blob: f8d336e8e6c2fc579c5e164008ff8083118174ee [file] [log] [blame]
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2000 Silicon Integrated System Corporation
* Copyright (C) 2004 Tyan Corp
* Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org>
* Copyright (C) 2006-2009 Carl-Daniel Hailfinger
* Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "flash.h"
#include "flashchips.h"
#include "chipdrivers.h"
/**
* List of supported flash chips.
*
* Temporarily, this file is sorted alphabetically by vendor and name to
* assist with merging the Chromium fork of flashrom.
*
* The usual intention is that that this list is sorted by vendor, then chip
* family and chip density, which is useful for the output of 'flashrom -L'.
*/
const struct flashchip flashchips[] = {
/*
* .vendor = Vendor name
* .name = Chip name
* .bustype = Supported flash bus types (Parallel, LPC...)
* .manufacture_id = Manufacturer chip ID
* .model_id = Model chip ID
* .total_size = Total size in (binary) kbytes
* .page_size = Page or eraseblock(?) size in bytes
* .tested = Test status
* .probe = Probe function
* .probe_timing = Probe function delay
* .block_erasers[] = Array of erase layouts and erase functions
* {
* .eraseblocks[] = Array of { blocksize, blockcount }
* .block_erase = Block erase function
* }
* .printlock = Chip lock status function
* .unlock = Chip unlock function
* .write = Chip write function
* .read = Chip read function
* .voltage = Voltage range in millivolt
*/
{
.vendor = "AMD",
.name = "Am29F002(N)BB",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F002BB,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */
},
{
.vendor = "AMD",
.name = "Am29F002(N)BT",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F002BT,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */
},
{
.vendor = "AMD",
.name = "Am29F010",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F010,
.total_size = 128,
.page_size = 16 * 1024,
.feature_bits = FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {16 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMD",
.name = "Am29F010A/B",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F010,
.total_size = 128,
.page_size = 16 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {16 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMD",
.name = "Am29F016D",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F016D,
.total_size = 2 * 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMD",
.name = "Am29F040",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F040,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMD",
.name = "Am29F040B",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F040,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMD",
.name = "Am29F080",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F080,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMD",
.name = "Am29F080B",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29F080,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMD",
.name = "Am29LV001BB",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV001BB,
.total_size = 128,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 1},
{4 * 1024, 2},
{16 * 1024, 7},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */
},
{
.vendor = "AMD",
.name = "Am29LV001BT",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV001BT,
.total_size = 128,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 7},
{4 * 1024, 2},
{8 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */
},
{
.vendor = "AMD",
.name = "Am29LV002BB",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV002BB,
.total_size = 256,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */
},
{
.vendor = "AMD",
.name = "Am29LV002BT",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV002BT,
.total_size = 256,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */
},
{
.vendor = "AMD",
.name = "Am29LV004BB",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV004BB,
.total_size = 512,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 7},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "AMD",
.name = "Am29LV004BT",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV004BT,
.total_size = 512,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "AMD",
.name = "Am29LV008BB",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV008BB,
.total_size = 1024,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 15},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */
},
{
.vendor = "AMD",
.name = "Am29LV008BT",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV008BT,
.total_size = 1024,
.page_size = 64 * 1024, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 15},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */
},
{
.vendor = "AMD",
.name = "Am29LV040B",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/
},
{
.vendor = "AMD",
.name = "Am29LV081B",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID,
.model_id = AMD_AM29LV080B,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */
},
{
.vendor = "AMIC",
.name = "A25L010",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25L010,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 32 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 2 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 128 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L016",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25L016,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 512 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 32 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 2048 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L020",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25L020,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 64 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 4 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 256 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L032",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25L032,
.total_size = 4096,
.page_size = 256,
/* OTP: 64B total; read 0x4B, 0x48; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 1024 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 64 } },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 64 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 4096 * 1024, 1 } },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 4096 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L040",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25L040,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 128 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 8 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 512 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L05PT",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L05PT,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L05PU",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L05PU,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L080",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25L080,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 256 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 16 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 1024 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L10PT",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L10PT,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 1},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L10PU",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L10PU,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 1},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L16PT",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L16PT,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L16PU",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L16PU,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PR,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 31},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L20PT",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L20PT,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L20PU",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L20PU,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
/* The A25L40P{T,U} chips are distinguished by their
* erase block layouts, but without any distinction in RDID.
* This inexplicable quirk was verified by Rudolf Marek
* and discussed on the flashrom mailing list on 2010-07-12.
*/
{
.vendor = "AMIC",
.name = "A25L40PT",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L40PT,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PR,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L40PU",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L40PU,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 7},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L512",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25L512,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 16 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 1 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 64 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25L80P",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = AMIC_A25L80P,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PRE,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 15},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25LQ032/A25LQ32A",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25LQ032,
.total_size = 4096,
.page_size = 256,
/* A25LQ32A supports SFDP */
/* OTP: 64B total; read 0x4B, 0x48; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 1024 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 64 } },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 64 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 4096 * 1024, 1 } },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 4096 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25LQ16",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25LQ16,
.total_size = 2048,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, 0x48; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 512 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 64 * 1024, 32 } },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 32 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 2048 * 1024, 1 } },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 2048 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A25LQ64",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A25LQ64,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
/* QPI enable 0x35, disable 0xF5 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 2048 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 32 * 1024, 256 } },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 128 } },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 8192 * 1024, 1 } },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 8192 * 1024, 1 } },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enhance (sic!) */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "AMIC",
.name = "A29002B",
.bustype = BUS_PARALLEL,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A29002B,
.total_size = 256,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMIC",
.name = "A29002T",
.bustype = BUS_PARALLEL,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A29002T,
.total_size = 256,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMIC",
.name = "A29040B",
.bustype = BUS_PARALLEL,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A29040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "AMIC",
.name = "A49LF040A",
.bustype = BUS_LPC,
.manufacture_id = AMIC_ID_NOPREFIX,
.model_id = AMIC_A49LF040A,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Atmel",
.name = "AT25DF021",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF021,
.total_size = 256,
.page_size = 256,
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */
},
{
.vendor = "Atmel",
.name = "AT25DF021A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF021A,
.total_size = 256,
.page_size = 256,
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 3600},
},
{
.vendor = "Atmel",
.name = "AT25DF041A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF041A,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */
},
{
.vendor = "Atmel",
.name = "AT25DF081",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF081,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */
},
{
.vendor = "Atmel",
.name = "AT25DF081A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF081A,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df_sec,
.unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25DF161",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF161,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df_sec,
.unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
/*The AT26DF321 has the same ID as the AT25DF321. */
{
.vendor = "Atmel",
.name = "AT25DF321",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF321,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25DF321A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF321A,
.total_size = 4096,
.page_size = 256,
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df_sec,
.unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25DF641(A)",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF641,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df_sec,
.unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25DL081",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DF081,
.total_size = 1024,
.page_size = 256,
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df_sec,
.unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
.write = spi_chip_write_256, /* Dual I/O (0xA2) supported */
.read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "Atmel",
.name = "AT25DL161",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DL161,
.total_size = 2048,
.page_size = 256,
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df_sec,
.unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
.write = spi_chip_write_256, /* Dual I/O (0xA2) supported */
.read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "Atmel",
.name = "AT25DQ161",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25DQ161,
.total_size = 2048,
.page_size = 256,
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df_sec,
.unlock = spi_disable_blockprotect_at2x_global_unprotect_sec,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
/* The A suffix indicates 33MHz instead of 20MHz clock rate.
* All other properties seem to be the same.*/
.name = "AT25F1024(A)",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25F1024,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_62,
}
},
.printlock = spi_prettyprint_status_register_at25f,
.unlock = spi_disable_blockprotect_at25f,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25F2048",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25F2048,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_62,
}
},
.printlock = spi_prettyprint_status_register_at25f,
.unlock = spi_disable_blockprotect_at25f,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25F4096",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25F4096,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_62,
}
},
.printlock = spi_prettyprint_status_register_at25f4096,
/* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25F512",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25F512,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_62,
}
},
.printlock = spi_prettyprint_status_register_at25f,
.unlock = spi_disable_blockprotect_at25f,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25F512A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25F512A,
.total_size = 64,
.page_size = 128,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_at25f,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_62,
}
},
.printlock = spi_prettyprint_status_register_at25f512a,
/* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */
.unlock = spi_disable_blockprotect_at25f512a,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25F512B",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25F512B,
.total_size = 64,
.page_size = 256,
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_62,
}
},
.printlock = spi_prettyprint_status_register_at25f512b,
.unlock = spi_disable_blockprotect_at25f512b,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25FS010",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25FS010,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25fs010,
.unlock = spi_disable_blockprotect_at25fs010,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25FS040",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25FS040,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25fs040,
.unlock = spi_disable_blockprotect_at25fs040,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT25SF041",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25SF041,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2500, 3600},
},
{
.vendor = "Atmel",
.name = "AT25SF081",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25SF081,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "Atmel",
.name = "AT25SF161",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25SF161,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2500, 3600},
},
{
.vendor = "Atmel",
.name = "AT25SL128A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT25SL128A,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1700, 2000},
},
{
.vendor = "Atmel",
.name = "AT26DF041",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT26DF041,
.total_size = 512,
.page_size = 256,
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 2048} },
.block_erase = spi_block_erase_81,
}, {
.eraseblocks = { {2 * 1024, 256} },
.block_erase = spi_block_erase_50,
}, {
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}
},
.printlock = spi_prettyprint_status_register_plain,
/* Supports also an incompatible page write (of exactly 256 B) and an auto-erasing write. */
.write = spi_chip_write_1,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */
},
{
.vendor = "Atmel",
.name = "AT26DF081A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT26DF081A,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at26df081a,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT26DF161",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT26DF161,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at25df,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT26DF161A",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT26DF161A,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_at26df081a,
.unlock = spi_disable_blockprotect_at2x_global_unprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT26F004",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT26F004,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD},
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.write = NULL, /* Incompatible Page write */
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT29C010A",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT29C010A,
.total_size = 128,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = 10000, /* 10mS, Enter=Exec */
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec, /* FIXME */
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT29C020",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT29C020,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10000, /* 10ms */
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT29C040A",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT29C040A,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10000, /* 10 ms */
.block_erasers =
{
{
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT29C512",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT29C512,
.total_size = 64,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10000, /* 10mS, Enter=Exec */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT45CS1282",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45CS1282,
.total_size = 16896, /* No power of two sizes */
.page_size = 1056, /* No power of two sizes */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */
.feature_bits = FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1056, 1}, /* sector 0a: opcode 50h */
{248 * 1056, 1}, /* sector 0b: opcode 7Ch */
{256 * 1056, 63}, /* sectors 1 - 63: opcode 7Ch */
},
.block_erase = spi_erase_at45cs_sector,
}
},
.printlock = spi_prettyprint_status_register_plain,
.write = spi_write_at45db,
.read = spi_read_at45db,
.voltage = {2700, 3600},
.gran = write_gran_1056bytes,
},
{
.vendor = "Atmel",
.name = "AT45DB011D",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB011D,
.total_size = 128, /* or 132, determined from status register */
.page_size = 256, /* or 264, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 512} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 256, 512/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 256, 1},
{120 * 256, 1},
{128 * 256, 3},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db,
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT45DB021D",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB021D,
.total_size = 256, /* or 264, determined from status register */
.page_size = 256, /* or 264, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 1024} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 256, 1024/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 256, 1},
{120 * 256, 1},
{128 * 256, 7},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db,
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT45DB041D",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB041D,
.total_size = 512, /* or 528, determined from status register */
.page_size = 256, /* or 264, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 2048} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 256, 2048/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 256, 1},
{248 * 256, 1},
{256 * 256, 7},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db,
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */
},
{
.vendor = "Atmel",
.name = "AT45DB081D",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB081D,
.total_size = 1024, /* or 1056, determined from status register */
.page_size = 256, /* or 264, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 4096} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 256, 4096/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 256, 1},
{248 * 256, 1},
{256 * 256, 15},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db,
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */
},
{
.vendor = "Atmel",
.name = "AT45DB161D",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB161D,
.total_size = 2048, /* or 2112, determined from status register */
.page_size = 512, /* or 528, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 4096} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 512, 4096/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 512, 1},
{248 * 512, 1},
{256 * 512, 15},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db,
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */
},
{
.vendor = "Atmel",
.name = "AT45DB321C",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB321C,
.total_size = 4224, /* No power of two sizes */
.page_size = 528, /* No power of two sizes */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */
.feature_bits = FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {528, 8192} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 528, 8192/8} },
.block_erase = spi_erase_at45db_block,
}, /* Although the datasheets describes sectors (which can be write protected)
* there seems to be no erase functions for them.
