)]}'
{
  "log": [
    {
      "commit": "7a740439ed7b301ab30291ece19b63083ed90e79",
      "tree": "a3108ce580850f468992f0345f07a1f76902ea61",
      "parents": [
        "abb16d98d6140936e84e767b2df6a9cdc3e486dc"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed May 30 13:58:27 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 03 20:33:39 2018 +0000"
      },
      "message": "Rename Pos_Type --\u003e Position_Type\n\nYet after few months, it\u0027s already too confusing to me. Let\u0027s reserve\n`Pos` for `Positive` and spell out `Position`.\n\nChange-Id: I3445d20665ae6a993cb0e46d08e8f3148abef40e\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/26696\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "5ef4d605c0f0cdd46d9361ead6df849ea8a17811",
      "tree": "7a6a95e377fcdfb349b8610b2c43845e393bba65",
      "parents": [
        "34be6547c8dc24aa9c8b406bb1fc8d8fcd118a44"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed Dec 13 13:56:47 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue May 29 14:36:45 2018 +0000"
      },
      "message": "Add Start_X and Start_Y offsets for framebuffer panning\n\nFor tiled modes, the offsets add to the stride. To keep things simple,\nwe always assume that they are accounted for (even in linear mode).\n\nTo make the panning visible, the offsets are added in `gfx_test` and\nthe test image is drawn larger by two times the offsets. Also add the\nnew parameters to Dump_Configs() along with the forgotten tiling and\nrotation parameters.\n\nChange-Id: I5d1e1f2ed8b1872a2b82be23a6a622d948f7831f\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/22866\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "9b479412a7e43888f52840e03b57eed710e46af6",
      "tree": "327ed066e30f61d7a284bb787a29c34a8332bd47",
      "parents": [
        "b7470499e80e1910ff078a55ac46a097b7f0c903"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Aug 27 11:55:56 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:26:37 2017 +0000"
      },
      "message": "gma: Add support for rotated framebuffers\n\nAs for the tiling, we enable support for rotated framebuffers on\nplatforms with Plane_Control. On every path where a rotated frame-\nbuffer may be expected, we have to exchange width and height in\ncase of 90 degree rotations. Beside the rotation setting itself,\nthe hardware needs to know the vertical stride instead of the hori-\nzontal and a delicate page mapping in case of 90 degree rotations.\nFor that we divide the GTT space into two, the lower half contains\nthe linear mappings, the upper half mappings for a rotated scanout.\n\nChange-Id: I1c901b7abc0fe7764bee87f6fda58ba9fa3f340d\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/22711\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "b7470499e80e1910ff078a55ac46a097b7f0c903",
      "tree": "ec60955a5f3a7221ddb22ccd93c03409683b7b6c",
      "parents": [
        "0164b024a6b6cff64c41c3b68fd93a925753f38d"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Nov 30 14:48:35 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:26:31 2017 +0000"
      },
      "message": "Add Rotation setting to Framebuffer\n\nAdd a Rotation setting to the Framebuffer type that tells us if the\nframebuffer is rotated by 90, 180 or 270 degrees. The hardware should\nrotate the picture in the opposite direction before display.\n\nTo support more complex memory layouts, we also add a V_Stride (ver-\ntical stride) setting.\n\nChange-Id: I6430fb44b5c9cfcf9fa58684a425e8c2e4647ac3\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/22710\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "0164b024a6b6cff64c41c3b68fd93a925753f38d",
      "tree": "02ebcb40b55ce672a3a093e712eddbf8863f811d",
      "parents": [
        "b03c8f19ae0d7e1f9f27ff258e72a37dfb87f323"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Aug 24 15:12:51 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:26:03 2017 +0000"
      },
      "message": "gma: Set tiled framebuffers up through Plane_Control\n\nOn platforms with Plane_Control registers (Broxton/Skylake+) we can\nuse X and Y tiled framebuffers for scanout (older platforms support\nX tiling only). As our main use case is 90° rotation with Y tiled\nframebuffers, we implement it for the newer platforms only for now.\n\nWe also set up a fence register for linear access to the tiled frame-\nbuffer through the aperture.\n\nChange-Id: I913c82f62fd28b681a06ce13f41160a07e559799\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/22709\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "b03c8f19ae0d7e1f9f27ff258e72a37dfb87f323",
