| /* |
| * This file is part of the flashrom project. |
| * |
| * Copyright (C) 2000-2002 Alan Cox <alan@redhat.com> |
| * Copyright (C) 2002-2010 Jean Delvare <khali@linux-fr.org> |
| * Copyright (C) 2009,2010 Michael Karcher |
| * Copyright (C) 2011-2013 Stefan Tauner |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <strings.h> |
| #include <string.h> |
| #include <ctype.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| |
| #include "flash.h" |
| #include "programmer.h" |
| |
| #if defined(__i386__) || defined(__x86_64__) |
| |
| /* Enable SMBIOS decoding. Currently legacy DMI decoding is enough. */ |
| #define SM_SUPPORT 0 |
| |
| /* Strings longer than 4096 in DMI are just insane. */ |
| #define DMI_MAX_ANSWER_LEN 4096 |
| |
| int has_dmi_support = 0; |
| |
| static struct { |
| const char *const keyword; |
| const uint8_t type; |
| const uint8_t offset; |
| char *value; |
| } dmi_strings[] = { |
| { "system-manufacturer", 1, 0x04, NULL }, |
| { "system-product-name", 1, 0x05, NULL }, |
| { "system-version", 1, 0x06, NULL }, |
| { "baseboard-manufacturer", 2, 0x04, NULL }, |
| { "baseboard-product-name", 2, 0x05, NULL }, |
| { "baseboard-version", 2, 0x06, NULL }, |
| }; |
| |
| /* This list is used to identify supposed laptops. The is_laptop field has the |
| * following meaning: |
| * - 0: in all likelihood not a laptop |
| * - 1: in all likelihood a laptop |
| * - 2: chassis-type is not specific enough |
| * A full list of chassis types can be found in the System Management BIOS |
| * (SMBIOS) Reference Specification 2.7.0 section 7.4.1 "Chassis Types" at |
| * http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_2.7.0.pdf |
| * The types below are the most common ones. |
| */ |
| static const struct { |
| uint8_t type; |
| uint8_t is_laptop; |
| char *name; |
| } dmi_chassis_types[] = { |
| {0x01, 2, "Other"}, |
| {0x02, 2, "Unknown"}, |
| {0x03, 0, "Desktop"}, |
| {0x04, 0, "Low Profile Desktop"}, |
| {0x06, 0, "Mini Tower"}, |
| {0x07, 0, "Tower"}, |
| {0x08, 1, "Portable"}, |
| {0x09, 1, "Laptop"}, |
| {0x0a, 1, "Notebook"}, |
| {0x0b, 1, "Hand Held"}, |
| {0x0e, 1, "Sub Notebook"}, |
| {0x11, 0, "Main Server Chassis"}, |
| {0x17, 0, "Rack Mount Chassis"}, |
| {0x18, 0, "Sealed-case PC"}, /* used by Supermicro (X8SIE) */ |
| }; |
| |
| #if CONFIG_INTERNAL_DMI == 1 |
| #ifdef __DJGPP__ /* There is no strnlen in DJGPP. FIXME: Move this to a common utility file. */ |
| size_t strnlen(const char *str, size_t n) |
| { |
| size_t i; |
| for (i = 0; i < n && str[i] != '\0'; i++) |
| ; |
| return i; |
| } |
| #endif |
| |
| static bool dmi_checksum(const uint8_t * const buf, size_t len) |
| { |
| uint8_t sum = 0; |
| size_t a; |
| |
| for (a = 0; a < len; a++) |
| sum += buf[a]; |
| return (sum == 0); |
| } |
| |
| /** Retrieve a DMI string. |
| * |
| * See SMBIOS spec. section 6.1.3 "Text strings". |
| * The table will be unmapped ASAP, hence return a duplicated & sanitized string that needs to be freed later. |
| * |
| * \param buf the buffer to search through (usually appended directly to a DMI structure) |
| * \param string_id index of the string to look for |
| * \param limit pointer to the first byte beyond \em buf |
| */ |
| static char *dmi_string(const char *buf, uint8_t string_id, const char *limit) |
| { |
| size_t i, len; |
| |
| if (string_id == 0) |
| return "Not Specified"; |
| |