{
.eraseblocks = {
{8 * 528, 1},
{120 * 528, 1},
{128 * 528, 63},
},
.block_erase = spi_erase_at45db_sector
}, */ {
.eraseblocks = { {4224 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db, /* Bit 0 is undefined, no lockdown */
.write = spi_write_at45db,
.read = spi_read_at45db_e8, /* 3 address and 4 dummy bytes */
.voltage = {2700, 3600},
.gran = write_gran_528bytes,
},
{
.vendor = "Atmel",
.name = "AT45DB321D",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB321D,
.total_size = 4096, /* or 4224, determined from status register */
.page_size = 512, /* or 528, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 8192} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 512, 8192/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 512, 1},
{120 * 512, 1},
{128 * 512, 63},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {4096 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db,
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */
},
{
.vendor = "Atmel",
.name = "AT45DB321E",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB321C,
.total_size = 4096, /* or 4224, determined from status register */
.page_size = 512, /* or 528, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 8192} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 512, 8192/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 512, 1},
{120 * 512, 1},
{128 * 512, 63},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {4096 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db, /* has a 2nd status register */
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2500, 3600}, /* 2.3-3.6V & 2.5-3.6V models available */
},
{
.vendor = "Atmel",
.name = "AT45DB642D",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT45DB642D,
.total_size = 8192, /* or 8448, determined from status register */
.page_size = 1024, /* or 1056, determined from status register */
/* does not support EWSR nor WREN and has no writable status register bits whatsoever */
/* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */
.feature_bits = FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_at45db,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {1024, 8192} },
.block_erase = spi_erase_at45db_page,
}, {
.eraseblocks = { {8 * 1024, 8192/8} },
.block_erase = spi_erase_at45db_block,
}, {
.eraseblocks = {
{8 * 1024, 1},
{248 * 1024, 1},
{256 * 1024, 31},
},
.block_erase = spi_erase_at45db_sector
}, {
.eraseblocks = { {8192 * 1024, 1} },
.block_erase = spi_erase_at45db_chip,
}
},
.printlock = spi_prettyprint_status_register_at45db,
.unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */
/* granularity will be set by the probing function. */
.write = spi_write_at45db,
.read = spi_read_at45db, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT49(H)F010",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49F010,
.total_size = 128,
.page_size = 0, /* unused */
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_at49f,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT49BV512",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49BV512,
.total_size = 64,
.page_size = 64,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Atmel",
.name = "AT49F002(N)",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49F002N,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{96 * 1024, 1},
{128 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT49F002(N)T",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49F002NT,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 1},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT49F020",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49F020,
.total_size = 256,
.page_size = 0, /* unused */
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
/* Chip features an optional permanent write protection
* of the first 8 kB. The erase function is the same as
* above, but 00000H to 01FFFH will not be erased.
* FIXME: add another eraser when partial erasers are
* supported.
*/
},
.printlock = printlock_at49f,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT49F040",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49F040,
.total_size = 512,
.page_size = 0, /* unused */
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
/* Chip features an optional permanent write protection
* of the first 16 kB. The erase function is the same as
* above, but 00000H to 03FFFH will not be erased.
* FIXME: add another eraser when partial erasers are
* supported.
*/
},
.printlock = printlock_at49f,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT49F080",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49F080,
.total_size = 1024,
.page_size = 0, /* unused */
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
/* Chip features an optional permanent write protection
* of the first 16 kB. The erase function is the same as
* above, but 00000H to 03FFFH will not be erased.
* FIXME: add another eraser when partial erasers are
* supported.
*/
},
.printlock = printlock_at49f,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
/* 'top' version of AT49F080. equal in all aspects but the boot block address */
.vendor = "Atmel",
.name = "AT49F080T",
.bustype = BUS_PARALLEL,
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49F080T,
.total_size = 1024,
.page_size = 0, /* unused */
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
/* Chip features an optional permanent write protection
* of the first 16 kB. The erase function is the same as
* above, but FC000H to FFFFFH will not be erased.
* FIXME: add another eraser when partial erasers are
* supported.
*/
},
.printlock = printlock_at49f,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Atmel",
.name = "AT49LH002",
.bustype = BUS_LPC | BUS_FWH, /* A/A Mux */
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49LH002,
.total_size = 256,
.page_size = 0, /* unused */
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = NULL, /* TODO: Implement. */
}, {
.eraseblocks = {
{64 * 1024, 4},
},
.block_erase = erase_block_82802ab,
},
},
.printlock = printlock_regspace2_block_eraser_0,
.unlock = unlock_regspace2_block_eraser_0,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Atmel",
.name = "AT49LH004",
.bustype = BUS_LPC | BUS_FWH, /* A/A Mux */
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49LH004,
.total_size = 512,
.page_size = 0, /* unused */
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
}, {
.eraseblocks = {
{64 * 1024, 8},
},
.block_erase = NULL, /* TODO: Implement. */
},
},
.printlock = printlock_regspace2_block_eraser_0,
.unlock = unlock_regspace2_block_eraser_0,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Atmel",
.name = "AT49LH00B4",
.bustype = BUS_LPC | BUS_FWH, /* A/A Mux */
.manufacture_id = ATMEL_ID,
.model_id = ATMEL_AT49LH00B4,
.total_size = 512,
.page_size = 0, /* unused */
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 2},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 7},
},
.block_erase = NULL, /* TODO: Implement. */
}, {
.eraseblocks = {
{64 * 1024, 8},
},
.block_erase = erase_block_82802ab,
},
},
.printlock = printlock_regspace2_block_eraser_0,
.unlock = unlock_regspace2_block_eraser_0,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Bright",
.name = "BM29F040",
.bustype = BUS_PARALLEL,
.manufacture_id = BRIGHT_ID,
.model_id = BRIGHT_BM29F040,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Catalyst",
.name = "CAT28F512",
.bustype = BUS_PARALLEL,
.manufacture_id = CATALYST_ID,
.model_id = CATALYST_CAT28F512,
.total_size = 64,
.page_size = 0, /* unused */
.feature_bits = 0,
.tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD},
.probe = probe_jedec, /* FIXME! */
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 1} },
.block_erase = NULL, /* TODO */
},
},
.write = NULL, /* TODO */
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "ENE",
.name = "KB9012 (EDI)",
.bustype = BUS_SPI,
.total_size = 128,
.page_size = 128,
.feature_bits = FEATURE_ERASED_ZERO,
.tested = TEST_OK_PREW,
.spi_cmd_set = SPI_EDI,
.probe = edi_probe_kb9012,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {128, 1024} },
.block_erase = edi_chip_block_erase,
},
},
.write = edi_chip_write,
.read = edi_chip_read,
.voltage = {2700, 3600},
.gran = write_gran_128bytes,
},
{
.vendor = "ESI",
.name = "ES25P16",
.bustype = BUS_SPI,
.manufacture_id = EXCEL_ID_NOPREFIX,
.model_id = EXCEL_ES25P16,
.total_size = 2 * 1024,
.page_size = 256,
/* 256-byte parameter page separate from memory array:
* supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast Read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "ESI",
.name = "ES25P40",
.bustype = BUS_SPI,
.manufacture_id = EXCEL_ID_NOPREFIX,
.model_id = EXCEL_ES25P40,
.total_size = 512,
.page_size = 256,
/* 256-byte parameter page separate from memory array:
* supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast Read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "ESI",
.name = "ES25P80",
.bustype = BUS_SPI,
.manufacture_id = EXCEL_ID_NOPREFIX,
.model_id = EXCEL_ES25P80,
.total_size = 1024,
.page_size = 256,
/* 256-byte parameter page separate from memory array:
* supports read (0x53), fast read (0x5B), erase (0xD5) and program (0x52) instructions. */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast Read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "ESMT",
.name = "F25L008A",
.bustype = BUS_SPI,
.manufacture_id = ESMT_ID,
.model_id = ESMT_F25L008A,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "ESMT",
.name = "F25L32PA",
.bustype = BUS_SPI,
.manufacture_id = ESMT_ID,
.model_id = ESMT_F25L32PA,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_bpl,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "ESMT",
.name = "F49B002UA",
.bustype = BUS_PARALLEL,
.manufacture_id = ESMT_ID,
.model_id = ESMT_F49B002UA,
.total_size = 256,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 1},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Eon",
.name = "EN25B05",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B05,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B05T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B05,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B10",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 3},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B10T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{32 * 1024, 3},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B16",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 31},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B16T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B20",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 3}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B20T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B32",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B32,
.total_size = 4096,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 63},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B32T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B32,
.total_size = 4096,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 63},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B40",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 7}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B40T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B64",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B64,
.total_size = 8192,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 127},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B64T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B64,
.total_size = 8192,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 127},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B80",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 2},
{8 * 1024, 1},
{16 * 1024, 1},
{32 * 1024, 1},
{64 * 1024, 15}
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25B80T",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 15},
{32 * 1024, 1},
{16 * 1024, 1},
{8 * 1024, 1},
{4 * 1024, 2},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F05",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F05,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F10",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F16",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F20",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F32",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F32,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F40",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F64",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F64,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25F80",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25F80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P05",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B05,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{32 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P10",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P16",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P20",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P32", /* Uniform version of EN25B32 */
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B32,
.total_size = 4096,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P40",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P64",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B64,
.total_size = 8192,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25P80",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25B80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25Q128",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25Q128,
.total_size = 16384,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
/* Note: EN25D16 is an evil twin which shares the model ID
but has different write protection capabilities */
.vendor = "Eon",
.name = "EN25Q16",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25Q16,
.total_size = 2048,
.page_size = 256,
/* OTP: D16 512B/Q16 128B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
/* not supported by Q16 version */
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25Q32(A/B)",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25Q32,
.total_size = 4096,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25Q40",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25Q40,
.total_size = 512,
.page_size = 256,
/* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25Q64",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25Q64,
.total_size = 8192,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25Q80(A)",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25Q80,
.total_size = 1024,
.page_size = 256,
/* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25QH128",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25QH128,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
/* OTP: 512B total; enter 0x3A */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25QH16",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25QH16,
.total_size = 2048,
.page_size = 256,
/* supports SFDP */
/* OTP: 512B total; enter 0x3A */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 2048, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 2048, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25QH32",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25QH32,
.total_size = 4096,
.page_size = 256,
/* supports SFDP */
/* OTP: 512B total; enter 0x3A */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 4096, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 4096, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25QH64",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25QH64,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 512B total; enter 0x3A */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 8192 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 8192 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN25S10",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25S10,
.total_size = 128,
.page_size = 256,
/* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Eon",
.name = "EN25S16",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25S16,
.total_size = 2048,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_en25s_wp,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Eon",
