)]}'
{
  "log": [
    {
      "commit": "b47a5c479358a4cecf2589295b37954edd1e36e5",
      "tree": "8a84cb4ae9f3f8384e233c61eeb1de6c32b3d423",
      "parents": [
        "07ff1b95bb1db12cc3d01e3f542338d25eb2dbf3"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Sep 29 00:07:21 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Oct 18 12:19:16 2019 +0000"
      },
      "message": "gma g45: Read CDClk and calculate dot-clock limits\n\nNumbers are taken from `intel_cdclk.c` of Linux\u0027 i915 driver.\n\nWe introduce three new procedures to the `Power_And_Clocks` interface:\n\n  o Limit_Dotclocks() limits the dot clocks of all pipe configs\n    according to the maximum supported CDClk. It also reports if\n    CDClk has to be switched for these configs.\n\n  o Update_CDClk() performs the CDClk switch if necessary. It may\n    further limit the dot clocks if the switch didn\u0027t succeed.\n\n  o Enable_CDClk() ensures that the CDClk is running. This may be\n    necessary to probe for DP displays when no pipes are active.\n\nThe latter two are no-ops for G45, as the CDClk runs at a fixed rate.\nDot clocks are limited to 90% of CDClk.\n\nChange-Id: Ie50c0f8f51b3a0a6ed58c6461069c556cc92f51e\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35715\nReviewed-by: Matt DeVillier \u003cmatt.devillier@gmail.com\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "e317e9c31cef31f960a5cfb3e3247047d39ae7a1",
      "tree": "e995dd0feb54d1897d5e02b068d0838deb1ee493",
      "parents": [
        "c5c66ecf12c51600a20aac257394fd7f13d25113"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Sep 29 03:03:18 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Oct 04 22:18:44 2019 +0000"
      },
      "message": "gma: Merge `Config_State` into `State`\n\nTreating `Config_State` separately was merely cosmetic and caused\nlots of trouble. Its usage depends heavily on the selected plat-\nform. Hence, `Global` contracts were not stable across different\nconfigurations.\n\nLet\u0027s avoid the annotation mess that it brought us and merge it\ninto `State`.\n\nChange-Id: Ie28ccfc7ffbe08e0b3fe343d9e6df2420611834e\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35713\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "82ca09f1f372200046dad13db6e81829ff067caf",
      "tree": "3c79c77693b5502fe3ad2ebaeef1e99a09ca0077",
      "parents": [
        "efa3ca82eb7fc4e5717015022013d441b156c7a5"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Sep 28 02:37:50 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 03 20:07:40 2019 +0000"
      },
      "message": "gma registers: Implement `Success` parameter for Wait*()\n\nChange-Id: Ia0e30e3467400e9d53a32c9bfc97d2d5f00df4aa\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35709\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "75a707f3ef80fb150fc0c3fdb69d7cb7c21480f6",
      "tree": "a7c6acef5bd209e8d94f43905df7ecb167ccca48",
      "parents": [
        "d8282b6330f053d298c6aec660ed95018dbfe31c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Jun 18 16:28:33 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Sep 02 10:09:31 2019 +0000"
      },
      "message": "gma pipe setup: Fix secondary pipe cursors \u003c\u003d Sandy Bridge\n\nThe secondary cursor registers used to have a different offset.\n\nChange-Id: I4d79f59a8cb693d73d6da666525f091021efb4fd\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/27154\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-by: Reto Buerki \u003creet@codelabs.ch\u003e\n"
    },
    {
      "commit": "adfe11fec3f2fcca99be6b43bf4d33eb4aaf99d7",
      "tree": "73275a1b5fe36a9a1a562c89dbf042c8e324a067",
      "parents": [
        "d9365613ea1dd31ae00bc69ebd2f7a508049b2c6"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 10 14:59:04 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed May 08 13:16:10 2019 +0000"
      },
      "message": "gma config: Make Config.CPU and Config.CPU_Var variable\n\nIntroduce CONFIG_GFX_GMA_DYN_CPU that, if set to `y`, makes `Config.CPU`\nand `Config.CPU_Var` variables. All other config values derived from\nthese are turned into expression functions.\n\nChange-Id: If409b5afbd975f3a42e28ff191a092f89ece5ae2\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/27068\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "ceda17dd7676889bc6f0ddae6f4cd2e51b5500d2",