      "tree": "4406950a9497d0683687521c760430a02d907663",
      "parents": [
        "51375ad75a99d395f3843e46783c0743b5fea29b"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Aug 25 13:29:08 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:25:56 2017 +0000"
      },
      "message": "gma registers: Add procedures to set fence registers\n\nThrough fence registers, we can tell the hardware which parts of the\naperture cover tiled framebuffers. Only legacy X and Y tiling is sup-\nported. According to `i915_reg.h` there are 16 fence registers from\nG4x on and 32 from Ivy Bridge on (this only partially matches docu-\nmentation: Haswell has 16 regs documented and the fence registers\nwere not documented at all before).\n\nChange-Id: I02edc99b315e24dc175c6f93aff627e59cb1ff0b\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/22708\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "51375ad75a99d395f3843e46783c0743b5fea29b",
      "tree": "e331ac757e54adeee16b8c9c42c4c3332a00e27a",
      "parents": [
        "e7ac6ebddc771fb7262c5f15decd617deea1bb50"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Aug 24 14:44:06 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Dec 12 14:04:43 2017 +0000"
      },
      "message": "Add Tiling setting to Framebuffer\n\nBeside linear framebuffers, we can, on Intel hardware, easily support X\nand Y tiled framebuffers too. If we access the framebuffer through the\naperture window, we can let the hardware handle the tiling.\n\nTiling generally divides the framebuffer into rectangular pieces of\nfixed size where each piece, or tile, is represented by one page of\nmemory. Even inside one tile, the pixels are not always ordered linearly\nbut either in a row-major (aka. X tiled) or column-major (aka. Y tiled)\nmanner.\n\nChange-Id: I3e6f93caa8f2485a5792d72cfe2e8b3902add7a3\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/22707\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "194e57e6255b5ae47ef5ee2376027b999dea33a0",
      "tree": "1b918764b5412f838cf6c9249ae170cedd43ee66",
      "parents": [
        "bebca13b4d5eb4a3458ee63218fed05ca8ddf6aa"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jul 15 21:15:46 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Aug 28 20:11:28 2017 +0000"
      },
      "message": "gma: Allow offsets /\u003d 0 in Setup_Default_GTT()\n\nHonor the `Offset` field of the given framebuffer and add preconditions\nthat ensure we won\u0027t overflow the GTT or its target address space.\n\nChange-Id: I6577e98e154610228734baee7674ee54b9a922e8\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/20602\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "393aa8a8b62455d69651122d1aa3dacc21dd750c",
      "tree": "88b06915c9a42a3c7a85682620ad3647a625aa8d",
      "parents": [
        "abe3de257c482ebeb90cf9f93d69ae744c60f9a6"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Oct 21 14:18:53 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:24:23 2016 +0200"
      },
      "message": "gma edid: Check expected display type\n\nCheck that the EDID\u0027s digital-input bit matches the expected display\ntype (i.e. it should only be set for non-VGA displays).\n\nChange-Id: I099112f190f866525e882d5e24a428092d4d8331\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17085\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "f54d0962018b0443973f84e525e0d112ce956800",
      "tree": "80d5b86e918fab1d92d7455eec2c3590c0d354a8",
      "parents": [
        "125a29e84242900a5556e8a068227e59420c3e1c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Thu Oct 20 14:17:18 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:21:38 2016 +0200"
      },
      "message": "gma: Program PCH_RAWCLK_FREQ register\n\nThis seems to be a scratchpad register to tell later drivers which\nfrequency the platform uses. Linux reads this but never writes the\nregister.\n\nChange-Id: I55af7c7b675da580c7f52d9997262b232019132c\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17071\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "125a29e84242900a5556e8a068227e59420c3e1c",
      "tree": "925c85a1e9a5dc0506c9ccd26cd8ba4e05dd3d33",
      "parents": [
        "be4eaddc67ee3a11b1222db049cd8830491363d9"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Oct 18 00:23:54 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Oct 20 13:05:15 2016 +0200"
      },
      "message": "Relicense libgfxinit under GPL v2+\n\nChange-Id: I5d683dda83d23e89955a4d840b5570bd8642834a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17052\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}