| while (string_id > 1 && string_id--) { |
| if (buf >= limit) { |
| msg_perr("DMI table is broken (string portion out of bounds)!\n"); |
| return "<OUT OF BOUNDS>"; |
| } |
| buf += strnlen(buf, limit - buf) + 1; |
| } |
| |
| if (!*buf) /* as long as the current byte we're on isn't null */ |
| return "<BAD INDEX>"; |
| |
| len = strnlen(buf, limit - buf); |
| char *newbuf = malloc(len + 1); |
| if (newbuf == NULL) { |
| msg_perr("Out of memory!\n"); |
| return NULL; |
| } |
| |
| /* fix junk bytes in the string */ |
| for (i = 0; i < len && buf[i] != '\0'; i++) { |
| if (isprint(buf[i])) |
| newbuf[i] = buf[i]; |
| else |
| newbuf[i] = ' '; |
| } |
| newbuf[i] = '\0'; |
| |
| return newbuf; |
| } |
| |
| static void dmi_chassis_type(uint8_t code) |
| { |
| int i; |
| code &= 0x7f; /* bits 6:0 are chassis type, 7th bit is the lock bit */ |
| is_laptop = 2; |
| for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { |
| if (code == dmi_chassis_types[i].type) { |
| msg_pdbg("DMI string chassis-type: \"%s\"\n", dmi_chassis_types[i].name); |
| is_laptop = dmi_chassis_types[i].is_laptop; |
| break; |
| } |
| } |
| } |
| |
| static void dmi_table(uint32_t base, uint16_t len, uint16_t num) |
| { |
| int i = 0, j = 0; |
| |
| uint8_t *dmi_table_mem = physmap_ro("DMI Table", base, len); |
| if (dmi_table_mem == NULL) { |
| msg_perr("Unable to access DMI Table\n"); |
| return; |
| } |
| |
| uint8_t *data = dmi_table_mem; |
| uint8_t *limit = dmi_table_mem + len; |
| |
| /* SMBIOS structure header is always 4 B long and contains: |
| * - uint8_t type; // see dmi_chassis_types's type |
| * - uint8_t length; // data section w/ header w/o strings |
| * - uint16_t handle; |
| */ |
| while (i < num && data + 4 < limit) { |
| /* - If a short entry is found (less than 4 bytes), not only it |
| * is invalid, but we cannot reliably locate the next entry. |
| * - If the length value indicates that this structure spreads |
| * accross the table border, something is fishy too. |
| * Better stop at this point, and let the user know his/her |
| * table is broken. |
| */ |
| if (data[1] < 4 || data + data[1] >= limit) { |
| msg_perr("DMI table is broken (bogus header)!\n"); |
| break; |
| } |
| |
| if(data[0] == 3) { |
| if (data + 5 < limit) |
| dmi_chassis_type(data[5]); |
| else /* the table is broken, but laptop detection is optional, hence continue. */ |
| msg_pwarn("DMI table is broken (chassis_type out of bounds)!\n"); |
| } else |
| for (j = 0; j < ARRAY_SIZE(dmi_strings); j++) { |
| uint8_t offset = dmi_strings[j].offset; |
| uint8_t type = dmi_strings[j].type; |
| |
| if (data[0] != type) |
| continue; |
| |
| if (data[1] <= offset || data + offset >= limit) { |
| msg_perr("DMI table is broken (offset out of bounds)!\n"); |
| goto out; |
| } |
| |
| dmi_strings[j].value = dmi_string((const char *)(data + data[1]), data[offset], |
| (const char *)limit); |
| } |
| /* Find next structure by skipping data and string sections */ |
| data += data[1]; |
| while (data + 1 <= limit) { |
| if (data[0] == 0 && data[1] == 0) |
| break; |
| data++; |
| } |
| data += 2; |
| i++; |
| } |
| out: |
| physunmap(dmi_table_mem, len); |
| } |
| |
| #if SM_SUPPORT |
| static int smbios_decode(uint8_t *buf) |
| { |
| /* TODO: other checks mentioned in the conformance guidelines? */ |
| if (!dmi_checksum(buf, buf[0x05]) || |
| (memcmp(buf + 0x10, "_DMI_", 5) != 0) || |
