)]}'
{
  "log": [
    {
      "commit": "f361ec81e075b3ece15fcb910ec4c96758ce33c2",
      "tree": "f6b0b643a65dc06c822b41fe0cb34e796e02d1fe",
      "parents": [
        "958c5640456afc695e4b05a9a23df3ada14ebdd2"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 02 18:01:45 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 03 20:37:04 2018 +0000"
      },
      "message": "gma: Introduce Pipe_Config.Scaler_Available()\n\nG45 provides only a single panel fitter. Therefore, we can only enable\na single pipe that requires scaling. Scaler_Available() tells us if a\npanel fitter is available for a given pipe. We use the result to filter\ninvalid configurations early.\n\nChange-Id: Ie05bfb58318e79edc8ab81598458e620ffdcb2ab\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/26768\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "ab69e3613b9e2593395d5b8e7aa928de60c6e45b",
      "tree": "7df2b8cf96284cf62e21f26bc486dddb4a4e7c56",
      "parents": [
        "a63e833af622028e1f7ddf4543f9960a7875a456"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue May 29 21:20:30 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 03 20:34:10 2018 +0000"
      },
      "message": "gma ironlake..broadwell: Enable X-tiling\n\nGenerations pre Skylake support X-tiling only.\n\nChange-Id: I828e20e2a6bf71c88cf9e23ada0552e2462fe7c1\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/26697\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "73ea03245445527a80b70e41cf4a910371014ca0",
      "tree": "210fafb8ff5631b2946bdd4511271293b2f8a27c",
      "parents": [
        "d5198445517c361b30f4521e52b953d2a7928a70"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 17:17:07 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 03 20:33:18 2018 +0000"
      },
      "message": "gma: Add G45 support\n\nThe following ports are implemented: HDMI/DVI, VGA, LVDS and DP.\n\nTested with gfx_test and coreboot on a Thinkpad X200 (GM45).\n\nChange-Id: Ifc05a1516329a61772af84558e5bfceb4d4ca277\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/21295\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "cbbaade460c23a04d4f9641e0e92afae9ddd12ec",
      "tree": "7fdb2f58f11fe4bbb6c007971d83d064baeb431d",
      "parents": [
        "b4b72794bab8523128befdb4bf4266b79413332a"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jan 02 13:59:36 2018 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue May 29 14:37:04 2018 +0000"
      },
      "message": "gma config_helpers: Pass only the modeline to Validate_Config()\n\nValidate_Config() had the full `Port_Config` as parameter, though we\nonly accessed the modeline. Make that explicit so we can also call it\nwhen we don\u0027t have the full config available.\n\nChange-Id: Ia4620d1ffa1a3cd098d721d84f2453f2dc19da2a\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/23163\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "9b479412a7e43888f52840e03b57eed710e46af6",
      "tree": "327ed066e30f61d7a284bb787a29c34a8332bd47",
      "parents": [
        "b7470499e80e1910ff078a55ac46a097b7f0c903"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Aug 27 11:55:56 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:26:37 2017 +0000"
      },
      "message": "gma: Add support for rotated framebuffers\n\nAs for the tiling, we enable support for rotated framebuffers on\nplatforms with Plane_Control. On every path where a rotated frame-\nbuffer may be expected, we have to exchange width and height in\ncase of 90 degree rotations. Beside the rotation setting itself,\nthe hardware needs to know the vertical stride instead of the hori-\nzontal and a delicate page mapping in case of 90 degree rotations.\nFor that we divide the GTT space into two, the lower half contains\nthe linear mappings, the upper half mappings for a rotated scanout.\n\nChange-Id: I1c901b7abc0fe7764bee87f6fda58ba9fa3f340d\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/22711\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "0164b024a6b6cff64c41c3b68fd93a925753f38d",
      "tree": "02ebcb40b55ce672a3a093e712eddbf8863f811d",
      "parents": [
        "b03c8f19ae0d7e1f9f27ff258e72a37dfb87f323"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Aug 24 15:12:51 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:26:03 2017 +0000"
      },
      "message": "gma: Set tiled framebuffers up through Plane_Control\n\nOn platforms with Plane_Control registers (Broxton/Skylake+) we can\nuse X and Y tiled framebuffers for scanout (older platforms support\nX tiling only). As our main use case is 90° rotation with Y tiled\nframebuffers, we implement it for the newer platforms only for now.\n\nWe also set up a fence register for linear access to the tiled frame-\nbuffer through the aperture.\n\nChange-Id: I913c82f62fd28b681a06ce13f41160a07e559799\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/22709\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "02cfbb3df00cd346877a258e2ee54f78ae0e0e16",
      "tree": "b0a54d58866812f343967b3e84e60b6b2d4e4697",
      "parents": [
        "d6d6f6b366a94a1fa9dfa1bb49dcb99d2ca505f7"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jan 09 17:41:18 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Feb 14 12:49:15 2017 +0100"
      },
      "message": "gma: Choose FDI-link settings after mode determination\n\nWe chose the FDI-link settings too early, before we even set the\nmode\u0027s BPC in case the default for an output should be selected.\n\nThis resulted in a too small lane count for the FDI in corner cases.\n\nChange-Id: I12c6465c296bda4b7af116bd5a4c3d2ce593a3ac\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18115\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "d6d6f6b366a94a1fa9dfa1bb49dcb99d2ca505f7",
      "tree": "3efa5abe3a5371bc31484b7a63bed30faf34562e",
      "parents": [
        "793a8d49affaaba2a3ef725fd0202ebaff37c888"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Dec 23 13:00:49 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 08 17:07:19 2017 +0100"
      },
      "message": "gma config: Fix framebuffer alignment check\n\nThe framebuffer stride has to be aligned to one cacheline (i.e.\n64 bytes) and not to 64 pixels.\n\nChange-Id: I8016b6c03b7908aff3ae72601d8d68cba065c7a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17957\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Ronald G. Minnich \u003crminnich@gmail.com\u003e\n"
    },
    {
      "commit": "8c45bcfc4d024c866e4c2b92b1768b413ec8be9c",
      "tree": "dfcfa082dcf1ab6dc31ccf9a50a9ed4a08c8539c",
      "parents": [
        "3c544eeb50590b2bbc69f04725b279ec96a4b2fa"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 17:30:57 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jan 01 17:36:07 2017 +0100"
      },
      "message": "gma: Split out config derivation and port probing\n\nThe GMA package has grown way too big. Move derivation of the internal\nconfiguration into new package `Config_Helpers`, EDID probing into new\npackage `Display_Probing`.\n\nChange-Id: Ib49ac7b00367be4295d18dba3afd1a0692e0497f\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17757\nReviewed-by: Adrian-Ken Rueegsegger \u003cken@codelabs.ch\u003e\n"
    }
  ]
}