle, READ_EP, buffer, CH347_PACKET_SIZE, &transferred, 1000);
 		if (ret < 0) {
 			msg_perr("Could not read data\n");
 			return -1;
 		}
 		if (transferred > CH347_PACKET_SIZE) {
 			msg_perr("libusb bug: bytes received overflowed buffer\n");
 			return -1;
 		}
 		/* Response: u8 command, u16 data length, then the data that was read */
 		if (transferred < 3) {
 			msg_perr("CH347 returned an invalid response to read command\n");
 			return -1;
 		}
 		int ch347_data_length = read_le16(buffer, 1);
 		if (transferred - 3 < ch347_data_length) {
 			msg_perr("CH347 returned less data than data length header indicates\n");
 			return -1;
 		}
 		bytes_read += ch347_data_length;
 		if (bytes_read > readcnt) {
 			msg_perr("CH347 returned more bytes than requested\n");
 			return -1;
 		}
 		memcpy(read_ptr, buffer + 3, ch347_data_length);
 		read_ptr += ch347_data_length;
 	}
 	return 0;
 }

 static int ch347_spi_send_command(const struct flashctx *flash, unsigned int writecnt,
 		unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr)
 {
 	struct ch347_spi_data *ch347_data = flash->mst->spi.data;
 	int ret = 0;

 	ch347_cs_control(ch347_data, CH347_CS_ASSERT | CH347_CS_CHANGE, CH347_CS_IGNORE);
 	if (writecnt) {
 		ret = ch347_write(ch347_data, writecnt, writearr);
 		if (ret < 0) {
 			msg_perr("CH347 write error\n");
 			return -1;
 		}
 	}
 	if (readcnt) {
 		ret = ch347_read(ch347_data, readcnt, readarr);
 		if (ret < 0) {
 			msg_perr("CH347 read error\n");
 			return -1;
 		}
 	}
 	ch347_cs_control(ch347_data, CH347_CS_DEASSERT | CH347_CS_CHANGE, CH347_CS_IGNORE);

 	return 0;
 }

 static int32_t ch347_spi_config(struct ch347_spi_data *ch347_data, uint8_t divisor)
 {
 	int32_t ret;
 	uint8_t buff[29] = {
 		[0] = CH347_CMD_SPI_SET_CFG,
 		[1] = (sizeof(buff) - 3) & 0xFF,
 		[2] = ((sizeof(buff) - 3) & 0xFF00) >> 8,
 		/* Not sure what these two bytes do, but the vendor
 		 * drivers seem to unconditionally set these values
 		 */
 		[5] = 4,
 		[6] = 1,
 		/* Clock polarity: bit 1 */
 		[9] = 0,
 		/* Clock phase: bit 0 */
 		[11] = 0,
 		/* Another mystery byte */
 		[14] = 2,
 		/* Clock divisor: bits 5:3 */
 		[15] = (divisor & 0x7) << 3,
 		/* Bit order: bit 7, 0=MSB */
 		[17] = 0,
 		/* Yet another mystery byte */
 		[19] = 7,
 		/* CS polarity: bit 7 CS2, bit 6 CS1. 0 = active low */
 		[24] = 0
 	};

 	ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, buff, sizeof(buff), NULL, 1000);
 	if (ret < 0) {
 		msg_perr("Could not configure SPI interface\n");
 	}

 	/* FIXME: Not sure if the CH347 sends error responses for
 	 * invalid config data, if so the code should check
 	 */
 	ret = libusb_bulk_transfer(ch347_data->handle, READ_EP, buff, sizeof(buff), NULL, 1000);
 	if (ret < 0) {
 		msg_perr("Could not receive configure SPI command response\n");
 	}
 	return ret;
 }

 static const struct spi_master spi_master_ch347_spi = {
 	.features	= SPI_MASTER_4BA,
 	.max_data_read	= MAX_DATA_READ_UNLIMITED,
 	.max_data_write	= MAX_DATA_WRITE_UNLIMITED,
 	.command	= ch347_spi_send_command,
 	.multicommand	= default_spi_send_multicommand,
 	.read		= default_spi_read,
 	.write_256	= default_spi_write_256,
 	.write_aai	= default_spi_write_aai,
 	.shutdown	= ch347_spi_shutdown,
 	.probe_opcode	= default_spi_probe_opcode,
 };

 static unsigned int ch347_div_to_khz(unsigned int div)
 {
 	/* divisor is a power of two starting from 2 for `div == 0` */
 	const unsigned int clk_khz = 120*1000;
 	return clk_khz / (1 << (div + 1));
 }