.name = "EN25S20",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25S20,
.total_size = 256,
.page_size = 256,
/* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Eon",
.name = "EN25S32",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25S32,
.total_size = 4096,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4096 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4096 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_en25s_wp,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Eon",
.name = "EN25S40",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25S40,
.total_size = 512,
.page_size = 256,
/* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Eon",
.name = "EN25S64",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25S64,
.total_size = 8192,
.page_size = 256,
/* OTP: 512B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8192 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8192 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_en25s_wp,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Eon",
.name = "EN25S80",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = EON_EN25S80,
.total_size = 1024,
.page_size = 256,
/* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Eon",
.name = "EN29F002(A)(N)B",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29F002B,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Eon",
.name = "EN29F002(A)(N)T",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29F002T,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Eon",
.name = "EN29F010",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29F010,
.total_size = 128,
.page_size = 128,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {16 * 1024, 8} },
.block_erase = erase_sector_jedec,
},
{
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Eon",
.name = "EN29GL064(A)B",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29GL064B,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 127},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN29GL064(A)T",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29GL064T,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 127},
{8 * 1024, 8},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN29GL064H/L",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29GL064HL,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN29GL128",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29GL128HL,
.total_size = 16384,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Eon",
.name = "EN29LV040(A)",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29LV040,
.total_size = 512,
.page_size = 4 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
},
{
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -45R and 55R, others 2.7-3.6V */
},
{
.vendor = "Eon",
.name = "EN29LV640B",
.bustype = BUS_PARALLEL,
.manufacture_id = EON_ID,
.model_id = EON_EN29LV640B,
.total_size = 8192,
.page_size = 8192,
.feature_bits = FEATURE_ADDR_SHIFTED,
.tested = TEST_OK_PREW,
.probe = probe_en29lv640b,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 127},
},
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_en29lv640b,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Fujitsu",
.name = "MBM29F004BC",
.bustype = BUS_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = FUJITSU_MBM29F004BC,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 7},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = NULL,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Fujitsu",
.name = "MBM29F004TC",
.bustype = BUS_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = FUJITSU_MBM29F004TC,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = NULL,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
/* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */
.vendor = "Fujitsu",
.name = "MBM29F400BC",
.bustype = BUS_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = FUJITSU_MBM29F400BC,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 7},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */
},
{
.vendor = "Fujitsu",
.name = "MBM29F400TC",
.bustype = BUS_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = FUJITSU_MBM29F400TC,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_AAA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */
},
{
.vendor = "Fujitsu",
.name = "MBM29LV160BE",
.bustype = BUS_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = FUJITSU_MBM29LV160BE,
.total_size = 2 * 1024,
.page_size = 0,
.feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 31},
},
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1, /* Supports a fast mode too */
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */
},
{
.vendor = "Fujitsu",
.name = "MBM29LV160TE",
.bustype = BUS_PARALLEL,
.manufacture_id = FUJITSU_ID,
.model_id = FUJITSU_MBM29LV160TE,
.total_size = 2 * 1024,
.page_size = 0,
.feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1, /* Supports a fast mode too */
.read = read_memmapped,
.voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */
},
{
.vendor = "GigaDevice",
.name = "GD25B128B/GD25Q128B",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q128,
.total_size = 16384,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25LQ128",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25LQ128,
.total_size = 16384,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1695, 1950},
},
{
.vendor = "GigaDevice",
.name = "GD25LQ16",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25LQ16,
.total_size = 2048,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1695, 1950},
},
{
.vendor = "GigaDevice",
.name = "GD25LQ32",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25LQ32,
.total_size = 4096,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1695, 1950},
},
{
.vendor = "GigaDevice",
.name = "GD25LQ40",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25LQ40,
.total_size = 512,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1695, 1950},
},
{
.vendor = "GigaDevice",
.name = "GD25LQ64(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25LQ64,
.total_size = 8192,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1695, 1950},
},
{
.vendor = "GigaDevice",
.name = "GD25LQ80",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25LQ80,
.total_size = 1024,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1695, 1950},
},
{
.vendor = "GigaDevice",
.name = "GD25Q10",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q128C",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q128,
.total_size = 16384,
.page_size = 256,
/* OTP: 1536B total; read 0x48; write 0x42, erase 0x44 */
/* QPI: enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: 2nd status reg (read 0x35, write 0x31) and 3rd status reg (read 0x15, write 0x11) */
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q16(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q16,
.total_size = 2048,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q20(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q32(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q32,
.total_size = 4096,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q40(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q512",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q512,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q64(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q64,
.total_size = 8192,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25Q80(B)",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25Q80,
.total_size = 1024,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25T80",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25T80,
.total_size = 1024,
.page_size = 256,
/* OTP: 256B total; enter 0x3A */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25VQ16C",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25VQ16C,
.total_size = 2 * 1024,
.page_size = 256,
/* Supports SFDP */
/* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25VQ21B",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25VQ21B,
.total_size = 256,
.page_size = 256,
/* OTP: 1536B total; read 0x48, write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25VQ40C",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25VQ41B,
.total_size = 512,
.page_size = 256,
/* Supports SFDP */
/* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25VQ41B",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25VQ41B,
.total_size = 512,
.page_size = 256,
/* OTP: 1536B total; read 0x48, write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "GigaDevice",
.name = "GD25VQ80C",
.bustype = BUS_SPI,
.manufacture_id = GIGADEVICE_ID,
.model_id = GIGADEVICE_GD25VQ80C,
.total_size = 1024,
.page_size = 256,
/* Supports SFDP */
/* OTP: 1024B total; read 0x48, write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { { 32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { { 64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp4_srwd,
.unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "Hyundai",
.name = "HY29F002B",
.bustype = BUS_PARALLEL,
.manufacture_id = HYUNDAI_ID,
.model_id = HYUNDAI_HY29F002B,
.total_size = 256,
.page_size = 256 * 1024,
.feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */
},
{
.vendor = "Hyundai",
.name = "HY29F002T",
.bustype = BUS_PARALLEL,
.manufacture_id = HYUNDAI_ID,
.model_id = HYUNDAI_HY29F002T,
.total_size = 256,
.page_size = 256 * 1024,
.feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */
},
{
.vendor = "Hyundai",
.name = "HY29F040A",
.bustype = BUS_PARALLEL,
.manufacture_id = HYUNDAI_ID,
.model_id = HYUNDAI_HY29F040A,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "ISSI",
.name = "IS25LP064",
.bustype = BUS_SPI,
.manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25LP064,
.total_size = 8192,
.page_size = 256,
/* OTP: 1024B total; read 0x48; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "ISSI",
.name = "IS25LP128",
.bustype = BUS_SPI,
.manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25LP128,
.total_size = 16384,
.page_size = 256,
/* OTP: 1024B total; read 0x48; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "ISSI",
.name = "IS25LP256",
.bustype = BUS_SPI,
.manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25LP256,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */
/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
/* could also use spi_block_erase_d7 */
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "ISSI",
.name = "IS25WP032",
.bustype = BUS_SPI,
.manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25WP032,
.total_size = 4096,
.page_size = 256,
/* OTP: 1024B total; read 0x48; write 0x42 */
/* QPI enable 0x35, disable 0xF5 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "ISSI",
.name = "IS25WP064",
.bustype = BUS_SPI,
.manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25WP064,
.total_size = 8192,
.page_size = 256,
/* OTP: 1024B total; read 0x48; write 0x42 */
/* QPI enable 0x35, disable 0xF5 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "ISSI",
.name = "IS25WP128",
.bustype = BUS_SPI,
.manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25WP128,
.total_size = 16384,
.page_size = 256,
/* OTP: 1024B total; read 0x48; write 0x42 */
/* QPI enable 0x35, disable 0xF5 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "ISSI",
.name = "IS25WP256",
.bustype = BUS_SPI,
.manufacture_id = ISSI_ID_SPI,
.model_id = ISSI_IS25WP256,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total; read 0x68; write 0x62, erase 0x64, read ID 0x4B */
/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA | FEATURE_4BA_ENTER_EAR7,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
/* could also use spi_block_erase_d7 */
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "ISSI",
.name = "IS29GL064B",
.bustype = BUS_PARALLEL,
.manufacture_id = ISSI_ID,
.model_id = ISSI_PMC_IS29GL064B,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 127},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "ISSI",
.name = "IS29GL064H/L",
.bustype = BUS_PARALLEL,
.manufacture_id = ISSI_ID,
.model_id = ISSI_PMC_IS29GL064HL,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "ISSI",
.name = "IS29GL064T",
.bustype = BUS_PARALLEL,
.manufacture_id = ISSI_ID,
.model_id = ISSI_PMC_IS29GL064T,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 127},
{8 * 1024, 8},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "ISSI",
.name = "IS29GL128H/L",
.bustype = BUS_PARALLEL,
.manufacture_id = ISSI_ID,
.model_id = ISSI_PMC_IS29GL128HL,
.total_size = 16384,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Intel",
.name = "25F160S33B8",
.bustype = BUS_SPI,
.manufacture_id = INTEL_ID,
.model_id = INTEL_25F160S33B8,
.total_size = 2048,
.page_size = 256,
/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 8 so-called "parameter blocks" with
* opcode 0x40. Trying to access an address outside these 8 8kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 31} // inaccessible
},
.block_erase = spi_block_erase_40,
}, { */
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd,
.unlock = spi_disable_blockprotect_bp2_ep_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* also fast read 0x0B */
.voltage = {2700, 3600},
},
{
.vendor = "Intel",
.name = "25F160S33T8",
.bustype = BUS_SPI,
.manufacture_id = INTEL_ID,
.model_id = INTEL_25F160S33T8,
.total_size = 2048,
.page_size = 256,
/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 8 so-called "parameter blocks" with
* opcode 0x40. Trying to access an address outside these 8 8kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{64 * 1024, 31}, // inaccessible
{8 * 1024, 8}
},
.block_erase = spi_block_erase_40,
}, { */
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd,
.unlock = spi_disable_blockprotect_bp2_ep_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* also fast read 0x0B */
.voltage = {2700, 3600},
},
{
.vendor = "Intel",
.name = "25F320S33B8",
.bustype = BUS_SPI,
.manufacture_id = INTEL_ID,
.model_id = INTEL_25F320S33B8,
.total_size = 4096,
.page_size = 256,
/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 8 so-called "parameter blocks" with
* opcode 0x40. Trying to access an address outside these 8 8kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 63} // inaccessible
},
.block_erase = spi_block_erase_40,
}, { */
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd,
.unlock = spi_disable_blockprotect_bp2_ep_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* also fast read 0x0B */
.voltage = {2700, 3600},
},
{
.vendor = "Intel",
.name = "25F320S33T8",
.bustype = BUS_SPI,
.manufacture_id = INTEL_ID,
.model_id = INTEL_25F320S33T8,
.total_size = 4096,
.page_size = 256,
/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 8 so-called "parameter blocks" with
* opcode 0x40. Trying to access an address outside these 8 8kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{64 * 1024, 63}, // inaccessible
{8 * 1024, 8}
},
.block_erase = spi_block_erase_40,
}, { */
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd,
.unlock = spi_disable_blockprotect_bp2_ep_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* also fast read 0x0B */
.voltage = {2700, 3600},
},
{
.vendor = "Intel",
.name = "25F640S33B8",
.bustype = BUS_SPI,
.manufacture_id = INTEL_ID,
.model_id = INTEL_25F640S33B8,
.total_size = 8192,
.page_size = 256,
/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 8 so-called "parameter blocks" with
* opcode 0x40. Trying to access an address outside these 8 8kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 127} // inaccessible
},
.block_erase = spi_block_erase_40,
}, { */
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd,
.unlock = spi_disable_blockprotect_bp2_ep_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* also fast read 0x0B */
.voltage = {2700, 3600},
},
{
.vendor = "Intel",
.name = "25F640S33T8",
.bustype = BUS_SPI,
.manufacture_id = INTEL_ID,
.model_id = INTEL_25F640S33T8,
.total_size = 8192,
.page_size = 256,
/* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 8 so-called "parameter blocks" with
* opcode 0x40. Trying to access an address outside these 8 8kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{64 * 1024, 127}, // inaccessible