      "tree": "a0ae1a855dcab5069ce58ba1fea5f75b5c1d311c",
      "parents": [
        "0b2329afa562657d351ef1f6864688c1a8560ce8"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 09 22:00:29 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon May 06 21:57:01 2019 +0000"
      },
      "message": "gma registers: Add Read_GTT() procedure\n\nChange-Id: I0f8091b8958d0c228430fad4b8343fc362a2dbb7\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/27057\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "0b2329afa562657d351ef1f6864688c1a8560ce8",
      "tree": "5e5f21c2b541a3bde8a3ca54087bbf33bf23a1f3",
      "parents": [
        "d0d8b79a7e25d5b9bfe67359e27de71ab954a2a3"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 09 21:14:27 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon May 06 21:53:19 2019 +0000"
      },
      "message": "gma registers: Separate 32- and 64-bit GTT access\n\nWith Broadwell the GTT layout changed significantly. Before, we had a\n2MiB GTT with 32-bit entries. Now, it\u0027s a 8MiB GTT with 64-bit entries.\nWe used to abstract over that with configuration constants but that\u0027s\ninfeasible if we want to support Haswell and Broadwell with a single\nbinary (boards that support both processors exist).\n\nTherefore, declare both GTT variants and decide based on the CPU which\none to use.\n\nChange-Id: Ib6f21b71c434a9cbdd5cdfa3697da2b2e86750f4\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/27056\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "4dc4c61a4ab4e1903b97fc52c0c3809fa43cda56",
      "tree": "6fdfa11c1dfb2d8f45971c5685a5e097e708a759",
      "parents": [
        "a02b2c699b736a97773c2e8ca17aa2886a72131c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Jan 10 15:55:09 2018 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 03 20:33:48 2018 +0000"
      },
      "message": "gma: Configure cursor plane\n\nProgramming the cursor plane registers is straight forward.\n\nOn newer hardware, we also have to account for the cursor in GPU\ninternal buffer allocation. Fortunately, we have enough resources\nfor a static configuration that always accounts for a cursor.\n\nCursors with a location that is off limits are placed off-screen\nin the top-left corner, hence, are invisible.\n\nChange-Id: I08ffd81d524e14e464af6e6f6fb5effbd4890d8a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/23204\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "73ea03245445527a80b70e41cf4a910371014ca0",
      "tree": "210fafb8ff5631b2946bdd4511271293b2f8a27c",
      "parents": [
        "d5198445517c361b30f4521e52b953d2a7928a70"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 17:17:07 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 03 20:33:18 2018 +0000"
      },
      "message": "gma: Add G45 support\n\nThe following ports are implemented: HDMI/DVI, VGA, LVDS and DP.\n\nTested with gfx_test and coreboot on a Thinkpad X200 (GM45).\n\nChange-Id: Ifc05a1516329a61772af84558e5bfceb4d4ca277\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/21295\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "d5198445517c361b30f4521e52b953d2a7928a70",
      "tree": "8a17ba1ffbf11ed5982b5ea162da16223fe7d68a",
      "parents": [
        "fdb0df1d8d82101eeba70cc64016e41834dfa6a5"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 17:05:12 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue May 29 14:39:02 2018 +0000"
      },
      "message": "gma: Add flag to set up GMCH Panel Fitter\n\nSetting up the panel fitter for a second Pipe is omitted in order for\nthe configuration for the first pipe to remain valid. It is currently\nunknown how the system would behave in such situation.\n\nChange-Id: I4949fbb5356bd244d3d6f3eec71847b6e683079a\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25409\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "e87d0d1e2b0dc8d53a16eb2a16bdac7de44e1b28",
      "tree": "1a0ce865768db16dd66c51ba0adceee94ad49e77",
      "parents": [
        "5d08a93cb9ebe2a411561dd9c635f7a066e2b5d1"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 17:02:49 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 03 13:00:30 2018 +0000"