 /* Largely copied from ch341a_spi.c */
 static int ch347_spi_init(void)
 {
 	struct ch347_spi_data *ch347_data = calloc(1, sizeof(*ch347_data));
 	if (!ch347_data) {
 		msg_perr("Could not allocate space for SPI data\n");
 		return 1;
 	}

 	unsigned int div = 3; /* Default to 7.5MHz */
 	char *const spispeed = extract_programmer_param("spispeed");
 	if (spispeed) {
 		char *endptr;
 		const unsigned long khz = strtoul(spispeed, &endptr, 10);
 		if (*endptr != '\0' || endptr == spispeed) {
 			msg_perr("Invalid `spispeed` argument, please provide the frequency in kHz.\n");
 			free(spispeed);
 			free(ch347_data);
 			return 1;
 		}
 		free(spispeed);

 		for (div = 0; div < 7; ++div) {
 			if (ch347_div_to_khz(div) <= khz)
 				break;
 		}
 		msg_pinfo("Using spispeed of %ukHz.\n", ch347_div_to_khz(div));
 	} else {
 		msg_pdbg("Using default spispeed of %ukHz.\n", ch347_div_to_khz(div));
 	}

 	int32_t ret = libusb_init(NULL);
 	if (ret < 0) {
 		msg_perr("Could not initialize libusb!\n");
 		free(ch347_data);
 		return 1;
 	}

 	/* Enable information, warning, and error messages (only). */
 #if LIBUSB_API_VERSION < 0x01000106
 	libusb_set_debug(NULL, 3);
 #else
 	libusb_set_option(NULL, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_INFO);
 #endif

 	uint16_t vid = devs_ch347_spi[0].vendor_id;
 	uint16_t pid = devs_ch347_spi[0].device_id;
 	ch347_data->handle = libusb_open_device_with_vid_pid(NULL, vid, pid);
 	if (ch347_data->handle == NULL) {
 		msg_perr("Couldn't open device %04x:%04x.\n", vid, pid);
 		free(ch347_data);
 		return 1;
 	}

 	/* TODO: set based on mode */
 	/* Mode 1 uses interface 2 for the SPI interface */
 	int spi_interface = MODE_1_IFACE;

 	ret = libusb_detach_kernel_driver(ch347_data->handle, spi_interface);
 	if (ret != 0 && ret != LIBUSB_ERROR_NOT_FOUND)
 		msg_pwarn("Cannot detach the existing USB driver. Claiming the interface may fail. %s\n",
 			libusb_error_name(ret));

 	ret = libusb_claim_interface(ch347_data->handle, spi_interface);
 	if (ret != 0) {
 		msg_perr("Failed to claim interface 2: '%s'\n", libusb_error_name(ret));
 		goto error_exit;
 	}

 	struct libusb_device *dev;
 	if (!(dev = libusb_get_device(ch347_data->handle))) {
 		msg_perr("Failed to get device from device handle.\n");
 		goto error_exit;
 	}

 	struct libusb_device_descriptor desc;
 	ret = libusb_get_device_descriptor(dev, &desc);
 	if (ret < 0) {
 		msg_perr("Failed to get device descriptor: '%s'\n", libusb_error_name(ret));
 		goto error_exit;
 	}

 	msg_pdbg("Device revision is %d.%01d.%01d\n",
 		(desc.bcdDevice >> 8) & 0x00FF,
 		(desc.bcdDevice >> 4) & 0x000F,
 		(desc.bcdDevice >> 0) & 0x000F);

 	/* TODO: add programmer cfg for things like CS pin */
 	if (ch347_spi_config(ch347_data, div) < 0)
 		goto error_exit;

 	return register_spi_master(&spi_master_ch347_spi, ch347_data);

 error_exit:
 	ch347_spi_shutdown(ch347_data);
 	return 1;
 }

 const struct programmer_entry programmer_ch347_spi = {
 	.name		= "ch347_spi",
 	.type		= USB,
 	.devs.dev	= devs_ch347_spi,
 	.init		= ch347_spi_init,
 };
	/*
	* This file is part of the flashrom project.
	*
	* Copyright (C) 2022 Nicholas Chin <nic.c3.14@gmail.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <string.h>
	#include <stdlib.h>
	#include <libusb.h>
	#include "platform.h"
	#include "programmer.h"
	#include "flash.h"