{8 * 1024, 8}
},
.block_erase = spi_block_erase_40,
}, { */
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd,
.unlock = spi_disable_blockprotect_bp2_ep_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* also fast read 0x0B */
.voltage = {2700, 3600},
},
{
.vendor = "Intel",
.name = "28F001BN/BX-B",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F001B,
.total_size = 128,
.page_size = 128 * 1024, /* 8k + 2x4k + 112k */
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 1},
{4 * 1024, 2},
{112 * 1024, 1},
},
.block_erase = erase_block_82802ab,
},
},
.write = write_82802ab,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Intel",
.name = "28F001BN/BX-T",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F001T,
.total_size = 128,
.page_size = 128 * 1024, /* 112k + 2x4k + 8k */
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{112 * 1024, 1},
{4 * 1024, 2},
{8 * 1024, 1},
},
.block_erase = erase_block_82802ab,
},
},
.write = write_82802ab,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Intel",
.name = "28F002BC/BL/BV/BX-T",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F002T,
.total_size = 256,
.page_size = 256 * 1024,
.tested = TEST_OK_PRE,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 1},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
},
},
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "28F004B5/BE/BV/BX-B",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F004B,
.total_size = 512,
.page_size = 128 * 1024, /* maximal block size */
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{96 * 1024, 1},
{128 * 1024, 3},
},
.block_erase = erase_block_82802ab,
},
},
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "28F004B5/BE/BV/BX-T",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F004T,
.total_size = 512,
.page_size = 128 * 1024, /* maximal block size */
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 3},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
},
},
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "28F008S3/S5/SC",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F004S3,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
},
},
.unlock = unlock_28f004s5,
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "28F400BV/BX/CE/CV-B",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F400B,
.total_size = 512,
.page_size = 128 * 1024, /* maximal block size */
.feature_bits = FEATURE_ADDR_SHIFTED,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{96 * 1024, 1},
{128 * 1024, 3},
},
.block_erase = erase_block_82802ab,
},
},
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "28F400BV/BX/CE/CV-T",
.bustype = BUS_PARALLEL,
.manufacture_id = INTEL_ID,
.model_id = INTEL_28F400T,
.total_size = 512,
.page_size = 128 * 1024, /* maximal block size */
.feature_bits = FEATURE_ADDR_SHIFTED,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 3},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
},
},
.write = write_82802ab,
.read = read_memmapped,
},
{
.vendor = "Intel",
.name = "82802AB",
.bustype = BUS_FWH,
.manufacture_id = INTEL_ID,
.model_id = INTEL_82802AB,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
},
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Intel",
.name = "82802AC",
.bustype = BUS_FWH,
.manufacture_id = INTEL_ID,
.model_id = INTEL_82802AC,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PR,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
},
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Macronix",
.name = "MX23L12854",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX23L12854,
.total_size = 16384,
.page_size = 256,
.tested = {.probe = NT, .read = NT, .erase = NA, .write = NA},
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {3000, 3600},
},
{
.vendor = "Macronix",
.name = "MX23L1654",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX23L1654,
.total_size = 2048,
.page_size = 256,
.tested = {.probe = NT, .read = NT, .erase = NA, .write = NA},
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL, /* MX23L1654 is a mask ROM, so it is read-only */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {3000, 3600},
},
{
.vendor = "Macronix",
.name = "MX23L3254",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX23L3254,
.total_size = 4096,
.page_size = 256,
.tested = {.probe = OK, .read = OK, .erase = NA, .write = NA},
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL, /* MX23L3254 is a mask ROM, so it is read-only */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {3000, 3600},
},
{
.vendor = "Macronix",
.name = "MX23L6454",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX23L6454,
.total_size = 8192,
.page_size = 256,
.tested = {.probe = OK, .read = OK, .erase = NA, .write = NA},
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {3000, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L1005(C)/MX25L1006E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1005,
.total_size = 128,
.page_size = 256,
/* MX25L1006E supports SFDP */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported, MX25L1006E supports dual I/O */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L12805D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L12805D,
.total_size = 16384,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L12835F/MX25L12845E/MX25L12865E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L12805D,
.total_size = 16384,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L1605",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1605,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L1605A/MX25L1606E/MX25L1608E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1605,
.total_size = 2048,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E and MX25L1608E only) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported (MX25L1608E supports dual-I/O read) */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L1605D/MX25L1608D/MX25L1673E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1605,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode, for 73E is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L1635D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1635D,
.total_size = 2048,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L1635E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1635E,
.total_size = 2048,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L2005(C)/MX25L2006E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L2005,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L25635F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L25635F,
.total_size = 32768,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L3205(A)",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L3205,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L3205D/MX25L3208D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L3205,
.total_size = 4096,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L3206E/MX25L3208E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L3205,
.total_size = 4096,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L3235D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L3235D,
.total_size = 4096,
.page_size = 256,
/* OTP: 256B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L3273E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L3205,
.total_size = 4096,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L4005(A/C)/MX25L4006E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L4005,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L512(E)/MX25V512(C)",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L512,
.total_size = 64,
.page_size = 256,
/* MX25L512E supports SFDP */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */
.voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */
},
{
.vendor = "Macronix",
.name = "MX25L6405",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
/* Has an additional 512B EEPROM sector */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L6405D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
/* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L6406E/MX25L6408E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
/* MX25L6406E supports SFDP */
/* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E/MX25L6473F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L6495F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6495F,
.total_size = 8192,
.page_size = 256,
/* OTP: 1024B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L8005,
.total_size = 1024,
.page_size = 256,
/* MX25L8006E, MX25L8008E support SFDP */
/* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */
},
{
.vendor = "Macronix",
.name = "MX25R6435F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25R6435F,
.total_size = 8192,
.page_size = 256,
/* OTP: 1024B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 3600},
},
{
.vendor = "Macronix",
.name = "MX25U12835F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25U12835E,
.total_size = 16384,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 2000},
},
{
.vendor = "Macronix",
.name = "MX25U1635E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25U1635E,
.total_size = 2048,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
/* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PR,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 2000},
},
{
.vendor = "Macronix",
.name = "MX25U25635F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25U25635F,
.total_size = 32768,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI | FEATURE_4BA,
.tested = TEST_OK_PR,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 2000},
},
{
.vendor = "Macronix",
.name = "MX25U3235E/F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25U3235E,
.total_size = 4096,
.page_size = 256,
/* F model supports SFDP */
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
/* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 2000},
},
{
.vendor = "Macronix",
.name = "MX25U51245G",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25U51245G,
.total_size = 65536,
.page_size = 256,
/* OTP: 512B factory programmed and 512B customer programmed; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI | FEATURE_4BA,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2048} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 2048} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 2000},
},
{
.vendor = "Macronix",
.name = "MX25U6435E/F",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25U6435E,
.total_size = 8192,
.page_size = 256,
/* F model supports SFDP */
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
/* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 2000},
},
{
.vendor = "Macronix",
.name = "MX25U8032E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25U8032E,
.total_size = 1024,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1650, 2000},
},
{
.vendor = "Macronix",
.name = "MX29F001B",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29F001B,
.total_size = 128,
.page_size = 32 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 1},
{4 * 1024, 2},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Macronix",
.name = "MX29F001T",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29F001T,
.total_size = 128,
.page_size = 32 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 1},
{32 * 1024, 1},
{8 * 1024, 2},
{4 * 1024, 2},
{8 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Macronix",
.name = "MX29F002(N)B",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29F002B,
.total_size = 256,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Macronix",
.name = "MX29F002(N)T",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29F002T,
.total_size = 256,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Macronix",
.name = "MX29F022(N)B",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29F022B,
.total_size = 256,
.page_size = 0, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Macronix",
.name = "MX29F022(N)T",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29F022T,
.total_size = 256,
.page_size = 0, /* unused */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Macronix",
.name = "MX29F040",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29F040,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Macronix",
.name = "MX29GL128F",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29GL128F,
.total_size = 16384,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX29GL320EB",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29GL320EB,
.total_size = 4096,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 63},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX29GL320EH/L",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29GL320EHL,
.total_size = 4096,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX29GL320ET",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29GL320ET,
.total_size = 4096,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 63},
{8 * 1024, 8},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX29GL640EB",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29GL640EB,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 127},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX29GL640EH/L",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29GL640EHL,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX29GL640ET",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29GL640ET,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 127},
{8 * 1024, 8},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX29LV040",
.bustype = BUS_PARALLEL,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX29LV040,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
.name = "MX66L51235F/MX25L51245G",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX66L51235F,
.total_size = 65536,
.page_size = 256,
/* OTP: 512B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2048} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 2048} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
/* TODO: security register and SBLK/SBULK; MX25L12835F: configuration register */
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
/* The ST M25P05 is a bit of a problem. It has the same ID as the
* ST M25P05-A in RES mode, but supports only 128 byte writes instead
* of 256 byte writes. We rely heavily on the fact that probe_spi_res1
* only is successful if RDID does not work.
*/
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P05",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P05_RES,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_1, /* 128 */
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P05-A",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P05A,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
/* The ST M25P10 has the same problem as the M25P05. */
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P10",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P10_RES,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_1, /* 128 */
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P10-A",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P10A,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P128",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P128,
.total_size = 16384,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST", /* Numonyx */
.name = "M25P20",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P20-old",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P20_RES,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_res1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P32",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P32,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST", /* Numonyx */
.name = "M25P40",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P40-old",
.bustype = BUS_SPI,
.manufacture_id = 0, /* Not used. */
.model_id = ST_M25P40_RES,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res1,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P64",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P64,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25P80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25P80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE10",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE20",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE40",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PE80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PE80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX16,