      },
      "message": "gma: Add flag to use GMCH PP registers\n\nChange-Id: Ia94af6340bdf329328f265fb9424224c1ab5f45f\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25408\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "636390ca01e7ecd6c53c1db60a6b97685bb5483e",
      "tree": "2eab6ba0ee7d4b9b225e16dac3c9dfc0915e5453",
      "parents": [
        "229ed1c7bfb6c372b6247a6be6f002066feaf43e"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 16:52:13 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 03 13:00:19 2018 +0000"
      },
      "message": "gma: Add a flag to use GMCH transcoder registers\n\nChange-Id: Ic9bff918bdcab3c5c55316cb6de1a8a8bf1c6430\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25406\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "229ed1c7bfb6c372b6247a6be6f002066feaf43e",
      "tree": "41d80973d6c09e9bd83471a27c1280194f92e595",
      "parents": [
        "dfcdd77f8e9b7c499a7a89de7d0d4dc29a3fc91f"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 16:45:43 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 03 12:59:55 2018 +0000"
      },
      "message": "gma: Add flag to use GMCH GMBUS registers\n\nChange-Id: Id5d115c7a4711f634171e6e163439ebab4ee6076\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25405\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "dfcdd77f8e9b7c499a7a89de7d0d4dc29a3fc91f",
      "tree": "39f91b5bd83d011d369ef305d9348452a7bd5869",
      "parents": [
        "d1988d1a033d4d12b48cbc6640984ef3b143fd30"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 16:42:50 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 03 12:59:46 2018 +0000"
      },
      "message": "gma: Add flag to allow use of VGACNTRL on GMCH\n\nChange-Id: If2f12f14b4f367cdfc8cc2c20402f2350e3bbba8\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25404\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "b03c8f19ae0d7e1f9f27ff258e72a37dfb87f323",
      "tree": "4406950a9497d0683687521c760430a02d907663",
      "parents": [
        "51375ad75a99d395f3843e46783c0743b5fea29b"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Aug 25 13:29:08 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:25:56 2017 +0000"
      },
      "message": "gma registers: Add procedures to set fence registers\n\nThrough fence registers, we can tell the hardware which parts of the\naperture cover tiled framebuffers. Only legacy X and Y tiling is sup-\nported. According to `i915_reg.h` there are 16 fence registers from\nG4x on and 32 from Ivy Bridge on (this only partially matches docu-\nmentation: Haswell has 16 regs documented and the fence registers\nwere not documented at all before).\n\nChange-Id: I02edc99b315e24dc175c6f93aff627e59cb1ff0b\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/22708\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "17d64b6d0195109623b136493a9c7380008743d3",
      "tree": "c6b0267cc9d3c2ba26d3136baec8dbd54678488a",
      "parents": [
        "2b6f6992188460bbb10ce2838a981ddc37141755"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jul 15 20:51:25 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Aug 21 10:56:43 2017 +0000"
      },
      "message": "gma: Clear \"fence\" registers during initialization\n\nThese registers are used to mark certain GTT regions as tiled.\n\nChange-Id: Ic2cd61c0c1b42990ed955d7f77a428a2b9dbabd5\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20601\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "2b6f6992188460bbb10ce2838a981ddc37141755",
      "tree": "e744d7d06e1414a4d089fd6f7c2849ea15286045",
      "parents": [
        "b8ae61876b8ddbf788f2168c87c8fce8dbaad0e3"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jul 09 18:11:34 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Aug 21 10:56:15 2017 +0000"
      },
      "message": "gma: Add a HW.PCI.Dev for dynamic MMIO setup\n\nRemove `MMIO_Base` option from Initialize() and try to derive it\nusing libhwbase\u0027 PCI mechanism instead.\n\nChange-Id: Iacd4d098954bb96c1c6b40fdfb2636191d9517c7\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20600\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "b8ae61876b8ddbf788f2168c87c8fce8dbaad0e3",
