)]}'
{
  "log": [
    {
      "commit": "605660bb2180acc07aad4ac11da2b28d6192d7b0",
      "tree": "d1440b51ab228b826b92326f8aecad506b9460fd",
      "parents": [
        "0dadb674cc98974378ccceccc8c557197a2bad16"
      ],
      "author": {
        "name": "Tim Wawrzynczak",
        "email": "twawrzynczak@chromium.org",
        "time": "Wed Jun 08 12:48:19 2022 -0600"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon May 29 19:22:30 2023 +0000"
      },
      "message": "gma: Begin Tiger Lake (TGL) integration\n\nTiger Lake\u0027s integrated graphics engine is built off an entirely new\nigfx architecture named \"Iris Xe\". This patch adds just enough support\nto compile for Tiger Lake. Fortunately, the backlight programming\nhasn\u0027t changed since SKL, so with a little bit of hacking, one can\nalso have libgfxinit turn on the backlight to verify something is\nworking and running.\n\nThe first pass through the support will focus mostly on the eDP panel,\nthen Type-C ports (both in fixed/native mode [DP/HDMI] and in Type-C\nDP Alt Mode). TBT will not be mostly ignored in this first pass, as\nit is not as widely used (yet?) as the other protocols.\n\nThis patch includes changes to fix ironlake gnatprove errors caused by\nthe new PCH_HDMI_A port definition.\n\nTested on google/voxel, with DEBUG_ADA_CODE enabled.\nTested on google/skolas, with DEBUG_ADA_CODE enabled.\n\nThis patch leaves the following unresolved gnatprove errors:\n- hw-gfx-gma-port_detect.ads:17:14:\n     warning: subprogram \"Initialize\" has no effect\n- hw-gfx-gma-port_detect.ads:20:07:\n     warning: unused variable \"Port\"\n- hw-gfx-gma-port_detect.ads:23:14:\n     warning: subprogram \"Clear_Hotplug_Detect\" has no effect\n- hw-gfx-gma-connectors.ads:39:14:\n     warning: subprogram \"Post_Off\" has no effect\n- hw-gfx-gma-connectors.ads:42:14:\n     warning: subprogram \"Post_All_Off\" has no effect\n\nThese errors will by addressed by the proper implementation of these\nprocedures.\n\nChange-Id: I84f15837856ecc5ec8df18b39d3989885cd550d4\nSigned-off-by: Tim Wawrzynczak \u003ctwawrzynczak@chromium.org\u003e\nSigned-off-by: Jeremy Compostella \u003cjeremy.compostella@intel.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/70887\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Sean Rhodes \u003csean@starlabs.systems\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "2bbd6e7c6044d7c3fb5607834d00e4e7d83a2ada",
      "tree": "9d39e3333feda6885ff63692c935e4ac114fb3a3",
      "parents": [
        "8a6e7bd43caef134bcb9616da9be3b4344850123"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Jan 07 18:22:59 2020 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Mar 05 15:12:18 2020 +0000"
      },
      "message": "gma panel: Introduce `Panel_Control` type\n\nFor now, `Panel_Control` only distinguishes `Panel_1` from `No_Panel`,\ni.e. if a port has a panel attached or not. To ease future addition of\nsupport for more than one panel, we already add loops and arrays around\nit, though.\n\nWith the information, if a port has a panel attached, in `Port_Config`,\nwe can pass that on into Panel.* procedures and let those decide what\nto do (e.g. do nothing if no panel is attached).\n\nChange-Id: I83864bc86b48f65d9ba43e083b805ca09497cbb0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/38243\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n"
    },
    {
      "commit": "f6a2d18329c7183ebfe90ea38852defed2d4e2bf",
      "tree": "d0ab034df3f86fa1a25a0d776c5a7e0b162b3562",
      "parents": [
        "6c10d367eb169cc3f07053785fd000b382874672"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Oct 01 10:37:49 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 06 14:39:48 2019 +0000"
      },
      "message": "gma ilk: Handle Ibex Peak DP correctly\n\nWe missed some bits specific to Ibex Peak DPs. Namely, the training\npattern selection moved and we have to select the transcoder in the\n`DP_CTL` register as there is no separate DP transcoder register.\n\nThe latter is quirky, however. If a port (DP or HDMI) is disabled\nwith the second transcoder selected. This selection sticks and the\nsibling port (e.g. DP2 to HDMI2) can\u0027t be enabled with the first\ntranscoder. As a workaround, we are supposed to enable a port that\nwas using the second transcoder with the first transcoder selected\nagain.\n\nChange-Id: I0c1fafc2ba113aeeaf4ace750b333cc270bca37c\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35740\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n"
