)]}'
{
  "log": [
    {
      "commit": "8469b0089aa06fe196e23a2853d81d661cd21de8",
      "tree": "e91813715de2c0454983cc5a31e7b07fb99eccdc",
      "parents": [
        "6b4678d6aad8c9025c6e5b649a6af36cfe0b3d61"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Sep 22 21:31:52 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Oct 18 12:37:14 2019 +0000"
      },
      "message": "gma bxt: Implement CDClk switching\n\nAgain, very similar procedure to the previous generations. The\nCDClk is limited to 624MHz (no fuses). Dot clocks can run at the\nfull CDClk speed.\n\nIf all pipes are disabled, we set CDClk to its reference rate.\nIn this state, the display engine is not operational and neither\nare the DP Aux ports. So we have to implement Enable_CDClk() to\nallow display probing without any pipe enabled.\n\nChange-Id: I7bccbce0625a9893e2dd5c06fd1475a44987989d\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35718\nReviewed-by: Matt DeVillier \u003cmatt.devillier@gmail.com\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "312433cd3d90ebd5ee44bc1795b10e3846c1f96c",
      "tree": "b9797382071153359c87386163f70bdfbd074da0",
      "parents": [
        "82ca09f1f372200046dad13db6e81829ff067caf"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Sep 28 03:15:48 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Oct 04 21:34:26 2019 +0000"
      },
      "message": "gma pcode: Move and revise mailbox handling\n\nUnify the PCODE mailbox implementations (Linux\u0027 i915 uses the same\nimplementation since Sandy Bridge, too) and add `Wait` and `Success`\nparameters so we can act correctly if something failed. This adds\na lot of boilerplate. But we keep it contained in the new package\n`PCode` and the code outside it looks cleaner and handles errors\nmore gracefully.\n\nIn GNATprove, we track state of the mailbox\u0027 readiness in a ghost\nvariable `Mailbox_Ready`. This allows us to skip the initial wait\nloop if we know that we already waited at the end of a previous\ncall. The first call to a mailbox procedure has to be made with\n`Wait_Ready \u003d\u003e True`.\n\nAlso, start to experiment with a `use` clause for the `Register`\npackage. It allows us to write a little more condensed code, with-\nout sacrificing much (in this program we can expect that `Read`/\n`Write` means register access?) So far it looks good?\n\nChange-Id: I5daa3effb7ab774e4a35bd8794b0f67f57e4caa4\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35710\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n"
    },
    {
      "commit": "1ee571400d687a6a2c2139b2dccead2dcfa4fad1",
      "tree": "89e343bf61dbb868232ca91a5adacd08abaada21",
      "parents": [
        "ef3b0939944b9eac06ca9cfafe5256b7f81bd175"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 10 12:42:46 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon May 06 16:30:53 2019 +0000"
      },
      "message": "gma broxton power/clocks: Turn pre-condition into code\n\nIn case `Config.Default_CDClk_Freq` is not constant, we have\nto filter it.\n\nChange-Id: I3ccafdc91a6e11fdc565e154f1394598a4572449\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/27054\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "565f33b23e3e8e223702d07d768f9f2a11dd5686",
      "tree": "895232e2b13e52bc62eed99a3d2aacff96e1a7a0",
      "parents": [
        "b679013ce61fcfae5e33375cc71a757bfa73eb95"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 04 14:42:13 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Jun 08 14:44:09 2018 +0000"
      },
      "message": "gma broxton: Tighten types to rely less on proof inlining\n\nChange-Id: I2ff61484715461026463be7fbc45c283e75c903b\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/26842\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "d1988d1a033d4d12b48cbc6640984ef3b143fd30",
      "tree": "9ece798e34f1a48a6cff2bbf3dd14208de0a564f",
      "parents": [
        "7628493a7e7acaba93d607db008a59ec8fa8eebe"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 16:27:57 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Apr 03 12:59:42 2018 +0000"
      },
      "message": "gma: Make Raw_Clock a variable\n\nOn GMCH the Raw_Clock depends on the FSB frequency.\n\nChange-Id: I11af9ecb3504983ba1d3136c1b82bd14363afdba\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/25403\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "01b680ff020b1bcc9e5d8a864affd47bac75488b",
      "tree": "7800b9c5ed6c760e2f7f81335b17b94c66d9e09f",
      "parents": [
        "247adf39f6172aace09aef819c245d92263a86f4"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jun 09 16:24:22 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:20:27 2017 +0000"
      },
      "message": "gma hsw+: Add boilerplate for DDI buffer translations\n\nChange-Id: I8fcba64a3c663b9eea7fb11088c62ea584d63e04\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20129\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "247adf39f6172aace09aef819c245d92263a86f4",
      "tree": "e1d886b8030deaa9222a4f165fb3ac914a3d6a23",
      "parents": [
        "0923b795fe51df4431061fa8b44d975aa8027f52"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Mon Jun 12 14:39:11 2017 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Jul 25 20:15:32 2017 +0000"
      },