      "tree": "44a2d4bce1cb8d7bd1fafdf90e048d47eac6e8a6",
      "parents": [
        "fda2d6eaef548a193cc70fc2c2dd0dbeb649951e"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jul 15 20:03:56 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Aug 21 10:54:09 2017 +0000"
      },
      "message": "gma: Move GTT constants into GMA.Config\n\nChange-Id: Ie4b017f26b658c1818f90701089ce5d3171e4953\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20599\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "58afc202b1b29898f68f239ec7e50ac532b5d46c",
      "tree": "bce198ed9feb3b08fdb1412531e0867c139976ad",
      "parents": [
        "18ff0c13b740f4153f39dfeb5b9af474bfa13e0a"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 21:34:55 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:23:59 2017 +0000"
      },
      "message": "gma skl: Add I_boost configuration\n\nHardcoded to 1 since we don\u0027t support Skylake-Y (ULX).\n\nChange-Id: I22fa056531cac18828c867f9c9f5745ec424d38c\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20168\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "01b680ff020b1bcc9e5d8a864affd47bac75488b",
      "tree": "7800b9c5ed6c760e2f7f81335b17b94c66d9e09f",
      "parents": [
        "247adf39f6172aace09aef819c245d92263a86f4"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jun 09 16:24:22 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:20:27 2017 +0000"
      },
      "message": "gma hsw+: Add boilerplate for DDI buffer translations\n\nChange-Id: I8fcba64a3c663b9eea7fb11088c62ea584d63e04\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20129\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "fdd93659e03396051940988de328f28cdb7d448c",
      "tree": "e20caca16f761188abb51d83efec2ec06ccb8afd",
      "parents": [
        "afadcace9e96289e3aff808c4fac5830c11bdc6c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Feb 08 13:41:38 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:24:14 2017 +0200"
      },
      "message": "gma broxton: Add signal level control for DDI PHYs\n\nOther than for the DDIs of the Core processor series, we don\u0027t select\nsignal levels from a preconfigured set but have to program the indivi-\ndual values.\n\nChange-Id: I3ab4d5e2ed47db0d4ce47a17c4a5fb08b5416bc2\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18425\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "afadcace9e96289e3aff808c4fac5830c11bdc6c",
      "tree": "9cb10bccb194c7504a14c6f7e6f7fd7d97d3e0e6",
      "parents": [
        "4b0239f549c99b1c393f099fe21c7055860fbe7a"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Feb 08 13:41:38 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:23:51 2017 +0200"
      },
      "message": "gma broxton: Implement pre-PLL setup for DDI PHYs\n\nSome lane configuration that\u0027s supposed to happen before enabling\nthe display PLL.\n\nChange-Id: I08ec3ac26164061b19d695ab600d6bb9eeadd7ad\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18424\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "4b0239f549c99b1c393f099fe21c7055860fbe7a",
      "tree": "b76eeed11f3323131d984f59a0bd9f84d50811b2",
      "parents": [
        "f6266004f9c8dcbb7493b409de02048ef209387e"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Feb 07 18:26:51 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:23:33 2017 +0200"
      },
      "message": "gma broxton: Fill in port PLL configuration\n\nPLL parameter selection is a much simplified version of what\u0027s done in\ni915 on Linux. We just assume the error in the resulting clock of a\nvalid parameter tuple is always small enough. Trying to speak mathe-\nmatically, since the only calculated parameter M2 is given as a frac-\ntion of 2^22, the error should stay below 2^-22.\n\nAs the PLLs are tied to specific DDI ports, they won\u0027t ever be shared\namong ports and the allocation boils down to just configuring the PLL.\n\nChange-Id: I206675506f1dbbb57d65bfdc308de1891ccbf61a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18423\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "f6266004f9c8dcbb7493b409de02048ef209387e",
      "tree": "085df262f70edf1296143f247d2b4e2ee830add4",
      "parents": [