| !dmi_checksum(buf + 0x10, 0x0F)) |
| return 0; |
| |
| dmi_table(mmio_readl(buf + 0x18), mmio_readw(buf + 0x16), mmio_readw(buf + 0x1C)); |
| |
| return 1; |
| } |
| #endif |
| |
| static int legacy_decode(uint8_t *buf) |
| { |
| if (!dmi_checksum(buf, 0x0F)) |
| return 1; |
| |
| dmi_table(mmio_readl(buf + 0x08), mmio_readw(buf + 0x06), mmio_readw(buf + 0x0C)); |
| |
| return 0; |
| } |
| |
| int dmi_fill(void) |
| { |
| size_t fp; |
| uint8_t *dmi_mem; |
| int ret = 1; |
| |
| msg_pdbg("Using Internal DMI decoder.\n"); |
| /* There are two ways specified to gain access to the SMBIOS table: |
| * - EFI's configuration table contains a pointer to the SMBIOS table. On linux it can be obtained from |
| * sysfs. EFI's SMBIOS GUID is: {0xeb9d2d31,0x2d88,0x11d3,0x9a,0x16,0x0,0x90,0x27,0x3f,0xc1,0x4d} |
| * - Scanning physical memory address range 0x000F0000h to 0x000FFFFF for the anchor-string(s). */ |
| dmi_mem = physmap_ro("DMI", 0xF0000, 0x10000); |
| if (dmi_mem == ERROR_PTR) |
| return ret; |
| |
| for (fp = 0; fp <= 0xFFF0; fp += 16) { |
| #if SM_SUPPORT |
| if (memcmp(dmi_mem + fp, "_SM_", 4) == 0 && fp <= 0xFFE0) { |
| if (smbios_decode(dmi_mem + fp)) // FIXME: length check |
| goto out; |
| } else |
| #endif |
| if (memcmp(dmi_mem + fp, "_DMI_", 5) == 0) |
| if (legacy_decode(dmi_mem + fp) == 0) { |
| ret = 0; |
| goto out; |
| } |
| } |
| msg_pinfo("No DMI table found.\n"); |
| out: |
| physunmap(dmi_mem, 0x10000); |
| return ret; |
| } |
| |
| #else /* CONFIG_INTERNAL_DMI */ |
| |
| #define DMI_COMMAND_LEN_MAX 300 |
| static const char *dmidecode_command = "dmidecode"; |
| |
| static char *get_dmi_string(const char *string_name) |
| { |
| FILE *dmidecode_pipe; |
| char *result; |
| char answerbuf[DMI_MAX_ANSWER_LEN]; |
| char commandline[DMI_COMMAND_LEN_MAX]; |
| |
| snprintf(commandline, sizeof(commandline), |
| "%s -s %s", dmidecode_command, string_name); |
| dmidecode_pipe = popen(commandline, "r"); |
| if (!dmidecode_pipe) { |
| msg_perr("Opening DMI pipe failed!\n"); |
| return NULL; |
| } |
| |
| /* Kill lines starting with '#', as recent dmidecode versions |
| * have the quirk to emit a "# SMBIOS implementations newer..." |
| * message even on "-s" if the SMBIOS declares a |
| * newer-than-supported version number, while it *should* only print |
| * the requested string. |
| */ |
| do { |
| if (!fgets(answerbuf, DMI_MAX_ANSWER_LEN, dmidecode_pipe)) { |
| if (ferror(dmidecode_pipe)) { |
| msg_perr("DMI pipe read error\n"); |
| pclose(dmidecode_pipe); |
| return NULL; |
| } else { |
| answerbuf[0] = 0; /* Hit EOF */ |
| } |
| } |
| } while (answerbuf[0] == '#'); |
| |
| /* Discard all output exceeding DMI_MAX_ANSWER_LEN to prevent deadlock on pclose. */ |
| while (!feof(dmidecode_pipe)) |
| getc(dmidecode_pipe); |
| if (pclose(dmidecode_pipe) != 0) { |
| msg_pwarn("dmidecode execution unsuccessful - continuing without DMI info\n"); |
| return NULL; |
| } |
| |
| /* Chomp trailing newline. */ |
| if (answerbuf[0] != 0 && answerbuf[strlen(answerbuf) - 1] == '\n') |
| answerbuf[strlen(answerbuf) - 1] = 0; |
| |
| result = strdup(answerbuf); |
| if (result == NULL) |
| msg_pwarn("Warning: Out of memory - DMI support fails"); |
| |
| return result; |
| } |
| |
| int dmi_fill(void) |
| { |
| int i; |
| char *chassis_type; |
| |
| msg_pdbg("Using External DMI decoder.\n"); |
