)]}'
{
  "log": [
    {
      "commit": "e9631d836054e30f25b11f7bdfba48f851989b5c",
      "tree": "18cb359b58bef471f8ff8c1c12905b9a1b15ab75",
      "parents": [
        "605660bb2180acc07aad4ac11da2b28d6192d7b0"
      ],
      "author": {
        "name": "Tim Wawrzynczak",
        "email": "twawrzynczak@chromium.org",
        "time": "Fri Sep 09 12:26:32 2022 -0600"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon May 29 19:22:30 2023 +0000"
      },
      "message": "gma: Begin Alder Lake (ADL) integration\n\nAlder Lake uses the same generation of igfx engine as Tiger Lake,\ntherefore the changes required to support ADL-P are minor. This patch\nstarts with PCI device detection.\n\nChange-Id: Ia9ab283b388735c4dd01c710251057c12b90b18e\nSigned-off-by: Tim Wawrzynczak \u003ctwawrzynczak@chromium.org\u003e\nSigned-off-by: Jeremy Compostella \u003cjeremy.compostella@intel.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/70888\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Sean Rhodes \u003csean@starlabs.systems\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "605660bb2180acc07aad4ac11da2b28d6192d7b0",
      "tree": "d1440b51ab228b826b92326f8aecad506b9460fd",
      "parents": [
        "0dadb674cc98974378ccceccc8c557197a2bad16"
      ],
      "author": {
        "name": "Tim Wawrzynczak",
        "email": "twawrzynczak@chromium.org",
        "time": "Wed Jun 08 12:48:19 2022 -0600"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon May 29 19:22:30 2023 +0000"
      },
      "message": "gma: Begin Tiger Lake (TGL) integration\n\nTiger Lake\u0027s integrated graphics engine is built off an entirely new\nigfx architecture named \"Iris Xe\". This patch adds just enough support\nto compile for Tiger Lake. Fortunately, the backlight programming\nhasn\u0027t changed since SKL, so with a little bit of hacking, one can\nalso have libgfxinit turn on the backlight to verify something is\nworking and running.\n\nThe first pass through the support will focus mostly on the eDP panel,\nthen Type-C ports (both in fixed/native mode [DP/HDMI] and in Type-C\nDP Alt Mode). TBT will not be mostly ignored in this first pass, as\nit is not as widely used (yet?) as the other protocols.\n\nThis patch includes changes to fix ironlake gnatprove errors caused by\nthe new PCH_HDMI_A port definition.\n\nTested on google/voxel, with DEBUG_ADA_CODE enabled.\nTested on google/skolas, with DEBUG_ADA_CODE enabled.\n\nThis patch leaves the following unresolved gnatprove errors:\n- hw-gfx-gma-port_detect.ads:17:14:\n     warning: subprogram \"Initialize\" has no effect\n- hw-gfx-gma-port_detect.ads:20:07:\n     warning: unused variable \"Port\"\n- hw-gfx-gma-port_detect.ads:23:14:\n     warning: subprogram \"Clear_Hotplug_Detect\" has no effect\n- hw-gfx-gma-connectors.ads:39:14:\n     warning: subprogram \"Post_Off\" has no effect\n- hw-gfx-gma-connectors.ads:42:14:\n     warning: subprogram \"Post_All_Off\" has no effect\n\nThese errors will by addressed by the proper implementation of these\nprocedures.\n\nChange-Id: I84f15837856ecc5ec8df18b39d3989885cd550d4\nSigned-off-by: Tim Wawrzynczak \u003ctwawrzynczak@chromium.org\u003e\nSigned-off-by: Jeremy Compostella \u003cjeremy.compostella@intel.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/70887\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Sean Rhodes \u003csean@starlabs.systems\u003e\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "e79babd08dec690b3ed44882af8660ff241260f7",
      "tree": "bebf0c33a538b5169cf3345112dd85aefd48a12e",
      "parents": [
        "c9ad9de6ce8109b125e75976c24f2c868730c94e"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Dec 20 01:33:26 2020 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Mon Dec 21 17:39:56 2020 +0000"
      },
      "message": "gma: Introduce `PCH_Type`\n\nWe got this far without it but now there is a PCH (Cannon Point)\nthat is not fully compatible to its predecessors but works with\nthe same CPUs. First, introduce the type and make use of it in a\nfew cases. In a follow-up, we\u0027ll add the new PCH.\n\nChange-Id: I9d4965f110da3613749023143cf75123e63ae76e\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/48762\nReviewed-by: Michael Niewöhner \u003cfoss@mniewoehner.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n"
    },
    {
      "commit": "5dbaf4bb1d30b27f5b8988a28820beda48f3a46c",
      "tree": "11b5b8a98dec8d5e8fe11c9668e524fef5b6e578",