    },
    {
      "commit": "60d0e5f9f62fe082c3884e1d2795385fe343a98e",
      "tree": "6a98fd9ff3f0f265932a19cdaaee35ca826c2f06",
      "parents": [
        "e87d0d1e2b0dc8d53a16eb2a16bdac7de44e1b28"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 17:08:27 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 03 13:01:30 2018 +0000"
      },
      "message": "gma: Add Pipe_Index to the Connectors.Post_On method\n\nOn GMCH targets the Pipe index needs to be programmed in the output\nregister.\n\nChange-Id: I6a614a9359c95adb59a1b6d0e34febe302fcfbf8\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25410\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "3a0e2a08f5489f3bb5c6e9f97b903e6e10c31a6c",
      "tree": "b8cb4de27f1fad5e9e49ef515c2f190213db0bba",
      "parents": [
        "8540805c2900f3f7b40dfc2c520d66c96368e0f7"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Jul 19 14:41:46 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed Aug 30 15:14:08 2017 +0000"
      },
      "message": "gma skl: Disable DDI clocks on reset path\n\nAfter reset DPLL_CTRL2 is initialized to 0. Which means some clock\ndisable bits are not set and might cause some hassle later. Set them\nand close the related TODO.\n\nChange-Id: I1a470dff55e317e8119906b3e397f6f2314abcbd\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20648\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "0923b795fe51df4431061fa8b44d975aa8027f52",
      "tree": "d6fef218da29151f483b9ae1eb7fb4f86bab6f5f",
      "parents": [
        "fb4f8ce26a05c2304367c066b806519941658373"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jun 09 15:28:41 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:14:32 2017 +0000"
      },
      "message": "gma-connectors: Add Initialize() procedure\n\nChange-Id: I62946152da9a93b881e0b0ea4b2679086ec8e970\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20128\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Matt DeVillier \u003cmatt.devillier@gmail.com\u003e\n"
    },
    {
      "commit": "6e327c9bc1aff9b0fca91de7517fdfc5f14562ed",
      "tree": "c98eb2b9b61481804bd83dcf57bdb244002c0fd2",
      "parents": [
        "7ad2d6569640f2f18b736fbf372ffb9aea5bed27"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Dec 21 14:45:45 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Mar 06 14:57:44 2017 +0100"
      },
      "message": "gma: Get rid of Get_Pipe_Hint()\n\nNow that we call it `Pipe_Index` passing that around makes more sense.\n\nChange-Id: I59460274860dc5d135662aa978acc1603b510eb6\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17932\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "7892ff6aa8c54910db3b33d82c7b552fe06b5b06",
      "tree": "1f3ab7c7337c4d95b1a7db93e04bdd2ceeaba70b",
      "parents": [
        "6f9a50dbaef0e3a36711b4348c58bc249e2cb486"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Nov 21 23:26:00 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 01 17:38:59 2017 +0100"
      },
      "message": "gma ironlake: Reorder panel power handling\n\nThe panel power sequencer sometimes waits very long without an expli-\ncable cause. We can however skip waiting for the panel power sequence\nif we\u0027re already done with the configuration.\n\nThis fixes a sporadic, useless delay of about 130ms on the T420.\n\nChange-Id: I27bf9b8bbae8a7447cde7ea4b88231b1707698b3\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17760\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "125a29e84242900a5556e8a068227e59420c3e1c",
      "tree": "925c85a1e9a5dc0506c9ccd26cd8ba4e05dd3d33",
      "parents": [
        "be4eaddc67ee3a11b1222db049cd8830491363d9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Oct 18 00:23:54 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 20 13:05:15 2016 +0200"
      },
      "message": "Relicense libgfxinit under GPL v2+\n\nChange-Id: I5d683dda83d23e89955a4d840b5570bd8642834a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17052\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}