| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2000 Silicon Integrated System Corporation |
| * Copyright (C) 2006 Giampiero Giancipoli <gianci@email.it> |
| * Copyright (C) 2006 coresystems GmbH <info@coresystems.de> |
| * Copyright (C) 2007 Carl-Daniel Hailfinger |
| * Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include "flash.h" |
| #include "chipdrivers.h" |
| |
| #define MAX_REFLASH_TRIES 0x10 |
| #define MASK_FULL 0xffff |
| #define MASK_2AA 0x7ff |
| #define MASK_AAA 0xfff |
| |
| /* Check one byte for odd parity */ |
| uint8_t oddparity(uint8_t val) |
| { |
| val = (val ^ (val >> 4)) & 0xf; |
| val = (val ^ (val >> 2)) & 0x3; |
| return (val ^ (val >> 1)) & 0x1; |
| } |
| |
| void toggle_ready_jedec_common(chipaddr dst, int delay) |
| { |
| unsigned int i = 0; |
| uint8_t tmp1, tmp2; |
| |
| tmp1 = chip_readb(dst) & 0x40; |
| |
| while (i++ < 0xFFFFFFF) { |
| if (delay) |
| programmer_delay(delay); |
| tmp2 = chip_readb(dst) & 0x40; |
| if (tmp1 == tmp2) { |
| break; |
| } |
| tmp1 = tmp2; |
| } |
| if (i > 0x100000) |
| printf_debug("%s: excessive loops, i=0x%x\n", __func__, i); |
| } |
| |
| void toggle_ready_jedec(chipaddr dst) |
| { |
| toggle_ready_jedec_common(dst, 0); |
| } |
| |
| /* Some chips require a minimum delay between toggle bit reads. |
| * The Winbond W39V040C wants 50 ms between reads on sector erase toggle, |
| * but experiments show that 2 ms are already enough. Pick a safety factor |
| * of 4 and use an 8 ms delay. |
| * Given that erase is slow on all chips, it is recommended to use |
| * toggle_ready_jedec_slow in erase functions. |
| */ |
| void toggle_ready_jedec_slow(chipaddr dst) |
| { |
| toggle_ready_jedec_common(dst, 8 * 1000); |
| } |
| |
| void data_polling_jedec(chipaddr dst, uint8_t data) |
| { |
| unsigned int i = 0; |
| uint8_t tmp; |
| |
| data &= 0x80; |
| |
| while (i++ < 0xFFFFFFF) { |
| tmp = chip_readb(dst) & 0x80; |
| if (tmp == data) { |
| break; |
| } |
| } |
| if (i > 0x100000) |
| printf_debug("%s: excessive loops, i=0x%x\n", __func__, i); |
| } |
| |
| void start_program_jedec_common(struct flashchip *flash, unsigned int mask) |
| { |
| chipaddr bios = flash->virtual_memory; |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| chip_writeb(0xA0, bios + (0x5555 & mask)); |
| } |
| |
| int probe_jedec_common(struct flashchip *flash, unsigned int mask) |
| { |
| chipaddr bios = flash->virtual_memory; |
| uint8_t id1, id2; |
| uint32_t largeid1, largeid2; |
| uint32_t flashcontent1, flashcontent2; |
| int probe_timing_enter, probe_timing_exit; |
| |
| if (flash->probe_timing > 0) |
| probe_timing_enter = probe_timing_exit = flash->probe_timing; |
| else if (flash->probe_timing == TIMING_ZERO) { /* No delay. */ |
| probe_timing_enter = probe_timing_exit = 0; |
| } else if (flash->probe_timing == TIMING_FIXME) { /* == _IGNORED */ |
| printf_debug("Chip lacks correct probe timing information, " |
| "using default 10mS/40uS. "); |
| probe_timing_enter = 10000; |
| probe_timing_exit = 40; |
| } else { |
| printf("Chip has negative value in probe_timing, failing " |
| "without chip access\n"); |
| return 0; |
| } |
| |
| /* Issue JEDEC Product ID Entry command */ |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| if (probe_timing_enter) |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| if (probe_timing_enter) |
| programmer_delay(10); |
| chip_writeb(0x90, bios + (0x5555 & mask)); |
| if (probe_timing_enter) |
| programmer_delay(probe_timing_enter); |
| |
| /* Read product ID */ |
| id1 = chip_readb(bios); |
| id2 = chip_readb(bios + 0x01); |
| largeid1 = id1; |
| largeid2 = id2; |
| |
| /* Check if it is a continuation ID, this should be a while loop. */ |
| if (id1 == 0x7F) { |
| largeid1 <<= 8; |
| id1 = chip_readb(bios + 0x100); |
| largeid1 |= id1; |
| } |
| if (id2 == 0x7F) { |
| largeid2 <<= 8; |
| id2 = chip_readb(bios + 0x101); |
| largeid2 |= id2; |
| } |
| |
| /* Issue JEDEC Product ID Exit command */ |
| if ((flash->feature_bits & FEATURE_SHORT_RESET) == FEATURE_LONG_RESET) |
| { |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| if (probe_timing_exit) |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| if (probe_timing_exit) |
| programmer_delay(10); |