      "parents": [
        "1f63d51dc055276fa1a0f3552bf1bfc1a07ad8bb"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Wed Jan 08 17:24:58 2020 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Mar 05 15:15:41 2020 +0000"
      },
      "message": "gma bxt panel: Allow to use secondary panel control logic\n\nBroxton has control logic for two panels. Reflect that.\n\nFlow analysis fails if we initialize globals in Setup_PP_Sequencer.\nHence, move the call to Static_Init out.\n\nChange-Id: Ie84d21a07a0f064f993a54b277e051b8d1ca541c\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/38276\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n"
    },
    {
      "commit": "8a6e7bd43caef134bcb9616da9be3b4344850123",
      "tree": "e4ea68ea709dcdbbf09de27177b4e4a639ce4fab",
      "parents": [
        "8beafd74958561988d29ba0897e057d4f3204a27"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Tue Jan 07 16:36:38 2020 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Mar 05 15:12:11 2020 +0000"
      },
      "message": "gma panel config: Turn `internal display type` into a `panel port`\n\nInstead of querying for the type of the internal display (LVDS vs. DP),\nmake it a choice of the port that has a panel hooked up. As some plat-\nforms actually have support for two panels, we prepare for that by\nnaming it `Panel_1_Port`.\n\nWe still need to call into the panel logic, when the respective port\nis enabled. This will be done in the next commit.\n\nChange-Id: Id3c78441857d07fb34274b9abd3ae6ea42909ff6\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/38242\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "7f3e280f0233958f5c858e19a3b80c3fdd50a83f",
      "tree": "49d1db89829d320c80a45984edf7e8df1b9398cd",
      "parents": [
        "9a4c4c3024a20bfe134bf93ca04a3634848dbd39"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Sep 28 20:40:55 2019 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Fri Oct 04 22:15:54 2019 +0000"
      },
      "message": "gma: Give GM45 its own designation (separate from G45)\n\nWhile G45 and GM45 have mostly the same display engine (seem to\nonly differ in the available outputs), they are driven by very\ndifferent clock sources. To derive the corret CDClk in a later\ncommit, we\u0027ll have to distinguish between the two.\n\nChange-Id: I99bbd0582a03a9e2806ef2ebf63e466ec40133b3\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/35711\nReviewed-by: Patrick Georgi \u003cpgeorgi@google.com\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-by: Angel Pons \u003cth3fanbus@gmail.com\u003e\n"
    },
    {
      "commit": "6a996dc7bafc5a1b56c7cd9d1a00a6f8ef5617fd",
      "tree": "f32fea3ae624618c93ad7c1f428a96ff488c5322",
      "parents": [
        "adfe11fec3f2fcca99be6b43bf4d33eb4aaf99d7"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 17 16:30:33 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed May 08 13:20:25 2019 +0000"
      },
      "message": "gma: Implement automatic CPU detection\n\nIn dynamic CPU configurations, Config.Detect_CPU() sets the CPU\nvariables according to the given PCI device id. In static confi-\ngurations it does nothing.\n\nWe update the default configs to make use of this feature where\napplicable. This should still give us full build-test coverage\nwhile cutting the amount of tests in half.\n\nChange-Id: I8ce31c867f97c8d6ef99ca096cb45f7719e78a19\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/27138\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "6621a14e33fe864965ef524d4b301fdc62a2ad48",
      "tree": "b5dacff889bb81d21be04e1e0e55cf871b60c1dc",
      "parents": [
        "c76749db2b798a7f7fff9557ad53d97dc4f95225"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Thu Jun 07 23:56:54 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Wed May 08 11:40:39 2019 +0000"
      },
      "message": "gma: Introduce Generation type\n\nIt\u0027s the subset of `CPU_Type` that we have different compilation units\nfor. Also use it in the `Config` wherever we can decide something purely\non the `Generation` (i.e. don\u0027t mix `Gen` and `CPU` in expressions).\n\nChange-Id: I5061021a80cd75ee3d7996ca343e6388b22bf341\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/c/libgfxinit/+/27059\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "73ea03245445527a80b70e41cf4a910371014ca0",
      "tree": "210fafb8ff5631b2946bdd4511271293b2f8a27c",
      "parents": [