.total_size = 2048,
.page_size = 256,
/* OTP: 64B total; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 512 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX32",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX32,
.total_size = 4096,
.page_size = 256,
/* OTP: 64B total; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PRE,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 1024 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX64",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX64,
.total_size = 8192,
.page_size = 256,
/* OTP: 64B total; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 2048 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M25PX80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M25PX80,
.total_size = 1024,
.page_size = 256,
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { { 4 * 1024, 256 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE10",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE10,
.total_size = 128,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 512} },
.block_erase = spi_block_erase_db,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}
},
.printlock = spi_prettyprint_status_register_default_welwip,
.unlock = NULL, /* #WP pin write-protects lower 64kB. */
.write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE16",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE16,
.total_size = 2048,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 8192} },
.block_erase = spi_block_erase_db,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}
},
.printlock = spi_prettyprint_status_register_default_welwip,
.unlock = NULL, /* #WP pin write-protects lower 64kB. */
.write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE20",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE20,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 1024} },
.block_erase = spi_block_erase_db,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}
},
.printlock = spi_prettyprint_status_register_default_welwip,
.unlock = NULL, /* #WP pin write-protects lower 64kB. */
.write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE40",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE40,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 2048} },
.block_erase = spi_block_erase_db,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}
},
.printlock = spi_prettyprint_status_register_default_welwip,
.unlock = NULL, /* #WP pin write-protects lower 64kB. */
.write = spi_chip_write_256, /* Page write supported (similar to PP but allows 0->1 changes) */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "M45PE80",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_M45PE80,
.total_size = 1024,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 4096} },
.block_erase = spi_block_erase_db,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}
},
.printlock = spi_prettyprint_status_register_default_welwip,
.unlock = NULL, /* #WP pin write-protects lower 64kB. */
.write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q016",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q016__1E,
.total_size = 2048,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q032..1E",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q032__1E,
.total_size = 4096,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q032..3E",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q032__3E,
.total_size = 4096,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q064__1E,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q064__3E,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q128__1E,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {1700, 2000},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q128__3E,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096 } },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q256..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q256__3E,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32768 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron/Numonyx/ST",
.name = "N25Q512..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q512__3E,
.total_size = 65536,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32768 * 1024, 2} },
.block_erase = spi_block_erase_c4,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron",
.name = "MT25QL256", /* L = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q256__3E,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32768 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}, {
.eraseblocks = { {32768 * 1024, 1} },
.block_erase = spi_block_erase_60,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Micron",
.name = "MT25QL512", /* L = 3V, uniform 64KB/4KB blocks/sectors */
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = ST_N25Q512__3E,
.total_size = 65536,
.page_size = 256,
/* supports SFDP */
/* OTP: 64B total; read 0x4B, write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 16384} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2048} },
.block_erase = spi_block_erase_5c,
}, {
.eraseblocks = { {32 * 1024, 2048} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 1024} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {65536 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}, {
.eraseblocks = { {65536 * 1024, 1} },
.block_erase = spi_block_erase_60,
}
},
.printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */
.unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "MoselVitelic",
.name = "V29C51000B",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = MVC_V29C51000B,
.total_size = 64,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "MoselVitelic",
.name = "V29C51000T",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = MVC_V29C51000T,
.total_size = 64,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "MoselVitelic",
.name = "V29C51400B",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = MVC_V29C51400B,
.total_size = 512,
.page_size = 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {1024, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "MoselVitelic",
.name = "V29C51400T",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = MVC_V29C51400T,
.total_size = 512,
.page_size = 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {1024, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "MoselVitelic",
.name = "V29LC51000",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = MVC_V29LC51000,
.total_size = 64,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "MoselVitelic",
.name = "V29LC51001",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = MVC_V29LC51001,
.total_size = 128,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 256} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "MoselVitelic",
.name = "V29LC51002",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = MVC_V29LC51002,
.total_size = 256,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {512, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Nantronics",
.name = "N25S10",
.bustype = BUS_SPI,
.manufacture_id = NANTRONICS_ID_NOPREFIX,
.model_id = NANTRONICS_N25S10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Nantronics",
.name = "N25S16",
.bustype = BUS_SPI,
.manufacture_id = NANTRONICS_ID_NOPREFIX,
.model_id = NANTRONICS_N25S16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Nantronics",
.name = "N25S20",
.bustype = BUS_SPI,
.manufacture_id = NANTRONICS_ID_NOPREFIX,
.model_id = NANTRONICS_N25S20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Nantronics",
.name = "N25S40",
.bustype = BUS_SPI,
.manufacture_id = NANTRONICS_ID_NOPREFIX,
.model_id = NANTRONICS_N25S40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Nantronics",
.name = "N25S80",
.bustype = BUS_SPI,
.manufacture_id = NANTRONICS_ID_NOPREFIX,
.model_id = NANTRONICS_N25S80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LD010(C)",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LD010,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
.voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */
},
{
.vendor = "PMC",
.name = "Pm25LD020(C)",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LD020,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
.voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */
},
{
.vendor = "PMC",
.name = "Pm25LD040(C)",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LV040,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
.voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */
},
{
.vendor = "PMC",
.name = "Pm25LD256C",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LD256C,
.total_size = 32,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 8} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 1} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LD512(C)",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LD512,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LQ016",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LQ016,
.total_size = 2048,
.page_size = 256,
/* OTP: 256B total; read 0x4B, write 0xB1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LQ020",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LQ020,
.total_size = 256,
.page_size = 256,
/* OTP: 256B total; read 0x4B, write 0xB1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LQ032C",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LQ032C,
.total_size = 4096,
.page_size = 256,
/* OTP: 64B total; read 0x4B, write 0xB1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4096 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4096 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LQ040",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LQ040,
.total_size = 512,
.page_size = 256,
/* OTP: 256B total; read 0x4B, write 0xB1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LQ080",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LQ080,
.total_size = 1024,
.page_size = 256,
/* OTP: 64B total; read 0x4B, write 0xB1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2300, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LV010",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM25LV010,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LV010A",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LV010,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LV016B",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LV016B,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LV020",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LV020,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LV040",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LV040,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LV080B",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = PMC_PM25LV080B,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm25LV512(A)",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM25LV512,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm29F002B",
.bustype = BUS_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM29F002B,
.total_size = 256,
.page_size = 8 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{96 * 1024, 1},
{128 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "PMC",
.name = "Pm29F002T",
.bustype = BUS_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM29F002T,
.total_size = 256,
.page_size = 8 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 1},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "PMC",
.name = "Pm39LV010",
.bustype = BUS_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */
.total_size = 128,
.page_size = 4096,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm39LV020",
.bustype = BUS_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM39LV020,
.total_size = 256,
.page_size = 4096,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm39LV040",
.bustype = BUS_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM39LV040,
.total_size = 512,
.page_size = 4096,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm39LV512",
.bustype = BUS_PARALLEL,
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM39LV512,
.total_size = 64,
.page_size = 4096,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "PMC",
.name = "Pm49FL002",
.bustype = BUS_LPC | BUS_FWH, /* A/A Mux */
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM49FL002,
.total_size = 256,
.page_size = 16 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024, 16} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.unlock = unlock_regspace2_uniform_32k,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "PMC",
.name = "Pm49FL004",
.bustype = BUS_LPC | BUS_FWH, /* A/A Mux */
.manufacture_id = PMC_ID_NOPREFIX,
.model_id = PMC_PM49FL004,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST25LF020A",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF020_REMS,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25LF040A",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF040_REMS,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* TODO: check */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
.read = spi_chip_read,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST25LF080(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF080_REMS,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_UNTESTED,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* TODO: check */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
.read = spi_chip_read,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST25VF010(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF010_REMS,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
.read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF016B",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF016B,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25vf016,
.unlock = spi_disable_blockprotect,
.write = spi_aai_write,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF020",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF020_REMS,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_UNTESTED,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
.read = spi_chip_read, /* only */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF020B",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF020B,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 and 2nd SR */
.unlock = spi_disable_blockprotect, /* FIXME: 2nd SR */
.write = spi_aai_write, /* AAI supported (0xAD) */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF032B",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF032B,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* TODO: check */
.unlock = spi_disable_blockprotect,
.write = spi_aai_write,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF040",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF040_REMS,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PR,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* TODO: check */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF040B",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF040B,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25vf040b,
.unlock = spi_disable_blockprotect,
.write = spi_aai_write, /* AAI supported (0xAD) */
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF040B.REMS",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF040B_REMS,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25vf040b,
.unlock = spi_disable_blockprotect,
.write = spi_aai_write,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF064C",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF064C,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* TODO: check */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF080B",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF080B,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* TODO: check */
.unlock = spi_disable_blockprotect,
.write = spi_aai_write,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25VF512(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25VF512_REMS,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EWSR,