| } |
| chip_writeb(0xF0, bios + (0x5555 & mask)); |
| if (probe_timing_exit) |
| programmer_delay(probe_timing_exit); |
| |
| printf_debug("%s: id1 0x%02x, id2 0x%02x", __func__, largeid1, largeid2); |
| if (!oddparity(id1)) |
| printf_debug(", id1 parity violation"); |
| |
| /* Read the product ID location again. We should now see normal flash contents. */ |
| flashcontent1 = chip_readb(bios); |
| flashcontent2 = chip_readb(bios + 0x01); |
| |
| /* Check if it is a continuation ID, this should be a while loop. */ |
| if (flashcontent1 == 0x7F) { |
| flashcontent1 <<= 8; |
| flashcontent1 |= chip_readb(bios + 0x100); |
| } |
| if (flashcontent2 == 0x7F) { |
| flashcontent2 <<= 8; |
| flashcontent2 |= chip_readb(bios + 0x101); |
| } |
| |
| if (largeid1 == flashcontent1) |
| printf_debug(", id1 is normal flash content"); |
| if (largeid2 == flashcontent2) |
| printf_debug(", id2 is normal flash content"); |
| |
| printf_debug("\n"); |
| if (largeid1 != flash->manufacture_id || largeid2 != flash->model_id) |
| return 0; |
| |
| if (flash->feature_bits & FEATURE_REGISTERMAP) |
| map_flash_registers(flash); |
| |
| return 1; |
| } |
| |
| int erase_sector_jedec_common(struct flashchip *flash, unsigned int page, |
| unsigned int pagesize, unsigned int mask) |
| { |
| chipaddr bios = flash->virtual_memory; |
| |
| /* Issue the Sector Erase command */ |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| programmer_delay(10); |
| chip_writeb(0x80, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| programmer_delay(10); |
| chip_writeb(0x30, bios + page); |
| programmer_delay(10); |
| |
| /* wait for Toggle bit ready */ |
| toggle_ready_jedec_slow(bios); |
| |
| if (check_erased_range(flash, page, pagesize)) { |
| fprintf(stderr,"ERASE FAILED!\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| int erase_block_jedec_common(struct flashchip *flash, unsigned int block, |
| unsigned int blocksize, unsigned int mask) |
| { |
| chipaddr bios = flash->virtual_memory; |
| |
| /* Issue the Sector Erase command */ |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| programmer_delay(10); |
| chip_writeb(0x80, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| programmer_delay(10); |
| chip_writeb(0x50, bios + block); |
| programmer_delay(10); |
| |
| /* wait for Toggle bit ready */ |
| toggle_ready_jedec_slow(bios); |
| |
| if (check_erased_range(flash, block, blocksize)) { |
| fprintf(stderr,"ERASE FAILED!\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| int erase_chip_jedec_common(struct flashchip *flash, unsigned int mask) |
| { |
| int total_size = flash->total_size * 1024; |
| chipaddr bios = flash->virtual_memory; |
| |
| /* Issue the JEDEC Chip Erase command */ |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| programmer_delay(10); |
| chip_writeb(0x80, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| |
| chip_writeb(0xAA, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| chip_writeb(0x55, bios + (0x2AAA & mask)); |
| programmer_delay(10); |
| chip_writeb(0x10, bios + (0x5555 & mask)); |
| programmer_delay(10); |
| |
| toggle_ready_jedec_slow(bios); |
| |
| if (check_erased_range(flash, 0, total_size)) { |
| fprintf(stderr,"ERASE FAILED!\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| int write_byte_program_jedec_common(struct flashchip *flash, uint8_t *src, |
| chipaddr dst, unsigned int mask) |
| { |
| int tried = 0, failed = 0; |
| chipaddr bios = flash->virtual_memory; |
| |
| /* If the data is 0xFF, don't program it and don't complain. */ |
| if (*src == 0xFF) { |
| return 0; |
| } |
| |
| retry: |
| /* Issue JEDEC Byte Program command */ |
| start_program_jedec_common(flash, mask); |
| |
| /* transfer data from source to destination */ |
| chip_writeb(*src, dst); |
| toggle_ready_jedec(bios); |
| |
| if (chip_readb(dst) != *src && tried++ < MAX_REFLASH_TRIES) { |
| goto retry; |
| } |
| |
| if (tried >= MAX_REFLASH_TRIES) |
| failed = 1; |
| |
| return failed; |
| } |
| |
| int write_sector_jedec_common(struct flashchip *flash, uint8_t *src, |
| chipaddr dst, unsigned int page_size, unsigned int mask) |
| { |
| int i, failed = 0; |
| chipaddr olddst; |
| |
| olddst = dst; |