        "408204409b3324ae6ae7043826ee5ab7bb45bb2f"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Feb 03 12:17:28 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:23:22 2017 +0200"
      },
      "message": "gma broxton: Implement DDI PHY power handling\n\nDDI PHYs is a concept common to current Atom processor series. It\nseems the PHYs are implemented on the same die as the graphics core\nbut still need to be configured separately. Based on the assumption\nthat we start with disabled PHYs and it was always us if they are\nenabled, we only have to do a small share of what Linux\u0027 i915 does.\n\nv2: Wait for GRC done only if we want to copy its results.\n\nChange-Id: I1e59f80daa08dc64b8c3dff34202ace5dd4c5f73\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18422\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "408204409b3324ae6ae7043826ee5ab7bb45bb2f",
      "tree": "771cd2b63dc548d61a0d3a42f7bce72c7ed3acd6",
      "parents": [
        "21da5741378af7c9f8db23b55aa316a905ae9183"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jan 20 14:00:53 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:22:31 2017 +0200"
      },
      "message": "gma broxton: Start off with power domains and CDClk\n\nIt\u0027s close to the respective code for Skylake but still different\nenough for a separate implementation. We start with a default CDClk\nof 288MHz which is enough for resolutions up to 2560x1600.\n\nChange-Id: I44364191236f421b2b89c9a019a50713f7c20525\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18243\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "bcb2c47c5120ed32d8d9a42990acc3f16f202ad9",
      "tree": "b2b079993c0e44fa3b9e70cb3b7bc2648f25d924",
      "parents": [
        "31a5217d39f95b51dc1fbe452f0e169507ca95d7"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Feb 02 16:39:26 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Mar 14 11:54:47 2017 +0100"
      },
      "message": "gma registers: Add generic Wait() procedure\n\nAdd a more generic Wait() procedure that waits for some masked bits of\na register to hold a specific value.\n\nChange-Id: Iafefce3da8907e7edf00c68e7a8b650aa7bcd372\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18419\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "fbb422015506b6c175ff35d084e5cf267dfc0096",
      "tree": "800db7e4028ed730b7c4c10d08e0252062fd5eae",
      "parents": [
        "3675db58aa729bfb565b61389d3b2568360095af"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Nov 07 15:08:26 2016 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Dec 05 12:35:25 2016 +0100"
      },
      "message": "gma: Implement Ivy Bridge VGA plane workaround\n\nIt\u0027s a documented requirement, even though it doesn\u0027t seem necessary.\n\nChange-Id: Id4f579c1ca34633ee00c771b39e6ff45cdcfbf69\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17277\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Ronald G. Minnich \u003crminnich@gmail.com\u003e\n"
    },
    {
      "commit": "f54d0962018b0443973f84e525e0d112ce956800",
      "tree": "80d5b86e918fab1d92d7455eec2c3590c0d354a8",
      "parents": [
        "125a29e84242900a5556e8a068227e59420c3e1c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Oct 20 14:17:18 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:21:38 2016 +0200"
      },
      "message": "gma: Program PCH_RAWCLK_FREQ register\n\nThis seems to be a scratchpad register to tell later drivers which\nfrequency the platform uses. Linux reads this but never writes the\nregister.\n\nChange-Id: I55af7c7b675da580c7f52d9997262b232019132c\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17071\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "125a29e84242900a5556e8a068227e59420c3e1c",
      "tree": "925c85a1e9a5dc0506c9ccd26cd8ba4e05dd3d33",
      "parents": [
        "be4eaddc67ee3a11b1222db049cd8830491363d9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Oct 18 00:23:54 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 20 13:05:15 2016 +0200"
      },
      "message": "Relicense libgfxinit under GPL v2+\n\nChange-Id: I5d683dda83d23e89955a4d840b5570bd8642834a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17052\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}