        "d5198445517c361b30f4521e52b953d2a7928a70"
      ],
      "author": {
        "name": "Arthur Heymans",
        "email": "arthur@aheymans.xyz",
        "time": "Wed Mar 28 17:17:07 2018 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Jun 03 20:33:18 2018 +0000"
      },
      "message": "gma: Add G45 support\n\nThe following ports are implemented: HDMI/DVI, VGA, LVDS and DP.\n\nTested with gfx_test and coreboot on a Thinkpad X200 (GM45).\n\nChange-Id: Ifc05a1516329a61772af84558e5bfceb4d4ca277\nSigned-off-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\nReviewed-on: https://review.coreboot.org/21295\nReviewed-by: Nico Huber \u003cnico.h@gmx.de\u003e\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\n"
    },
    {
      "commit": "21da5741378af7c9f8db23b55aa316a905ae9183",
      "tree": "64d43912915ee62a2ff6953dbe7270e2c61acf02",
      "parents": [
        "b83107c60fbabfaf8db02a506fb4693b90363691"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Jan 20 14:00:53 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Jun 03 15:19:33 2017 +0200"
      },
      "message": "gma: Add config plus stubs for Broxton SoC\n\nCurrent plan is to support all DDI outputs of Apollo Lake. This\nincludes one eDP (DDI A) and two fully fledged DDIs (B, C) that can\nbe either configured to DP 1.2 or HDMI 1.4. MIPI/DSI outputs won\u0027t\nbe supported for now.\n\nSince there doesn\u0027t exist any public documentation, the code will be\nsolely based on analysis of Linux\u0027 i915 driver.\n\nEverything is a stub. In the existing code, at least DDI configu-\nration will also have to be adapted.\n\nv2: Escape hash characters in config file\n\nChange-Id: I4a79d4531d238049ba00ab4f03e270e6b58f81ab\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/18421\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Arthur Heymans \u003carthur@aheymans.xyz\u003e\n"
    },
    {
      "commit": "799752fd03c77f2d449352eac16c6c33391dc2fa",
      "tree": "c0eb141f48d56a9f649c040ef4ec163c2b3b4fa0",
      "parents": [
        "ac455ad15a7acfec0ae1e1046fe10aa28358d6a5"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Mar 05 23:54:22 2017 +0100"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Tue Mar 28 18:45:09 2017 +0200"
      },
      "message": "configs: Escape hash characters\n\nChange-Id: I5b21d7a5310767ea2fd3aebd81b83044e8eec7f2\nSigned-off-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-on: https://review.coreboot.org/18785\nReviewed-by: Paul Menzel \u003cpaulepanter@users.sourceforge.net\u003e\nReviewed-by: Philippe Mathieu-Daudé \u003cphilippe.mathieu.daude@gmail.com\u003e\nReviewed-by: Martin Roth \u003cmartinroth@google.com\u003e\n"
    },
    {
      "commit": "d55afebf8bc03f87d1a8b8f92144c2f8da6ca0ae",
      "tree": "7703f06d76adeaf58b1fd9c8980716410c92909d",
      "parents": [
        "393aa8a8b62455d69651122d1aa3dacc21dd750c"
      ],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Fri Oct 21 14:31:10 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sat Oct 29 01:26:13 2016 +0200"
      },
      "message": "gma i2c: Make I2C port for VGA displays a config option\n\nBoards with a DVI-I connector share the I2C pins for both analog and\ndigital displays. In that case, the EDID for a VGA display has to be\nread over the I2C interface of the coupled digital port.\n\nTEST\u003dBooted kontron/ktqm77 with DVI-I to VGA cable. Display is detected\n     and enabled (but doesn\u0027t show anything, yet?).\n\nChange-Id: I5c4f77d5ad1927f075877a3719361ed2193f4c39\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\nReviewed-on: https://review.coreboot.org/17086\nTested-by: Nico Huber \u003cnico.h@gmx.de\u003e\nReviewed-by: Stefan Reinauer \u003cstefan.reinauer@coreboot.org\u003e\n"
    },
    {
      "commit": "83693c8d7d87f5cebe120abdf25951c9e212b319",
      "tree": "249eff589087c2ed8deeeeda1710ff49a3c3c810",
      "parents": [],
      "author": {
        "name": "Nico Huber",
        "email": "nico.huber@secunet.com",
        "time": "Sat Oct 08 22:17:55 2016 +0200"
      },
      "committer": {
        "name": "Nico Huber",
        "email": "nico.h@gmx.de",
        "time": "Sun Oct 09 11:34:25 2016 +0200"
      },
      "message": "Initial upstream commit\n\nThe history contained unlicensed code so everything got squashed, sorry.\n\nChange-Id: I9f5775208f9df6fb29074bf3bc498f68cb17b3a0\nSigned-off-by: Nico Huber \u003cnico.huber@secunet.com\u003e\n"
    }
  ]
}