.tested = TEST_OK_PREW,
.probe = probe_spi_rems,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */
.read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST25WF010",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25WF010,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {1024 * 128, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 128, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_aai_write,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST25WF020",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25WF020,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 256, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 256, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_aai_write,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST25WF020A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID, /* See flashchips.h */
.model_id = SST_SST25WF020A,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp2_tb_bpl,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST25WF040",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25WF040,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 512, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 512, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_aai_write,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST25WF040B",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID, /* See flashchips.h */
.model_id = SST_SST25WF040B,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp2_tb_bpl,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST25WF080",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25WF080,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_aai_write,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST25WF080B",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID, /* See flashchips.h */
.model_id = SST_SST25WF080B,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_bp2_tb_bpl,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST25WF512",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST25WF512,
.total_size = 64,
.page_size = 256,
.feature_bits = FEATURE_WRSR_EITHER,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 2} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {1024 * 64, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 64, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_aai_write,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {1650, 1950},
},
{
.vendor = "SST",
.name = "SST26VF016B(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST26VF016B,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = {
{8 * 1024, 4},
{32 * 1024, 1},
{64 * 1024, 30},
{32 * 1024, 1},
{8 * 1024, 4},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect_sst26_global_unprotect,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST26VF032B(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST26VF032B,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = {
{8 * 1024, 4},
{32 * 1024, 1},
{64 * 1024, 62},
{32 * 1024, 1},
{8 * 1024, 4},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect_sst26_global_unprotect,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST26VF064B(A)",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = SST_SST26VF064B,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = {
{8 * 1024, 4},
{32 * 1024, 1},
{64 * 1024, 126},
{32 * 1024, 1},
{8 * 1024, 4},
},
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
},
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect_sst26_global_unprotect,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST28SF040A",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST28SF040,
.total_size = 512,
.page_size = 256,
.feature_bits = 0,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst28sf040.c) */
.block_erasers =
{
{
.eraseblocks = { {128, 4096} },
.block_erase = erase_sector_28sf040,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_28sf040,
}
},
.unlock = unprotect_28sf040,
.write = write_28sf040,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SST",
.name = "SST29EE010",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST29EE010,
.total_size = 128,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SST",
.name = "SST29EE020A",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST29EE020A,
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SST",
.name = "SST29LE010",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST29LE010,
.total_size = 128,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST29LE020",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST29LE020,
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST39SF010A",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39SF010,
.total_size = 128,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SST",
.name = "SST39SF020A",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39SF020,
.total_size = 256,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SST",
.name = "SST39SF040",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39SF040,
.total_size = 512,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SST",
.name = "SST39SF512",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39SF512,
.total_size = 64,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SST",
.name = "SST39VF010",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39VF010,
.total_size = 128,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST39VF020",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39VF020,
.total_size = 256,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST39VF040",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39VF040,
.total_size = 512,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST39VF080",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39VF080,
.total_size = 1024,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST39VF512",
.bustype = BUS_PARALLEL,
.manufacture_id = SST_ID,
.model_id = SST_SST39VF512,
.total_size = 64,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "SST",
.name = "SST49LF002A/B",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_SST49LF002A,
.total_size = 256,
.page_size = 16 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024, 16} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */
}
},
.printlock = printlock_sst_fwhub,
.unlock = unlock_sst_fwhub,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF003A/B",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_SST49LF003A,
.total_size = 384,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 96} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 6} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {384 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */
}
},
.printlock = printlock_sst_fwhub,
.unlock = unlock_sst_fwhub,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
/* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB)
* and is only honored for 64k block erase, but not 4k sector erase.
*/
.vendor = "SST",
.name = "SST49LF004A/B",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_SST49LF004A,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */
},
},
.printlock = printlock_sst_fwhub,
.unlock = unlock_sst_fwhub,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF004C",
.bustype = BUS_FWH,
.manufacture_id = SST_ID,
.model_id = SST_SST49LF004C,
.total_size = 512,
.page_size = 4 * 1024,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_49lfxxxc,
}, {
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
}
},
.printlock = printlock_regspace2_block_eraser_1,
.unlock = unlock_regspace2_block_eraser_1,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF008A",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_SST49LF008A,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */
}
},
.printlock = printlock_sst_fwhub,
.unlock = unlock_sst_fwhub,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF008C",
.bustype = BUS_FWH,
.manufacture_id = SST_ID,
.model_id = SST_SST49LF008C,
.total_size = 1024,
.page_size = 4 * 1024,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = erase_sector_49lfxxxc,
}, {
.eraseblocks = {
{64 * 1024, 15},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
}
},
.printlock = printlock_regspace2_block_eraser_1,
.unlock = unlock_regspace2_block_eraser_1,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF016C",
.bustype = BUS_FWH,
.manufacture_id = SST_ID,
.model_id = SST_SST49LF016C,
.total_size = 2048,
.page_size = 4 * 1024,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = erase_sector_49lfxxxc,
}, {
.eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
}
},
.printlock = printlock_regspace2_block_eraser_1,
.unlock = unlock_regspace2_block_eraser_1,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF020",
.bustype = BUS_LPC,
.manufacture_id = SST_ID,
.model_id = SST_SST49LF020,
.total_size = 256,
.page_size = 16 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024, 16} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = NULL,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF020A",
.bustype = BUS_LPC,
.manufacture_id = SST_ID,
.model_id = SST_SST49LF020A,
.total_size = 256,
.page_size = 4 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PRE,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024, 16} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = NULL,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF040",
.bustype = BUS_LPC,
.manufacture_id = SST_ID,
.model_id = SST_SST49LF040,
.total_size = 512,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150 ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = NULL,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF040B",
.bustype = BUS_LPC, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_SST49LF040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 1, /* 150ns */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = NULL,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF080A",
.bustype = BUS_LPC, /* A/A Mux */
.manufacture_id = SST_ID,
.model_id = SST_SST49LF080A,
.total_size = 1024,
.page_size = 4096,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = NULL,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SST",
.name = "SST49LF160C",
.bustype = BUS_LPC,
.manufacture_id = SST_ID,
.model_id = SST_SST49LF160C,
.total_size = 2048,
.page_size = 4 * 1024,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PR,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = erase_sector_49lfxxxc,
}, {
.eraseblocks = {
{64 * 1024, 31},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
}
},
.printlock = printlock_regspace2_block_eraser_1,
.unlock = unlock_regspace2_block_eraser_1,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "ST",
.name = "M29F002B",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F002B,
.total_size = 256,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */
},
{
.vendor = "ST",
.name = "M29F002T/NT",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F002T,
.total_size = 256,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */
},
{
.vendor = "ST",
.name = "M29F040B",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* datasheet specifies no timing */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
/* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */
.vendor = "ST",
.name = "M29F400BB",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F400BB,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 7},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
/* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */
.vendor = "ST",
.name = "M29F400BT",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29F400BT,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 7},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "ST",
.name = "M29W010B",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29W010B,
.total_size = 128,
.page_size = 16 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {16 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "ST",
.name = "M29W040B",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29W040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "ST",
.name = "M29W512B",
.bustype = BUS_PARALLEL,
.manufacture_id = ST_ID,
.model_id = ST_M29W512B,
.total_size = 64,
.page_size = 64 * 1024,
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "ST",
.name = "M50FLW040A",
.bustype = BUS_FWH | BUS_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW040A,
.total_size = 512,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 16}, /* sector */
{64 * 1024, 5}, /* block */
{4 * 1024, 16}, /* sector */
{4 * 1024, 16}, /* sector */
},
.block_erase = erase_sector_stm50,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50FLW040B",
.bustype = BUS_FWH | BUS_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW040B,
.total_size = 512,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 16}, /* sector */
{4 * 1024, 16}, /* sector */
{64 * 1024, 5}, /* block */
{4 * 1024, 16}, /* sector */
},
.block_erase = erase_sector_stm50,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50FLW080A",
.bustype = BUS_FWH | BUS_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW080A,
.total_size = 1024,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PR,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 16}, /* sector */
{64 * 1024, 13}, /* block */
{4 * 1024, 16}, /* sector */
{4 * 1024, 16}, /* sector */
},
.block_erase = erase_sector_stm50,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
.printlock = printlock_regspace2_block_eraser_0,
.unlock = unlock_regspace2_block_eraser_0,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50FLW080B",
.bustype = BUS_FWH | BUS_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FLW080B,
.total_size = 1024,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_FIXME,
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 16}, /* sector */
{4 * 1024, 16}, /* sector */
{64 * 1024, 13}, /* block */
{4 * 1024, 16}, /* sector */
},
.block_erase = erase_sector_stm50,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
.printlock = printlock_regspace2_block_eraser_0,
.unlock = unlock_regspace2_block_eraser_0,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50FW002",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW002,
.total_size = 256,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PR,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = NULL, /* Only in A/A mux mode */
}
},
.printlock = printlock_regspace2_block_eraser_0,
.unlock = unlock_regspace2_block_eraser_0,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50FW016",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW016,
.total_size = 2048,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = erase_block_82802ab,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50FW040",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW040,
.total_size = 512,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PR,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_block_82802ab,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50FW080",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50FW080,
.total_size = 1024,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_OK_PR,
.probe = probe_82802ab,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50LPW080",
.bustype = BUS_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50LPW080,
.total_size = 1024,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_block_82802ab,
}
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "ST",
.name = "M50LPW116",
.bustype = BUS_LPC, /* A/A Mux */
.manufacture_id = ST_ID,
.model_id = ST_M50LPW116,
.total_size = 2048,
.page_size = 0,
.feature_bits = FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{4 * 1024, 16},
{64 * 1024, 30},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_block_82802ab,
}
},
.printlock = printlock_regspace2_block_eraser_0,
.unlock = unlock_regspace2_block_eraser_0,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program & erase */
},
{
.vendor = "Sanyo",
.name = "LE25FU106B",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FU106B,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
/* FIXME: Is this correct?