| for (i = 0; i < page_size; i++) { |
| if (write_byte_program_jedec_common(flash, src, dst, mask)) |
| failed = 1; |
| dst++, src++; |
| } |
| if (failed) |
| fprintf(stderr, " writing sector at 0x%lx failed!\n", olddst); |
| |
| return failed; |
| } |
| |
| int write_page_write_jedec_common(struct flashchip *flash, uint8_t *src, |
| int start, int page_size, unsigned int mask) |
| { |
| int i, tried = 0, failed; |
| uint8_t *s = src; |
| chipaddr bios = flash->virtual_memory; |
| chipaddr dst = bios + start; |
| chipaddr d = dst; |
| |
| retry: |
| /* Issue JEDEC Start Program comand */ |
| start_program_jedec_common(flash, mask); |
| |
| /* transfer data from source to destination */ |
| for (i = 0; i < page_size; i++) { |
| /* If the data is 0xFF, don't program it */ |
| if (*src != 0xFF) |
| chip_writeb(*src, dst); |
| dst++; |
| src++; |
| } |
| |
| toggle_ready_jedec(dst - 1); |
| |
| dst = d; |
| src = s; |
| failed = verify_range(flash, src, start, page_size, NULL); |
| |
| if (failed && tried++ < MAX_REFLASH_TRIES) { |
| fprintf(stderr, "retrying.\n"); |
| goto retry; |
| } |
| if (failed) { |
| fprintf(stderr, " page 0x%lx failed!\n", |
| (d - bios) / page_size); |
| } |
| return failed; |
| } |
| |
| int getaddrmask(struct flashchip *flash) |
| { |
| switch (flash->feature_bits & FEATURE_ADDR_MASK) { |
| case FEATURE_ADDR_FULL: |
| return MASK_FULL; |
| break; |
| case FEATURE_ADDR_2AA: |
| return MASK_2AA; |
| break; |
| case FEATURE_ADDR_AAA: |
| return MASK_AAA; |
| break; |
| default: |
| fprintf(stderr, "%s called with unknown mask\n", __func__); |
| return 0; |
| break; |
| } |
| } |
| |
| int write_jedec(struct flashchip *flash, uint8_t *buf) |
| { |
| int mask; |
| int i, failed = 0; |
| int total_size = flash->total_size * 1024; |
| int page_size = flash->page_size; |
| |
| mask = getaddrmask(flash); |
| |
| if (erase_chip_jedec(flash)) { |
| fprintf(stderr,"ERASE FAILED!\n"); |
| return -1; |
| } |
| |
| printf("Programming page: "); |
| for (i = 0; i < total_size / page_size; i++) { |
| printf("%04d at address: 0x%08x", i, i * page_size); |
| if (write_page_write_jedec_common(flash, buf + i * page_size, |
| i * page_size, page_size, mask)) |
| failed = 1; |
| printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); |
| } |
| printf("\n"); |
| |
| return failed; |
| } |
| |
| int write_jedec_1(struct flashchip *flash, uint8_t * buf) |
| { |
| int i; |
| chipaddr bios = flash->virtual_memory; |
| chipaddr dst = bios; |
| int mask; |
| |
| mask = getaddrmask(flash); |
| |
| programmer_delay(10); |
| if (erase_flash(flash)) { |
| fprintf(stderr, "ERASE FAILED!\n"); |
| return -1; |
| } |
| |
| printf("Programming page: "); |
| for (i = 0; i < flash->total_size; i++) { |
| if ((i & 0x3) == 0) |
| printf("address: 0x%08lx", (unsigned long)i * 1024); |
| |
| write_sector_jedec_common(flash, buf + i * 1024, dst + i * 1024, 1024, mask); |
| |
| if ((i & 0x3) == 0) |
| printf("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); |
| } |
| |
| printf("\n"); |
| return 0; |
| } |
| |
| /* erase chip with block_erase() prototype */ |
| int erase_chip_block_jedec(struct flashchip *flash, unsigned int addr, |
| unsigned int blocksize) |
| { |
| int mask; |
| |
| mask = getaddrmask(flash); |
| if ((addr != 0) || (blocksize != flash->total_size * 1024)) { |
| fprintf(stderr, "%s called with incorrect arguments\n", |
| __func__); |
| return -1; |
| } |
| return erase_chip_jedec_common(flash, mask); |
| } |
| |
| int probe_jedec(struct flashchip *flash) |
| { |
| int mask; |
| |
| mask = getaddrmask(flash); |
| return probe_jedec_common(flash, mask); |
| } |
| |
| int erase_sector_jedec(struct flashchip *flash, unsigned int page, unsigned int size) |
| { |
| int mask; |
| |
| mask = getaddrmask(flash); |
| return erase_sector_jedec_common(flash, page, size, mask); |
| } |
| |
| int erase_block_jedec(struct flashchip *flash, unsigned int page, unsigned int size) |
| { |
| int mask; |
| |
| mask = getaddrmask(flash); |
| return erase_block_jedec_common(flash, page, size, mask); |
| } |
| |
| int erase_chip_jedec(struct flashchip *flash) |
| { |
| int mask; |
| |
| mask = getaddrmask(flash); |
| return erase_chip_jedec_common(flash, mask); |
| } |