	#define CH347_CMD_SPI_SET_CFG 0xC0
	#define CH347_CMD_SPI_CS_CTRL 0xC1
	#define CH347_CMD_SPI_OUT_IN 0xC2
	#define CH347_CMD_SPI_IN 0xC3
	#define CH347_CMD_SPI_OUT 0xC4
	#define CH347_CMD_SPI_GET_CFG 0xCA

	#define CH347_CS_ASSERT 0x00
	#define CH347_CS_DEASSERT 0x40
	#define CH347_CS_CHANGE 0x80
	#define CH347_CS_IGNORE 0x00

	#define WRITE_EP 0x06
	#define READ_EP 0x86

	#define MODE_1_IFACE 2
	#define MODE_2_IFACE 1

	/* The USB descriptor says the max transfer size is 512 bytes, but the
	* vendor driver only seems to transfer a maximum of 510 bytes at once,
	* leaving 507 bytes for data as the command + length take up 3 bytes
	*/
	#define CH347_PACKET_SIZE 510
	#define CH347_MAX_DATA_LEN (CH347_PACKET_SIZE - 3)

	struct ch347_spi_data {
	struct libusb_device_handle *handle;
	};

	/* TODO: Add support for HID mode */
	static const struct dev_entry devs_ch347_spi[] = {
	{0x1A86, 0x55DB, OK, "QinHeng Electronics", "USB To UART+SPI+I2C"},
	{0}
	};

	static int ch347_spi_shutdown(void *data)
	{
	struct ch347_spi_data *ch347_data = data;

	/* TODO: Set this depending on the mode */
	int spi_interface = MODE_1_IFACE;
	libusb_release_interface(ch347_data->handle, spi_interface);
	libusb_attach_kernel_driver(ch347_data->handle, spi_interface);
	libusb_close(ch347_data->handle);
	libusb_exit(NULL);

	free(data);
	return 0;
	}

	static int ch347_cs_control(struct ch347_spi_data *ch347_data, uint8_t cs1, uint8_t cs2)
	{
	uint8_t cmd[13] = {
	[0] = CH347_CMD_SPI_CS_CTRL,
	/* payload length, uint16 LSB: 10 */
	[1] = 10,
	[3] = cs1,
	[8] = cs2
	};

	int32_t ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, cmd, sizeof(cmd), NULL, 1000);
	if (ret < 0) {
	msg_perr("Could not change CS!\n");
	return -1;
	}
	return 0;
	}


	static int ch347_write(struct ch347_spi_data ch347_data, unsigned int writecnt, const uint8_t writearr)
	{
	unsigned int data_len;
	int packet_len;
	int transferred;
	int ret;
	uint8_t resp_buf[4] = {0};
	uint8_t buffer[CH347_PACKET_SIZE] = {0};
	unsigned int bytes_written = 0;

	while (bytes_written < writecnt) {
	data_len = min(CH347_MAX_DATA_LEN, writecnt - bytes_written );
	packet_len = data_len + 3;

	buffer[0] = CH347_CMD_SPI_OUT;
	buffer[1] = (data_len) & 0xFF;
	buffer[2] = ((data_len) & 0xFF00) >> 8;
	memcpy(buffer + 3, writearr + bytes_written, data_len);

	ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, buffer, packet_len, &transferred, 1000);
	if (ret < 0 \|\| transferred != packet_len) {
	msg_perr("Could not send write command\n");
	return -1;
	}

	ret = libusb_bulk_transfer(ch347_data->handle, READ_EP, resp_buf, sizeof(resp_buf), NULL, 1000);
	if (ret < 0) {
	msg_perr("Could not receive write command response\n");
	return -1;
	}
	bytes_written += data_len;
	}
	return 0;
	}

	static int ch347_read(struct ch347_spi_data ch347_data, unsigned int readcnt, uint8_t readarr)
	{
	uint8_t *read_ptr = readarr;
	int ret;
	int transferred;
	unsigned int bytes_read = 0;
	uint8_t buffer[CH347_PACKET_SIZE] = {0};
	uint8_t command_buf[7] = {
	[0] = CH347_CMD_SPI_IN,
	[1] = 4,
	[2] = 0,
	[3] = readcnt & 0xFF,
	[4] = (readcnt & 0xFF00) >> 8,
	[5] = (readcnt & 0xFF0000) >> 16,
	[6] = (readcnt & 0xFF000000) >> 24
	};

	ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, command_buf, sizeof(command_buf), &transferred, 1000);
	if (ret < 0 \|\| transferred != sizeof(command_buf)) {
	msg_perr("Could not send read command\n");
	return -1;
	}

	while (bytes_read < readcnt) {
	ret = libusb_bulk_transfer(ch347_data->handle, READ_EP, buffer, CH347_PACKET_SIZE, &transferred, 1000);
	if (ret < 0) {
	msg_perr("Could not read data\n");
	return -1;
	}
	if (transferred > CH347_PACKET_SIZE) {
	msg_perr("libusb bug: bytes received overflowed buffer\n");
	return -1;
	}
	/* Response: u8 command, u16 data length, then the data that was read */
	if (transferred < 3) {
	msg_perr("CH347 returned an invalid response to read command\n");
	return -1;
	}
	int ch347_data_length = read_le16(buffer, 1);
	if (transferred - 3 < ch347_data_length) {
	msg_perr("CH347 returned less data than data length header indicates\n");
	return -1;
	}
	bytes_read += ch347_data_length;
	if (bytes_read > readcnt) {
	msg_perr("CH347 returned more bytes than requested\n");
	return -1;
	}
	memcpy(read_ptr, buffer + 3, ch347_data_length);
	read_ptr += ch347_data_length;
	}
	return 0;
	}

	static int ch347_spi_send_command(const struct flashctx *flash, unsigned int writecnt,
	unsigned int readcnt, const unsigned char writearr, unsigned char readarr)
	{
	struct ch347_spi_data *ch347_data = flash->mst->spi.data;
	int ret = 0;

	ch347_cs_control(ch347_data, CH347_CS_ASSERT \| CH347_CS_CHANGE, CH347_CS_IGNORE);
	if (writecnt) {
	ret = ch347_write(ch347_data, writecnt, writearr);
	if (ret < 0) {
	msg_perr("CH347 write error\n");
	return -1;
	}
	}
	if (readcnt) {
	ret = ch347_read(ch347_data, readcnt, readarr);
	if (ret < 0) {
	msg_perr("CH347 read error\n");
	return -1;
	}
	}
	ch347_cs_control(ch347_data, CH347_CS_DEASSERT \| CH347_CS_CHANGE, CH347_CS_IGNORE);

	return 0;
	}

	static int32_t ch347_spi_config(struct ch347_spi_data *ch347_data, uint8_t divisor)
	{
	int32_t ret;
	uint8_t buff[29] = {
	[0] = CH347_CMD_SPI_SET_CFG,
	[1] = (sizeof(buff) - 3) & 0xFF,
	[2] = ((sizeof(buff) - 3) & 0xFF00) >> 8,
	/* Not sure what these two bytes do, but the vendor
	* drivers seem to unconditionally set these values
	*/
	[5] = 4,
	[6] = 1,
	/* Clock polarity: bit 1 */
	[9] = 0,
	/* Clock phase: bit 0 */
	[11] = 0,
	/* Another mystery byte */
	[14] = 2,
	/* Clock divisor: bits 5:3 */
	[15] = (divisor & 0x7) << 3,
	/* Bit order: bit 7, 0=MSB */
	[17] = 0,
	/* Yet another mystery byte */
	[19] = 7,
	/* CS polarity: bit 7 CS2, bit 6 CS1. 0 = active low */
	[24] = 0
	};

	ret = libusb_bulk_transfer(ch347_data->handle, WRITE_EP, buff, sizeof(buff), NULL, 1000);
	if (ret < 0) {
	msg_perr("Could not configure SPI interface\n");
	}

	/* FIXME: Not sure if the CH347 sends error responses for
	* invalid config data, if so the code should check
	*/
	ret = libusb_bulk_transfer(ch347_data->handle, READ_EP, buff, sizeof(buff), NULL, 1000);
	if (ret < 0) {
	msg_perr("Could not receive configure SPI command response\n");
	}
	return ret;
	}

	static const struct spi_master spi_master_ch347_spi = {
	.features = SPI_MASTER_4BA,
	.max_data_read = MAX_DATA_READ_UNLIMITED,
	.max_data_write = MAX_DATA_WRITE_UNLIMITED,
	.command = ch347_spi_send_command,
	.multicommand = default_spi_send_multicommand,
	.read = default_spi_read,
	.write_256 = default_spi_write_256,
	.write_aai = default_spi_write_aai,
	.shutdown = ch347_spi_shutdown,
	.probe_opcode = default_spi_probe_opcode,
	};

	static unsigned int ch347_div_to_khz(unsigned int div)
	{
	/* divisor is a power of two starting from 2 for `div == 0` */
	const unsigned int clk_khz = 120*1000;
	return clk_khz / (1 << (div + 1));
	}