{
.eraseblocks = { {2 * 1024, 64} },
.block_erase = spi_block_erase_d7,
},*/
{
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect_bp1_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FU206",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FU206,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd,
.unlock = spi_disable_blockprotect_bp1_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FU206A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FU206A,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FU406B",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FU406B,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2300, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FU406C/LE25U40CMC",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FU406C,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual read (0x3B) and dual I/O (0xBB) supported */
.voltage = {2300, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FW106",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FW106,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {2 * 1024, 64} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {32 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */
.unlock = spi_disable_blockprotect_bp1_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FW203A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FW203A,
.total_size = 256,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 1024} },
.block_erase = spi_block_erase_db,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_default_welwip,
.unlock = NULL, /* #WP pin write-protects lower 64kB. */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FW403A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FW403A,
.total_size = 512,
.page_size = 256,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256, 2 * 1024} },
.block_erase = spi_block_erase_db,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_default_welwip,
.unlock = NULL, /* #WP pin write-protects lower 64kB. */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FW406A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FW406A,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain,
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FW418A",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FW418A,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */
.voltage = {2700, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FW806",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FW806,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Sanyo",
.name = "LE25FW808",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = SANYO_LE25FW808,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_res2,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {8 * 1024, 128} },
.block_erase = spi_block_erase_d7,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */
.voltage = {2700, 3600},
},
{
.vendor = "Sharp",
.name = "LH28F008BJT-BTLZ1",
.bustype = BUS_PARALLEL,
.manufacture_id = SHARP_ID,
.model_id = SHARP_LH28F008BJ__PB,
.total_size = 1024,
.page_size = 64 * 1024,
.tested = TEST_OK_PREW,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 15}
},
.block_erase = erase_block_82802ab,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_sector_49lfxxxc,
}
},
.unlock = unlock_lh28f008bjt,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Sharp",
.name = "LHF00L04",
.bustype = BUS_FWH, /* A/A Mux */
.manufacture_id = SHARP_ID,
.model_id = SHARP_LHF00L04,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP,
.tested = TEST_UNTESTED,
.probe = probe_82802ab,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 15},
{8 * 1024, 8}
},
.block_erase = erase_block_82802ab,
}, {
.eraseblocks = {
{1024 * 1024, 1}
},
.block_erase = NULL, /* 30 D0, only in A/A mux mode */
},
},
.unlock = unlock_regspace2_uniform_64k,
.write = write_82802ab,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL004A",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL004A,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL008A",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL008A,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PRE,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL016A",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL016A,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL032A/P",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL032A,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL064A/P",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL064A,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL116K/S25FL216K", /* FIXME: separate them */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL216,
.total_size = 2048,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 2048 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL127S-256kB", /* uniform 256kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 512,
/* supports 4B addressing */
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL127S-64kB", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 256,
/* supports 4B addressing */
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
/* FIXME: we should distinguish the configuration on probing time like we do for AT45DB chips */
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of 32 so-called "parameter sectors" with
* opcode 0x20 which may be configured to be on top or bottom of the address
* space. Trying to access an address outside these 4kB blocks does have no
* effect on the memory contents, e.g.
.eraseblocks = {
{4 * 1024, 32},
{64 * 1024, 254} // inaccessible
},
.block_erase = spi_block_erase_20,
}, { */
.eraseblocks = { { 64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL128P......0", /* uniform 64 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL128P......1", /* uniform 256kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd,
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 256,
/* supports 4B addressing */
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 32 so-called "parameter sectors" with
* opcode 0x20. Trying to access an address outside these 4kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{4 * 1024, 32},
{64 * 1024, 254} // inaccessible
},
.block_erase = spi_block_erase_20,
}, { */
.eraseblocks = { { 64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL128S......1", /* uniform 256 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 512,
/* supports 4B addressing */
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 256,
/* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with
* opcode 0x20. Trying to access an address outside these 4kB blocks does have no
* effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{4 * 1024, 32},
{64 * 1024, 254} // inaccessible
},
.block_erase = spi_block_erase_20,
}, { */
/* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs
.eraseblocks = {
{8 * 1024, 16},
{64 * 1024, 254} // inaccessible
},
.block_erase = spi_block_erase_40,
}, { */
.eraseblocks = { { 64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL129P......1", /* uniform 256 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
.total_size = 16384,
.page_size = 256,
/* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 16384 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */
.unlock = spi_disable_blockprotect_bp2_srwd,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL132K",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL132K,
.total_size = 4096,
.page_size = 256,
/* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 4096 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 4096 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */
.unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL164K",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL164K,
.total_size = 8192,
.page_size = 256,
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 8192 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 8192 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */
.unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL204K",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL204,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PR,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL208K",
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL208,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp3_srwd,
.unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Spansion",
.name = "S25FL256S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL256,
.total_size = 32768,
.page_size = 256,
/* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_EAR7,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
/* This chip supports erasing of the 32 so-called "parameter sectors" with
* opcode 0x20. Trying to access an address outside these 4kB blocks does
* have no effect on the memory contents, but sets a flag in the SR.
.eraseblocks = {
{4 * 1024, 32},
{64 * 1024, 254} // inaccessible
},
.block_erase = spi_block_erase_20,
}, { */
.eraseblocks = { { 64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { { 64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { { 32768 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { { 32768 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */
.unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
.wrea_override = 0x17,
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{F,S,V}29C51001B",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C51001B,
.total_size = 128,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {512, 256} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{F,S,V}29C51001T",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C51001T,
.total_size = 128,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {512, 256} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{F,S,V}29C51002B",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C51002B,
.total_size = 256,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {512, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{F,S,V}29C51002T",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C51002T,
.total_size = 256,
.page_size = 512,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {512, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{F,S,V}29C51004B",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C51004B,
.total_size = 512,
.page_size = 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {1024, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{F,S,V}29C51004T",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C51004T,
.total_size = 512,
.page_size = 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {1024, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{S,V}29C31004B",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C31004B,
.total_size = 512,
.page_size = 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {1024, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "SyncMOS/MoselVitelic",
.name = "{S,V}29C31004T",
.bustype = BUS_PARALLEL,
.manufacture_id = SYNCMOS_MVC_ID,
.model_id = SM_MVC_29C31004T,
.total_size = 512,
.page_size = 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = { {1024, 512} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "TI",
.name = "TMS29F002RB",
.bustype = BUS_PARALLEL,
.manufacture_id = TI_OLD_ID,
.model_id = TI_TMS29F002RB,
.total_size = 256,
.page_size = 16384, /* Non-uniform sectors */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{16 * 1024, 1},
{8 * 1024, 2},
{32 * 1024, 1},
{64 * 1024, 3},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "TI",
.name = "TMS29F002RT",
.bustype = BUS_PARALLEL,
.manufacture_id = TI_OLD_ID,
.model_id = TI_TMS29F002RT,
.total_size = 256,
.page_size = 16384, /* Non-uniform sectors */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Unknown",
.name = "SFDP-capable chip",
.bustype = BUS_SPI,
.manufacture_id = GENERIC_MANUF_ID,
.model_id = SFDP_DEVICE_ID,
.total_size = 0, /* set by probing function */
.page_size = 0, /* set by probing function */
.feature_bits = 0, /* set by probing function */
/* We present our own "report this" text hence we do not */
/* want the default "This flash part has status UNTESTED..." */
/* text to be printed. */
.tested = TEST_OK_PREW,
.probe = probe_spi_sfdp,
.block_erasers = {}, /* set by probing function */
.unlock = spi_disable_blockprotect, /* is this safe? */
.write = NULL, /* set by probing function */
.read = spi_chip_read,
/* FIXME: some vendor extensions define this */
.voltage = {0},
},
{
.vendor = "Winbond",
.name = "W25P16",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25P16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2048 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25P32",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25P32,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4096 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25P80",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25P80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q128.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q128_V,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q128.V..M",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q128_V_M,
.total_size = 16384,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q128.W",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q128_W,
.total_size = 16384,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 4096} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 512} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 256} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950},
},
{
.vendor = "Winbond",
.name = "W25Q16.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q16_V,
.total_size = 2048,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q16.W",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q16_W,
.total_size = 2048,
.page_size = 256,
/* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25Q20.W",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q20_W,
.total_size = 256,
.page_size = 256,
/* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25Q256.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q256_V,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA_ENTER_WREN
| FEATURE_4BA_EXT_ADDR | FEATURE_4BA_READ | FEATURE_4BA_FAST_READ,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q256JV_M",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q256JV_M,
.total_size = 32768,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* FOUR_BYTE_ADDR: supports 4-bytes addressing mode */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_4BA,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_21,
}, {
.eraseblocks = { {4 * 1024, 8192} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 1024} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_dc,
}, {
.eraseblocks = { {64 * 1024, 512} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {32 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q32.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q32_V,