      "message": "gma hsw+: Add default value for HDMI buffer levels\n\nAdd a configuration option to override the default HDMI translation.\nIt\u0027s not exported yet, as we\u0027ve never seen a non-default value being\nused. So this is just to have a common place for the defaults.\n\nAlso sets the recommended default value for Broxton as defined in the\nPRM.\n\nChange-Id: I59fae0fb4f444d9193a98b6a0edf337ecbba3b62\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/20165\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "fdd93659e03396051940988de328f28cdb7d448c",
      "tree": "e20caca16f761188abb51d83efec2ec06ccb8afd",
      "parents": [
        "afadcace9e96289e3aff808c4fac5830c11bdc6c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Feb 08 13:41:38 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:24:14 2017 +0200"
      },
      "message": "gma broxton: Add signal level control for DDI PHYs\n\nOther than for the DDIs of the Core processor series, we don\u0027t select\nsignal levels from a preconfigured set but have to program the indivi-\ndual values.\n\nChange-Id: I3ab4d5e2ed47db0d4ce47a17c4a5fb08b5416bc2\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18425\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "afadcace9e96289e3aff808c4fac5830c11bdc6c",
      "tree": "9cb10bccb194c7504a14c6f7e6f7fd7d97d3e0e6",
      "parents": [
        "4b0239f549c99b1c393f099fe21c7055860fbe7a"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Feb 08 13:41:38 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:23:51 2017 +0200"
      },
      "message": "gma broxton: Implement pre-PLL setup for DDI PHYs\n\nSome lane configuration that\u0027s supposed to happen before enabling\nthe display PLL.\n\nChange-Id: I08ec3ac26164061b19d695ab600d6bb9eeadd7ad\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18424\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "4b0239f549c99b1c393f099fe21c7055860fbe7a",
      "tree": "b76eeed11f3323131d984f59a0bd9f84d50811b2",
      "parents": [
        "f6266004f9c8dcbb7493b409de02048ef209387e"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Feb 07 18:26:51 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:23:33 2017 +0200"
      },
      "message": "gma broxton: Fill in port PLL configuration\n\nPLL parameter selection is a much simplified version of what\u0027s done in\ni915 on Linux. We just assume the error in the resulting clock of a\nvalid parameter tuple is always small enough. Trying to speak mathe-\nmatically, since the only calculated parameter M2 is given as a frac-\ntion of 2^22, the error should stay below 2^-22.\n\nAs the PLLs are tied to specific DDI ports, they won\u0027t ever be shared\namong ports and the allocation boils down to just configuring the PLL.\n\nChange-Id: I206675506f1dbbb57d65bfdc308de1891ccbf61a\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18423\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "f6266004f9c8dcbb7493b409de02048ef209387e",
      "tree": "085df262f70edf1296143f247d2b4e2ee830add4",
      "parents": [
        "408204409b3324ae6ae7043826ee5ab7bb45bb2f"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Feb 03 12:17:28 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:23:22 2017 +0200"
      },
      "message": "gma broxton: Implement DDI PHY power handling\n\nDDI PHYs is a concept common to current Atom processor series. It\nseems the PHYs are implemented on the same die as the graphics core\nbut still need to be configured separately. Based on the assumption\nthat we start with disabled PHYs and it was always us if they are\nenabled, we only have to do a small share of what Linux\u0027 i915 does.\n\nv2: Wait for GRC done only if we want to copy its results.\n\nChange-Id: I1e59f80daa08dc64b8c3dff34202ace5dd4c5f73\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18422\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "408204409b3324ae6ae7043826ee5ab7bb45bb2f",
      "tree": "771cd2b63dc548d61a0d3a42f7bce72c7ed3acd6",
      "parents": [
        "21da5741378af7c9f8db23b55aa316a905ae9183"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jan 20 14:00:53 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:22:31 2017 +0200"
      },
      "message": "gma broxton: Start off with power domains and CDClk\n\nIt\u0027s close to the respective code for Skylake but still different\nenough for a separate implementation. We start with a default CDClk\nof 288MHz which is enough for resolutions up to 2560x1600.\n\nChange-Id: I44364191236f421b2b89c9a019a50713f7c20525\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18243\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "21da5741378af7c9f8db23b55aa316a905ae9183",
      "tree": "64d43912915ee62a2ff6953dbe7270e2c61acf02",
      "parents": [
        "b83107c60fbabfaf8db02a506fb4693b90363691"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jan 20 14:00:53 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:19:33 2017 +0200"
      },
      "message": "gma: Add config plus stubs for Broxton SoC\n\nCurrent plan is to support all DDI outputs of Apollo Lake. This\nincludes one eDP (DDI A) and two fully fledged DDIs (B, C) that can\nbe either configured to DP 1.2 or HDMI 1.4. MIPI/DSI outputs won\u0027t\nbe supported for now.\n\nSince there doesn\u0027t exist any public documentation, the code will be\nsolely based on analysis of Linux\u0027 i915 driver.\n\nEverything is a stub. In the existing code, at least DDI configu-\nration will also have to be adapted.\n\nv2: Escape hash characters in config file\n\nChange-Id: I4a79d4531d238049ba00ab4f03e270e6b58f81ab\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18421\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    }
  ]
}