| for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { |
| dmi_strings[i].value = get_dmi_string(dmi_strings[i].keyword); |
| if (dmi_strings[i].value == NULL) |
| return 1; |
| } |
| |
| chassis_type = get_dmi_string("chassis-type"); |
| if (chassis_type == NULL) |
| return 0; /* chassis-type handling is optional anyway */ |
| |
| msg_pdbg("DMI string chassis-type: \"%s\"\n", chassis_type); |
| is_laptop = 2; |
| for (i = 0; i < ARRAY_SIZE(dmi_chassis_types); i++) { |
| if (strcasecmp(chassis_type, dmi_chassis_types[i].name) == 0) { |
| is_laptop = dmi_chassis_types[i].is_laptop; |
| break; |
| } |
| } |
| free(chassis_type); |
| return 0; |
| } |
| |
| #endif /* CONFIG_INTERNAL_DMI */ |
| |
| static int dmi_shutdown(void *data) |
| { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { |
| free(dmi_strings[i].value); |
| dmi_strings[i].value = NULL; |
| } |
| return 0; |
| } |
| |
| void dmi_init(void) |
| { |
| /* Register shutdown function before we allocate anything. */ |
| if (register_shutdown(dmi_shutdown, NULL)) { |
| msg_pwarn("Warning: Could not register DMI shutdown function - continuing without DMI info.\n"); |
| return; |
| } |
| |
| /* dmi_fill fills the dmi_strings array, and if possible sets the global is_laptop variable. */ |
| if (dmi_fill() != 0) |
| return; |
| |
| switch (is_laptop) { |
| case 1: |
| msg_pdbg("Laptop detected via DMI.\n"); |
| break; |
| case 2: |
| msg_pdbg("DMI chassis-type is not specific enough.\n"); |
| break; |
| } |
| |
| has_dmi_support = 1; |
| int i; |
| for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { |
| msg_pdbg("DMI string %s: \"%s\"\n", dmi_strings[i].keyword, |
| (dmi_strings[i].value == NULL) ? "" : dmi_strings[i].value); |
| } |
| } |
| |
| /** |
| * Does an substring/prefix/postfix/whole-string match. |
| * |
| * The pattern is matched as-is. The only metacharacters supported are '^' |
| * at the beginning and '$' at the end. So you can look for "^prefix", |
| * "suffix$", "substring" or "^complete string$". |
| * |
| * @param value The non-NULL string to check. |
| * @param pattern The non-NULL pattern. |
| * @return Nonzero if pattern matches. |
| */ |
| static int dmi_compare(const char *value, const char *pattern) |
| { |
| int anchored = 0; |
| int patternlen; |
| |
| msg_pspew("matching %s against %s\n", value, pattern); |
| /* The empty string is part of all strings! */ |
| if (pattern[0] == 0) |
| return 1; |
| |
| if (pattern[0] == '^') { |
| anchored = 1; |
| pattern++; |
| } |
| |
| patternlen = strlen(pattern); |
| if (pattern[patternlen - 1] == '$') { |
| int valuelen = strlen(value); |
| patternlen--; |
| if (patternlen > valuelen) |
| return 0; |
| |
| /* full string match: require same length */ |
| if (anchored && (valuelen != patternlen)) |
| return 0; |
| |
| /* start character to make ends match */ |
| value += valuelen - patternlen; |
| anchored = 1; |
| } |
| |
| if (anchored) |
| return strncmp(value, pattern, patternlen) == 0; |
| else |
| return strstr(value, pattern) != NULL; |
| } |
| |
| int dmi_match(const char *pattern) |
| { |
| int i; |
| |
| if (!has_dmi_support) |
| return 0; |
| |
| for (i = 0; i < ARRAY_SIZE(dmi_strings); i++) { |
| if (dmi_strings[i].value == NULL) |
| continue; |
| |
| if (dmi_compare(dmi_strings[i].value, pattern)) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| #endif // defined(__i386__) || defined(__x86_64__) |