.total_size = 4096,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q32.W",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q32_W,
.total_size = 4096,
.page_size = 256,
/* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25Q40.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q40_V,
.total_size = 512,
.page_size = 256,
/* supports SFDP */
/* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256, /* Multi I/O supported */
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q40BW",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q40BW,
.total_size = 512,
.page_size = 256,
/* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25Q40EW",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q40EW,
.total_size = 512,
.page_size = 256,
/* OTP: 3*256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25Q64.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q64_V,
.total_size = 8192,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q64.W",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q64_W,
.total_size = 8192,
.page_size = 256,
/* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
/* QPI enable 0x38, disable 0xFF */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25Q80.V",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q80_V,
.total_size = 1024,
.page_size = 256,
/* supports SFDP */
/* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25Q80BW",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q80BW,
.total_size = 1024,
.page_size = 256,
/* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25Q80EW",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25Q80EW,
.total_size = 1024,
.page_size = 256,
/* OTP: 3*256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 32} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {1 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {1650, 1950}, /* Fast read (0x0B) and multi I/O supported */
},
{
.vendor = "Winbond",
.name = "W25X10",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25X10,
.total_size = 128,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 2} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25X16",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25X16,
.total_size = 2048,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 512} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 64} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 32} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {2 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25X20",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25X20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25X32",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25X32,
.total_size = 4096,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 1024} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 128} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25X40",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25X40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25X64",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25X64,
.total_size = 8192,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 2048} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 256} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 128} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W25X80",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = WINBOND_NEX_W25X80,
.total_size = 1024,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 256} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {64 * 1024, 16} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
/* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */
{
.vendor = "Winbond",
.name = "W29C010(M)/W29C011A/W29EE011/W29EE012",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W29C010,
.total_size = 128,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10, /* used datasheet for the W29C011A */
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W29C010,
.total_size = 128,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PREW,
.probe = probe_w29ee011,
.probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
},
{
.vendor = "Winbond",
.name = "W29C020(C)/W29C022",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W29C020,
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Winbond",
.name = "W29C040/P",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W29C040,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Winbond",
.name = "W29C512A/W29EE512",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W29C512A,
.total_size = 64,
.page_size = 128,
.feature_bits = FEATURE_LONG_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Winbond",
.name = "W29GL032CB",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */
.model_id = WINBOND_W29GL032CB,
.total_size = 4096,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 63},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W29GL032CH/L",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */
.model_id = WINBOND_W29GL032CHL,
.total_size = 4096,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 64} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W29GL032CT",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */
.model_id = WINBOND_W29GL032CT,
.total_size = 4096,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 63},
{8 * 1024, 8},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {4 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W29GL064CB",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */
.model_id = WINBOND_W29GL064CB,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{8 * 1024, 8},
{64 * 1024, 127},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W29GL064CH/L",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */
.model_id = WINBOND_W29GL064CHL,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W29GL064CT",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */
.model_id = WINBOND_W29GL064CT,
.total_size = 8192,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 127},
{8 * 1024, 8},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {8 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W29GL128C",
.bustype = BUS_PARALLEL,
.manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */
.model_id = WINBOND_W29GL128CHL,
.total_size = 16384,
.page_size = 128 * 1024, /* actual page size is 16 */
.feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec_29gl,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {128 * 1024, 128} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {16 * 1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
},
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {2700, 3600},
},
{
.vendor = "Winbond",
.name = "W39F010",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39F010,
.total_size = 128,
.page_size = 4 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39f010,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Winbond",
.name = "W39L010",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39L010,
.total_size = 128,
.page_size = 4 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 32} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {128 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39l010,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39L020",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39L020,
.total_size = 256,
.page_size = 4 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39l020,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39L040",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39L040,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PR,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39l040,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39V040A",
.bustype = BUS_LPC,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V040A,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v040a,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39V040B",
.bustype = BUS_LPC,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v040b,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39V040C",
.bustype = BUS_LPC,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V040C,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v040c,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39V040FA",
.bustype = BUS_FWH,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V040FA,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = erase_block_jedec,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v040fa,
.unlock = unlock_regspace2_uniform_64k,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39V040FB",
.bustype = BUS_FWH,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V040B,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v040fb,
.unlock = unlock_regspace2_uniform_64k,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program */
},
{
.vendor = "Winbond",
.name = "W39V040FC",
.bustype = BUS_FWH,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V040C,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v040fc,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program */
},
{
.vendor = "Winbond",
.name = "W39V080A",
.bustype = BUS_LPC,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V080A,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v080a,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W39V080FA",
.bustype = BUS_FWH,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V080FA,
.total_size = 1024,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 16} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {1024 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v080fa,
.unlock = unlock_regspace2_uniform_64k,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program */
},
{
.vendor = "Winbond",
.name = "W39V080FA (dual mode)",
.bustype = BUS_FWH,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W39V080FA_DM,
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
.tested = TEST_UNTESTED,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {64 * 1024, 8} },
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.printlock = printlock_w39v080fa_dual,
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600}, /* Also has 12V fast program */
},
{
.vendor = "Winbond",
.name = "W49F002U/N",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W49F002U,
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = {
{128 * 1024, 1},
{96 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Winbond",
.name = "W49F020",
.bustype = BUS_PARALLEL,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W49F020,
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PROBE,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {4500, 5500},
},
{
.vendor = "Winbond",
.name = "W49V002A",
.bustype = BUS_LPC,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W49V002A,
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Winbond",
.name = "W49V002FA",
.bustype = BUS_FWH,
.manufacture_id = WINBOND_ID,
.model_id = WINBOND_W49V002FA,
.total_size = 256,
.page_size = 128,
.feature_bits = FEATURE_EITHER_RESET,
.tested = TEST_OK_PREW,
.probe = probe_jedec,
.probe_timing = 10,
.block_erasers =
{
{
.eraseblocks = {
{64 * 1024, 3},
{32 * 1024, 1},
{8 * 1024, 2},
{16 * 1024, 1},
},
.block_erase = erase_sector_jedec,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = erase_chip_block_jedec,
}
},
.write = write_jedec_1,
.read = read_memmapped,
.voltage = {3000, 3600},
},
{
.vendor = "Zetta Device",
.name = "ZD25D20",
.bustype = BUS_SPI,
.manufacture_id = ZETTADEVICE_ID,
.model_id = ZETTADEVICE_ZD25D20,
.total_size = 256,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 64} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 8} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 4} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {256 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Zetta Device",
.name = "ZD25D40",
.bustype = BUS_SPI,
.manufacture_id = ZETTADEVICE_ID,
.model_id = ZETTADEVICE_ZD25D40,
.total_size = 512,
.page_size = 256,
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_UNTESTED,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.block_erasers =
{
{
.eraseblocks = { {4 * 1024, 128} },
.block_erase = spi_block_erase_20,
}, {
.eraseblocks = { {32 * 1024, 16} },
.block_erase = spi_block_erase_52,
}, {
.eraseblocks = { {64 * 1024, 8} },
.block_erase = spi_block_erase_d8,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_60,
}, {
.eraseblocks = { {512 * 1024, 1} },
.block_erase = spi_block_erase_c7,
}
},
.printlock = spi_prettyprint_status_register_plain, /* TODO: improve */
.unlock = spi_disable_blockprotect,
.write = spi_chip_write_256,
.read = spi_chip_read,
.voltage = {2700, 3600},
},
{
.vendor = "Programmer",
.name = "Opaque flash chip",
.bustype = BUS_PROG,
.manufacture_id = PROGMANUF_ID,
.model_id = PROGDEV_ID,
.total_size = 0,
.page_size = 256,
/* probe is assumed to work, rest will be filled in by probe */
.tested = TEST_OK_PROBE,
.probe = probe_opaque,
/* eraseblock sizes will be set by the probing function */
.block_erasers =
{
{
.block_erase = erase_opaque,
}
},
.write = write_opaque,
.read = read_opaque,
},
{
.vendor = "AMIC",
.name = "unknown AMIC SPI chip",
.bustype = BUS_SPI,
.manufacture_id = AMIC_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid4,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "Atmel",
.name = "unknown Atmel SPI chip",
.bustype = BUS_SPI,
.manufacture_id = ATMEL_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "Eon",
.name = "unknown Eon SPI chip",
.bustype = BUS_SPI,
.manufacture_id = EON_ID_NOPREFIX,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "Macronix",
.name = "unknown Macronix SPI chip",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "PMC",
.name = "unknown PMC SPI chip",
.bustype = BUS_SPI,
.manufacture_id = PMC_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "SST",
.name = "unknown SST SPI chip",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "ST",
.name = "unknown ST SPI chip",
.bustype = BUS_SPI,
.manufacture_id = ST_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "Sanyo",
.name = "unknown Sanyo SPI chip",
.bustype = BUS_SPI,
.manufacture_id = SANYO_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "Winbond",
.name = "unknown Winbond (ex Nexcom) SPI chip",
.bustype = BUS_SPI,
.manufacture_id = WINBOND_NEX_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
.write = NULL,
.read = NULL,
},
{
.vendor = "Generic",
.name = "unknown SPI chip (RDID)",
.bustype = BUS_SPI,
.manufacture_id = GENERIC_MANUF_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rdid,
.write = NULL,
},
{
.vendor = "Generic",
.name = "unknown SPI chip (REMS)",
.bustype = BUS_SPI,
.manufacture_id = GENERIC_MANUF_ID,
.model_id = GENERIC_DEVICE_ID,
.total_size = 0,
.page_size = 256,
.tested = TEST_BAD_PREW,
.probe = probe_spi_rems,
.write = NULL,
},
{0}
};
const unsigned int flashchips_size = ARRAY_SIZE(flashchips);