	/* Largely copied from ch341a_spi.c */
	static int ch347_spi_init(void)
	{
	struct ch347_spi_data ch347_data = calloc(1, sizeof(ch347_data));
	if (!ch347_data) {
	msg_perr("Could not allocate space for SPI data\n");
	return 1;
	}

	unsigned int div = 3; /* Default to 7.5MHz */
	char *const spispeed = extract_programmer_param("spispeed");
	if (spispeed) {
	char *endptr;
	const unsigned long khz = strtoul(spispeed, &endptr, 10);
	if (*endptr != '\0' \|\| endptr == spispeed) {
	msg_perr("Invalid `spispeed` argument, please provide the frequency in kHz.\n");
	free(spispeed);
	free(ch347_data);
	return 1;
	}
	free(spispeed);

	for (div = 0; div < 7; ++div) {
	if (ch347_div_to_khz(div) <= khz)
	break;
	}
	msg_pinfo("Using spispeed of %ukHz.\n", ch347_div_to_khz(div));
	} else {
	msg_pdbg("Using default spispeed of %ukHz.\n", ch347_div_to_khz(div));
	}

	int32_t ret = libusb_init(NULL);
	if (ret < 0) {
	msg_perr("Could not initialize libusb!\n");
	free(ch347_data);
	return 1;
	}

	/* Enable information, warning, and error messages (only). */
	#if LIBUSB_API_VERSION < 0x01000106
	libusb_set_debug(NULL, 3);
	#else
	libusb_set_option(NULL, LIBUSB_OPTION_LOG_LEVEL, LIBUSB_LOG_LEVEL_INFO);
	#endif

	uint16_t vid = devs_ch347_spi[0].vendor_id;
	uint16_t pid = devs_ch347_spi[0].device_id;
	ch347_data->handle = libusb_open_device_with_vid_pid(NULL, vid, pid);
	if (ch347_data->handle == NULL) {
	msg_perr("Couldn't open device %04x:%04x.\n", vid, pid);
	free(ch347_data);
	return 1;
	}

	/* TODO: set based on mode */
	/* Mode 1 uses interface 2 for the SPI interface */
	int spi_interface = MODE_1_IFACE;

	ret = libusb_detach_kernel_driver(ch347_data->handle, spi_interface);
	if (ret != 0 && ret != LIBUSB_ERROR_NOT_FOUND)
	msg_pwarn("Cannot detach the existing USB driver. Claiming the interface may fail. %s\n",
	libusb_error_name(ret));

	ret = libusb_claim_interface(ch347_data->handle, spi_interface);
	if (ret != 0) {
	msg_perr("Failed to claim interface 2: '%s'\n", libusb_error_name(ret));
	goto error_exit;
	}

	struct libusb_device *dev;
	if (!(dev = libusb_get_device(ch347_data->handle))) {
	msg_perr("Failed to get device from device handle.\n");
	goto error_exit;
	}

	struct libusb_device_descriptor desc;
	ret = libusb_get_device_descriptor(dev, &desc);
	if (ret < 0) {
	msg_perr("Failed to get device descriptor: '%s'\n", libusb_error_name(ret));
	goto error_exit;
	}

	msg_pdbg("Device revision is %d.%01d.%01d\n",
	(desc.bcdDevice >> 8) & 0x00FF,
	(desc.bcdDevice >> 4) & 0x000F,
	(desc.bcdDevice >> 0) & 0x000F);

	/* TODO: add programmer cfg for things like CS pin */
	if (ch347_spi_config(ch347_data, div) < 0)
	goto error_exit;

	return register_spi_master(&spi_master_ch347_spi, ch347_data);

	error_exit:
	ch347_spi_shutdown(ch347_data);
	return 1;
	}

	const struct programmer_entry programmer_ch347_spi = {
	.name = "ch347_spi",
	.type = USB,
	.devs.dev = devs_ch347_spi,
	.init = ch347_spi_init,
	};