)]}'
{
  "log": [
    {
      "commit": "312433cd3d90ebd5ee44bc1795b10e3846c1f96c",
      "tree": "b9797382071153359c87386163f70bdfbd074da0",
      "parents": [
        "82ca09f1f372200046dad13db6e81829ff067caf"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Sep 28 03:15:48 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Oct 04 21:34:26 2019 +0000"
      },
      "message": "gma pcode: Move and revise mailbox handling\n\nUnify the PCODE mailbox implementations (Linux\u0027 i915 uses the same\nimplementation since Sandy Bridge, too) and add `Wait` and `Success`\nparameters so we can act correctly if something failed. This adds\na lot of boilerplate. But we keep it contained in the new package\n`PCode` and the code outside it looks cleaner and handles errors\nmore gracefully.\n\nIn GNATprove, we track state of the mailbox\u0027 readiness in a ghost\nvariable `Mailbox_Ready`. This allows us to skip the initial wait\nloop if we know that we already waited at the end of a previous\ncall. The first call to a mailbox procedure has to be made with\n`Wait_Ready \u003d\u003e True`.\n\nAlso, start to experiment with a `use` clause for the `Register`\npackage. It allows us to write a little more condensed code, with-\nout sacrificing much (in this program we can expect that `Read`/\n`Write` means register access?) So far it looks good?\n\nChange-Id: I5daa3effb7ab774e4a35bd8794b0f67f57e4caa4\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35710\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n"
    },
    {
      "commit": "db68441c979d4f3623a0fb6b906683955ff95c66",
      "tree": "c186ebb4b913c5a1fe1036aa19d28795123b074a",
      "parents": [
        "57bebc7110c4f097135f523e8e68af056248e4a7"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 04 22:44:58 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed Jun 13 08:59:35 2018 +0000"
      },
      "message": "gma skylake power/clocks: Refactor to allow proof without inlining\n\nChange-Id: Ie660c69377d8624a3a6662c6ccb7b5e4efcd4629\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/26847\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "d1988d1a033d4d12b48cbc6640984ef3b143fd30",
      "tree": "9ece798e34f1a48a6cff2bbf3dd14208de0a564f",
      "parents": [
        "7628493a7e7acaba93d607db008a59ec8fa8eebe"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 16:27:57 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 03 12:59:42 2018 +0000"
      },
      "message": "gma: Make Raw_Clock a variable\n\nOn GMCH the Raw_Clock depends on the FSB frequency.\n\nChange-Id: I11af9ecb3504983ba1d3136c1b82bd14363afdba\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25403\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "8540805c2900f3f7b40dfc2c520d66c96368e0f7",
      "tree": "882c8116647ed9d43aef29f20bb76a66a08b2c96",
      "parents": [
        "234e772f4266412a56266067a40163f4dea7a2db"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Jul 19 14:14:34 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed Aug 30 15:14:01 2017 +0000"
      },
      "message": "gma skl: Prevent race by late timeout check\n\nWe initialize the timeout variable before the first event on the other\nside (i.e. us sending a request to PCODE). With very slow debug output\nsending the request itself might take longer than the timeout period.\n\nReorder the code to check the timeout condition only after the first\ntry and thereby make sure that we always try at least twice. Also issue\na debug message in case we timed out.\n\nChange-Id: I8cdeb3e36d7eafbef8a1a8e13670f3f9838a2f38\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20647\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "0d454cde12f33a67528c1343bfda7e37b37e7559",
      "tree": "60e8b70525f9bb4770e4129b8112bcc78c89a485",
      "parents": [
        "99f10f30d15c287ed8e27159a1a4350a1228bc51"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Nov 21 13:33:43 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:58:07 2016 +0100"
      },
      "message": "gma: Rename ports Digital[123] \u003d\u003e HDMI[123]\n\nBefore we had DP support, Digital just meant HDMI or DVI, but now it\u0027s\npretty confusing. Rename them to HDMI as it supersedes DVI.\n\nChange-Id: Ie8b4c60ac60040aa5c725ffc9cd06aa164391756\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17750\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "99f10f30d15c287ed8e27159a1a4350a1228bc51",
      "tree": "e1831c8087faec3cc34cd82f54ba01f23d6d5dfd",
      "parents": [
        "43cf8d5b120bda9a3ecbec5dd4cfa479818d32b6"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Nov 20 00:34:05 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 13 22:57:51 2016 +0100"
      },
      "message": "gma: Rename Config_Type \u003d\u003e Pipe_Config\n\nThis was long overdue. Originally, we only had one type of `confi-\nguration` but those times are over. Thus, rename `Config_Type` to\n`Pipe_Config` along with `Configs_Type` to `Pipe_Configs` and\n`Config_Index` to `Pipe_Index` to give them more meaningful names.\n\nChange-Id: Ic02c738f51b01a883e05eff1c94f9c2d6058fdc4\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/17749\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "125a29e84242900a5556e8a068227e59420c3e1c",
      "tree": "925c85a1e9a5dc0506c9ccd26cd8ba4e05dd3d33",
      "parents": [
        "be4eaddc67ee3a11b1222db049cd8830491363d9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Oct 18 00:23:54 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 20 13:05:15 2016 +0200"
      },
      "message": "Relicense libgfxinit under GPL v2+\n\nChange-Id: I5d683dda83d23e89955a4d840b5570bd8642834a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17052\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}